利用相位光阑实现高斯光束均匀化

高斯光束均匀化是许多应用所要求的。本文提出只用一个简单的相位光阑实现高斯光束强度均匀化的新方法，给出了计算结果。这是一种简单、高效和均匀化程度好的高斯光束均匀化方法。     

用于高斯光束均匀化的非球面透镜系统分析与设计

提出一种用于高斯光束均匀化的透镜系统，论述这一系统实现高斯光束均匀化的基本原理，介绍系统的具体设计方法，并在具体参数下给出实际的加工曲线和光学结构。     

超短脉冲复宗量辛格高斯光束

利用理论解析推导的方法，在傍轴近似条件下，给出了一组新的超短脉冲光束的解析解，称为超短脉冲复宗量辛格高斯光束.此脉冲光束解的每个频率分量都是复宗量高斯光束，时间脉冲的形状为辛格函数.对这种超短脉冲光束及其在自由空间中的传输过程进行了较为细致的研究，讨论了超短脉冲复宗量辛格高斯光束的轴上光强、光强的横向分布、脉冲极性反转、脉冲延迟等性质. 关键词： 脉冲光束 缓变包络近似 脉冲传输     

高质量全息光栅的制作

全息光栅由感光版记录高斯光束干涉条纹制得 ,干涉条纹的不等宽性降低了光栅品质。制取高质量全息光栅的关键是要用均匀平面波作光源。在分析干涉区内光强分布的基础上 ,给出了制作等周期正弦全息光栅的两种方法 :限制曝光区大小的方法和高斯光束强度均匀化的方法。     

径向偏振高阶贝塞尔-高斯涡旋光束的传输及其偏振特性

理论和实验研究了径向偏振高阶贝塞尔-高斯涡旋光束在自由空间传输的光强分布和偏振特性.数值计算表明,在无衍射区域,随着传输距离的增加,光强分布基本保持不变;对于零阶光束,其偏振态一直保持径向偏振不变;对于高阶光束,其偏振态发生变化,由初始的径向偏振逐渐变为椭圆偏振和线偏振的杂化状态.实验上,利用径向偏振转换器、螺旋相位板和轴棱锥元件产生了径向偏振高阶贝塞尔-高斯涡旋光束,探测了其通过不同偏振片后的光强分布.实验结果与理论结果基本相符合.该研究也提供了一种产生杂化偏振矢量光束的方法.     

BSO晶体空间光学双稳态

在理论上预言了一种新的参量空间光学双稳态，即以偏置电压为输入参量，Ｂｉ１２ＳｉＯ２０晶体输出的高斯光束远场光斑中心点的光强为输出参量和输入高斯光束功率为常量的一种光学双稳态。并且在实验中分别实现了正偏置和反偏置两种情况下的偏置双稳态。     

快速测定微束激光束径

对激光(高斯光束)束径的测量方法已有多种,80年代发展起来的光栅遮挡法(Ronchi Ruling Method),是一种快速、简单的实验方法,能测量与光栅常数等数量级的激光束径。在物理实验教学中,有助于学生了解高斯光束的光强分布、发散度等问题。基本原理高斯光束径向光强分布为     

艾里光束的光强闪烁研究EI北大核心CSCD

基于Rytov方法并采用von-Karman模型对艾里光束的光强闪烁进行了分析。根据接收器接收面上光强度分布不均匀的现象,提出了艾里光束的面光强闪烁模型,推导了艾里光束在大气湍流中的面光强闪烁的表达式。数值仿真结果表明:当光束宽度一定时,相同光束传播距离下指数截断因子越小,光强闪烁越小;当传播距离为3km、指数截断因子为0.2时,艾里光束的宽度约为1.6cm,光强闪烁最小。此外,光源强度和接收光强相同时,将艾里光束与高斯光束进行了对比,发现艾里光束的光强闪烁小于高斯光束的光强闪烁。     

对称化光学系统对像散复宗量厄米-高斯光束的变换

 使用二阶矩和广义惠更斯 菲涅尔衍射积分方法研究了用于实宗量厄米高斯光束对称化的光学系统对复宗量厄米-高斯光束的变换。研究结果表明：复宗量厄米-高斯光束经过该光学系统后，只能在出射面上实现在二阶矩定义下的对称化，但光斑不具有旋转对称性。因此，这套用于实宗量光束对称化的光学系统对复宗量光束并不适用。     

艾里光束的光强闪烁研究

基于Rytov方法并采用von-Karman模型对艾里光束的光强闪烁进行了分析。根据接收器接收面上光强度分布不均匀的现象,提出了艾里光束的面光强闪烁模型,推导了艾里光束在大气湍流中的面光强闪烁的表达式。数值仿真结果表明:当光束宽度一定时,相同光束传播距离下指数截断因子越小,光强闪烁越小;当传播距离为3km、指数截断因子为0.2时,艾里光束的宽度约为1.6cm,光强闪烁最小。此外,光源强度和接收光强相同时,将艾里光束与高斯光束进行了对比,发现艾里光束的光强闪烁小于高斯光束的光强闪烁。     

Suppression for the Low spatial frequency Rings and Ripples of Laser Near field Intensity Distribution in the Spatial Filter Used in ICF Laser DriveSupported by the key project of the National Science Foundation, National Hi Tech Foundation.

１ＩｎｔｒｏｄｕｃｔｉｏｎＵｎｉｆｏｒｍｉｔｙｏｆｔｈｅｆｌｕｅｎｃｅｄｉｓｔｒｉｂｕｔｉｏｎｄｅｌｉｖｅｒｅｄｂｙａｌａｓｅｒｉｓｅｓｅｎｔｉａｌｆｏｒｍａｎｙａｐｐｌｉｃａｔｉｏｎｓ,ｓｕｃｈａｓｏｐｔｉｃａｌｐｒｏｃｅｓｉｎｇ,ｓｕｒｆａｃｅｔ...     

OFLID: Simple method of overlap factor calculation with laser intensity distribution for biaxial lidar

We proposed a simple overlap factor calculation method based on laser intensity distribution (OFLID), which is simple, practical and can be applied to any specific laser intensity distribution. In order to obtain the laser intensity distribution and parameters of our laser system, we designed a simple experiment to measure them, and then simulated an ideal Gaussian and uniform laser intensity distribution with the measured parameters. The OFLID calculation results indicated that the overlap factor of the measured distribution has approximately half the relative error of that of the ideal Gaussian distribution in the increasing range field for our lidar. Specifically, the laser intensity distribution should be regarded in the overlap correction of the lidar signal. Theoretically, the OFLID method can reduce the error caused by the hypothesis of ideal uniform or Gaussian intensity distributions in the analytical method. In addition, the method is easy to implement for overlap correction, signal simulation and system configuration optimization for biaxial lidar.     

大气湍流中超短高斯激光脉冲的时间域展宽模型研究

穿过大气湍流的高斯激光脉冲在时间域的展宽行为与高斯脉冲通过理想高斯滤波器后的时域展宽行为相似。因此,为了激光通信信道仿真的需要,提出用级联巴特沃斯滤波器来逼近理想高斯滤波器的方法对这种时间域上的展宽行为进行建模。逼近后的高斯滤波器的3dB频率点与大气湍流的物理参数(包括折射率结构常数和湍流外尺度)和传播几何路径长度联系在一起,从而将高斯脉冲的展宽与所通过的大气湍流环境参数相结合并得到了模拟高斯脉冲展宽的解析表达式。该模型和由模型参数表示的高斯脉冲展宽的解析表达式不仅在湍流弱起伏区有效,而且在从弱起伏到中等起伏再到强起伏的整个区域中都有效。     

无外加氟施主产生KrF准分子发射谱实验研究

We report a new technique to suppress the low-spatial-frequency rings and ripples (LSFRs) of laser near-field intensity distribution in the spatial filter (SF) used in ICF laser drivers. This technique employs a spatial filter with Gaussian transmission, instead of the hard-edged pinhole, at the confocal plane of a Newtonian telescope. The resulting beam has a super-Gaussian transverse intensity profile without the LSFRs that certainly appear when a hard-pinhole was used as a filter in the conventional technique.     

Geometrical form factor calculation using Monte Carlo integration for lidar

We proposed a geometrical form factor (GFF) calculation using Monte Carlo integration (GFF–MC) for lidar that is practical and can be applied to any laser intensity distribution. Theoretical results have been calculated with our method based on the functions of measured, uniform and Gaussian laser intensity distribution. Two experimental GFF traces on clear days are obtained to verify the validity of the theoretical results. The results indicated that the measured distribution function outperformed the Gaussian and uniform functions. That means that the deviation of the measured laser intensity distribution from an ideal one can be too large to neglect. In addition, the theoretical GFF of the uniform distribution had a larger error than that of the Gaussian distribution. Furthermore, the effects of the inclination angle of the laser beam and the central obstruction of the support structure of the second mirror of the telescope are discussed in this study.     

二元振幅型面板用于光束空间整形

为了提高高功率激光系统的整体效率和充分利用光能,需要对前端注入的高斯光束进行空间整形,实现驱动器终端激光的均匀化输出.采用振幅型二元面板对激光光束进行空间强度整形,利用误差扩散法进行了理论设计,数值摸拟了整形效果,同时讨论了面板加工误差以及空间滤波器的小孔大小等因素带来的影响.根据理论设计,分别加工了反高斯透射率分布和抛物线透射率分布的二元面板,并进行了整形实验,实现了各自的整形功能,并做了误差分析.实验让明二元面板能对激光光束的空间强度分布实现了精确的整形.     

基于EKF的水下LD通信精对准控制算法

高速激光通信中接收机与光斑中心很难处于精对准状态,导致水下光通信链路难以稳定建立.首先采用蒙特卡洛仿真统计法分析激光光子在海水中传输的接收光强分布规律,再通过实验对接收端的光斑图像进行采样分析,利用曲线拟合得到接收器位置与接收光强的关系.仿真与实验结果表明:光束经过25 m的水下传输,接收光强分布仍近似为高斯分布.采用非线性估计算法(扩展卡尔曼滤波)与基本状态控制反馈理论,根据接收光强度估计接收器当前位置与最大光强处的距离,通过反馈算法实现接收端与光斑中心的主动跟踪对准.算法仿真结果显示,接收端对准误差在2 mm以下,稳定后接收效率超过98%.     

Power Density Distribution Simulation and Relevant Heat Effect Calculation of a High-power CO2 Laser with Low Order Modes

The vertical excitation axial-flux kilowatt CO2 laser is an equipment widely used in the high-power laser heat treatment industrial applications. The experimental measurements indicate that the power density distribution of laser beam is generally of ring distribution with a sunken at the center, therefore the laser beam cannot be simply regarded as base mode Gaussian beam. In this paper, such laser beam is regarded as the non-interference superposition of TEM00 and TEM01 mode beams, the method to determine the simulation parameters is discussed, and the relevant heat effect calculation equation is deduced.     

诱导空间非相干束匀滑技术的近区特性及改善技术

诱导空间非相干技术是面向激光驱动惯性约束核聚变的一种具有自身独特优势的束匀滑方法.然而直接使用诱导空间非相干方法将引起强烈的近区强度空间调制,这将威胁装置的运行安全,并严重限制装置的最大输出能力.这也是该方法应用于聚变级高功率激光装置的主要技术障碍之一.本文介绍了一种通过双透镜滤波系统对诱导空间非相干束匀滑技术导致的近区空间强度调制进行匀滑的技术.利用该技术可以在保留诱导空间非相干束匀滑方法的先天优势(更好的远区匀滑特性)的前提下,获得均匀、稳定的近区强度分布,从而避免高功率激光系统在使用诱导空间非相干束匀滑技术时,因为近区强度不均匀、不稳定导致的器件损伤及输出能力受限.在理论建模和数值分析的基础上,以近区调制度、软化因子和透过率为主要评价指标,对比分析了方形、圆形、高斯型等3种滤波孔在不同尺寸下的近区输出效果,最终给出了一种典型的优化结果:16×16诱导空间非相干分割数、0.8倍衍射极限宽度、方形小孔.此时近区强度分布均匀,同时保证了较好的远区匀滑效果和高的能量利用率.在此基础上,针对装置的实际应用情况,进一步分析了准直误差对近区强度分布的影响,结果表明准直误差小于0.1倍衍射极限便不会影响输出的近区质量.对诱导空间非相干束匀滑方法所得焦斑的模拟分析表明,滤波系统的加入能进一步改善焦斑的低频不均匀性.     

Non-iterative spot center location algorithm based on Gaussian for fish-eye imaging laser warning system

The directional accuracy of threaten laser is highly dependent on the laser spot center location accuracy for the laser warning system. On the basis of analyzing the spot features on wide field of view (FOV) fish-eye imaging laser warning system, a refinement of existing methodology based on fitting a 2D Gaussian distribution for estimating the center of the spot is developed. The proposed procedure is using a linear least squares based algorithm to determine the best-fitting parameters of the Gaussian. However, in contrast to the standard Gaussian Fitting procedure, this new scheme gives rise to equations that are rigorously linear in the transformed unknown parameters which can be solved easily by linear least squares estimators. To validate the accuracy of the proposed algorithms, experimental approaches with a type of laser warning detector and simulated threaten laser in laboratory are used to quantify its performance. The experimental results show that this method outperforms significantly the commonly used location technique. It is less susceptible to the non-100% fill ratio of CMOS and large unsymmetrical optical aberration of fish-eye lens. The positioning precision in paraxial region and 80° incident angle region are 1/60 pixels, 1/30 pixels respectively. The biggest error is less than 1/20 pixels. The proposed method is suitable for wide FOV laser warning system for high accuracy and low computational complexity.