Low-temperature vibrational properties of tin nanoparticles in porous glass

The heat capacity has been studied in the temperature range 2.2–40 K and in magnetic fields up to 2 T in tin, which has been embedded in nanometer-size pores in glass having diameter ∼7 nm, in bulk tin and in glass with empty pores. Comparison of the properties of tin nanoparticles and bulk tin has been performed. An increase in the coefficient of electronic heat capacity has been found in nanostructured tin as compared with the bulk tin, and also a considerable deviation of the low-temperature lattice heat capacity from the Debye law in the temperature region T > 3 K has been found. The fact that the density of thermal vibrations in nanocrystalline tin for low energies is higher than in bulk tin has been established using low-temperature heat capacity data.     

Solidification of tin on quasicrystalline surfaces

A two-phase alloy of β-Sn and Al₆₃Cu₂₅Fe₁₂ quasicrystal produced by melt-spinning was annealed and aged to form various microstructures of tin in a quasicrystalline (QC) or microcrystalline (MC) matrix. The morphology and structure of the interfaces was studied by scanning and transmission electron microscopy and was related to melting and solidification behavior of tin studied by differential scanning calorimetry. In a MC matrix the tin phase occurred as nanoparticles and solidified with an undercooling of about 35°C. In a QC matrix, tin formed intergranular layers on faceted matrix grains. Tin showed multiple solidification peaks in undercooling ranging from 8°C to 43°C, indicating several distinct nucleation sites which compete with each other and are selected kinetically. The interfacial energy (depending on the structural state of the matrix) had a more dominating effect on the solidification of tin than the size, shape and the distribution of the tin particles. It was also concluded that solidification of tin is easier on quasicrystalline surfaces than on aluminum.     

Atomic dynamics of tin nanoparticles embedded into porous glass

The method of resonant nuclear inelastic absorption of synchrotron radiation has been used to study the phonon spectrum for tin nanoparticles (with a natural isotope mixture) embedded into a porous glassy (silica) matrix with an average pore diameter of 7 nm in comparison to the analogous spectrum of bulk tin enriched with ¹¹⁹Sn isotope. Differences between the spectra have been observed, which are related to both the dimensional effects and specific structural features of the porous glass-tin nanocomposite. Peculiarities in the dynamics of tin atoms embedded into nanopores of glass are interpreted in terms of a qualitative model of the nanocomposite structure.     

Electron spectroscopic studies of tin surface segregation on iron single crystal surfaces

AES, ELS, LEED and XPS investigations of the surface segregation of tin dissolved in a Fe-4wt%Sn alloy were performed in ultra-high vacuum at elevated temperatures. The three low indexed surface orientations (100), (110) and (111) were studied. In all cases, no dependence of the maximum tin surface coverage on temperature was detected within the temperature range from 450 to 650°C. An order-disorder transition was observed by LEED, AES and XPS for the (100) oriented surface during tin segregation. The binding state for the segregated tin atoms abruptly changes at the order-disorder transition as determined by XPS. Similar results were obtained for the (111) surface. A deviating behaviour was observed for the (110) surface orientation, where two different ordered hexagonal surface structures were detected by LEED during tin surface enrichment. The first structure is similar to the diamond structure of pure tin, and the second one corresponds to the formation of a thin layer of the intermetallic compound FeSn on the (110) surface. The electron binding energies of the segregated tin atoms determined by XPS increase with increasing tin coverage on the (110) oriented surface. ELS studies on (100) and (111) oriented surfaces saturated with segregated tin show in comparison with literature data of pure tin a surface plasmon loss peak but no signal for the corresponding bulk loss. An energy loss signal found only for the (110) surface at Sn saturation coverage seems to be characteristic of an intermetallic FeSn surface phase.     

Effects of thermal oxidation temperature on vacuum evaporated tin dioxide film

In order to investigate the effect of thermal oxidation temperature on tin dioxide (SnO₂), tin dioxide films were obtained on quartz substrates by vacuum evaporation of tin metal. The films were characterized by X-ray diffraction (XRD) analyses, scanning electron microscopy (SEM), temperature dependent electrical resistivity measurement and optical absorption spectroscopy. The SEM images showed that the films are dense, continuous and are composed of nanoparticles and particle sizes are increased after thermal oxidation. From the X-ray measurement results, the films indicated two strong reflection peaks of tetragonal structure in the orientations of (1 0 1) and (2 0 0) at 2θ = 33.89° and 37.95°, respectively. Intensity of the peaks increased with increasing thermal oxidation temperature. We found resistivity values of about 10⁻⁴ Ω-cm. Optical absorption spectra of the films in the UV–Vis spectral range revealed that optical band gap (E_g) value of the films increases with increasing thermal oxidation temperature.     

Temperature dependent structural and optical properties of tin oxide nanoparticles

Nanocrystalline tin oxide (SnO₂) powders were synthesized through wet chemical route using tin metal as precursor. The morphology and optical properties, as well as the effect of sintering on the structural attributes of SnO₂ particles were analyzed using Transmission electron microscopy (TEM), UV–visible spectrophotometry (UV–vis) and X-ray diffraction (XRD), respectively. The data revealed that the lattice strain plays a significant role in determining the structural properties of sintered nanoparticles. The particle size was found to be 5.8 nm, 19.1 nm and 21.7 nm for samples sintered at 300 °C, 500 °C, and 700 °C, respectively. Also, the band gaps were substantially reduced from 4.1 eV to 3.8 eV with increasing sintering temperatures. The results elucidated that the structural and optical properties of the SnO₂ nanoparticles can be easily modulated by altering sintering temperature during de novo synthesis.     

Ab initio calculation and synchrotron X-ray spectroscopy investigations of tin oxides near the Sn <Emphasis Type="Italic">L</Emphasis><Subscript>3</Subscript> absorption edges

The results of theoretical and experimental investigations of the electron-energy structure of the conduction band of tin oxides have been presented. The Sn L ₃ X-ray absorption near-edge fine structure (XANES) has been calculated for the first time for single crystals of metallic tin and tin monoxide, as well as for the orthorhombic and tetragonal phases of tin dioxide, using the linearized augmented plane wave (LAPW) method. The fine structure of the XANES spectra has been compared with the specific features of the energy distribution of the local partial densities of states of the tin compounds under investigation. A joint analysis of the results of the simulation and the experimental X-ray synchrotron Sn L ₃ XANES spectra of commercial bulk samples of metallic tin and tin oxides SnO and SnO₂ has been carried out.     

Effect of doping and annealing on the physical properties of ZnO:Mg nanoparticles

Well-dispersed undoped and Mg-doped ZnO nanoparticles with different doping concentrations at various annealing temperatures are synthesized using basic chemical solution method without any capping agent. To understand the effect of Mg doping and heat treatment on the structure and optical response of the prepared nanoparticles, the samples are characterized using X-ray diffraction (XRD), energy-dispersive X-ray (EDX), UV–Vis optical absorption, photoluminescence (PL), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) measurements. The UV–Vis absorbance and PL emission show a blue shift with increasing Mg doping concentration with respect to bulk value. UV–Vis spectroscopy is also used to calculate the band-gap energy of nanoparticles. X-ray diffraction results clearly show that the Mg-doped nanoparticles have hexagonal phase similar to ZnO nanoparticles. TEM image as well as XRD study confirm the estimated average size of the samples to be between 6 and 12 nm. Furthermore, it is seen that there was an increase in the grain size of the particles when the annealing temperature is increased.     

Structural, optical and electrical characterization of antimony-substituted tin oxide nanoparticles

Antimony-doped tin oxide (ATO) nanostructures were prepared using chemical precipitation technique starting from SnCl₂, SbCl₃ as precursor compounds. The antimony composition was varied from 5 to 20 wt%. The lower resistance was observed at composition of Sn:95 and Sb:05, when compared with undoped and higher doping concentration of antimony. The average crystalline size of undoped and doped tin oxide was calculated from the X-ray diffraction (XRD) pattern and found to be in the range of 30-11 nm and it was further confirmed from the transmission electron microscopy (TEM) studies. The scanning electron microscopy (SEM) analysis showed that the nanoparticles agglomerates forming spherical-shaped particles of few hundreds nanometers. The samples were further analyzed by energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and electrical resistance measurements.     

Tin/Indium nanobundle formation from aggregation or growth of nanoparticles

Shape and size controlled gram level synthesis of tin/indium (SnIn) alloy nanoparticles and nanobundles is reported. Poly(N-vinylpyrrolidone) (PVP) was employed as a capping agent, which could control the growth and structure of the alloy particles under varying conditions. Transmission electron microscopy showed that unique SnIn alloy nanobundles could be synthesized from the bulk materials above a certain concentration of PVP and below this concentration, discrete spherical nanoparticles of variable size were evolved. The morphology and the composition of the as-synthesized SnIn alloy nanobundles were investigated by high-resolution transmission electron microscopy (TEM). The possible mechanisms on the formation of these structures were discussed.