共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
《声学学报》2016,(2)
方位估计和信号恢复分别是水下目标定位、跟踪和目标识别的前提。提出了一种阵列频域单快拍压缩感知的水下目标方位估计和信号恢复方法。首先将阵列接收数据变换到频域,取频域单快拍数据作为压缩感知的测量值,然后根据频域快拍对应的频率、搜索方位和阵列流形构造过完备的阵列流形矩阵作为压缩感知的感知矩阵,最后通过基追踪算法估计搜索方位上目标信号和功率,实现DOA估计与信号恢复。宽带仿真实验数据验证结果表明,同等条件下完成同样的目标方位分辨,提出的方法比最小方差无失真响应方法要求的阵元数和快拍数较少,要求的信噪比更低,恢复的目标信号更加准确,波形相关系数达到89%以上。海上实验数据处理结果表明,目标检测能力优于最小方差无失真响应方法,证明该方法可以适用于实际声呐系统。 相似文献
4.
5.
6.
7.
针对水下目标方位超分辨估计问题,提出一种功率受限(Power Constraint)的常规波束形成(Conventional BeamForming)拟合算法(PC-CBF)。PC-CBF算法通过常规波束形成获得目标方位谱数据,利用阵列响应向量对方位谱进行后处理,准确估计目标个数与目标方位。算法对接收信号的功率进行限制,获得对方位谱的欠拟合,利用凸优化进行反演卷积,估计目标的方位信息。仿真结果表明,算法性能在分辨率上优于基于半正定规划的常规波束形成算法(semi-definite programming Conventional BeamForming,sdp-CBF)和多重信号分类(MUltiple SIgnal Clasification,MUSIC)。对水池实验数据以及湖试数据处理结果显示,PC-CBF算法能够获得较窄的谱峰宽度以及较低的背景级,具有较强的方位估计分辨能力。 相似文献
8.
针对基于高斯先验模型的贝叶斯压缩感知在目标方位(Direction Of Arrival,DOA)估计中可能出现明显随机伪峰的问题,改进了高斯先验模型,并在此基础上提出了一种贝叶斯压缩感知目标方位估计方法。通过波束输出噪声背景预估与二值指示变量标记,并引入基于信号先验方差的噪声方差估计方法,与变分贝叶斯推断相结合改进目标方位估计性能和优化迭代收敛过程。利用32元线阵对改进算法进行数值仿真处理和分析结果表明,该改进方法不仅可以准确估计目标信号的方位,而且可以显著地减少空间谱中伪峰的数量。实际海上实验数据处理结果表明,使用改进后的贝叶斯压缩感知方法进行DOA估计,可以显著地抑制空间谱中随机的伪峰,提高波束输出峰值背景比,具有更强的目标检测能力。 相似文献
9.
为进行强目标相关旁瓣干扰下的相邻弱目标检测,采用稀疏重建理论进行多目标方位估计。高信噪比情况下,由方位估计结果即可完成目标检测;对于低信噪比弱目标回波,为提高系统检测能力,结合方位估计结果,提出了两种检测算法,前者类似于传统CLEAN算法,从能量角度进行目标检测;后者则利用相关函数能量集中于主瓣的特点,通过计算将目标方位估计结果中非零元素置零前后匹配滤波峰值的差值,采用Page-test序贯检测器进行多目标检测。仿真和试验数据处理结果表明,相同检测概率下,第二种方法具有更加优良的弱目标检测性能。 相似文献
10.
大孔径拖曳线列阵受舰艇横向机动、洋流影响和水动力影响时会产生一定的阵形畸变,阵形畸变使得波束形成时阵列流型失配,进而降低了目标方位分辨率和阵处理的增益。在无法进行阵形估计时,基于时延估计的分裂阵时域波束形成技术将大孔径拖曳线阵分为左右两个子阵分别做波束形成,通过加权广义相关时延估计算法估算对应波束的时延差,再依据估算时延差对左右两个波束进行延时求和得到最终的波束信号。仿真和海试数据证明,相对于全阵直接做波束形成的方法,基于时延估计的分裂阵的时域波束形成技术有效提高了目标方位分辨率和阵处理的增益。 相似文献
11.
这篇文章主要介绍采用功率探测仪方式的注入式仿真系统对波束方向地面探测试验系统进行验证的系统设计和软、硬件控制与实现。通过向注入式仿真系统输入模拟目标星在不同位置发射的信号功率,以及目标星在平台坐标下的角度和位置信息,一方面确定地面探测试验系统技术方案的可行性和检测相关设备的性能,另一方面验证对目标星发射天线主波束方向的探测是否满足精度要求。通过仿真试验证明该注入式仿真系统不仅使用方便、节约成本,而且通过控制相关仪器设备能够准确记录地面探测试验系统对目标星仿真数据的计算信息,进而实现验证。 相似文献
12.
An integrated optical coherent receiver with continuous state of polarization control is proposed and analyzed. The receiver consists of an integrated optical polarization rotator, a state of polarization detector and a balanced mixer receiver. Continuous state of polarization control can be achieved by using two polarization rotators in series and feeding the polarization rotator outputs into the state of polarization detector whose subsequent output is used to control the voltage settings on the polarization rotator. For the general case, the polarization rotator is comprised of two phase shifters and a TE - TM mode converter. The state of polarization detector stage consists of a δβ directional coupler mode splitter. A novel fabrication technique for achieving efficient polarization splitting is discussed. A balanced mixer receiver is implemented using a passive directional coupler with 50/50 power splitting. The need for a passive device is demonstrated and a method for achieving accurate power splitting ratios using the proton exchange fabrication technique is discussed and experimentally demonstrated. An analysis of the performance of such a system including the balanced mixer receiver is carried out to identify the critical areas of fabrication. Discussion is also given to the function and characteristics of the electronic control loop. 相似文献
13.
Studies of a scintillator-bar detector for a neutron wall at an external target facility 总被引:1,自引:0,他引:1
To achieve a better time resolution of a scintillator-bar detector for a neutron wall at the external target facility of HIRFL-CSR, we have carried out a detailed study of the photomultiplier, the wrapping material and the coupling media. The timing properties of a scintillator-bar detector have been studied in detail with cosmic rays using a high and low level signal coincidence. A time resolution of 80~ps has been achieved in the center of the scintillator-bar detector. 相似文献
14.
YU Yu-Hong XU Hua-Gen XU Hu-Shan ZHAN Wen-Long SUN Zhi-Yu GUO Zhong-Yan HU Zheng-Guo WANG Jian-Song CHEN Jun-Ling ZHENG Chuan 《中国物理C(英文版)》2009,33(7)
To achieve a better time resolution of a scintillator-bar detector for a neutron wall at the external target facility of HIRFL-CSR, we have carried out a detailed study of the photomultiplier, the wrapping material and the coupling media. The timing properties of a scintillator-bar detector have been studied in detail with cosmic rays using a high and low level signal coincidence. A time resolution of 80 ps has been achieved in the center of the scintillator-bar detector. 相似文献
15.
The paper presents construction and principle of operation of passive IR detectors (PIR detectors) of a large detection range.
Important virtue of these detectors is highly efficient detection of slowly moving or crawling people. The described here
PIR detector detects crawling people at the distance of 140 m. To ensure high probability of detection of slowly moving objects,
new method of signals analysis was applied. On the basis of the carried out real-time measurements, both probability of detection
and false alarms were determined. 相似文献
16.
HL22Aװ�õ��Ӳ�ϵͳ��ѹʵʱ�������ܷ��� 总被引:1,自引:1,他引:0
介绍了HL-2A装置低杂波加热系统中的低压部分实时保护系统的原理和工作情况。实时保护电路工作可靠,系统低压部份响应延迟时间小于1μs。在2004年的单只速调管实验中,对波导内拉弧打火,速调管管体电流和速调管集电极过流进行了实时保护,各个保护对象都有专用的探头进行测量,其中管体电流探头精度达到0.7%。实验信号的分析表明保护系统的设计达到了实验要求,有效地保护了实验对象。 相似文献
17.
Raluca-Anca Mureşan 《Czechoslovak Journal of Physics》1997,47(9):945-949
Two neural network algorithms for data analysis in relativistic nuclear physics are presented. A neural network technique (Hopfield method) is used in order to reconstruct particle tracks starting from a data set obtained with a coordinate detector system. An algorithm for circles recognition using deformable templates is carried out and its performances are studied. The technical limitations of the detectors, which in real situation prevent the possibility to reconstruct hits right on the circle, and presence of the noise points are taken into account. 相似文献
18.
V. E. Blinov V. S. Bobrovnikov K. V. Zolotarev V. A. Kiselev S. A. Kononov G. Ya. Kurkin E. B. Levichev O. I. Meshkov N. Yu. Muchnoi S. A. Nikiti D. M. Nikoilenko D. P. Sukhanov Yu. A. Tikhonov B. P. Tolochko G. M. Tumaikin A. G. Shamov D. N. Shatilov 《Physics of Particles and Nuclei Letters》2014,11(5):620-631
The VEPP-4 accelerator-accumulator complex is designed for carrying out experiments with colliding electron-positron beams with the energy in the range of from 1 to 5 GeV using a VEPP-4M collider equipped with the KEDR magnetic detector. Experiments in the field of high-energy physics (HEP) using the complex in its present state have been being carried out since 2002. Science programs other than HEP programs are carried out in the VEPP-4, including experiments with synchrotron-radiation (SR) beams and studies on nuclear physics with an internal gas target, on verification of the CPT invariance, on accelerator physics, etc. The status of the complex, main results, methods used, new approaches, and long-term plans have been described. 相似文献
19.
To perform radiometric calibration on super wide-angle staring infrared imaging system, the calibration experiment is carried out by using a standard blackbody source with a plate shape in laboratory, and the error analysis and data inversion are made based on the calibration results. Firstly, through analyzing the influencing factors including optical system, detector and signal processing circuit, the optical response model is established. Then, the radiometric calibration experiment is developed in the darkroom environment, and the error analysis is done from six aspects, which are the temperature and radiation instability of the black body, goniometer accuracy, angular resolution, the instability of detector output, data fitting error. Finally, according to the calibration results and the imaging characteristics of short-range airplane in the system, the infrared radiation intensity of aircraft target is calculated. The radiometric calibration and data inversion will benefit obtaining the target radiation characteristic during the system application, and can provide data reference for target detection, recognition, classification, so on. 相似文献