水合作用与 pH 调控两性离子聚合物刷的相变行为

本文基于Flory-Huggins理论,建立理论模型研究水合作用与pH调控两性离子聚合物(ZP)刷的相变行为.理论模型考虑ZP的水合作用,以及ZP刷体系中的静电作用.研究发现,在不同pH条件下,ZP刷的体积分数随着水合作的减弱而的增加.随着pH的变化,ZP刷构象随着水合性转变行为明显改变,这是由于pH调控ZP链单体带有过多的净电荷(正电荷或负电荷),致使ZP链内出现静电排斥导致ZP刷溶胀.另外,当ZP链单体呈现过多的净电荷,会在很大程度上决定ZP刷体系静电势,影响ZP刷的相变行为.通过考察体系自由能,我们还发现,ZP刷体系自由能呈现了极大值,随着pH值的变化,自由能呈现的极大值随之改变,由此表明了体系的不稳定性,进而导致ZP刷体系发生相变.     

蓝绿光敏感的非水溶性光致聚合物特性研究

报导了一种新型蓝绿光敏感的非水溶性光致聚合物材料,这种材料以聚醋酸乙烯酯为成膜物,9-乙烯基咔唑(NVC),甲基丙烯酸2-苯氧乙脂(POEA)和双季戊四醇五丙烯酸酯为单体,Dye3和Dye4为光敏剂,邻氯代六芳基双咪唑(O-CL-HABI)为共引发剂.本材料能同时对蓝光和绿光敏感,用蓝光和绿光分别或同时对该材料曝光,可得到清晰图像.测得的两种衍射效率分别不低于80%.     

制备腈菌唑分子印迹聚合物前功能单体选择研究

为制备腈菌唑(M)分子印迹聚合物,建立了选择合适的功能单体以及功能单体添加量的方法。利用紫外光谱法研究α-甲基丙烯酸(MAA)、丙烯酰胺(AM)与M作用形式、作用强度、最佳浓度比和形成的结合位点数。结果表明,M与两种功能单体都会形成氢键;M的三唑环共轭双键的π电子吸收能量跃迁到π*共轭反键轨道,氢键的形成会使π→π*的吸收带发生迁移,最大吸收波长随着体系功能单体浓度增加而发生红移。M与两种功能单体最佳浓度配比分别为:M∶MAA=1∶4和M∶AM=1∶2。M与两种功能单体都具有结合能力,且结合力较强。采用AM为功能单体合成的分子印迹聚合物对M具有更好的稳定性和特异识别能力。     

双波长敏感的非水溶性光致聚合物存储特性研究

研究了一种新型的对红光和蓝光敏感的非水溶性光致聚合物材料的全息存储特性。该聚合材料由复合单体、复合光敏剂、复合引发剂、链转移剂及成膜物等成分组成,它具有防潮、后处理简单、分辨率高及耐高温等特点,对红、蓝光2种衍射效率均不低于75%,灵敏度为(45～65)mJ/cm2。对该材料先后进行了双波长复用存储实验和角度复用存储实验,当用红光或蓝光再现时再现图像清晰可见,相邻2副图像之间无明显干扰,说明该材料具有良好的存储性能,适合作高密度数字全息存储的记录材料,可用作光通信中的波分复用器及其他光学元件。     

一种全可见光敏感的光致聚合物全息特性研究

制备了一种对整个可见光波段都敏感的光全息存储材料,并研究了该材料的透过率、衍射效率、灵敏度等全息特性.用He-Ne激光器633 nm和Ar+ 激光器514 nm,488 nm,476 nm四种波长的光曝光,材料的饱和衍射效率最大为66%,最小为48%;最高灵敏度为8.06×10－3 cm2/mJ.最高折射率调制度为4.22×10－4.用多波长存储时,不同波长的光可存储多幅全息图,且再现图像清晰.结果表明,该材料是较好的高密度数字全息存储材料.     

光纤pH传感器

本文介绍了光纤pH传感器的工作原理以及已开发出的有代表性的光纤pH传感器,并进行了总结讨论。     

新型绿光敏感光致聚合物高密度全息存储特性

用实验方法研究了一种新合成的绿光敏感光致聚合物的高密度全息存储性质.结果表明该种光致聚合物具有较高的衍射效率、大的动态范围和折射率调制度,适合做高密度数字全息存储的记录材料,但材料的灵敏度需要提高,同时读出过程必须考虑曝光过程所导致的布拉格偏移;利用角度复用技术在样品的同一位置记录了20个数字化数据信息页,存储密度达到0.125GBcm3,平均误码率达到5.15×10 关键词： 光致聚合物 高密度数字全息存储 布拉格偏移     

双波长敏感的光致聚合物全息存储材料

介绍了一种以聚乙烯醇为粘结剂,丙烯酰胺和亚甲基双丙烯酰胺作为单体,赤藓红和亚甲基蓝作为光引发剂,三乙醇胺作为共引发剂的光致聚合物材料。材料能同时对红光和绿光敏感,用红光和绿光分别对材料曝光,测得的两种衍射效率分别不低于30％,灵敏度不低于25cm^2／J。该材料对红光的最大响应空间频率为2274 lp／mm,相应的衍射效率为27．73％,响应范围为1600∽2800lp／mm;对绿光的最大响应空间频率为2350 lp／mm．相应的衍射效率为25、72％,响应范围为1700∽3000 lp／mm。在材料的同一点上进行红光和绿光的波长复用全息存储,当用红光或绿光再现时单幅图像清晰,信噪比高,两幅图像之间无任何干扰,该材料适合双波长全息存储。     

功能聚合物：从薄膜器件到纳米器件

文章简要回顾了功能聚合物的发现和发展历程,着重介绍了其在发光二极管、太阳能电池、场效应晶体管、传感器件、纳米材料与器件中的应用.     

一种基于离子对技术的pH传感膜的研究

提出一种新型pH吸收传感膜。指示剂溴酚蓝与季铵盐阳离子以离子对的形式结合,均匀分布于增塑的PVC膜中。该传感膜测定pH的范围为4.0～6.0。对传感膜的制备方法及响应时间、可逆性、重现性等进行了研究。并应用于实际样品的测定,获得了比较好的结果。     

High Temperature Sensitive Fiber Bragg Grating with Polymer Jacket

1IntreduCionFtherBragggratingsareattractingconsiderableinterestf0rtheirextensiveapp1icatboin0PticalteIecommunicatiOnandfibersensor8yStems['~'J.A1argetuningrange0fBraggwavelengthis0ftenrequlredinmanyaPplicati0nsintuningdevicesf0rlasers0rfilterselementSf0rWDMsyStems.Inthecase0ffibergratingtemperaturesensors,alargethermalsensitivityisalsodesired.Theorigina1temPeraturesensitivity0fthefibergratingSisonlyabout0.01nrn/tnear155Onmbecauseofthesmallthermo-oPticandthermalexPansi0ncoefficientoffus…     

High Temperature Sensitive Fiber Bragg Grating with Polymer Jacket

It is demonstrated the high thermal sensitivity of fiber Bragg grating with polymer jacket. Twenty-three times enhanced sensitivity and over 41nm Bragg wavelength-tuning range have been obtained when the fiber grating is packaged with a special kind of polymer. This is the largest thermal sensitivity and largest temperature-tuned range ever demonstrated to our knowledge.     

Preparation of Thermal and pH Dually Sensitive Polyurethane Membranes and Their Properties

With c rystalline polycaprolactone diols (PCL) used as soft segments, and 1,4-butanediol (BDO), dimethylolpropionic acid (DMPA), and N-methyldiethanolamine (MDEA), respectively, used as different pH-sensitive components, three types of thermal and pH-sensitive polyurethanes (PUs) were prepared by using the block copolymerization technique and are referred to as PU(a), PU(b), and PU(c), correspondingly. Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and differential scanning calorimetry (DSC) were used to study the distinct functional groups of the PUs and their segmented structures. Their thermal and pH stimuli sensitivity were measured by water permeability (WP) and water swelling (WS) tests. Fourier transform infrared analysis demonstrated that the ?COOH and ?N(CH₃)? groups were successfully introduced into the PU(b) and PU(c), respectively, and these acid–base groups did not change the basic structure of their main chains. X-ray photoelectron spectroscopy analysis showed that the O and N concentration increased on the surface of PU(b) and PU(c), respectively. Differential scanning calorimetry analysis indicated that all three PUs showed phase-separated structures and similar phase-transition temperatures of the soft segments (defined as the switch temperature, T_s), which showed that the introduction of the acid–base functional groups did not much affect the phase-separated structures and crystallization of the soft segments. The WP study indicated that all PUs showed thermal intelligent responses, i.e., the WPs were correspondingly changeable with change of the temperature. In particular, when the temperature varied near the T_s, e.g., from T_s?10°C to T_s?+?10°C, the WPs changed markedly. In addition, due to PU(b) and PU(c) containing ?COOH and ?N(CH₃)? groups, respectively, they both showed a pH response in their WP and WS. When the pH changed from 4.0 to 5.5, the WP and WS of PU(b) were obviously changed. The same change also occurred for PU(c) in the pH range from 8.5 to 10.0. We thus conclude that the method utilized is an efficient way to prepare PUs that are dually responsive to both thermal and pH stimuli.     

Study of Salinity and pH Effects on Gelation Time of a Polymer Gel Using Central Composite Design Method

Experiments were conducted to investigate the main effects of salinity (NaCl) concentrations and pH factors and their interactions on the gelation time response of a polymer gel used in a water shutoff system in oil field reservoirs. Central composite design (CCD) was used to design experiments and a mathematical model building. The main advantage of CCD was to generate the quadratic mathematical model for the gelation time as functions of salinity and pH factors. Tests were limited and optimized by CCD points including low star (axial), low factorial, central, high factorial, and high star points. The evaluation of the data and the developed model were performed through the examination of graphical trend of residuals and a numerical approach. Analysis of variance (ANOVA) was used to estimate the amount of data variations from the model predictions. It was found that the model was significant at the 99% confidence against test data. The results showed that the gelation time was dependent more on pH than salinity. For low pH, the gelation time increased with increasing of the salinity, while for a high pH (>4) the relationship was inversed. The research shows that CCD can effectively be applied for the modeling of gelation time and finding an optimum condition to achieve maximum or minimum gelation time for different salinity and pH factors.     

Variable radio frequency proton-electron double-resonance imaging: application to pH mapping of aqueous samples

Proton-electron double-resonance imaging (PEDRI) offers rapid image data collection and high resolution for spatial distribution of paramagnetic probes. Recently we developed the concept of variable field (VF) PEDRI which enables extracting a functional map from a limited number of images acquired at pre-selected EPR excitation fields using specific paramagnetic probes (Khramtsov et al., J. Magn. Reson. 202 (2010) 267-273). In this work, we propose and evaluate a new modality of PEDRI-based functional imaging with enhanced temporal resolution which we term variable radio frequency (VRF) PEDRI. The approach allows for functional mapping (e.g., pH mapping) using specifically designed paramagnetic probes with high quality spatial resolution and short acquisition times. This approach uses a stationary magnetic field but different EPR RFs. The ratio of Overhauser enhancements measured at each pixel at two different excitation frequencies corresponding to the resonances of protonated and deprotonated forms of a pH-sensitive nitroxide is converted to a pH map using a corresponding calibration curve. Elimination of field cycling decreased the acquisition time by exclusion periods of ramping and stabilization of the magnetic field. Improved magnetic field homogeneity and stability allowed for the fast MRI acquisition modalities such as fast spin echo. In total, about 30-fold decrease in EPR irradiation time was achieved for VRF PEDRI (2.4s) compared with VF PEDRI (70s). This is particularly important for in vivo applications enabling one to overcome the limiting stability of paramagnetic probes and sample overheating by reducing RF power deposition.     

高聚物—富勒烯体系薄膜微微秒三倍频效应研究

采用５０ｐｓ的１．０６ｕｍ的基频光，对用物理喷束沉积方法制备的聚乙烯咔唑Ｐｏｌｙ－富勒烯组合薄膜进行三倍频信号测量。在ＰＶＫ／Ｃ６０分层膜与混合膜中观测到三倍频信号增强，考虑到两者之间的电荷转移效应，在分层膜中，把该三阶非线性增强归因于ＰＶＫ与富勒烯Ｃ６０之间的电荷转移所生成的载流子引起的电偶极矩和极化强度增强，在混合膜中，则是电荷转移所生成的络合物起主要作用。     

溶液中pH对蛋白质乳化能力影响的拉曼光谱研究

本工作采用 FT- Raman光谱仪对不同的 p H值的蛋白质水溶液多次扫描 ,采用酰胺 带的谱图作曲线拟合 ,并以子峰面积表征对应二级结构含量 ,得出二级结构的变化与蛋白质水溶液与乙酸丁酯混合后乳化能力变化的关系。结果表明 :蛋白质分子对 p H变化的敏感程度不一样。蛋白质分子结构的改变是引起蛋白质水溶液在有机溶液中乳化的一个重要因素