共查询到20条相似文献,搜索用时 187 毫秒
1.
2.
3.
针对目前部队大型车辆及地方B照以上大中型车辆桩考无人值守训练的实际需求,设计了一种基于接近式开关采集违规信号、单片机控制及语音告警组成的车载便携式智能桩考训练装置;阐述了系统硬件与软件的设计实现;给出了违规信号获取与编码、违规位置自动识别和语音告警等关键技术的具体解决方法;并对系统核心电路控制单元进行验证,输入编码20 H时,软件自动识别后输出6个告警控制脉冲,并判决为右侧违规,与编码设计完全拟合;由此表明该装置设计合理,满足部队训练需求,为部队执行多样化任务提供有力保障。 相似文献
4.
某型导弹组件较多、构成复杂、故障模式极多,属于科技密集型复杂系统。为了达到缩短维修时间、提高维修效率的目的,需要通过计算机仿真的方式训练部队基层维修人员及工程测试人员。这一目的的实现需要首先建立一套全面、真实的故障仿真系统。通过对故障模式的分析及建模,完成了故障模型在系统仿真模型中的引入工作,从而得到了一套仿真训练系统,并在该训练系统中进行了故障的仿真复现。从复现结果来看,该套仿真训练系统能够真实的反映产品在故障模式下的实际响应。本文中描述的故障仿真系统属首次在导弹类复杂武器系统的维修训练中投入使用,在国内处于领先地位,具有较高的应用推广价值。 相似文献
5.
6.
7.
8.
针对红外经纬仪网络训练和实景训练,研究了红外经纬仪实景实装训练系统;系统在保证装备原有功能的基础上,增加了装备与训练中心的IP组播通信和图像传输功能;训练时,背景由红外相机输出的实景背景灰度图像变换获得;目标弹道数据采用本机产生或组播方式从训练中心获;仿真目标图像利用DirectX3D技术实现,并根据弹道数据和经纬仪跟踪位置将仿真目标融合叠加到实景背景上;实时数据及图像由本机或训练中心记录,用于训练评估和复演;应用证明,系统能够对操作手进行模拟实战训练,提高装备的操作熟练程度;系统相关技术对于靶场其他型号的光学测量装备实景实装训练系统研究有借鉴价值。 相似文献
9.
10.
基于常规速调管,研制了用于开展空间功率合成实验的微波源系统。介绍了50 MW超大功率速调管发射机的系统组成、大功率速调管、相位控制及高功率测试系统等。重点阐述了超大功率速调管发射机的关键技术,并针对超大功率发射机的设计难点提出了具体的解决方案。为提高超大功率发射机的可靠性,设计了基于绝缘栅双极晶体管(IGBT)的感应叠加型全固态调制器。给出了超大功率发射机的测试结果,并探讨了超大功率速调管发射机的改进方法。最后对基于常规速调管,研制用于空间功率合成微波源系统的发展进行了展望。 相似文献
11.
12.
针对高炮电视跟踪系统目前无法通过实装试验方式对超低空目标截获概率进行考核的问题,分析了影响截获概率的因素,如地面图像和目标同时处于光电系统视场中对光电系统图像处理的影响,通过搭建软件和硬件环境,建立了一种基于三维虚拟试验场的仿真试验方法。构建了典型的测试用例,利用仿真系统采集视频,将图像输入到视频跟踪器中进行处理,通过对输出数据进行处理,可定性或定量判定是否可以截获目标。该方法应用于某型轮式弹炮结合防空武器系统试验,验证了该方法的有效性。 相似文献
13.
14.
15.
提出一种系统探测的逻辑控制方案.该方案以FPGA设计技术为核心,基于模块化编程思想,实现整个系统的逻辑控制功能.通过计算机仿真和实际电路测试,给出ens、ad_elk、oe、hbe等关键信号的逻辑时序仿真和测试波形.信号处理通道转换、电路延时、功耗等指标分析与测试表明,设计具有实时性、高集成度、高可靠性、低功耗和灵活性等特点. 相似文献
16.
为了验证空间光学系统热设计的合理性,利用光-机-热集成的热光学分析技术论证了空间光学系统的热设计方案。首先,阐述了热光学技术的一般方法以及热光学技术与热设计的关系,同时根据空间光学遥感器所处的空间环境和结构特点,应用被动和主动热控技术对空间光学系统进行了热设计。然后,利用有限元方法对热控后的温度场和热弹性变形进行了分析,得出该温度载荷条件下光学元件表面的变形量及刚体位移量,利用Zemike多项式进行了波面拟合。最后,用CodeV光学设计软件计算了热载荷作用下光学系统的传递函数。结果表明,各种工况下全视场范围内光学系统分辨率为50lp时,传递函数均超过0.5,成像良好,能够满足光学设计指标,热设计方案合理可行。 相似文献
17.
Fanglai Zhu 《Physics letters. A》2008,372(3):223-232
The Letter deals with the problem of synchronization of chaotic dynamic system with unknown disturbances and parameters based on observer. First, under some assumptions for drive system, a kind of full-order observer-based synchronization method is summarized. The response system is a robust adaptive full-order observer with adaptation laws for the unknown disturbances and parameters. Second, under the same assumptions, a reduced-order observer-based response system which can synchronize part states of drive system is developed. By choosing a special reduced-order gain matrix, the reduced-order observer-based response system is able to eliminate the influence of the unknown disturbances and parameters directly, so it is unnecessary for one to design the adaptation laws of them. Finally, some numerical simulations for Lorenz chaotic system are design and the simulation results are analyzed in detail. 相似文献
18.
19.
The paper proposes a catadioptric infrared dual band optical system based on catadioptric configuration and optically passive athermal design method. The system shares primary mirror, secondary mirror and collimating lens group, and achieves abruption in longwave infrared and midwave infrared using a dichroic beam splitter. The influence of temperature on optical parameters, the design theory and design method are analyzed. A design example is presented. The detailed optimization design method and some considering factors in engineering design moment are discussed. The design results illustrate that the system can obtain good image quality in environment temperature of 10–40?°C, which could satisfy the design requirement. The actual test result not only satisfies the design requirement, but also validates the availability of the method in the paper. 相似文献
20.
WU Jin-Jie HENG Yue-Kun SUN Zhi-Jia WU Chong ZHAO Yu-Da YANG Gui-An JIANG Chun-Hua 《中国物理C(英文版)》2008,32(3)
A new charge measurement method, time over threshold (TOT), has been used in some gas detectors lately. Here TOT is studied for TOF system, made of plastic scintillator counter, which can simplify the electronics of the system. The signal characteristics are measured and analyzed with a high quality oscilloscope, including noise, pedestal, signal amplitude, total charge, rise time and the correlation between them. The TOT and charge are related and can be fitted by some empirical formula. The charge measurement resolution by TOT is given and this will help the design of TOF electronics. 相似文献