Sb2O3的丰度对（1-x）La0.6Dy0.1Sr0.3MnO3/（x/2）（Sb2O3）电输运性质的影响

用固相反应法制备(1-x)La0.6Dy0.1Sr0.3MnO3/x/2(Sb2O3)(x=0.00,0.02,0.15)样品,通过X射线衍射(XRD)图谱,扫描电子显微镜(SEM)照片及SEM能谱(EDS),ρ～T曲线研究样品的结构及电输运性质.结果表明:Sb离子没有进入Mn位,Sb2O3包覆在La0.6Dy0.1Sr0.3MnO3颗粒表面,Sb2O3起助熔剂作用,使得复合样品的颗粒变大且大小相对均匀;复合样品的绝缘体-金属转变温度TP较纯的La0.6Dy0.1Sr0.3MnO3的TP提高20K左右,对x=0.15的样品电阻高峰值比纯的La0.6Dy0.1Sr0.3MnO3的峰值电阻率增大两个数量级,用自旋极化隧穿理论予以解释.     

Sonochemical preparation of SbSI gel

A novel sonochemical method for direct preparation of nanocrystalline antimony sulfoiodide (SbSI) has been established. The SbSI gel was synthesized using elemental Sb, S and I in the presence of ethanol under ultrasonic irradiation (35 kHz, 2 W/cm²) at 50 °C for 2 h. The products were characterized by using techniques such as powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and optical diffuse reflection spectroscopy (DRS). The SEM and HRTEM investigations exhibit that the as-prepared samples are made up of large quantity nanowires with diameters of about 10–50 nm and lengths reaching up to several micrometers and single-crystalline in nature.     

Temperature controlled synthesis of SrCO3 nanorods via a facile solid-state decomposition rout starting from a novel inorganic precursor

Strontium carbonate nanorods have been successfully synthesized via solid-state decomposition of a new precursor, [Sr(Pht)(H₂O)₂]. The obtained nanorods were found to be orthorhombic with the length of 70-100 nm and the diameter of about 10-15 nm. The Effect of calcinations temperature on morphology and purity of the products has been investigated. Strontium carbonate nanorods were formed at 500 °C. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. In addition, further evidence for the purity and stoichiometry of the product was obtained by XPS (X-ray photoelectron spectroscopy) spectrum.     

磁性纳米级Fe3O4的氧气诱导、空气氧化液相合成与表征

氧气诱导、空气氧化液相合成出了粒径为20nm左右的磁性粉体Fe3O4。由X-ray衍射，红外光谱(IR)、透射电镜(TEM)及磁滞回线方法表征了粒子的结构组成。     

Preparation of PtSnSb/C by an alcohol reduction process for direct ethanol fuel cell (DEFC)

PtSn/C and PtSnSb/C electrocatalysts (20 wt.% metal loading) were prepared by an alcohol reduction process using H₂PtCl₆.6H₂O, SnCl₂.2H₂O, and Sb(OOCCH3) as metal sources, ethylene glycol as solvent and reducing agent, and Vulcan XC72 as carbon support. The electrocatalysts were characterized by energy dispersive X-ray analysis, X-ray diffraction, and transmission electron microscopy, while that the performance for ethanol oxidation was investigated by cyclic voltammetry and chronoamperommetry (chrono) at room temperature. The diffractograms of the PtSn/C and PtSnSb/C electrocatalysts showed four peaks associated to Pt face-centered cubic structure and two peaks that were related to a SnO₂ phase. For PtSb/C and PtSnSb/C electrocatalysts, no Sb (antimony) peaks corresponding to a metallic antimony or antimony oxide phases were observed. Transmission electron microscopy images showed that the metal particles were homogeneously distributed over the support. The PtSnSb/C (50:45:05) electrocatalyst showed an increase of performance for ethanol oxidation in relation to PtSn/C electrocatalyst at room temperature. In the tests at 100 °C on a single cell of a direct ethanol fuel cell, the maximum power density of PtSnSb/C (50:45:05) electrocatalyst was slightly higher than that of PtSn/C electrocatalyst.     

Epitaxial growth of high quality β-FeSi2 layers on Si(1 1 1) under the presence of an Sb flux

β-FeSi₂ layers were grown on Si(1 1 1) substrates by Fe deposition and simultaneous reaction with Si under the presence of an Sb flux. High quality epitaxial layers were obtained at the substrate temperature of 650°C with smooth interface between the reactive resultant β-FeSi₂ layers and Si substrates, in comparison to the layers grown by conventional reactive deposition epitaxy (RDE). Sb/Fe flux ratio dependence of the structural property was examined using X-ray diffraction (XRD) measurements, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Photoluminescence spectra were also measured at low temperature.     

表面修饰碳纳米管/二氧化钛复合光催化剂制备及催化活性研究

采用溶胶-凝胶法在聚乙烯吡咯烷酮(PVP)修饰的碳纳米管表面均匀沉积纳米级二氧化钛粒子制得复合光催化剂。采用透射电子显微镜(TEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱仪(UV-Vis)和X射线光电子能谱仪(XPS)等手段对复合光催化剂进行表征。结果表明,二氧化钛粒子是呈球形、团聚,随机沉积在未修饰碳纳米管任意表面,甚至部分碳纳米管表面是完全裸露的。经PVP修饰后的碳纳米管,二氧化钛纳米粒子均匀沉积在碳纳米管表面,二氧化钛为纯锐钛矿晶体结构,没有金红石和板钛矿相。表面修饰碳纳米管/二氧化钛复合光催化剂在紫外光照射下降解亚甲基蓝,相比纯的二氧化钛和碳纳米管/二氧化钛复合光催化剂,具有非常高的催化活性。     

Canted antiferromagnetic and optical properties of nanostructures of Mn2O3 prepared by hydrothermal synthesis

We have reported new magnetic and optical properties of Mn2O3 nanostructures.The nanostructures have been synthesized by the hydrothermal method combined with the adjustment of pH values in the reaction system.The particular characteristics of the nanostructures have been analyzed by employing X-Ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray(EDX) analysis,transmission electron microscopy(TEM),high resolution transmission electron microscopy(HRTEM),Raman spectroscopy(RS),UV-visible spectroscopy,and the vibrating sample magnetometer(VSM).Structural investigation manifests that the synthesized Mn2O3 nanostructures are orthorhombic crystal.Magnetic investigation indicates that the Mn2O3 nanostructures are antiferromagnetic and the antiferromagnetic transition temperature is at TN=83 K.Furthermore,the Mn2O3 nanostructures possess canted antiferromagnetic order below the Neel temperature due to spin frustration,resulting in hysteresis with large coercivity(1580 Oe) and remnant magnetization(1.52 emu/g).The UV-visible spectrophotometry was used to determine the transmittance behaviour of Mn2O3 nanostructures.A direct optical band gap of 1.2 eV was acquired by using the Davis-Mott model.The UV-visible spectrum indicates that the absorption is prominent in the visible region,and transparency is more than 80% in the UV region.     

Electron channeling X-ray microanalysis for partially filled skutterudite structure

Occupancy of Ce atoms on voids and coordinates of Sb atoms in a partially filled skutterudite CeFe6Ni2Sb24 were determined by the method for atomic location by channeling enhanced microanalysis (ALCHEMI), where characteristic X-ray intensities were measured and calculated at various electron incidence directions in a transmission electron microscope. The calculation was based on dynamical electron diffraction and inelastic scattering theories. The calculated intensities were significantly dependent on the occupation probability of Ce atoms on voids, the coordinates of Sb atoms and the sample thickness. Using the Levenberg-Marquardt least squares method, the occupation probability of Ce atoms and the coordinates of Sb atoms were 0.33 and 0 0.336 0.147, respectively.     

In-situ fabrication of ZnO nanoparticles sensors based on gas-sensing electrode for ppb-level H_2S detection at room temperature

The zinc oxide(ZnO)nanoparticles(NPs)sensors were prepared in-situ on the gas-sensing electrodes by a one-step simple sol-gel method for the detection of hydrogen sulfide(H₂S)gas.The sphere-like ZnO NPs were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),x-ray diffraction(XRD),energy dispersive x-ray analysis(EDX),and their H₂S sensing performance were measured at room temperature.Testing results indicate that the ZnO NPs exhibit excellent response to H₂S gas at room temperature.The response value of the optimal sample to750 ppb H₂S is 73.3%,the detection limit reaches to 30 ppb,and the response value is 7.5%.Furthermore,the effects of the calcining time and thickness of the film on the gas-sensing performance were investigated.Both calcining time and film thickness show a negative correlation with the H₂S sensing performance.The corresponding reaction mechanism of H₂S detection was also discussed.