The effect of nitrobenzene on the Raman spectra of ribonuclease in aqueous solution

The Raman spectra of the native ribonuclease treated with nitrobenzene in aqueous solution have been obtianed. The conformation of the main chain and the side chain in ribonuclease were studied. Among the amide Ⅰ and amide Ⅲ bands, the characters of β-sheet and random coil structures are clear. The disulfide bridges assume the gauche-gauche-gauche conformation. The parts of tyrosine residue are buried. It indicates that nitrobenzene treatment on protein aqueous solution is an efficient means for obtaining better Raman spectra.     

Second-order solutions for random interfacial waves in N-layer density-stratified fluid with steady uniform currents

In the present paper, the random interfacial waves in N-layer density-stratified fluids moving at different steady uniform speeds are researched by using an expansion technique, and the second-order asymptotic solutions of the random displacements of the density interfaces and the associated velocity potentials in N-layer fluid are presented based on the small amplitude wave theory. The obtained results indicate that the wave-wave second-order nonlinear interactions of the wave components and the second-order nonlinear interactions between the waves and currents are described. As expected, the solutions include those derived by Chen （2006） as a special case where the steady uniform currents of the N-layer fluids are taken as zero, and the solutions also reduce to those obtained by Song （2005） for second-order solutions for random interfacial waves with steady uniform currents if N = 2.     

Protein–membrane interactions investigated with surface-induced fluorescence attenuation

Research on protein–membrane interactions has been undeveloped due to the lack of proper techniques to detect the position of proteins at membranes because membranes are usually only about 4-nm thick. We have recently developed a new method named surface-induced fluorescence attenuation(SIFA) to track both vertical and lateral kinetics of a single labelling dye in supported lipid bilayers. It takes advantage of strong interaction between a light-emitting dye and a partially reflecting surface. By applying the technique to membrane proteins being fluorescently labelled at different residues, here we show that SIFA can measure not only the insertion depth of a dye inside a lipid bilayer, but also the position of a dye in solution near the surface. SIFA can therefore be used to study membrane proteins of various types.     

Subwavelength Imaging in a One-Dimensional Metal-Dielectric Structure

We analyse the dispersion relation of a one-dimensional （1D） metal-dielectric （MD） structure for H-polarized light （i.e. the magnetic field is parallel to the interfaces of the layers） and use the transfer matrix method to simulate the subwavelength image effect through the 1D-MD structure. The structure operates in the self-collimation regime, and does not involve negative refraction or amplification of evanescent waves. The Fabry-Perot resonance effect is studied in order to obtain optimum parameters for maximum transmission. A resolution of ）λ/10 for a single point source is achieved when the thickness of the 1D-MD is about 300 nm. Taking into account the actual values of the dielectric constants of the metal （silver） and the dielectric （HfO2） layers, we find that a silver/HfO2 stack, with suitable parameters, has a resolution of λ/5 at visible wavelengths.     

GaAs-Based Metamorphic Long-Wavelength InAs Quantum Dots Grown by Molecular Beam Epitaxy

A bilayer stacked InAs/GaAs quantum dot structure grown by molecular beam epitaxy on an In0.05Ga0.95As metamorphic buffer is investigated. By introducing a InGaAs：Sb cover layer on the upper InAs quantum dots （QDs） layers, the emission wavelength of the QDs is extended successfully to 1.533 μm at room temperature, and the density of the QDs is in the range of 4× 10^9-8 ×10^9cm^-2. Strong photoluminescence （PL） intensity with a full width at half maximum of 28.6meV of the PL spectrum shows good optical quality of the bilayer QDs. The growth of bilayer QDs on metamorphic buffers offers a useful way to extend the wavelengths of GaAs-based materials for potential applications in optoeleetronic and quantum functional devices.     

Effects of layer stacking and strain on electronic transport in two-dimensional tin monoxide

Tin monoxide(SnO) is an interesting two-dimensional material because it is a rare oxide semiconductor with bipolar conductivity.However, the lower room temperature mobility limits the applications of SnO in the future.Thus, we systematically investigate the effects of different layer structures and strains on the electron–phonon coupling and phonon-limited mobility of SnO.The A_(2u)phonon mode in the high-frequency region is the main contributor to the coupling with electrons for different layer structures.Moreover, the orbital hybridization of Sn atoms existing only in the bilayer structure changes the conduction band edge and conspicuously decreases the electron–phonon coupling, and thus the electronic transport performance of the bilayer is superior to that of other layers.In addition, the compressive strain of ε =-1.0% in the monolayer structure results in a conduction band minimum(CBM) consisting of two valleys at the Γ point and along the M–Γ line, and also leads to the intervalley electronic scattering assisted by the E_(g(-1))mode.However, the electron–phonon coupling regionally transferring from high frequency A_(2u)to low frequency E_(g(-1))results in little change of mobility.     

Interfaces in ionic devices

The technology of Ionics is based on the availability of materials with fast ion transport. Individual materials are, however, meaningless from a practical point of view; all applications require combinations of materials with appropriate ionic and electronic properties. This situation is similar to Electronics which requires combinations of semi-conducting or metallic conducting materials with differences in the chemical potentials of the electrons. The technology of Ionics requires interfaces between ionic and electronic conductors which generate strong electrical fields or allow to modify the field by the application of external voltages. Ions and electrons equilibrate both at these “ionic junctions”. While semi-conductor junctions have commonly a width in the μm-range, the space charge region is several orders of magnitude smaller in the case of ionic junctions, i.e. in the nm or even sub-nm-range. The interfaces have to be chemically stable for the lifetime of the device which is difficult to achieve in view of the commonly large number of components present in both phases and the existence of mobile species with sometimes large variations in the activity of the electroactive component. Furthermore, the kinetics of transfer of ions across the interface has to be fast to allow high current densities which are required in many cases. In addition, two such interfaces are required to convert the electronic current into an ionic one and again back into an electronic current at the opposite side of the electrolyte. The development of ionic devices depends to the strongest extent on the engineering of appropriate interfaces. Examples of the role and engineering of interfaces will be presented for applicationes such as chemical sensors, electrochromic devices, fuel cells, batteries and photogalvanic solar cells.     

Raman spectroscopic study on Hela cells irradiated by X rays of different doses

Raman spectra are used for studying the structure and protein, nucleic acid, lipid, and carbohydrate contents, while cervical cancer cells irradiated by X rays of different doses are cultivated for 24 h. After irradiation by X rays, the following results are obtained. （1） Some 12-Gy groups move to the 1237-cm^-1 band in compared with the control group＇s 1240-cm^-1 band; after irradiation by 6-Gy X ray, the 1662-cm^-1 band of amide I has a blue shift of 10 cm^-1. The above two parts show that because of X ray irradiation, some proteins＇ random coil structures have transformed into β folding. （2） The 759-cm^-1 band disappear in the 6-Gy group; the 570-cm^-1 band of every group has a red shift, but the changes in intensity are different; the 1335-cm^-1 band in every group has a blue shift, and all their intensities increase. These show that although the 570-, 759-, and 1335-cm^-1 bands all belong to the tryptophan residue indole ring vibration, the molecular vibration energy structures which produce scattering lights are different. （3） The 786-cm^-1 band only has a blue shift of 3 cm^-1 in the 6-Gy group, and the non-hydrogen band of the phosphoric acid diester （O-P-O） increases. The frequency deviation of the 1089-cm^-1 band is erratic, and the bent symmetry stretch vibration conformation of phosphoric acid diester key （O=P=O） in the nucleic acid is complex. （4） The 1570-cm^-1 band has a blue shift, and its intensities all decrease, while the C=C conjugated duplet bond oxidizes, and the content of C=C decreases.     

Density functional calculations of efficient H_2 separation from impurity gases(H_2,N_2,H_2O,CO,Cl_2, and CH_4)via bilayer g-C_3N_4 membrane

Membrane technology has been used for H_2 purification. In this paper, the systematic density functional simulations are conducted to study the separation of H_2 from the impurity gases(H_2, N_2, H_2 O, CO, Cl_2, and CH_4) by the bilayer porous graphitic carbon nitride(g-C_3 N_4) membrane. Theoretically, the bilayer g-C3 N4 membrane with a diameter of about3.25 A? should be a perfect candidate for H_2 purification from these mixed gases, which is verified by the high selectivity(S) for H_2 over other kinds of gases(3.43 × 1028 for H_2/N2; 1.40 × 1028 for H_262/H_2 O; 1.60 × 10 for H_2/CO; 4.30 × 10~(14) for H_2/Cl_2; 2.50 × 10~(55) for H_2/CH_4), and the permeance(P) of H_2(13 mol/m~2·s·Pa) across the bilayer g-C_3 N_4 membrane at 300 K, which should be of great potential in energy and environmental research. Our studies highlight a new approach towards the final goal of high P and high S molecular-sieving membranes used in simple structural engineering.     

Interfacial effect on the reverse of magnetization and ultrafast demagnetization in Co/Ni bilayers with perpendicular magnetic anisotropy

For static magnetic properties of the Co/Ni bilayers, macroscopic hysteresis loops and microscopic magnetic moment distributions have been determined by the object oriented micromagnetic framework(OOMMF). It is found that when the bilayer systems are fully decoupled, the magnetizations of the two phases reverse separately. The coercivity of the bilayers decreases to a valley value sharply with increasing interfacial exchange coupling and then rises slowly to a platform. On the other hand, we have carried out an atomistic simulation for the laser-induced ultrafast demagnetization of the Co/Ni bilayer. A larger damping constant leads to a faster demagnetization as well as a larger degree of demagnetization, which is consistent with the first-principle theoretical results. For the magnetization recovery process, the damping constant has different influences on the recovery time with various peak electron temperatures, which is ignored in previous atomistic simulations as well as the Landau–Liftshit–Bloch(LLB) micromagnetic calculations. Furthermore, as the interfacial exchange coupling increases, the ultrafast demagnetization curves for Co and Ni become coincident, which is a demonstration for the transition from two-phase phenomenon to single-phase phenomenon.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.