Wavelength blending with reduced speckle and improved color for laser projection

In this paper, a theoretical model was established to study speckle reduction using the wavelength blending technique with multiple lasers for the first time. An optimized power ratio of two lasers was then obtained using the theoretical model. A diode pumped solid state (DPSS) laser at 532 nm and a semiconductor laser diode (LD) at 520 nm were used to verify the simulated results. A speckle reduction system which utilizes wavelength blending was also proposed and demonstrated. Using wavelength blending, this system has a lower speckle as compared with one in which only one wavelength is used, and an improved green primary color (with respect to the Rec. 2020 standard) as compared with the one that only semiconductor LD is employed.     

Watt-level red-emitting diode lasers and modules for display applications

Red-emitting lasers for display applications require high output powers and a high visibility. We demonstrate diode lasers and modules in the red spectral range based on AlGaInP with optical output powers up to 1 W and a nearly diffraction limited beam. These high-luminance light sources based on tapered lasers are well suited for laser TVs and projectors for virtual reality simulators based on the flying spot technology. Additionally, we developed diode lasers with internal distributed Bragg reflector (DBR) surface gratings. These DBR tapered lasers and master-oscillator power-amplifiers based on DBR ridge-waveguide lasers and tapered amplifiers feature high power, single mode emission with coherence lengths up to several meters, which are suitable for the next-generation 3D displays based on holography.     

Analytical and experimental studies on the diode-pumped,simultaneously Q-switched and mode-locked c-cut Nd:GdVO<Subscript> 4</Subscript>/KTP green laser with LT-GaAs absorber

A diode-pumped passively Q-switched mode-locked (QML) intracavity frequency doubled c-cut Nd:GdVO₄/KTP green laser with a LT-GaAs saturable absorber is presented. More than 90% modulation depth for the mode-locked green pulses has been achieved. Using the hyperbolic secant function methods, a developed rate equation model for Q-switched and mode-locked lasers considering the Gaussian spatial distribution of the intracavity photon intensity, the influences of continuous pump rate, the upper state lifetime of the active medium, and the excited-state lifetime of the saturable absorber, was proposed. With this developed model, the theoretical results are in good agreement with the experimental results and the width of the mode-locked green pulse was estimated to be about 380 ps.     

Verification of speckle contrast measurement interrelation with observation distance

The speckle contrasts of two types of laser projectors were measured at various observation distances and observation lens pinhole diameters using a quantitative measurement technique. We found that the speckle contrast as a function of the observation numerical aperture varies with the projection architecture. In a full-frame projector, it is proportional to the numerical aperture, but it is proportional to its square root in a raster-scanned projector. The difference in speckle contrast as a function of the numerical aperture was analyzed based on Goodman’s speckle theory. The obtained results were found to be very useful and applicable for speckle evaluation and display qualifications in an arbitrary observer’s position.     

Speckle shearography using a multiband light source

Applications for optical metrology usually use lasers as light sources, because of the excellent spatial and temporal coherence of the emitted light. By comparison, the demands of speckle shearography concerning the coherence of the light source are low. This enables certain white-light sources to be an option.

In this paper, the feasibility of low coherence shearography is shown. For this purpose an experimental setup is designed, composed of a mercury arc lamp, a spatial filter and a Michelson interferometer. With respect to speckle shearography, important characteristics of the light source are described and the mercury arc lamp is shown to be suitable. Finally, some experimental investigations of an object under load are presented.     

Polydispersed Powders (Nd3+:YVO4) for Ultra Efficient Random Lasers

Random lasers hold the potential for cheap, coherent light sources that can be miniaturized and molded into any shape with several other added benefits such as speckle‐free imaging; however, they require improvements specifically in terms of efficiency. This paper details for the first time a strategy for increasing the efficiency of a random laser that consists in using smaller particles, trapped between large particles to serve as absorption and gain centers whereas the large particles control mainly the light diffusion into the sample. Measurements of backscattering cone, sample absorption, reflection, and laser emission are used to determine the samples' transport mean free path, fill fractions, laser efficiency, and the average photon path lengths inside the scattering medium for backscattered pump photons. A record slope efficiency of 50% is reached by optimizing pump photon diffusion and absorption in a powder pellet composed by a polydispersed particle size distribution (smaller particles between bigger ones) from a grinded and sieved 1.33 mol% yttrium vanadate doped with neodymium crystal with mean particle size of 54 µ m.     

A compact free space quantum key distribution system capable of daylight operation

A free space quantum key distribution system has been demonstrated. Consideration has been given to factors such as field of view and spectral width, to cut down the deleterious effect from background light levels. Suitable optical sources such as lasers and RCLEDs have been investigated as well as optimal wavelength choices, always with a view to building a compact and robust system. The implementation of background reduction measures resulted in a system capable of operating in daylight conditions. An autonomous system was left running and generating shared key material continuously for over 7 days.     

Laser speckle reduction using motionless image conduits

We have demonstrated a speckle reduction method using motionless image conduits (MICs). Different experimental conditions by introducing the high-coherence HeNe laser and the low-coherence laser diode (LD) as the illumination light sources, by employing the straight MIC and the curved MIC as the speckle reduction components, and by recording speckle images without (objective speckle) and with (subjective speckle) the imaging lens mounted on the CCD camera are conducted, respectively. The most efficient speckle reduction condition is found by the combination of using the LD and the curved MIC, where the objective speckle contrast ratio is reduced from 0.7378 to 0.1725. Experimental results are discussed, and the causes for these speckle reduction efficiency changes are given.     

Mode-locking of diode laser-pumped solid-state lasers

Mode-locked diode-pumped solid state lasers have become important sources for efficient and reliable short pulse generation. We review techniques for active mode-locking of diode-pumped lasers, highlighting techniques which have produced much shorter pulse durations than previous technologies and extended operating repetition rates to the several gigahertz regime. To achieve even shorter pulse durations a series of nonlinear passive mode-locking techniques have been developed. Self-starting additive pulse mode-locking, resonant passive mode-locking and self-mode-locking of diode-pumped solid-state lasers are described.     

象平面散斑场相位差的统计性质

运用弱散射体产生的部分显现散斑场相位差自由标准偏差的近似表达式,计算和分析了由单会聚透镜成象产生的象平面部分显现高斯散斑场相位差的自由统计性质.