Optical and electrical properties of swift heavy ion beam-irradiated polycarbonate/polystyrene bilayer films

Polycarbonate/polystyrene bilayer films prepared by solvent-casting method were irradiated with 55 MeV carbon ion beam at different fluences ranging from 1×10¹¹ to 1×10¹³ ions cm^?2. The structural, optical, surface morphology and dielectric properties of these films were investigated by X-ray diffraction (XRD), UV–visible spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, optical microscopy and dielectric measurements. The XRD pattern shows that the percentage of crystallinity decreases while inter-chain separations increase with ion fluence. UV–visible spectroscopy shows that the energy band gap decreases and the number of carbon atoms in nanoclusters increase with the increase in ion fluences. The refractive index is also found to decrease with the increase in the ion fluence. Optical microscopy shows that after irradiation polymeric bilayer films color changes with ion fluences. The FTIR spectra evidenced a very small change in cross-linking and chain scissoring at high fluence. Dielectric constant decreases while dielectric loss and AC conductivity increase with ion fluences.     

Modifications induced by gamma irradiation upon structural,optical and chemical properties of polyamide nylon-6,6 polymer

The effects of gamma rays were studied on the optical, structural and chemical properties of the PA-66 polymer samples. The polymer samples obtained from Goodfellow (Cambridge, UK) were irradiated with gamma rays at various doses ranging from 100 to 1250 kGy. The pristine and gamma rays irradiated samples were characterized by UV–visible (UV–VIS) spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. UV–VIS shows a shift in absorption toward the visible region for irradiated samples and a decrease in band gap energy (E_g). The XRD analyses show an increase in the crystalline nature of the polymer at higher doses as a result of significant decrease in the peak width of XRD patterns. The FTIR spectra show decrease in intensity and shift of various bands with increase in gamma dose.     

Electron-beam irradiation effects on poly(ethylene-co-vinyl acetate) polymer

Poly(ethylene-co-vinyl acetate) (EVA) films were irradiated with a 1.2 MeV electron beam at varied doses over the range 0–270 kGy in order to investigate the modifications induced in its optical, electrical and thermal properties. It was observed that optical band gap and activation energy of EVA films decreased upon electron irradiation, whereas the transition dipole moment, oscillator strength and number of carbon atoms per cluster were found to increase upon irradiation. Further, the dielectric constant, the dielectric loss, and the ac conductivity of EVA films were found to increase with an increase in the dose of electron radiation. The result further showed that the thermal stability of EVA film samples increased upon electron irradiation.     

Optical and Structural Modifications in Heavy Ion Irradiated Polystyrene

Samples of polystyrene (PS) have been irradiated with ⁶⁴Cu (50 and 120 MeV) and ¹²C (70 MeV) ion beams (fluence=10¹¹ to 10¹³ ions cm^?2) in order to study the induced modifications using UV‐VIS and FTIR spectroscopy. UV spectra of irradiated samples reveal that the optical band gap decreases from 4.36 to 1.46 eV in PS. The decrease in optical band gap is more pronounced with the Cu‐ion beam due to high electronic energy loss as compared to the C ion beam. The effect of low energy (50 MeV) Cu ions on the optical properties of PS is larger than that due to high energy (120 MeV) Cu ions. The correlation between the optical band gap and the number of six member carbon rings inside the largest carbon clusters embedded in the network of polystyrene is discussed. FTIR spectra reveal the formation of hydroxyl, alkene, and alkyne groups in the Cu‐ion irradiated PS. Changes in the intensity of the absorption bands on irradiation with C‐ion relative to pristine samples have also been observed and are discussed.     

Carbon (70 MeV) and copper (120 MeV) ions irradiation effects in Makrofol-N

Makrofol-N polycarbonate was irradiated with carbon (70 MeV) and copper (120 MeV) ions to analyze the induced effects with respect to optical and structural properties. In the present investigation, the fluence for carbon and copper beams was kept in the range of 1×10¹¹– 1×10¹³ ions/cm² to study the swift heavy ion induced modifications. UV–VIS, FTIR and XRD techniques were utilized to study the induced changes. The analysis of UV–VIS absorption studies revealed that the optical energy gap was reduced by 17% on carbon irradiation, whereas the copper beam leads to a decrease of 52% at the highest fluence of 1×10¹³ ions/cm². The band gap can be correlated to the number of carbon atoms, N, in a cluster with a modified Robertson's equation. In copper (120 MeV) ions irradiated polycarbonate, the number of carbon atoms in a cluster was increased from 63 to 269 with the increase of ion fluence from 0 to 1×10¹³ ions/cm², whereas N is raised only up to 91 when the same polymer films were irradiated with carbon (70 MeV) ions under similar conditions. FTIR analysis showed a decrease in almost all characteristic absorption bands under irradiation. The formation of hydroxyl (? OH) and alkene (C?C) groups were observed in Makrofol-N at higher fluence on irradiation with both types of ions, while the formation alkyne end (R? C≡ CH) group was observed only after copper ions irradiation. The radii of the alkyne production of about 3.3 nm were deduced for copper (120 MeV) ions. XRD measurements show a decrease in intensity of the main peak and an increase of the average intermolecular spacing with the increase of ion fluence, which may be attributed to the structural degradation of Makrofol-N on swift ion irradiation.     

Modification of Lexan polycarbonate induced by electron irradiation

An 8 MeV electron-induced modification of Lexan polycarbonate (Lexan) films has been studied systematically using UV–visible spectroscopy, LCR meter, X-ray diffractogram (XRD) and differential scanning calorimetry (DSC) techniques. The optical properties of the Lexan films showed a decrease in the optical energy gap with an increase in the electron dose. The AC conductivity and dielectric constant were found to change significantly due to irradiation, and the dielectric constant was found to obey the universal law of dielectric constant. The XRD results show that the crystallite size and the percentage of crystallinity of films decrease after irradiation. The decrease in glass transition temperature shown by DSC studies reveals that the polymeric system has changed towards a more disordered state.     

Effect of gamma irradiation on the structural and optical properties of PVA/CdS nanocomposite films prepared by ex-situ technique

ABSTRACT

For a comprehensive understanding of the PVA/CdS nanocomposite properties, it is essential to select the suitable method for their preparation as well as elucidate the interfacial interactions, which still need support. CdS nanoparticles have been prepared by thermolysis method under the flow of nitrogen. Rietveld refinement of x-ray data shows that all the CdS samples have both cubic and hexagonal structures. Then PVA/CdS films were prepared by ex-situ technique. Samples from PVA/CdS nanocomposite have been irradiated with gamma doses in the range 10–120?kGy. The implanting of CdS NPs into PVA matrix was confirmed by XRD hand in hand with UV–vis and FTIR spectroscopic techniques. UV/VIS absorption spectra confirm the formation of hybridized film CdS/PVA nanocomposite with a refractive index in the range of 1.32–1.48 (at 500?nm). UV/VIS measurements were also used in calculating different optical parameters such as refractive index, extinction coefficient and optical band gap energy. Additionally, Tauc’s relation was used to determine the type of electronic transition. It is found that the gamma irradiation in the dose range 30-90?kGy led to a more compact structure of PVA/CdS nanocomposite and causes proper dispersion of CdS nanoparticles in the PVA matrix. This led to the formation of coordination reaction between OH of PVA and CdS nanoparticles, resulted in an increase in refractive index and the amorphous phase. Also, the gamma irradiation reduces the optical energy gap from 4.53 to 2.19?eV, and accompanied with an increase in the Urbach energy from 2.28 to 4.46?eV, at that dose range which could be attributed to the increase in structural disorder of the irradiated PVA/CdS nanocomposites due to crosslinking. Further, the color intensity ΔE, which is the color difference between the non-irradiated sample and the irradiated ones, was increased, from 0 to 10.8, with increasing the gamma dose, convoyed by an increase in the red and yellow color components.     

Design and performance of Yb/ZnS/C Schottky barriers

In this work, ZnS thin films are deposited onto glass and transparent ytterbium substrates under vacuum pressure of 10^?5 mbar. The effects of the Yb substrate on the structural, mechanical, optical, dielectric and electrical performance of the ZnS are explored by means of the energy dispersion X-ray analyzer, X-ray diffraction, UV–VIS spectroscopy, current-voltage characteristics and impedance spectroscopy techniques. The techniques allowed determining the lattice parameters, the grain size, the degree of orientation, the microstrain, the dislocation density, the optical and the excitonic gaps, the energy band offsets and the dielectric resonance and dispersion. The (111) oriented planes of glass/ZnS and Yb/ZnS exhibited 2.06% lattice mismatch between Yb and ZnS and degree of orientation values of 63% and 51.6%, respectively. The interfacing of the ZnS with Yb shrunk the energy band gap of ZnS by 0.50 eV. On the other hand, the electrical analysis on the Yb/ZnS/C Schottky device has revealed a rectification ratio of 3.48 × 10⁴ at a biasing voltage of 0.30 V. The barrier height and ideality factor was also determined. Moreover, the impedance spectroscopy analysis have shown that the Yb/ZnS/C device is very attractive for use as varactor devices of wide tunability. The device could also be employed as microwave resonator above 1337 MHz.     

Ion beam modification of surface properties of CR-39

The effects of ion-beam bombardment on the physical and chemical properties of poly(allyl diglycol carbonate) (CR-39) polymer have been investigated. CR-39 samples were bombarded with 320 keV Ar and 130 keV He ions at fluences ranging from 1 × 10¹³ to 2 × 10¹⁶ ions/cm². The nature and extent of radiation damage induced were studied by UV–VIS spectrometry, Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) analysis, as well as Vickers' hardness measurements. In addition, the effect of ion fluence on the wetting properties of ion-beam bombarded CR-39 polymer was determined by measuring the contact angle for distilled water. UV–VIS spectra of bombarded samples reveal that the optical band gap decreases with increasing ion fluence for both Ar and He ions. In the FTIR spectra, changes in the intensity of the bands on irradiation relative to pristine samples occurred with the appearance of new bands. XRD analyses showed that the degree of ordering of the CR-39 polymer is dependent on the ion fluence. Changes of surface layer composition and an increase in the number of carbonaceous clusters produced important change in the energy gap and the surface wettability. The surface hardness increased from 10.54 MPa for pristine samples to 28.98 and 23.35 MPa for samples bombarded with Ar and He ions at the highest fluence, respectively.     

Electron-Beam-Induced Modifications in High-Density Polyethylene

Post-irradiation studies have been carried out to elucidate the effects of electron beam irradiation on the structural, optical, dielectric, and thermal properties of high-density polyethylene (HDPE) films. The experimental results showed that both the optical band gap and activation energy of HDPE films decreases with an increase in the doses of electron radiation. The electrical measurements showed that dielectric constant and the ac conductivity of HDPE increases with an increase in the dose of electron radiation. The thermal analysis carried out using DSC and TGA revealed that the melting temperature, degree of crystallinity, and thermal stability of the HDPE films increased, obviously, due to the predominant cross-linking reaction following high doses of electron irradiation.     

Fabrication and characterization of nanocrystalline Al,Co:ZnO thin films by a sol–gel dip coating

The consequence of annealing on the micro-structural and electrochemical characteristics of Al doped CoZnO thin films deposited by sol–gel dip coating technique are studied. X-ray diffraction indicates that films have a hexagonal wurtzite structure oriented towards the (100). Optical properties of films are recorded by transmission curves utilising a UV–VIS spectrophotometer. The investigation of the optical transmission spectra indicates that the band gap of the films decrease from 3.99 eV to minimum 3.83 eV upon annealing. All films show room temperature ferromagnetism whose magnetization increases with annealing. Dip coated films possess polycrystalline nanosized grains with porous morphology.     

Effect of lithium thiocyanate addition on the structural and electrical properties of biodegradable poly(ε-caprolactone) polymer films

Polymer electrolyte films of biodegradable poly(ε-caprolactone) (PCL) doped with LiSCN salt in different weight ratios were prepared using solution cast technique. The effect of crystallinity and interaction between lithium ions and carbonyl groups of PCL on the ionic conduction of PCL:LiSCN polymer electrolytes was characterized by X-ray diffraction (XRD), optical microscopy, Fourier transform infrared spectroscopy (FTIR) and AC impedance analysis. The XRD results revealed that the crystallinity of the PCL polymer matrix decreased with an increase in LiSCN salt concentration. The complexation of the salt with the polymer and the interaction of lithium ions with carbonyl groups of PCL were confirmed by FTIR. The ionic conductivity was found to increase with increasing salt concentration until 15 wt% and then to decrease with further increasing salt concentration. In addition, the ionic conductivity of the polymer electrolyte films followed an Arrhenius relation and the activation energy for conduction decreased with increasing LiSCN concentration up to 15 wt%. UV–vis absorption spectra were used to evaluate the optical energy band gaps of the materials. The optical energy band gap shifted to lower energies with increasing LiSCN salt concentration.     

Optical and structural properties of PbI<Subscript>2</Subscript> thin film produced via chemical dipping method

PbI₂ thin films were deposited on glass substrates via chemical bath deposition. The characteristics of PbI₂ thin films were examined through their structural and optical properties. X-ray diffraction spectra showed the presence of rhombohedral structure and atom planes were subject to change with the pH of the bath. Scanning electron microscope indicated uniform distribution of grains. Optical properties were examined via UV–VIS; optical spectrum of the thin films was measured at the range of 200–1100 nm wavelength. Optimum pH levels for producing thin films were found to be pH 4–5. It has been observed that transmission and optical band gap (E _g) increased with the pH of the bath, which varied between 66–95 and 2.24–2.50 %, respectively; on the other hand film thickness of PbI₂ thin films was decreased with the pH of the bath. Energy-dispersive X-ray spectroscopy analysis were in accordance with theoretical value of PbI₂ at pH = 4 and 5. Refractive index was negatively correlated with pH of the chemical bath; it has been calculated as 1.97, 1.40, 1.29 and 1.24 for the films produced at pH 2, 3, 4 and 5. The results of the study were compared with similar studies in the literature.     

ZnSe and copper-doped ZnSe nanocrystals (NCs): Optical absorbance and precise determination of energy band gap beside their exact optical transition type and Urbach energy

The using of a reliable and accurate new method (called in literature as derivation of absorption spectrum fitting (DASF)) for evaluation of the optical band gap (E_g) and also the exact nature of charge carriers optical transitions, is investigated in ZnSe and ZnSe:Cu nanocrystals (NCs) synthesized by rapid microwave irradiation. This method can be performed by using the output of UV–Visible spectroscopy. The obtained E_g values are within the range of 2.985–3.261 eV, depending to the microwave irradiation time and Cu dopant percentage (decreasing trend with increasing of irradiation time and Cu content). The DASF-based obtained results for ZnSe and ZnSe:Cu nanoparticles, showed the more precise values of band gap, with the same trend of previously qualitative reported data on the same samples. Also, the direct gap nature of their optical transitions was justified. To perform the method, there is no any need to the concentration of solutions and merely one need the direct absorption or transmission spectra. In other word, DASF technique was employed on ZnSe NCs to confirm its validity and to avoid non-precise reports on optical band gap which can affect on the device optimizations based on these samples. Moreover, using the values of E_g, refractive index and dielectric constant of each sample were obtained at the absorption edge. Also, the width of the tailing states in the gap (Urbach energy: E_Tail) was estimated and were within the range of 0.049–0.122 eV, which their very small values in compare with E_g imply to the sharp valence and conduction band edges; it means the good crystallinity nature of the produced samples.     

Surface and Bulk Structure Characterization of Proton (3 MeV) Irradiated Polycarbonate

Polycarbonate (Makrofol‐N) thin films were irradiated with protons (3 MeV) under vacuum at room temperature with the fluence ranging from 1×10¹⁴ to 1×10¹⁵ protons cm^?2. The change in surface morphology, optical properties, degradation of the functional groups, and crystallinity of the proton‐irradiated polymers were investigated with atomic force microscopy (AFM), UV‐VIS, and Fourier‐transform infrared (FTIR) spectroscopy, and X‐ray diffraction (XRD) techniques, respectively. AFM shows that the root mean square (RMS) roughness of the irradiated polycarbonate surface increases with the increment of ion fluence. The UV‐VIS analysis revealed that in Makrofol‐N the optical band gap decreased by 30% at highest fluence of 1×10¹⁵ protons cm^?2. The band gap can be correlated to the number of carbon atoms, M, in a cluster with a modified Robertson's equation. The cluster size in the proton‐irradiated Makrofol‐N increased from 112 to 129 atoms with the increase of fluence from 1×10¹⁴ to 1×10¹⁵ protons cm^?2. FTIR spectra of proton (3 MeV) irradiated Makrofol‐N showed a strong decrease of almost all absorption bands at about 1× 10¹⁴ protons cm^?2. However, beyond a higher critical dose an increase in intensity of almost all characteristic bands was noticed. The appearance of a new peak at 3,500 cm^?1 (‐OH groups) was observed at the higher fluences in the FTIR spectra of proton‐irradiated polycarbonate. XRD measurements showed an increase of full width at half maximum (FWHM) and the average intermolecular spacing of the main peak, which may be due to the increase of chain scission and the introduction of ‐OH groups in the proton irradiated polycarbonate.     

Effect of annealing on structural and optical properties of diamond-like nanocomposite thin films

The annealing effect on structural and optical properties of the Diamond-like Nanocomposite (DLN) thin film deposited on glass substrate by Plasma Assisted Chemical Vapor Deposition (PACVD) method has been investigated. The films were annealed at temperature ranging from 300 to 600 °C, with 100 °C interval for 9 minutes by rapid thermal process (RTP) under vacuum. The structural changes of the annealed films have been studied using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, Scanning Electron Microscope (SEM), and optical parameters have been determined using transmittance and reflectance spectra in UV-UIS-NIR range. The result shows that the refractive index increases gradually from 1.79 to 2.84 with annealing temperature due to out-diffusion of H by breaking Si–H and C–H bond leads to Si–C bond, i.e. more cross linking structure. In higher temperature range, graphitization also enhanced the refractive index. However, the optical band gap at up to 400 °C initially increases from 3.05 to 3.20 eV and then decreases due to graphitization. The film has a great potential to be used as anti-reflection coating (ARC) on silicon-based solar cell.     

Effect of γ-irradiation on optical and chemical properties of CR-39 polymer

CR-39 polymer samples were irradiated with γ-irradiation up to dose ranging from 500 to 2000 kGy. The virgin and γ-irradiated polymer samples were investigated using UV–visible spectroscopy and Fourier transform infrared (FTIR) spectroscopy. In the present work, the Urbach energy was calculated using the Urbach edge method. Also, the direct and indirect energy band gaps in virgin and γ-irradiated CR-39 polymer samples were calculated. The values of indirect energy band gap were found to be lower than the corresponding values of direct energy band gap. The decrease in the optical energy band gap with increasing γ-irradiation dose was discussed on the basis of γ-irradiation-induced modifications in CR-39 polymer. The correlation between optical energy band gap and the number of carbon atoms in a cluster with modified Tauc's equation was also discussed. The FTIR spectra show considerable changes due to γ-irradiation, indicating that the detector is not chemically stable.     

Investigation of structural and optical properties of 100 MeV F7+ ion irradiated Ga10Se90-xAlx thin films

Present work focuses on the effect of swift heavy ion (SHI) irradiation of 100 MeV F⁷⁺ ions by varying the fluencies in the range of 1 × 10¹² to 1 × 10¹³ ions/cm² on the morphological, structural and optical properties of polycrystalline thin films of Ga₁₀Se_90-xAl_x (x = 0, 5). Thin films of ~300 nm thickness were deposited on cleaned Al₂O₃ substrates by thermal evaporation technique. X-ray diffraction pattern of investigated thin films shows the crystallite growth occurs in hexagonal phase structure for Ga₁₀Se₉₀ and tetragonal phase structure for Ga₁₀Se₈₅Al₅. The further structural analysis carried out by Raman spectroscopy and scanning electron microscopy verifies the defects or disorder of the investigated material increases after SHI irradiation. The optical parameters absorption coefficient (α), extinction coefficient (K), optical band gap (E_g) and Urbach’s energy (E_U) are determined from optical absorption spectra data measured from spectrophotometry in the wavelength range 200–1100 nm. It was found that the values of absorption coefficient and extinction coefficient increase while the value of optical band gap decreases with the increase in ion fluence. This post irradiation change in the optical parameters was interpreted in terms of bond distribution model.     

X-ray irradiation-induced changes in Bayfol DPF 5023 polycarbonate

Samples from sheets of the polymeric material Bayfol DPF 5023 have been exposed to X-ray radiation in the dose range 100–2300 Gy. The modifications induced in Bayfol samples due to X-ray irradiation have been studied through different characterization techniques such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, intrinsic viscosity, refractive index and color difference studies. The infrared spectroscopy indicated that crosslinking is the dominant mechanism at the dose range of 200–2300 Gy. The crosslinking reported by FTIR spectroscopy destroyed the degree of ordering in the Bayfol samples, as revealed by the XRD technique. Also, this crosslinking led to an increase in the value of intrinsic viscosity from 0.54 for the non-irradiated sample to 0.63 for the sample irradiated with 2300 Gy at 30 °C, indicating an increase in the average molecular mass. This was associated with an increase in the refractive index. Additionally, the non-irradiated Bayfol samples showed significant color sensitivity toward X-ray irradiation. This sensitivity appeared in the change of the blue color component of the non-irradiated Bayfol film to yellow after exposure to X-ray doses up to 2300 Gy. This is accompanied by a net increase in the darkness of the samples.     

Effect of gamma irradiation on hydrothermally synthesized barium titanate nanoparticles

The effect of gamma irradiation on hydrothermally synthesized BaTiO₃ nanoparticles has been investigated. Gamma irradiation was carried out at room temperature from 0, 50, 100, 150, 200?kGy to a maximum dose up to 250?kGy, source being ⁶⁰Co gamma radiations. The structure, size and chemical changes of the BaTiO₃ were studied using X-ray diffraction, Fourier-transform infrared spectrophotometry (FTIR) techniques and scanning electron microscopy (SEM). The optical band gap has been computed by UV–Visible spectroscopy data. From the results obtained, it is evident that the gamma irradiation increases the crystallinity, whereas the particle size of BaTiO₃ nanoparticles is altered. UV–Visible spectroscopy shows a noticeable change in the energy band gap due to gamma irradiation. Significant changes in anharmonicity constant computed using FTIR data due to irradiation has been observed. SEM shows the size and deviation from uniformity of particles.