电脉冲对多晶La0.7Ca0.3MnO3比热的影响

对电脉冲诱导的不同电阻态下La_0.7Ca_0.3MnO₃样品的比热进行了研究.实验结果表明,电脉冲导致La_0.7Ca_0.3MnO₃样品比热随电阻状态发生可逆变化.比热随电阻状态的减小而减小.低温比热拟合及不同电阻状态下的比热差与温度关系说明,声子对比热的贡献不随电阻状态变化,磁性和载流子对比热的贡献是导致La_0.7Ca_0.3MnO₃样品比热变化的原因.电脉冲诱导O离子沿一维扩展性缺陷的电化学迁移,导致材料中局部区域的O离子浓度发生变化.O离子浓度的变化导致载流子浓度的变化,同时载流子浓度的变化将使得低温下磁性耦合强度发生变化,从而导致比热发生变化. 关键词： 0.7Ca_0.3MnO₃')" href="#">La_0.7Ca_0.3MnO₃ 比热 氧离子迁移     

沉积于MgO基片上的La0.7Ca0.3MnO3薄膜的应变弛豫和磁电阻特性

利用90°离轴射频磁控溅射方法将La_0.7Ca_0.3MnO₃(LCMO)沉积于(001)取向的MgO单晶基片上,薄膜厚度变化范围为5nm到200nm. 通过掠入射X射线衍射技术测量了LCMO/MgO薄膜的面内晶格常数, 结合常规X射线衍射研究了LCMO薄膜的晶格应变及其弛豫情况, 用四探针法测量了薄膜的磁电阻特性.结果表明, LCMO/MgO薄膜均为(001)取向生长, 在厚度小于5nm时已经发生应变弛豫, 当薄膜厚度为100nm以上时, 薄膜的微应变接近于完全弛豫, 并表现出与块体材料类似的磁电阻特性, 具有较大的磁电阻和较高的磁电阻峰值温度.     

La0.3Sr0.7CrO3钙钛矿化合物高压合成和物性

 采用高压高温方法合成了单相的带宽调控型La_0.3Sr_0.7CrO₃ Mott化合物,对其晶体结构和磁学性质进行了研究。结果表明：La_0.3Sr_0.7CrO₃化合物具有立方钙钛矿晶体结构,温度在170 K以上其磁性为顺磁性,满足居里-外斯定律,温度低于20.7 K发生了自旋玻璃转变。     

Nd1-xSrxMnO3中掺杂浓度对电脉冲诱导电阻转变效应的影响

采用两线测量模式对固相烧结方法制备的Nd_1-xA_xMnO₃ (A= Ba, Ca, Sr,x= 0-0.9) 陶瓷样品电脉冲诱导电阻转变(EPIR)效应和I-V特性进行了测量. 结果表明, 与Nd_0.7Sr_0.3MnO₃一样, 相同浓度掺杂的Nd_0.7Ba_0.3MnO₃和Nd_0.7Ca_0.3MnO₃ 样品也能诱发稳定的室温EPIR效应. 进一步对Nd_1-xSr_xMnO₃系列样品的EPIR研究表明, 这种界面相关的EPIR效应与样品中电子或空穴掺杂浓度密切相关, 在半掺杂 (x= 0.5)附近, 样品与电极接触界面能诱发稳定的EPIR效应. 然而, 随掺杂浓度的进一步增大或降低, EPIR效应逐渐出现减弱、不明显到完全消失的过程. 产生这种现象的原因可能与锰氧化物中由于掺杂浓度差异所导致的界面缺陷在不同极性脉冲激励下重新分布而产生的内电场强弱有关.     

氧非正分La0.9Ba0.1MnO3-δ/SrTiO3:Nb p-n异质结的整流特性研究

利用脉冲激光沉积技术在掺Nb的SrTiO₃衬底上制备了氧非正分La_0.9Ba_0.1MnO_3-δ/SrTiO₃:Nb p-n异质结.在20—300K这一较宽的温度范围内获得了光滑的整流曲线.整流实验表明：该p-n异质结的正向扩散电压V_D随着温度升高在薄膜金属—绝缘转变温度附近出现极大值，表现出与氧正分La_0.9Ba_0.     

n型透明导电薄膜CdIn2O4电学性质的研究和大面积制备的最佳条件

在Ar+O2₂气氛中，采用射频反应溅射Cd-In靶制备CdIn2₂O4₄ 薄膜.制得的薄膜经x射线衍射（XRD）检测为CdIn2₂O4₄和CdO相组成的多晶.从理论上分析了热 处理前后氧空位、掺杂点缺陷和富氧电子陷阱在影响膜的载流子浓度和电子散射中所起的重要作用.同时，对样品 进行Hall效应、Seebeck效应测试并得出不同载流子浓度下的迁移率、有效质量、弛豫时间以及它们之间的相互关系，特别强调     

Sr2CeO4电荷迁移发光的光谱结构规律研究

利用高温固相反应法分别合成了不同物相形成机理的Sr₂CeO₄，Sr ₂CeO₄∶Ca ²⁺和Sr₂CeO₄∶Ba²⁺样品，并对其光谱特性进行 了研究.结果发现，对于由SrO和CeO₂直接反应生成的Sr₂CeO₄(Ⅰ)，激发主峰位于256nm 左右；而对于SrCeO₃和SrO反应生成的Sr₂CeO₄(Ⅱ)，激发主峰位于279nm左右.在Sr₂CeO₄(Ⅰ)中掺入Ca²⁺，其激发光谱随着Ca²⁺离子浓度的增加逐渐接近于Sr₂CeO_{4(Ⅱ)的激发光谱.激发主峰带应属于CeO6八面体终端Ce⁴⁺—O^2-键的电荷迁移 带.对于激发光谱中340nm左右的弱激发峰，其峰值波长不受形成机理及Ca²⁺掺杂的影响，只是其强度 随着 激发主峰的红移而增加，它可能属于CeO6八面体平面上Ce⁴⁺—O2-键的电荷 迁移带.形成机理及Ca²⁺掺杂对发射光谱没有影响.Ca²⁺在Sr 2CeO 4(Ⅱ)与Ba²⁺在Sr2CeO4(Ⅰ)和(Ⅱ)中均难 于替代Sr²⁺的位置.}     

氧化还原可逆Nb2TiO7复合阴极电解池高温水蒸气电解研究

系统地研究Nb₂TiO₇与Nb_1.33Ti_0.67O₄材料相互转变的氧化还原循环可逆性能,同时研究Nb2TiO7和Nb_1.33Ti_0.67O₄样品随温度和氧分压变化的电导率,并与复合电极对称电池和电解池的电化学性能相关联. 在830 oC下,对Nb_1.33Ti_0.67O₄复合电极电解池进行水蒸气的电解研究测试. 电流电压曲线和电解池短期性能测试表明在低电压下主要为电极的还原和活化过程;而在高电压下主要为水蒸气的电解. 当3%H₂O/Ar/4%H_{2气体通入阴极时电解池水蒸气电解的法拉第效率为98.9%;而当通入气体转换为3%H2O/Ar时效率为89%.}     

利用氧化辅助气固法生长高磁性的α-Fe2O3和Fe3O4纳米线

探讨生长α-Fe₂O₃和Fe₃O₄纳米线的一个可控制的合成过程. 在研究中发现,高磁性的α-Fe₂O₃纳米线已经成功地利用氧化辅助气固法结晶生成于Fe_0.5Ni_0.5合金基板上;若基板事先浸泡于草酸溶液中,随草酸浓度的增加,所生长的纳米线晶相会逐转变为Fe₃O₄,当草酸浓度达到0.75 mol/L时,所生长的纳米线几乎全部转变成Fe₃O₄晶相. 此外,实验结果也显示所生长的纳米线长度及直径会随着气固过程中的温度上升而增加,生长密度则会随着气固过程中的流量加大而上升. 此过程所提出的合成程序可在2 h內完成.     

Electronic Transport and Magnetic Properties in Ferroelectric-Ferromagnetic Composites La5/8Ca3/8MnO3:ErMnO3

系统研究了xLa_5/8Ca_3/8MnO₃:ErMnO₃:(1-x)ErMnO₃(x=0、0.2、0.4、0.5、0.6、0.8、1)铁电铁磁复合材料的晶体结构和低温下的电磁输运性质.X光衍射结果表明金属铁磁相La_5/8Ca_3/8MnO₃和绝缘铁电相ErMnO₃由于晶体结构上的巨大差异几乎完全不相溶．电阻率随x的增大而降低,其导电特性可用经典的渗流理论来解释．当x>xc时,样品电阻特性由La_5/8Ca_3/8MnO₃主导,电阻温度曲线会出现金属绝缘体转变．磁性测试表明,由于xLa_5/8Ca_3/8MnO₃的掺入,复合材料的磁性相比单相ErMnO₃得到加强．从电磁性质综合分析认为这种复合材料是一种新的多铁性材料,相比单相多铁性材料ErMnO₃,它具有更强的磁性和更广的使用温度范围．     

Tb4O7掺杂的WO3陶瓷的高温热电现象

采用传统的固相烧结技术，制备Tb₄O₇掺杂的WO₃陶瓷. 测量了其高温热电行为，发现样品升温和降温时相变分别出现在350℃和270℃，有80℃的热滞.并且样品在500℃的恒定温度下有稳定的电能输出，这种现象用现有的温差电效应和热(释)电效应理论都不能解释.这是一种新的热电效应，利用它有可能找到热能—电能转换的新途径. 关键词： 3陶瓷')" href="#">WO₃陶瓷 热电转换 相变 热释电     

Magnetic properties and magnetocaloric effects in Tb6Co1.67Si3 compound

Magnetic properties and magnetocaloric effects of Tb₆Co_1.67Si₃ have been investigated by magnetization measurement. This compound is of a hexagonal Ce$_{6}$Ni$_{2}$Si$_{3}$-type structure with a saturation magnetization of 187\,emu/g at 5\,K and a reversible second-order magnetic transition at Curie temperature $T_{\rm C} = 186$\,K. A magnetic entropy change $\Delta S = 7$\,J\,$\cdot$\,kg$^{-1}$\,$\cdot$\,K$^{-1}$ is observed for a magnetic field change from 0 to 5\,T. A large value of refrigerant capacity (RC) is found to be 330\,J/kg for fields ranging from 0 to 5\,T. The large RC, the reversible magnetization around $T_{\rm C}$ and the easy fabrication make the Tb₆Co_1.67Si₃ compound a suitable candidate for magnetic refrigerants in a corresponding temperature range.     

Magnetocaloric effect in Gd6Co1.67Si3 compound with a second-order phase transition

The magnetic properties and the magnetic entropy change AS have been investigated for Gd6Co1.67Si3 compounds with a second-order phase transition. The saturation moment at 5 K and the Curie temperature TC are 38.1μB and 298 K, respectively. The AS originates from a reversible second-order magnetic transition around TC and its value reaches 5.2 J/kg.K for a magnetic field change from 0 to 5T. The refrigerant capacity （RC） of Gd6Co1.67Si3 are calculated by using the methods given in Refs.[12] and [21], respectively, for a field change of 0 5T and its values are 310 and 440 J/kg, which is larger than those of some magnetocaloric materials with a first-order phase transition.     

DC current effect on the magnetic phase and transport properties of polycrystalline La0.7Ca0.3MnO3

The influence of DC current on the resistivity and phase transition of polycrystalline La_0.7Ca_0.3MnO₃ has been investigated. The specific heat measurement found that charge carriers and ferromagnetic spin-wave contributions were changed after applied DC current. Applying high electric fields leads to the formation of ferromagnetic regions. The resistivity drops abruptly once the percolating current path is established. As current through the sample disappears, the larger ferromagnetic (FM) clusters, however, remain and are frozen in giving a measurable contribution to the specific heat of the system. The larger clusters should give rise to the value of spin-wave stiffness constant (D), as it is expected to increase the strength of the ferromagnetic coupling. The metallic ferromagnetic regions would make the charge carrier delocalization and attribute to specific heat linear term γ.     

Effects of high-pressure heat treatment on the solid-state phase transformation and microstructures of Cu61.13Zn33.94Al4.93 alloys

The phase transformation activation energy of the Cu61.13Zn33.94Al4.93 alloys, which were treated at 4 GPa and 700℃ for 15 minutes, was calculated by means of differential scanning calorimetry curves obtained at various heating and cooling rates. Then, the effects of high-pressure heat treatments on the solid-state phase transformation and the microstructures of Cu61.13Zn33.94Al4.93 alloys were investigated. The results show that high-pressure heat treatments can refine the grains and can change the preferred orientation from (111) to (200) of α phase. Compared with the as-cast alloy, the sample with high-pressure heat treatment has finer grains, lower β′→β and β→β' transformation temperature and activation energy. Furthermore, we found that high cooling rate favours the formation of fine needle-like α phase in the range of 5-20℃/min.     

Resistive switching in ceramic multiferroic Bi0.9Ca0.1FeO3

We report resistive switching effects in polycrystalline samples of the multiferroic Bi_0.9Ca_0.1FeO₃ with silver electrodes. Mössbauer spectroscopy shows that upon Ca-doping the Fe remains in a 3+ valence state, suggesting charge compensation through the creation of large amounts of oxygen vacancies. Electrical characterization shows that the oxide/metal resistance can be switched between high and low resistance states by applying voltage pulses. This process was shown to be forming free and a strong relaxation after switching was found. We rationalize our results by considering oxygen vacancies migration to and from the metal–oxide interface, resulting in variations of the Schottky potential barrier height that modulate the interface resistance.     

哈斯勒合金Ni50Mn35In15的马氏体相变及其磁热效应

利用电弧炉熔炼了Ni₅₀Mn₃₅In₁₅多晶样品，根据磁性测量对其马氏体相变和磁热效应进行了系统研究.结果表明，随着温度的降低，样品在室温附近先后发生了二级磁相变与一级结构相变特征的马氏体相变，导致它的磁化强度产生突变. 同时通过低温下的磁滞回线的测量发现样品存在交换偏置行为，表明低温下马氏体相中铁磁和反铁磁共存. 此外，根据Maxwell方程，计算了样品在马氏体相变温度附近的磁熵变，当温度为309K，磁场改变5 T时，样品的磁熵变可达22.3J/kgK. 关键词： 哈斯勒合金 50Mn₃₅In₁₅')" href="#">Ni₅₀Mn₃₅In₁₅ 马氏体相变 磁热效应     

Magnetic transition and large reversible magnetocaloric effect in EuCu1.75P2 compound

The magnetocaloric effect(MCE) in EuCu1.75P2 compound is studied by the magnetization and heat capacity measurements.Magnetization and modified Arrott plots indicate that the compound undergoes a second-order phase transition at TC ～ 51 K.A large reversible MCE is observed around TC.The values of maximum magnetic entropy change(-△SxMma) reach 5.6 J·kg-1·K-1 and 13.3 J·kg-1·K-1 for the field change of 2 T and 7 T,respectively,with no obvious hysteresis loss in the vicinity of Curie temperature.The corresponding maximum adiabatic temperature changes(△Tadmax) are evaluated to be 2.1 K and 5.0 K.The magnetic transition and the origin of large MCE in EuCu1.75P2 are also discussed.     

Influence of overcoat on laser-induced damage threshold of 532 and 800 nm TiO2/SiO2 high reflectors

TiO₂/SiO₂ high reflectors with and without a SiO₂ overcoat are deposited by electron-beam evaporation. The film properties are characterized by visible spectrometry measures, structure analysis, roughness and laser-induced damage threshold (LIDT) tests, surface defects and damage morphology observation. The effects of overcoats on LIDT at 532 nm, 8 ns and 800 nm, 220 ps laser pulses are investigated. The relations between film structure, roughness, surface defects, electric field and LIDT are discussed. It is found that overcoats can increase the LIDT at these two laser wavelengths. The reduction of peak temperature, the low defects density and roughness, the low intrinsic absorption of SiO₂ and its amorphous structure are the main reasons for LIDT improvement by overcoats.