共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
3.
利用Compton散射对自由电子激光器的研究 总被引:8,自引:1,他引:7
通过坐标变换的方法,利用康普顿散射对自由电子激光器(FEL)的自发辐射进行了研究,精确地推导了FEL的自发辐射的波长公式,其近似式就是经典散射理论推导的自发辐射波长公式;对自发辐射的辐射功率也进行了近似推导,结果与经典散射理论公式一致。 相似文献
4.
5.
6.
Colins公式将几何光学和波动光学联系在一起,能以简单的形式描述相干光在复杂光学系统中的传输,但忽略了光学系统中一些光学元件的衍射损耗。当Colins公式用于激光谐振腔的本征模式计算时,其适用程度与被忽略腔镜的有效菲涅尔数有关。本文用数值方法求解了两组谐振腔本征积分方程,一组应用Colins公司推导,另一组用菲涅尔-惠更斯衍射积分推导,结果表明:对稳定腔Colins公式基本适用;对非稳腔,当被忽略腔镜的有效菲涅尔数>1时,原则上可以用,当被忽略腔镜的有效菲涅尔数<1时不适用;对有源非稳腔基本适用。 相似文献
7.
8.
9.
10.
非水平直圆管中黏性流体层流流量公式的推导及实验验证 总被引:1,自引:0,他引:1
通过牛顿粘滞定律和修正后的伯努利方程对非水平直圆管中黏性流体作层流运动时的流量公式进行了推导。指出将泊肃叶公式中的压强视作广义压强,则文中的推导公式与泊肃叶公式完全一致。说明泊肃叶公式可以用来求解非水平直圆管中黏性流体作层流运动时的流量。本文通过实验验证了推导公式。 相似文献
11.
采用螺旋线和折叠线技术相结合的方法,设计了一种基于水介质高功率脉冲调制器。该调制器采用了两个开关,通过控制两个开关的导通时刻,可以在两个负载上得到脉冲长度相等的两个脉冲。对该种折叠型传输线的波过程进行了详细分析,给出了过渡段部分阻抗等参数对负载电压的影响;用Pspice电路软件对脉冲形成线的充电电压和二极管电压、电流进行了模拟;最后利用高压同轴电缆,对该种类型调制器进行了低压情况下的验证实验,实验结果与理论分析、模拟研究一致。此种类型的调制器具有结构紧凑、可同时输出两个脉冲的优点。 相似文献
12.
In a one-dimensional quantal solution of Schroedinger equation, the general expressions for reflection and transmission coefficients
are derived for a potential constituting n number of rectangular wells and barriers. These expressions are readily used for the estimation of eigenvalues of a smooth
potential which is simulated by a multi-step potential. The applicability of this method is demonstrated with success in potentials
with different forms including the most versatile Ginocchio potential where the widely used numerical method like Runge-Kutta
integration algorithm fails to yield the result. Accurate evaluation of eigenvalues free from numerical problem for any form
of potentials, whether analytically solvable or not, is the highlight of the present multi-step approximation method in the
theory of potential scattering.
相似文献
13.
14.
二次曲面非球面度计算方法及公式 总被引:11,自引:0,他引:11
本文用分析、对比的方法简要叙述了计算非球面度过去沿用公式存在的缺陷,特别是在工艺方面的不适用性,根据实际工艺提出了新的计算方法和公式,并进行了推导。利用这些公式既能准确表达非球面度的概念,也可直接用于指导生产加工。 相似文献
15.
16.
有限差分波束传播法 (FD BPM)是模拟光在光波导器件中行为特性的重要数值方法 ,它的模拟精度决定于它的帕德 (Pad啨)展开阶数以及计算步长 ,阶数越高或计算步长越小精度就越高 ,但是计算时间就越长。为了在比较低的阶数和适中的步长下获得较高的计算精度 ,从平方根算符出发 ,运用了一些试探性的展开方法对平方根算符进行处理 ,得到 3种 2阶广角波束传播法计算公式 ,数值计算表明这些公式比传统广角波束传播法的 2阶计算公式具有更高的精度 ,而且可以将该试探性处理方法推广到更高阶的广角波束传播法。 相似文献
17.
脉冲传输线的介质材料选择和参数设计对传输线的损耗具有至关重要的影响,根据分布参数理论和电磁场微波理论,给出环氧玻璃纤维FR-4和聚四氟乙烯F4B两种材料的损耗计算公式,在微带特性阻抗为50Ω,工作频率为10GHz时,FR-4和F4B的介质衰减系数分别为0.095 dB/cm和0.0023dB/cm;当微带厚度为18μm,介质材料厚度为0.25mm时,FR-4和F4B的导体衰减系数分别为0.0499dB/cm和0.0357dB/cm。数值计算和仿真结果表明,F4B材料传输线的介质损耗和导体损耗相对较低,是一种较好的介质材料,选择合适的介质材料厚度可保证损耗较低且电路体积不至于过大。 相似文献
18.
Naichang Yuan Chengli Ruan Weigan Lin 《International Journal of Infrared and Millimeter Waves》1992,13(10):1633-1639
The expressions of the characteristic impedance of a new kinds of transmission lines—elliptic cone coaxial line are derived. The formulas are based on the TEM and the transformation of the sphero-conal coordinate into two dimension plane. Also themethods using the graphical approximation and taking the geometrical average of the upper and lower bounds to the size of the line are put forward to calculate the characteristic impedance — of the elliptic cone coaxial line. 相似文献
19.
Hamed Dehdashti Jahromi Mohammad Hossein Sheikhi Mohammad Hasan Yousefi 《Optics & Laser Technology》2012,44(3):572-577
Quantum dot infrared photodetectors (QDIPs) have many advantages over other types of semiconductor-based photodetectors. However some of its characteristics have been investigated theoretically, there are many unstudied points. In this paper a new approach is presented to evaluate quantum dot infrared photodetectors dark current and photocurrent. In this study, it is assumed that both thermionic emission and field-assisted tunneling mechanisms determine the dark current of quantum dot detectors. Based on these assumptions, new formula for average number of electron in a quantum dot for both, dark and illumination condition is calculated, which is more accurate than the previous reported formulas; because in deriving previous reported formulas, it was assumed only thermionic emission determines dark current but field-assisted tunneling mechanisms has not been considered. Then numerical method is used to calculate the average number of electron in a quantum dot and to determine dark current and photocurrent. The theoretical results are compared with experimental data. They have good agreement with available experimental data. 相似文献