Two resonances effect for light transmission assisted with surface plasmon through perforated metal film

When light is incident on a nonplanar metal surface, an oscillating dipole is excited at the entrance openings. We show that the enhanced transmission assisted with surface plasmon (SP) through a perforated metal film results from two different SP resonances effects: (i) zero-order Fabry-Perot resonance effect where each air hole can be considered as a section of metallic waveguide, forming a low-quality-factor resonator, and many dipoles are arranged inside the nanoholes region; and (ii) structure-factor-induced charges self-tunnelling effect due to the well-recognized surface structure periodicity, where the positive or negative charges can respectively tunnel into the right surface through the metal walls. Furthermore, when light transmits through the double-layer perforated metal films, the different transport behaviors are also clearly shown, which convinces the existence of dual SP resonances effect.     

Role of localised surface plasmon polaritons coupling in optical transmission through double-layer metal apertures

In this paper, we investigate the optical properties of the double-layer metal films perforated with single apertures by analysing the coupling of localized surface plasmon polaritons (LSPPs). It is found that the amplitude and the wavelength of transmission peak in such a structure can be adjusted by changing the longitudinal interval D between two films and the lateral displacements d_{x} and d_{y} which are parallel and perpendicular to the polarization direction of incident light, respectively. The variation of longitudinal interval D results in the redshift of transmission peak due to the change of coupling strength of LSPPs near the single apertures. The amplitude of transmission peak decreases with the increase of d_{y} and is less than that in the case of d_{x}, which originates from the difference in coupling manner between LSPPs and the localized natures of LSPPs.     

Optical transmission through metal/dielectric multilayer films perforated with periodic subwavelength slits

The transmission of p-polarized plane wave through Ag/SiO₂ multilayer films perforated with periodic subwavelength air slits is investigated by using the finite-difference time-domain (FDTD) method. The results show that the optical transmission property is mediated by the interference among the propagating coupled-SPP modes along the lateral direction inside the SiO₂ layers and the conditions of Fabry-Pérot-like resonance along the longitudinal direction together. When some geometric parameters are suitably initialized, the high transmission peaks can split into more peaks as the functional layer (metal/dielectric/metal sandwich stack) number increases, and the wavelength of the same-order transmission peak exhibits a red shift as the grating period increases.     

Broadband Terahertz Polarization Converter and Asymmetric Transmission Based on Coupled Dielectric‐Metal Grating

Coupled dielectric‐metal gratings are investigated for broadband terahertz (THz) wave polarization conversion and asymmetric transmission by the experiments and numerical simulations, which are composed of the subwavelength Si grating and metallic wire grating layers. The dielectric grating layer with a large artificial birefringence and low dispersion is employed as a phase engineered waveplate, and the metal wire grating arranged with a 45° angle to the dielectric grating is utilized as a high‐efficiency polarizer. Due to the subwavelength integration, this coupled grating presents a local resonance coupling mechanism between dielectric and metal gratings, which greatly enhances the polarization rotation and expands the bandwidth, not a simple combination with dielectric and metallic gratings. The results demonstrate that a broadband asymmetric transmission with an extinction ratio of 30dB from 0.2 to 1.2 THz is achieved and the highest transmission of 90% can be obtained. It provides a simple way towards practical applications for THz artificial dispersion materials, polarization control and asymmetric transmission.     

基于微波透射法的金属薄膜方块电阻测量理论及其应用

依据矩形波导基模的场分布表达式和电磁边界条件,解析推导了插入金属薄膜后的矩形波导透射系数,建立了考虑介质衬底影响的金属纳米薄膜微波透射系数仿真计算方法及其方块电阻的微波测量方法.运用全波电磁仿真方法对金属纳米薄膜方块电阻的微波测量装置进行了仿真验证,结果表明透射系数幅度与方块电阻的对数之间呈线性关系.采用磁控溅射工艺分别在高阻硅和玻璃两种介质衬底表面制备了不同方块电阻值的银薄膜,并测量其微波透射系数.实测结果表明,提出的方法适用于方块电阻阻值为0.05—0.5?/square的金属薄膜.研究结果对于微纳制造领域的导电薄膜方块电阻表征具有参考价值.     

Magnetooptical effects in metal-dielectric plasmonic systems

Enhancement of magneto-optical effects in two-layer systems composed of perforated metal and magnetized dielectric films is theoretically predicted. The transmission and magneto-optical effect spectra of such systems are calculated and the conditions are determined that make it possible to enhance the Faraday effect by an order of magnitude in comparison with homogeneous magnetized films.     

Wavelength de-multiplexing properties of a single aperture flanked by periodic arrays of indentations

In this paper, we explore the transmission properties of single subwavelength apertures perforated in thin metallic films flanked by asymmetric configurations of periodic arrays of indentations. It is shown how the corrugation in the input side can be used to transmit selectively only two different wavelengths. Also, by tuning the geometrical parameters defining the corrugation of the output side, these two chosen wavelengths can emerge from the structure as two very narrow beams propagating at well-defined directions. This new ability of structured metals can be used as a base to build micronmeter-sized wavelength de-multiplexers.     

Experimental verification of enhanced transmission through two-dimensionally corrugated metallic films without holes

We present experimental results to verify extraordinary optical transmission through two-dimensionally periodic, corrugated metallic films without holes as predicted by Bonod et al. [Opt. Express 11, 482 (2003)]. We also experimentally confirmed that using symmetric structures (metallic films sandwiched between two identical dielectric media) is advantageous for boosting the coupling of surface plasmons so as to create strong transmission peaks.     

Enhanced optical transmission through a nanoslit by coupling light between periodic strips and metal film

Surface plasmon resonance （SPR） is obtained by exciting the surface plasmon （SP） at the metal and dielectric interface, which can greatly enhance the extraordinary optical transmission （EOT） through a nanoslit milled in the metal film. We present a structure with a 50-nm-wide silver nanoslit for EOT by coupling light into the dielectric interlayer between periodic strips and a metal film. When the period of the metallic strips is equal to the wavelength of the SPR, the transmission efficiency of 187.6 through the nanoslit is enhanced. The metallic strip width over the nanoslit is optimized to improve transmission efficiency, and the maximal efficiency of 204.3 is achieved.     

Localized optical states in a liquid-crystal structure adjacent to a metal

The spectrum of light transmission through a structure consisting of a metallic layer and a cholesteric liquid crystal with an induced planar defect is calculated. The possibility of existence of localized states at the metal–dielectric interface of this system is demonstrated. The transmission spectra at different positions of the defect in the structure are studied.     

Enhanced transmittance of a dual pass-band metamaterial filter

A broad pass-band metamaterial-based optical filter is experimentally and numerically studied. The designed structure consists of periodically arranged composite metallic arrays and dielectric layer that exhibits transmission responses composed of two flat pass-bands. The coupling of localized surface plasmon (LSP) modes results in the low-frequency pass-band, while the internal surface plasmon polaritons (ISPPs) between the upper and lower metal layers leads to the high-frequency pass-band. Structural parameters (L and R) are experimentally considered from the viewpoint of exploiting their effects on the pass-bands and resonance frequencies. The bandwidths of these pass-bands both can reach to maximums by optimization of these structural parameters. In addition, the two pass-bands can be modulated to be a single pass-band with a bandwidth of 10.7 THz by optimizing L and R simultaneously.     

Highly confined hybrid spoof surface plasmons in ultrathin metal-dielectric heterostructures

Highly confined "spoof" surface plasmons (SSPs) are theoretically predicted to exist in a perforated metal film coated with a thin dielectric layer. Strong modes confinement results from the additional waveguiding by the layer. Spectral characteristics, field distribution, and lifetime of these SSPs are tunable by the holes' size and shape. SSPs exist both above and below the light line, offering two classes of applications: "perfect" far-field absorption and efficient emission into guided modes. It is experimentally shown that these plasmonlike modes can turn thin, weakly absorbing semiconductor films into perfect absorbers.     

Pulsed laser deposition of perovskite relaxor ferroelectric thin films

Structural, dielectric and ferroelectric properties of thin films of La-doped lead zirconate titanate (PLZT) and sodium bismuth titanate-barium titanate (NBT-BT) perovskite relaxor ferroelectric have been investigated. PLZT films were deposited on Pt/Si substrates in oxygen atmosphere by pulsed laser deposition (PLD) and radio frequency (RF) discharge-assisted PLD, using sintered targets with different La content and Zr/Ti ratio, near or at the boundary relaxor ferroelectric. The films are polycrystalline with perovskite cubic or slightly rhombohedral structure. A slim ferroelectric hysteresis loop, typical for relaxors, has been measured for all film sets. Dielectric characterization shows a large value of capacitance tunability and low dielectric loss. However, common problems related to lead diffusion into the metallic electrode layer do not allow one to obtain high capacitance values, due to the formation of an interface layer with low dielectric constant. Lead-free NBT-BT thin films have been deposited on single crystal (1 0 0)-MgO substrates starting from targets with composition at the morphotropic phase boundary between rhombohedral and tetragonal phase. Films deposited by PLD are polycrystalline perovskite with a slight (1 0 0) orientation. Capacitance measurements were performed using interdigital metallic electrodes deposited on the film's top surface and showed high relative dielectric constant, on the order of 1300.     

Design of near-unity transmittance dielectric/Ag/ITO electrodes for GaN-based light-emitting diodes

We designed a near-unity transmittance dielectric/Ag/ITO electrode for high-efficiency GaN-based light-emitting diodes by using the scattering matrix method. The transmittance of an ultrathin metal layer, sandwiched between a dielectric layer and an ITO layer, was investigated as a function of the thickness and the optical constant of each constituent layer. Three different metals (Ag, Au, and Al) were examined as the metal layer. The analytical simulation indicated that the transmittance of a dielectric/metal/ITO multilayer film is maximized with an approximately 10-nm-thick Ag layer. Additionally, the transmittance also tends to increase as the refractive index of the upper dielectric layer increases. By tailoring the thickness of the dielectric layer and the ITO layer, the dielectric/Ag/ITO structure yielded a transmittance of 0.97, which surpasses the maximum transmittance (0.91) of a single ITO film. Furthermore, this extraordinary transmittance was present for other visible wavelengths of light, including violet and green colors. A complex phasor diagram model confirmed that the transmittance of the dielectric/metal/ITO multilayer film is influenced by the interference of reflected partial waves. These numerical findings underpin a rational design principle for metal-based multilayer films that are utilized as transparent electrodes for the development of efficient light-emitting diodes and solar cell devices.     

渔网电磁超介质左手通带的超常透射及其电场增强效应的数值研究

本文利用电磁场数值模拟方法研究了分布矩形孔阵列的"金属-电介质-金属"三明治渔网电磁超介质在其左手通带发生的超常透射现象和不同模式激发下的电场增强效应。结果证实左手通带紧邻的超常光学传输峰源于波导共振模式,利用超常传输效应可以有效降低电磁超介质的损耗,提高左手性能;波导共振模和左手通带对应的反对称磁模能够分别在孔洞和金属夹层区域激发超过11倍的增强电场,因此渔网电磁超介质结构在表面增强光谱和传感等方面也具有潜在应用价值。     

吸收介质膜/金属空芯光纤的太赫兹波传输特性

介质/金属结构空芯光纤是一种有发展前景的太赫兹波传输媒质.介质膜在有效增加内面反射率从而降低传输损耗的同时,其材料吸收会引起附加损耗.讨论了介质材料吸收对太赫兹空芯光纤结构参数的影响.计算结果表明,相比于无吸收的理想介质,吸收介质的最优膜厚变小.最优折射率变大.综合考虑了光纤内直径、介质膜折射率和传输波长等因素,分析了介质膜的材料吸收容限.分析结果表明,吸收容限随光纤内直径减小或传输波长增大而减小.当光纤内直径很小或传输波长很大时,吸收容限可能不存在.分析结果对介质/金属太赫兹空芯光纤的设计和材料选择具有重要参考价值.     

Role of shape in middle-infrared transmission enhancement through periodically perforated metal films

We report experimental results on the role of aperture shape in middle-infrared enhanced transmission through a metal film perforated with a periodic aperture array. The transmission spectrum is highly dependent on the aperture shape. When the aperture shape changes from circular to cross-dipole or the cross-dipole arm length increases, the transmission spectrum exhibits a large redshift. The enhanced transmission is proposed to be an interplay of surface plasmon polaritions at the metal surface and localized surface plasmons (LSPs) inside the apertures. The shift of the transmission bands is proposed to be due to the redshift of the LSP resonance spectrum of the individual apertures. The role of shape in enhanced transmission in the cascaded structure is also studied.     

Investigation of the thickness of Ag, AgI films in the capillary for hollow waveguides

A metallic (Ag)–dielectric (AgI) hollow glass waveguide is a promising and flexible fiber for the delivery of high-power CO₂ laser radiation. The thickness of metallic (Ag) films and dielectric (AgI) films is a critical factor which greatly influences the attenuation of the waveguides. In this paper, metallic (Ag)–dielectric (AgI) films were successfully prepared in the capillary whose inner diameter is 0.53 mm, and firstly investigated with theoretical analysis and measured by means of AES and SEM. There is good agreement between theoretical thickness and experimental results, which confirms the validity of the theoretical analysis, which makes the estimate of the thickness of both the metallic and dielectric films possible with high accuracy prior to the preparation of hollow glass waveguides. The attenuation spectra of Ag/AgI hollow waveguides shows the loss increases with the thickness of Ag, AgI films and indicates that the Ag/AgI hollow waveguide is suitable for the transmission of IR radiation.     

Nature of subpicosecond terahertz pulse propagation in practical dielectric-filled parallel-plate waveguides

It is analytically shown that the presence of submicrometer-sized air gaps between the dielectric and metal contact surfaces in a dielectric-filled metallic parallel-plate waveguide can have a dramatic effect on the guided-wave propagation of subpicosecond terahertz pulses. Through the use of metal-evaporated dielectric surfaces to overcome the imperfect contact problem, and a special air-dielectric-air cascaded waveguide geometry to avoid multimode excitation, undistorted subpicosecond terahertz pulse propagation via the single-TEM mode is demonstrated, for what is believed to be the first time, in a silicon-filled PPWG.     

Slow light with symmetric gap plasmon guides with finite width metal claddings

We study the dispersion relation and the modes of a symmetric gap plasmon guide, where a dielectric planar slab is coated with finite metallic layers on both top and bottom. The finite conductivity of the metal is taken into account. The modes of the structure exhibit significant differences from those of dielectric waveguides with air or metal as the bounding media. Avoided level crossing phenomenon between the plasmon and the guided modes is shown to exist, leading to leaky modes. The structure sandwiched between two high index media is shown to lead to slow light in transmission. The group delay is shown to be larger for higher order modes.