Free Field Reciprocity Calibration in a Convergent Spherical Acoustic Wave of a Focusing Transducer

Based on the reciprocity theorem of the acoustic field,we derive the formula of the reciprocity coefficient of a convergent spherical acoustic wave and we calculate a series of diffraction corrective factor curves of the reciprocity coefficient of transducers.Using these formulae and corrective factors,we calibrate the free field transmitting current response and the free field voltage sensitivity of a focusing transducer using the self-reciprocity method.The experimental results of the reciprocity calibration of the focusing transducer in the frequency range of 2MHz to 5.4MHz are presented.     

Research on modal analysis of structural acoustic radiation using structural vibration modes and acoustic radiation modes

Modal analysis of structural acoustic radiation from a vibrating structure is discussed using structural vibration modes and acoustic radiation modes based on the quadratic form of acoustic power. The finite element method is employed for discretisizing the structure. The boundary element method and Rayleigh integral are used for modeling the acoustic fluid. It is shown that the power radiated by a single vibration mode is to increase the radiated power and the effect of modal interaction can lead to an increase or a decrease or no change in the radiated power, moreover, control of vibration modes is a good way to reduce both vibration and radiated sound as long as the influence of interaction of vibration modes on sound radiation is insignificant. Stiffeners may change mode shapes of a plate and thus change radiation efficiency of the plate‘s modes. The CHIEF method is adopted to obtain an acoustic radiation mode formulation without the nonuniqueness difficulty at critical frequencies for three-dimensional structures by using Moore-Penrose inverse. A pulsating cube is involved to verify the formulation. Good agreement is obtained between the numerical and analytical solutions. The shapes and radiation efficiencies of acoustic radiation modes of the cube are discussed. The structural acoustic control using structural vibration modes and acoustic radiation modes are compared and studied.     

Theoretical and Experimental Investigation of Ultrasonic Focusing with Annular Phased Array

The focused acoustic field generated by an annular array interface are investigated theoretically and experimentally. transducer and its reflection field on a solid-liquid Theoretically, the concise analytic expressions about the radiation and reflection acoustic fields of the annular phased array are obtained by the ray approach method （saddle-point method）. In experiment, an annular transducer with 8 equal-area elements is designed and fabricated, and a series of experiments about the radiation acoustic field and its reflection on the liquid-solid interface are carried out. The experimental characteristics of the transducer are in good agreement with the numerical ones. It shows the correctness of the theoretical result and the feasibility of dynamic focusing of the experiment system. With the maximum amplitude and its emergence time of the reflection wave, we can acquire the information and the imaging of the reflection interface by the annular phased array dynamic focusing.     

Advantage analysis of PMN-PT material for free-flooded ring transducers

The acoustic radiation characteristics of free-flooded ring transducers made of PZT4 and PMN-PT materials are calculated and compared.First,the theoretical formulae for free-flooded ring transducers are studied.The resonant frequencies of a transducer made of PZT4 and PMN-PT materials are calculated.Then,the transmitting voltage responses of the free-flooded ring transducers are calculated using the finite element method.Finally,the acoustic radiation characteristics of the free-flooded ring transducers are calculated using the boundary element method.The calculated results show that the resonant frequencies of the free-flooded ring transducer made of PMN-PT are greatly reduced compared with those made of PZT4 with the same size.The transmitting voltage response of the transducer made of PMN-PT is much higher than that of the transducer made of PZT4.The calculated 3-dB beamwidth of the acoustic radiated far-field directivity of the free-flooded ring transducer made of PZT4 at the resonant frequency 1900 Hz is 63.6 and that of the transducer made of PMN-PT at the resonant frequency 1000 Hz is 64.6.The comparison results show that the free-flooded ring transducer made of PMN-PT material has many advantages over that made of PZT4.The PMN-PT is a promising material for improving the performance of free-flooded ring transducers.     

Simulation of the acoustic field emitted from medical linear transducer in a heterogeneous tissue

A numerical model is developed to simulate the acoustic field in heterogeneous tissue from a medical linear transducer.The coupled full-wave equation for nonlinear ultrasound is solved using a staggered-grid finite difference time domain method.The distribution of acoustic pressure and power in human abdominal wall with heterogeneities in sound speed,density,and nonlinear parameter are obtained.Compared with homogeneous medium,when sound speed in tissue is uniform and density unchanged,the acoustic energy decreases only1.8 dB in the focal region;when density in tissue is uniform and sound speed unchanged,the energy decreases 3.8 dB in the focal region,which is almost the same as heterogeneous tissue.Thus,the primary factor of the aberration of focused beam is the heterogeneous distribution of the tissue sound speed.     

Directivity calculation with experimental verification for a conformal array of underwater acoustic transducers

The radiation directivity of a complicated conformal array of underwater acoustic transducers is presented based on the boundary ＂element method. It includes the element directivity of each transducer, the natural beam pattern and the controlled beam pattern of the transducer array. At first, the boundary element model of the conformal array is built up, and then the boundary condition is exerted on the model according to the design and environment in which the transducer array is used, and the radiation directivity of the conformal array is calculated. An experiment has been done to measure the directivity in an anechoic water tank. The calculated and the experimental results are compared and analyzed. They are consistent to each other. It is shown that the boundary element method together with the detailed calculations is successful to simulate and predict the radiation directivity of an underwater acoustic transducer array.     

MEASUREMENT OF MECHANICAL INPUT IMPEDANCE OF PLANE ARRAY ELEMENT USING IMPULSE SOUND TUBE

In this paper,a method of measuring the mechanical input impedance of the array element(longitudinal vibrating transducer)with square radiation head by using impulse sound tube is proposed.Theresonant frequencies determined from the measured mechanical input impedance are quite in agreementwith those obtained from the electrical admittance cycle diagram of the element.This indirectly shows thatthe proposed method is feasible.     

Optimization of the Monopole Acoustic Transducer for Logging-while-Drilling

A new design idea for a monopole acoustic transducer which increases the frequency band and improves electromechanical performance is proposed with a focus on the lowest order of the radial and flexural modes. Numerical modeling of the resonance frequencies and electrical conductance are conducted with respect to the dimensions and material parameters of the proposed transducer. The transmitting voltage response level with respect to the density and velocity of the fluid media is calculated. The numerical simulation is validated through experiments. The frequency band and the electromechanical performance of the monopole acoustic transducer can be optimized by the g~ven methods concluded from the numerical results.     

Focusing of Time Reversal Lamb Waves and Its Applications in Structural Health Monitoring

The focusing of time reversal acoustic fields for dispersive and multimodal Lamb waves is theoretically investigated and experimentally verified. It is demonstrated that the time reversal Lamb wave signal will reach the maximum amplitude when the observation point is located at the damage location. Based on the time reversal focusing theory, a damage imaging method is proposed for structural health monitoring using Lamb waves. The experiments employ a transducer network consisting of four piezoelectric transducers as actuators and as well sensors for excitation and measurement of Lamb waves. The results show that this method is able to accurately predict damage location and provides an estimation of the possible area even for damage close to one of the transducers or even slightly outside the transducer network.     

A wideband combined transducer for measuring system in sound tube

A wideband transducer for sound tube system is presented,which combines longitudinal transducer and ClassⅣflextensional transducer to improve the performance at low frequency and broaden the working band.The equivalent circuit is obtained and used to analyze the coupling mechanism between longitudinal transducer and flextensional transducer.A prototype of the transducer is developed after optimizing the electro-acoustic performances by Finite Element Method.The standing wave in the sound tube stimulated by this transducer has been studied and the sound absorbing coefficients of two acoustic materials samples are measured using this sound tube,which shows that the transducer can meet the requirements of acoustic material measurement with the working band ranging from 1.4 kHz to 23 kHz.