Observation of E×B Flow Velocity Profile Change Using Doppler Reflectometry in HL-2A

A broadband, O-mode sweeping Doppler reflectometry designed for measuring plasma E×B flow velocity profiles is operated in HL-2A. The main feature of the Doppler reflectometry is its capability to be tuned to any selected frequency in total waveband from 26-40 GHz. This property enables us to probe several plasma layers within a short time interval during a discharge, permitting the characterization of the radial distribution of plasma fluctuations. The system allows us to extract important information about the velocity change layer, namely its spatial localization. In purely Ohmic discharge a change of the E×B flow velocity profiles has been observed in the region for 28 〈 r 〈 30cm if only the line average density exceeds 2.2×10^19 m^-3. The density gradient change is measured in the same region, too.     

Theoretical Computation for Non-Equilibrium Air Plasma Electrical Conductivity at Atmospheric Pressure

Based on the Chapman-Enskog theory, we calculate the electrical conductivity of non-equilibrium air plasma in the two-temperature model. We consider different degrees of non-equilibrium, which is defined by the ratio of electronic temperature to heavy particles temperature. The method of computing the composition of air plasma is demonstrated. After calculating the electrical conductivity from electron temperature 1000 K to 15000K, the present result is compared with Murphy＇s study [Plasma Chem. Plasma Process 15 （1994） 279] for equilibrium case. All the calculation is completed at atmospheric pressure. The present results may have potential applications in numerical calculation of non-equilibrium air plasma.     

Driven transverse shear waves in a strongly coupled dusty plasma

The linear dispersion properties of transverse shear waves in a strongly coupled dusty plasma are experimentally studied in a DC discharge device by exciting them in a controlled manner with a variable frequency external source. The dusty plasma is maintained in the strongly coupled fluid regime with (1<Γ?Γc) where Γ is the Coulomb coupling parameter and Γc is the crystallization limit. A dispersion relation for the transverse waves is experimentally obtained over a frequency range of 0.1 Hz to 2 Hz and found to show good agreement with viscoelastic theoretical results.     

Simulations of anomalous ion diffusion in experimentally measured turbulent potential

The diffusion of plasma impurities in tokamak-edge-plasma turbulence is investigated numerically. The time-dependent potential governing particle motion was measured by 2D array of 8×8 Langmuir probes in edge region of CASTOR tokamak. The diffusion of particles is found to be classical in the radial direction, but it can be of an anomalous Lévy-walk type in the poloidal direction. The diffusion is found to be dependent on the ratio of particles’ mass and charge. When this ratio grows, the diffusion coefficient in radial direction grows as well, whereas poloidal diffusion coefficient drops down. Moreover, movement of particles in the time-frozen snapshot of this potential is investigated showing that also the time-independent potential is much more favorable for the particle diffusion in poloidal direction than in radial one. In the case of single ionized carbon ions the poloidal diffusion in time-independent potential transits to the Lévy-walk type for temperatures greater than 25 eV, for radial diffusion Lévy-walk was not observed even for 500 eV.     

Numerical Simulation of Plasma Antenna with FDTD Method

We adopt cylindrical-coordinate FDTD algorithm to simulate and analyse a 0.4-m-long column configuration plasma antenna. FDTD method is useful for solving electromagnetic problems, especially when wave characteristics and plasma properties are self-consistently related to each other. Focus on the frequency from 75 MHz to 400 MHz, the input impedance and radiation efficiency of plasma antennas are computed. Numerical results show that, different from copper antenna, the chaxacteristics of plasma antenna vary simultaneously with plasma frequency and collision frequency. The property can be used to construct dynamically reconfigurable antenna. The investigation is meaningful and instructional for the optimization of plasma antenna design.     

Plasma and surface modeling of the deposition of hydrogenated carbon films from low-pressure methane plasmas

The elementary mechanisms are described which determine the plasma and surface processes during the plasma-enhanced chemical vapour deposition of hydrogenated carbon films from methane. Corresponding model calculations are reviewed and critically discussed in comparison to experimental results. A realistic modeling requires the simultaneous and self-consistent treatment of plasma and surface effects. Several experimental data sets on plasma parameters and the growth and the composition of the films have been reproduced successfully. However, a broader experimental data base is needed for more critical tests of the models. The reliability of the modeling, in particular of the surface effects, is still limited due to the poor availability of elementary data.     

Improved gain for the Ar 2 * excimer laser at 126 nm

Argon was excited by intense electron beam pumping. The optical gain obtainable in Ar ₂ ^2* at 126 nm was investigated as a function of gas pressure and pumping density. The gas pressure necessary to achieve a gain of 10%/cm is reduced from 3.2 to 1.0 MPa if the gas is cooled at 170 K. The effect is partly due to reduced absorption by the removal of impurities. The results allow one a new approach to construct high-power lasers in the vacuum ultraviolet below 150 nm.     

Experimental observation of strong coupling effects on the dispersion of dust acoustic waves in a plasma

The dispersion properties of low frequency dust acoustic waves in the strong coupling regime are investigated experimentally in an argon plasma embedded with a mixture of kaolin and MnO₂ dust particles. The neutral pressure is varied over a wide range to change the collisional properties of the dusty plasma. In the low collisional regime the turnover of the dispersion curve at higher wave numbers and the resultant region of ∂ω/∂k<0$\partial \omega /\partial k<0$ are identified as signatures of dust–dust correlations. In the high collisional regime dust neutral collisions produce a similar effect and prevent an unambiguous identification of strong coupling effects.     

Growth of electron energies with ion beam injection in a double plasma device

This paper reports about the observed energy growth of both high and low energetic electron species in the target plasma region with the increase in plasma potential in the source region of a double plasma device. This situation can be correlated to the injection of an ion beam from source to target plasma region. Plasma is solely produced in the source region and a low-density diffuse plasma is generated in the target region by local ionization between the neutral gas and the high energetic electrons coming from the source region. The growth of electron energy is accompanied by a decrease in diffuse plasma density. It is observed that although energy of high energetic group increases with the injected beam energy, the diffuse plasma density falls due to their decreasing population.     

Propagation of Ion-Acoustic Wave in an Inhomogeneous Dusty Plasma with. Dust Charge Fluctuation

The propagation of dust ion-acoustic wave in an inhomogeneous dusty plasma is studied by taking the dust charge fluctuation and collisions into account. It is shown that the dust charge fluctuation brings a phase shift to the wave. Furthermore, because of the presence of dust charge fluctuation, a new damping term rises, which makes the damping more sharply.     

Low ion velocity slowing down in a strongly magnetized plasma target

Ion projectile stopping at velocity smaller than target electron thermal velocity in a strong magnetic field, is investigated within a novel diffusion formulation (Dufty-Berkovsky), based on Green-Kubo integrands evaluated in magnetized one component plasma models, respectively framed on target ions and electrons. Analytic expressions are reported for slowing down orthogonal and parallel to an arbitrary large magnetic field, which are free from the usual uncertainties plaguing the standard perturbative derivations.     

Enhanced production of fast multi-charged ions from plasmas formed at cleaned surface by femtosecond laser pulse

We present atomic, energy, and charge spectra of ions accelerated at the front surface of a silicon target irradiated by a high-contrast femtosecond laser pulse with an intensity of 3×10¹⁶ W/cm², which is delayed with respect to a cleaning nanosecond laser pulse of 3-J/cm² energy density. A tremendous increase in the number of fast silicon ions and a significant growth of their maximum charge in the case of the cleaned target from 5+ to 12+ have been observed. The main specific features of the atomic, energy, and charge spectra have been analyzed by means of one-dimensional hydrodynamic transient-ionization modeling. It is shown that fast highly charged silicon ions emerge from the hot plasma layer with a density a few times less than the solid one, and their charge distribution is not deteriorated during plasma expansion.This revised version was published online in August 2005 with a corrected cover date.     

Influence of radial electric field on trajectories of plug potential bounce ion in the tandem mirror

Bouncing ions between the plug potentials play an important role in improvement of the axial confinement in the tandem mirror. We examined the influence of the radial electric field on the trajectories of the ions passed through the anchor cell with nonaxisymmetric magnetic configuration on the assumption that the shape of the magnetic flux tube was shifted from the shape of the equipotential surface of the plasma at the mirror throats of the anchor cells. The discrepancy between the shapes enhanced the radial drift of the bounce ion. Radial potential profile of the core plasma was controlled by adjustment of the radially separated endplate potentials, and it was found that the flattened radial potential profile was effective for the decrease of the radial drift. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreux, Switzerland, June 23–24, 2002.     

About bursty behaviour, coherent structures, wide scrape-off layer and large parallel flows in the edge of the Tore Supra tokamak

We present the measurements of plasma characteristics in the scrape-off layer (SOL) of the Tore Supra tokamak performed by means of reciprocating Langmuir probe. The probe is inserted into the machine from top. As the radial distance from last closed flux surface (LCFS) increases, ion saturation current exhibits stronger bursty character and its probability density function becomes increasingly skewed towards positive values. At the same time, burst duration and inter-burst time increase dramatically. We explain this phenomenon by radial propagation and dynamics of the ensemble of coherent turbulent structures of different size. The results of two-dimensional fluid modelling based of flux-driven interchange instability mechanism are in excellent agreement with experimental results. We obtained clear experimental evidence that most of the coherent structures are formed in poloidally localized region of the SOL around the outboard midplane. If the probe is magnetically connected to this region, the SOL is very wide and we detect bursty behaviour in the far SOL. On the other hand, if the probe is not magnetically connected to the outboard midplane region (magnetic field lines are intercepted by the outboard limiter), then the SOL is very thin and bursty behaviour is much less prominent. Detection of bursty behaviour in the far SOL is correlated with existence of wide SOL pointing on important role of bursty transport by means of coherent turbulent structures in establishing the width of the SOL in tokamaks. The measurements of parallel flow in the SOL shows that plasma particle radial flux coming from confinement region to the SOL is mostly poloidally localized around the outboard midplane. Our estimations show that more than 80% of plasma particle radial flux is coming from confinement region to the SOL in poloidally localized region — approximately ±15° — around the outboard midplane. Presented at the Workshop “Electric Fields, Structures and Relaxation in Edge Plasmas”, Roma, Italy, June 26–27, 2006.     

Electromagnetic envelope solitons in magnetized plasma

A multiple scales technique is employed to solve the fluid-Maxwell equations describing a weakly nonlinear circularly polarized electromagnetic pulse in magnetized plasma. A nonlinear Schrödinger-type (NLS) equation is shown to govern the amplitude of the vector potential. The conditions for modulational instability and for the existence of various types of localized envelope modes are investigated in terms of relevant parameters. Right-hand circularly polarized (RCP) waves are shown to be modulationally unstable regardless of the value of the ambient magnetic field and propagate as bright-type solitons. The same is true for left-hand circularly polarized (LCP) waves in a weakly to moderately magnetized plasma. In other parameter regions, LCP waves are stable in strongly magnetized plasmas and may propagate as dark-type solitons (electric field holes). The evolution of envelope solitons is analyzed numerically, and it is shown that solitons propagate in magnetized plasma without any essential change in amplitude and shape.     

Spin damping correction to electrostatic modes in kinetic plasma theory

The effect of spin of particles is studied using a semi-classical kinetic theory for a magnetized plasma. No other quantum effects are included. We focus in the simple damping effects for the electrostatic wave modes. Besides Landau damping, we show that spin produces two new different effects of damping or instability which are proportional to ?. These corrections depend on the electromagnetic part of the wave that is coupled with the spin vector.     

An adaptive line-by-line—statistical model for fast and accurate spectral simulations in low-pressure plasmas

An adaptive grid method is proposed for the simulation of low-pressure plasma radiation. The method relies on two complementary approaches which significantly reduce calculation times and the size of the obtained grids: Weak lines are calculated as a so-called “pseudo-continuum”, hence reducing the number of calculated lines, and a numerical algorithm has been developed for accurately calculating Voigt lineshapes using a minimum number of points. The method is fully user-parametric, allowing the choice of privileging calculation efficiency, or alternatively privileging the accuracy of the computed spectra. Sample radiative transfer calculations are presented, which show the efficiency of the method, also providing some guidelines on how to define lineshape calculation parameters, depending on the problem to be solved.     

Study of charge distribution in a dust beam using a Faraday cup

After getting charged in plasma, dust grains in a dust beam are scanned by a Faraday cup and electrometer. At different operating conditions, including a dc field, and analysis of the dust current profile, dust charge distribution is studied and information on the nature of the nonuniform distribution obtained.     

Spectroscopic studies of laser-produced plasmas formed in CO and CO2 using 193, 266, 355, 532 and 1064 nm laser radiation

The wavelength dependence of laser-produced breakdown in air, CO and CO₂ has been studied using the four Nd:YAG harmonics (266 nm, 355 nm, 532 nm and 1064 nm) and the ArF-excimer laser (193 nm). Breakdown thresholds at these wavelengths are reported for air, CO and CO₂. A significant reduction in the breakdown thresholds for both CO and CO₂ is apparent when comparing 193 nm with the four Nd:YAG harmonics. This reduction is attributed to the resonance-enhanced two-photon ionization of metastable carbon atoms generated in the laser focus at the ArF-laser wavelength. In addition to reporting breakdown thresholds, the laser-produced plasmas in CO and CO₂ are characterized in terms of plasma temperatures and electron densities which are measured by time-resolved emission spectroscopy. Electron densities range from 9 × 10¹⁷ cm^–3 to 1 × 10₁₇ cm^–3. Excitation temperatures range from 22 000 K at 0.2 µs to 11 000 K at 2 µs. Ionization temperatures range from 22 000 K at 0.1 µs to 16 000 K at 2 µs. Evidence is presented to indicate that, like ArF-laser-produced plasmas, Nd:YAG-laser-produced plasmas formed in CO and CO₂ are in or near a state of Local Thermodynamic Equilibrium (LTE) soon after their formation.     

Guiding of an electromagnetic pulse in a plasma immersed in combined wiggler and axial magnetic fields

We present a new plasma-based method of guiding an electromagnetic pulse. The scheme consists of an inhomogeneous magnetic field and a uniform density plasma, in contrast to existing schemes that rely on transverse plasma density gradients but need not be magnetized. The refractive index of a magnetized plasma depends on the strength and direction of the magnetic field as well as the plasma density. A guiding channel is formed by using field inhomogeneity to generate the desired transverse profile of the index of refraction. The concept is analyzed with an envelope equation and, for the specific example of a wiggler magnetic field, with a two-dimension particle-in-cell simulation. A simplified model of this scheme as producing a magnetic wall in analogy to metallic waveguides is presented, for which corresponding approximate relations for the guided mode axial wavelength and radius are derived as functions of the plasma and magnetic field parameter. These are seen to be in good agreement with particle-in-cell simulation results. Since the desired inhomogeneity of the refractive index can be made easily when the electromagnetic wave frequency is close to the cyclotron frequency, this guiding scheme is most readily applied in the microwave regime.