Stimulated Raman backward scattering of a laser beam in a magnetized plasma

Stimulated Raman scattering of a laser beam is investigated in the plasma with strong self generated magnetic field. The magnetized plasma supports various localized radial and azimuthal modes of lower hybrid frequencies. The density fluctuations due to lower hybrid modes couple with the oscillating velocity due to the pump, and drive the scattered wave. Equations describing the Raman process are derived and effects of various modes are studied on the growth rate analytically. Self generated magnetic field has a strong localization effect on the Raman process and growth rate is maximum for radial eigen mode number q = 0 and azimuthal eigen mode number l = 3. The frequency shift has signatures of self generated magnetic field and could serve as a diagnostic.     

Permanent magnet applications

Rare-earth permanent magnets are ideally suited to generate magnetic fields comparable to their spontaneous polarization J_S. Near-square hysteresis loops and large values of the coercivity and anisotropy fields greatly simplify magnet design, as each magnet block is effectively transparent to the magnetic fields produced elsewhere in the magnet assembly. The fields generated by compact and efficient magnet structures requiring no continuous expenditure of energy can be static or variable, uniform or nonuniform. Permanent magnets are fully competitive with electromagnets for fields up to 2 T, and fields as high as to 5 T can be produced in a small volume. When a field with a rapid spatial variation is required, permanent magnets may offer the only practicable solution. Both permanent magnet structures and the uses to which they are put are reviewed, classifying the magnet applications in terms of the nature of the field, the effect on the magnet and the physical effect exploited.     

Rare earth free exchange spring magnet FeCo/FePt(001): Giant magnetic anisotropy and energy product

Using the full potential linearized augmented plane wave (FLAPW) method, we have investigated the thickness dependent magnetic properties of rare earth free exchange spring magnet FeCo/FePt(001). The FeCo adlayer thickness is increased from one monolayer (ML) to four ML coverage. It is observed that the FeCo adlayers and Fe atoms in FePt substrate show almost half metallic behavior, while an ordinary metallic feature is found in Pt atoms. The average magnetization increases with FeCo thickness and the estimated maximum energy product reaches 66 MGOe in FeCo(4 ML)/FePt(001). A giant perpendicular magnetocrystalline anisotropy (MCA) energy of 18.20 meV/cell is found in pure FePt(001) and it becomes 17.35 meV/cell even in FeCo(4 ML)/FePt(001). In addition, we find very large coercivity field in FeCo/FePt(001) systems. For instance, the calculated maximum coercivity field in FeCo(4 ML)/FePt(001) is about 188 kOe. Both energy product and coercivity field calculations may imply that the FeCo/FePt can be utilized for potential rare earth free exchange spring magnet material.     

Size effects on characteristic magnetic fields of a spin-valve multilayer by computer simulation

The change in characteristic magnetic fields of a spin-valve multilayer is investigated as a function of the size by computer simulation. The spin-valve modeled in this work is IrMn (9 nm)/CoFe (4 nm)/Cu (2.6 nm)/CoFe (2 nm)/NiFe (6 nm). The spin-valve dimensions are varied widely from 20 mm×10 mm to 0.5 μm×0.25 μm, but the aspect ratio defined by the ratio of the length to the width is fixed at 2.0. The magnetostatic interactions begin to affect the magnetic properties substantially at a spin-valve length of 5 μm, and, at a length of 1 μm, they become even more dominant. The main consequences of the magnetostatic interactions are a significant increase of the coercivity and a very large shift of the bias field in both the pinned and free layers. It is shown that these changes can be explained by two separate contributions to the total magnetostatic interactions: the coercivity change by the self-demagnetizing field and the change of the bias field by the interlayer magnetostatic interaction field.     

Magnetically actuated bi-directional microactuators with permalloy and Fe/Pt hard magnet

Bi-directional polyimide (PI) electromagnetic microactuator with different geometries are designed, fabricated and tested. Fabrication of the electromagnetic microactuator consists of 10 μm thick Ni/Fe (80/20) permalloy deposition on the PI diaphragm by electroplating, high aspect ratio electroplating of copper planar coil with 10 μm in thickness, bulk micromachining, and excimer laser selective ablation. They were fabricated by a novel concept avoiding the etching selectivity and residual stress problems during wafer etching. A mathematical model is created by ANSYS software to analyze the microactuator. The external magnetic field intensity (H_ext) generated by the planar coil is simulated by ANSYS software. ANSYS software is used to predict the deflection angle of the microactuator. Besides, to provide bi-directional and large deflection angle of microactuator, hard magnet Fe/Pt is deposited at a low temperature of 300 °C by sputtering onto the PI diaphragm to produce a perpendicular magnetic anisotropic field. This magnetic field can enhance the interaction with H_ext to induce attractive and repulsive bi-directional force to provide large displacement. The results of magnetic microactuator with and without hard magnets are compared and discussed. The preliminary result reveals that the electromagnetic microactuator with hard magnet shows a greater deflection angle than that without one.     

Quantitative two-dimensional HSQC experiment for high magnetic field NMR spectrometers

The finite RF power available on carbon channel in proton–carbon correlation experiments leads to non-uniform cross peak intensity response across carbon chemical shift range. Several classes of broadband pulses are available that alleviate this problem. Adiabatic pulses provide an excellent magnetization inversion over a large bandwidth, and very recently, novel phase-modulated pulses have been proposed that perform 90° and 180° magnetization rotations with good offset tolerance. Here, we present a study how these broadband pulses (adiabatic and phase-modulated) can improve quantitative application of the heteronuclear single quantum coherence (HSQC) experiment on high magnetic field strength NMR spectrometers. Theoretical and experimental examinations of the quantitative, offset-compensated, CPMG-adjusted HSQC (Q-OCCAHSQC) experiment are presented. The proposed experiment offers a formidable improvement to the offset performance; ¹³C offset-dependent standard deviation of the peak intensity was below 6% in range of ±20 kHz. This covers the carbon chemical shift range of 150 ppm, which contains the protonated carbons excluding the aldehydes, for 22.3 T NMR magnets. A demonstration of the quantitative analysis of a fasting blood plasma sample obtained from a healthy volunteer is given.     

Conceptual design of a novel insertion device using bulk superconducting magnet

An undulator or a wiggler with a strong magnetic field will play an important role in future synchrotron light sources, free electron lasers, and linear colliders. We proposed the bulk high critical temperature superconductor staggered array undulator (Bulk HTSC SAU) in order to generate a strong periodic field. The Bulk HTSC SAU consists of stacked bulk high-Tc superconductors (HTSs) and a solenoid magnet which is used to magnetize the bulk HTSs. A periodic magnetic field was produced and controlled using a prototype of the Bulk HTSC SAU using 11 pairs of REBaCuO bulk HTSs at 77 K. The expected performance at low temperatures around 20 K is calculated using a loop current model.     

Heat capacity anomalies in Fe8 single crystal

A preliminary heat capacity study of Fe₈ molecules as a function of applied magnetic field, temperature and measuring frequency is presented. The heat capacity versus temperature curve shows in zero field several peaks between 2 and 3 K. The anomalies shift to a lower temperature when a magnetic field is applied. With increasing field the peaks are smeared. No frequency dependence could be established in the measured range of ω =217–4440 Hz. We have also performed heat capacity measurements as a function of magnetic field at fixed temperature. Between 2 and 3 K a pattern of well developed peaks at discrete magnetic field values is observed. The pattern strongly changes in the small temperature range between 2.3 and 2.5 K.     

Improvement of microstructure and mechanical properties of large single domain GdBaCuO superconductor with low void density

We fabricated large single domain of GdBaCuO (Gd-123) densified superconductor with a seeding and temperature gradient method in oxygen at the melt stage then in air at the growth stage for future applications such as a superconducting flywheel for energy storage system, magnetic separation, motor, current lead, and a bulk magnet. The innovative melt-textured single domain of Gd-123 system superconductor with low void density was about 46 mm in diameter and 15 mm in thickness. Gd-123 densified superconductors are expected to have high J_c and trapped magnetic field properties with higher mechanical strength. In this paper, we discuss processing, superconducting and mechanical properties of the densified Gd-123 bulk for improving the microstructure and strength of the RE-123 bulk. The relation between the microstructure and the flexural strength of the Gd-123 bulk was clearly shown.     

Large magnetocaloric effect in HoFeO3 single crystal

Magnetocaloric properties of HoFeO₃ single crystal are investigated along the direction [100]. Magnetic field dependent magnetization isotherms at different temperatures undergo a metamagnetic transition, entropy change as large as 19.2 J/kg K and 15.8 J/kg K are obtained at 7 T in the vicinity of antiferromagnetic ordering temperature of Ho³⁺ and the metamagnetic transition, respectively. The coupling of Ho and Fe spins generates the compensation behavior at 6.5 K, separating the two large magnetic entropy change. Its refrigeration capacity (RC) value, as high as 220 J/kg, is appreciable and can be considered as a promising magnetic refrigerant. New evidence for spin reorientation of Fe³⁺ in HoFeO₃ is also provided by the change of magnetic entropy.     

On some consequences of an external magnetic field applied to HTS coils

A computational model which enables to evaluate the distribution of the critical currents, electric fields and the voltage in the winding of a solenoidal high temperature superconducting (HTS) magnets subjected to an external magnetic field parallel with the magnet axis, was developed. The model comes out from the well-known power law between the electric field and the transport current of the HTS tape short sample. It allows to predict the voltage–current V(I) characteristics of both the pancake coils and the complete magnet. The model was applied to the magnet system consisting of 22 pancake coils made of multifilamentary Bi(2223)/Ag tape at 20 K, which is subjected to an external uniform magnetic field parallel with the coil axis. A rather unexpected behavior of the magnet at different operating conditions (operating current and external magnetic field strength) is predicted, analyzed and reported together with a theoretical explanation. On one hand, the external uniform magnetic field parallel with the coil axis increases the resulting magnetic field strength, however, on the other hand it simultaneously decreases the angle between the resulting magnetic field and the tape surface. Thus, the effect of higher magnetic loading caused by the presence of an external magnetic field strength which is acting on individual turns located close to the coil’s flanges is compensated by more favorable orientation of the tape with respect to the resulting magnetic field. As a result, increase in the critical currents of these turns is expected. Further, the results indicate, that in case of the high field HTS insert coils the anisotropy in the I_c(B) characteristic does not play a substantial role. As a consequence, the technology of the production of the tapes for high field insert HTS coils should concentrate rather on the tapes having the current carrying capacity as high as possible, than on the attempt how to decrease the anisotropy in the I_c(B) by changing the architecture of the filaments in the tape.     

Developments in the processing and properties of NdFeb-type permanent magnets

The composition, microstructure and processing of NdFeB-type permanent magnets are all critical factors for the successful production of high performance magnet components. Three common fabrication routes can be used to categorize these NdFeB-based bulk magnets: sintering, polymer bonding and hot deformation. Generally, the former type of magnet has a high-energy product (30–50 MGOe), full density and a relatively simple shape. Bonded magnets have intermediate energy products (10–18 MGOe), lower density and can be formed into intricate net-shapes. Hot deformed magnets possess full density, intermediate to high-energy products (15–46 MGOe), isotropic or anisotropic properties and have the potential to be formed into net shapes. This article discusses the critical issues of improved magnetic performance, environmental stability, net-shape formability and magnetization behavior for the main categories of NdFeB magnets.     

Step feature observed in the angular dependence of magnetization switching fields in GaMnAs micro-device

The magnetization switching phenomena of GaMnAs Hall devices have been investigated by using the planar Hall effect (PHE) measurement. Though two different sizes of Hall bar devices, width of 300 and of 10 μm, show very similar Curie temperature, their magnetization switching fields behave significantly different. While the angle dependence of magnetization switching field of the 300 μm device showed typical rectangular shape behavior with an applied magnetic field angle in the polar plot, that of the 10 μm device exhibited large step at 〈1 1 0〉 crystallographic directions, breaking the continuity of the switching field in angle dependence. Such unusual phenomenon observed in the 10 μm device was discussed in terms of the change in magnetic anisotropy by the fabrication of micro-device.     

A comparative study of the magnetocaloric effect in Gd3Co and Gd3Ni

Magnetic and magnetocaloric properties of polycrystalline samples of Gd₃Co and Gd₃Ni have been studied. Both these compounds are antiferromagnets and undergo metamagnetic transitions in the antiferromagnetic phase. The Neel temperatures are found to be 128 and 99 K, respectively for Gd₃Co and Gd₃Ni. Though both these compounds have the same crystal structure, their magnetic structures seem to be different. It is found that Gd₃Ni possesses larger magnetic anisotropy compared to Gd₃Co. The maximum values of isothermal magnetic entropy change are 11 and 18.5 J Kg⁻¹ K⁻¹ for Gd₃Co and Gd₃Ni respectively, while their refrigerant capacities are 2.6 J cm⁻³ for both of them. Magnetic entropy change in the paramagnetic region shows a quadratic dependence on the magnetic field in the case of Gd₃Ni, indicating the presence of spin fluctuations above the Neel temperature.     

Anisotropic vortex pinning in the β-pyrochlore oxide superconductor KOs2O6

Vortex pinning in the β-pyrochlore oxide superconductor KOs₂O₆ with T_c = 9.6 K is investigated by measuring magnetic torque. A large anisotropy of magnetic torque is observed in the superconducting state below T_p = 7.6 K, where a first-order structural transition takes place, in spite of the inherent isotropic nature of the structural and electronic properties. Magnetic torque is enhanced at external magnetic fields parallel to the [1 1 1] and [0 0 1] directions. Moreover, a pronounced peak effect is also observed in the magnetic field dependence of the torque in these two directions. We consider that the observed anisotropy is related to a microstructure associated with the structural transition.     

Magnetophotoluminescence study of GaAs/AlGaAs coupled double quantum wells with bimodal heterointerface roughness

This work reports on the results of magnetophotoluminescence (MPL) measurements carried out in a sample containing two Al_0.35Ga_0.65As/GaAs, coupled double quantum wells (CDQWs), with inter-well barriers of different thicknesses, which have the heterointerfaces characterized by a distribution of bimodal roughness. The MPL measurements were performed at 4 K, with magnetic fields applied parallel to the growth direction, and varying from 0 to 12 T. The diamagnetic shift of the photoluminescence (PL) peaks is more sensitive to changes in the confinement potential, due to monolayer variations in the mini-well thickness, rather than to the exciton localization at the local potential fluctuations. As the magnetic field increases, the relative intensities of the two peaks in each PL band inverts, what is attributed to the reduction in the radiative lifetime of the delocalized excitons, which results in the radiative recombination, before the excitonic migration between the higher and lower energy regions in each CDQW occurs. The dependence of the full width at half maximum (FWHM) on magnetic field shows different behaviors for each PL peak, which are attributed to the different levels and correlation lengths of the potential fluctuations present in the regions associated with each recombination channel.     

Production of thick high-performance sintered neodymium magnets by grain boundary diffusion treatment with dysprosium–nickel–aluminum alloy

A novel grain boundary diffusion (GBD) treatment with a Dy–Ni–Al eutectic alloy powder allowed Dy to penetrate into sintered plates of Nd–Fe–B magnet as thick as 5 mm. The coercivity of the magnet was increased from a value of 1160 kA/m (14.5 kOe) to 1760 kA/m (22 kOe). This was achieved without any marked decrease in remanance and with a high squareness.     

Fluctuation induced magneto-conductivity studies in YBa2Cu3O7−δ + xBaZrO3 composite high-Tc superconductors

Fluctuations on the electrical conductivity of polycrystalline YBa₂Cu₃O_7?δ + xBaZrO₃ (x = 1.0, 2.5, 5.0 and 10.0 wt.%) superconductors were investigated from the resistivity vs. temperature data for zero field and 8 T (Tesla) external magnetic fields. Attempts have been made to identify the optimum inclusion of BaZrO₃ (BZO) in YBa₂Cu₃O_7?δ (YBCO) superconductors. The phase formation, texture and grain alignments were analyzed by XRD and SEM techniques. Then the effects of superconducting fluctuations on the electrical conductivity of granular composite superconductors were studied for zero field and 8 T external magnetic fields. Though inclusions of BZO sub-micron particles are not expected to influence superconducting order-parameter fluctuation (SCOPF) much, the transition from 2D to 3D of the order parameter in the mean-field region depends on the BZO content in the composites. It has been observed that BZO residing at the grain boundary of YBCO matrix influences the tailing region without having significant change in the mean-field critical temperature. In the present work, attention has been focused mostly in the experimental domain relatively above the T_c. It reveals that, 1 wt.% composite exhibits a better superconducting property in comparison with pure YBCO.     

A thin film magnetic field sensor of sub-pT resolution and magnetocardiogram (MCG) measurement at room temperature

We developed a very sensitive high-frequency carrier-type thin film sensor with a sub-pT resolution using a transmission line. The sensor element consists of Cu conductor with a meander pattern (20 mm in length, 0.8 mm in width, and 18 μm in thickness), a ground plane, and amorphous CoNbZr film (4 μm in thickness). The amplitude modulation technique was employed to enhance the magnetic field resolution for measurement of the high-frequency field (499 kHz), a resolution of 7.10×10^?13 T/Hz^1/2 being achieved, when we applied an AC magnetic field at 499 kHz. The phase detection technique was applied for measurement of the low frequency field (around 1 Hz). A small phase change was detected using a dual mixer time difference method. A high phase change of 130°/Oe was observed. A magnetic field resolution of 1.35×10^?12 T/Hz^1/2 was obtained when a small AC field at 1 Hz was applied. We applied the sensor for magnetocardiogram (MCG) measurement using the phase detection technique. We succeeded in measuring the MCG signal including typical QRS and T waves, and compared the MCG with a simultaneously obtained conventional electrocardiogram (ECG) signal.     

A high-Q biochemical sensor using a total internal reflection mirror-based triangular resonator with an asymmetric Mach–Zehnder interferometer

We propose and analyze a high effective Q-factor triangular ring resonator (TRR) coupled with an asymmetric Mach–Zehnder interferometer (AMZI), in which the long evanescent fields on a total internal reflection (TIR) mirror in the TRR and the field cancelation by the phase difference of each path in the AMZI are utilized. The TRR is employed in order to more effectively measure the quantities that occur during biological events because the evanescent field of the TIR mirror with its sharp incident angle is influenced by the Goos–Hänchen shift. In this paper, we report upon the AMZI-coupled TRR sensor structure with the high effective Q-factor of about 10⁵ obtained through the optimization of the AMZI path-length. The sensitivity of the resonance shift when changing the refractive index of 1 × 10^? 4 at the incidence angle of 22.92° has been identified to be as high as 0.48 × 10⁴ nm/RIU. In addition, the power sensitivity of the AMZI-coupled TRR with a 17 dB attenuation is 5.7 × 10⁵ dB/RIU.