Sequential phenolic acid co-pigmentation pretreatment and contact ultrasound-assisted air drying to intensify blackberry drying and enhance anthocyanin retention: A study on mass transfer and phenolic distribution

In this work, the spraying of ethanol solution containing phenolic acid (ferulic acid or caffeic acid) was performed before subjecting to contact ultrasound-assisted air drying of blackberry. The mass transfer modeling results revealed that sonication intensified both internal water diffusion and external water exchange during drying, and ethanol pretreatment enhanced the effective diffusivity of water. Compared with air drying alone, the drying time for sequential ferulic acid pretreatment and drying with sonication was shortened by 89.2%. Owing to the co-pigmentation between phenolic acid and anthocyanins, the retention of anthocyanins was significantly enhanced after dehydration. At the end of drying, the total anthocyanin contents in the ultrasound-dried samples pretreated with ferulic acid and caffeic acid were 25.3% and 10.5% higher than the sonicated samples without pretreatments, respectively. Furthermore, drying simultaneously with sonication promoted the preservation of non-anthocyaninic soluble phenolics including catechin, phloretic acid, rutin in blackberry compared to air drying alone. Besides, bound phenolics in blackberry were less influences by the applied dehydration treatments. This study demonstrates that the combination of phenolic acid co-pigmentation pretreatment and ultrasound drying could be a promising method to protect anthocyanin pigments during dehydration of berry fruits.     

Enhancement of convective drying by application of airborne ultrasound – A response surface approach

Drying is one of the oldest and most commonly used processes in the food manufacturing industry. The conventional way of drying is by forced convection at elevated temperatures. However, this process step often requires a very long treatment time, is highly energy consuming and detrimental to the product quality. Therefore, an investigation of whether the drying time and temperature can be reduced with the assistance of an airborne ultrasound intervention is of interest.Previous studies have shown that contact ultrasound can accelerate the drying process. It is assumed that mechanical vibrations, creating micro channels in the food matrix or keeping these channels from collapsing upon drying, are responsible for the faster water removal. In food samples, due to their natural origin, drying is also influenced by fluctuations in tissue structure, varying between different trials. For this reason, a model food system with thermo-physical properties and composition (water, cellulose, starch, fructose) similar to those of plant-based foods has been used in this study.The main objective was, therefore, to investigate the influence of airborne ultrasound conditions on the drying behaviour of the model food. The impact of airborne ultrasound at various power levels, drying temperature, relative humidity of the drying air, and the air speed was analysed. To examine possible interactions between these parameters, the experiments were designed with a Response Surface Method using Minitab 16 Statistical Software (Minitab Inc., State College, PA, USA). In addition, a first attempt at improving the process conditions and performance for better suitability and applicability in industrial scale processing was undertaken by non-continuous/intermittent sonication.     

The impact of ultrasound and steam blanching pre-treatments on the drying kinetics,energy consumption and selected properties of parsley leaves

In current study the influence of ultrasound pre-treatment and drying conditions (microwave power, air temperature) was analysed by the means of drying kinetics, energy consumption and selected quality properties of dried parsley leaves. Ultrasound treatment (US) was compared with conventional treatment – steam blanching. In comparison to untreated material, ultrasound applied at 21 kHz, 12 W/g, contributed to significant reduction of the drying time up to 29.8%. Moreover, the energy expenditures were reduced maximally by 33.6% for parsley dried at 30 °C and 300 W. For this sample the colour retention was the highest, as well. In turn, steam treated parsley was dried maximally by 28.9% faster and thus specific energy consumption decreased to 72.0% of the value for intact leaves when 20 °C and 300 W were set. The influence of pre-drying treatment on the quality properties depended on the drying conditions. Pre-drying treatment (US, blanching) did not affect the lutein content significantly, whereas the most considerable increase of chlorophyll a and b resistance and their relative concentration (Chl a/b ratio) was achieved in US-treated leaves dried at 30 °C and 100 W. The utilisation of drying pre-treatment and dehydration parameters should be considered with respect to further utilisation of dried parsley leaves. Nonetheless, sonication is worth to be taken into account due to a significant reduction of energy expenditures and an improvement of resistance of bioactive components.     

Evaluation on the air-borne ultrasound-assisted hot air convection thin-layer drying performance of municipal sewage sludge

The thin-layer drying behavior of the municipal sewage sludge in a laboratory-scale hot air forced convective dryer assisted with air-borne ultrasound was investigated in between 70 and 130 °C hot air temperatures. The drying kinetics in the convective process alone were compared to that for ultrasound-assist process at three ultrasound powers (30, 90, 150 W). The average drying rates within whole drying temperature range at ultrasound powers of 30, 90 and 150 W increased by about 22.6%, 27.8% and 32.2% compared with the convective drying alone (without ultrasound). As the temperature increasing from 70 °C to 130 °C, there were maximum increasing ratios for the effective moisture diffusivities of the sewage sludge in both falling rate periods at ultrasonic power of 30 W in comparison with other two high powers. In between the ultrasound powers of 0 and 30 W, the effect of the power on the drying rate was significant, while its effect was not obvious over 30 W. Therefore, the low ultrasonic power can be just set in the drying process. The values of the apparent activation energy in the first falling rate period were down from 13.52 to 12.78 kJ mol⁻¹, and from 17.21 to 15.10 kJ mol⁻¹ for the second falling rate period with increasing the ultrasonic power from 30 to 150 W. The values of the apparent activation energy in two falling rate periods with the ultrasound-assist were less than that for the hot air convective drying alone.     

Drying characteristics and quality attributes of apple slices dried by a non-thermal ultrasonic contact drying method

Drying is one of the most prevalent methods to reduce water activity and preserve foods. However, it is also the most energy-intensive food processing unit operation. Although a number of drying methods have been proposed and tested for the purpose of achieving a time- and energy-efficient drying process, almost all current drying methods still rely on thermal energy to remove moisture from the product. In this study, a novel use of power ultrasound was explored for drying of apple slices without the application of heat. The non-thermal ultrasound contact drying (US-CD) was performed in the presence of an air stream (26–40 °C) flowing over product surface to remove mist or vapor produced by the ultrasound treatment. The effects of the non-thermal US-CD, hot-air drying (HAD), and freeze drying (FD) on the changes in rehydration ratio, pH, titratable acidity, water activity, color, glass transition temperature, texture, antioxidant capacity, total phenols, and microstructures of the samples were evaluated. The moisture content of the apple slices reached below 5% (w.b.) after 75–80 min of US-CD, which was about 45% less than that of the HAD method. The antioxidant capacity and total phenol contents of the US-CD samples were significantly higher than that of the AD samples. The non-thermal ultrasonic contact drying is a promising method which has the potential to significantly reduce drying time and improve product quality.     

Application of ultrasound technology in the drying of food products

This study presents a state-of-the-art overview on the application of ultrasound technology in the drying of food products, including the ultrasound pre-treatment and ultrasound assisted drying. The effect of main parameters and ultrasound technology on the drying kinetics and food quality were discussed. Inconsistencies were pointed out and analyzed in detail. Results showed that for ultrasound pre-treatment, the food products may lose or gain water and increase of ultrasonic parameters (sonication time, amplitude and ultrasound power) promoted the water loss or water gain. When ultrasound technology was applied prior to drying, an increase in drying kinetics was always observed, though some different results were also presented. For ultrasound assisted drying, the ultrasound power always gave a positive effect on the drying process, however, the magnitude of ultrasound improvement was largely dependent on the process variables, such as air velocity, air temperature, microwave power and vacuum pressure, etc. The application of ultrasound technology will somehow affect the food quality, including the physical and chemical ones. Generally, the ultrasound application can decrease the water activity, improve the product color and reduce the nutrient loss.     

Experimental investigations on ultrasound mediated particle breakage

This paper investigates the effect of high-intensity ultrasound on the breakage characteristics of particles suspended in water. A continuous sonicated flow experimental apparatus is used involving a 24 kHz horn type transducer and continuous in-line particle chord length measurement. The effects of sonication power (150-350 W) and temperature (10-50 degrees C) on the breakage characteristics are investigated. Higher breakage is favored at higher sonication power. An optimum temperature in the range tested is observed to exist between 25 degrees C and 37 degrees C. The acoustic cavitation field is influenced by temperature through a complex interplay of vapor pressure, surface tension and viscosity leading to the optimum observed in particle breakage. The efficiency of ultrasound energy conversion to particle breakage is calculated using calorimetry and found along with the net breakage efficiency to initially increase with temperature followed by a decrease after the optimum. It is found to be independent of input ultrasonic power. The effects of contact time is also investigated.     

Experimental and predictive study on the performance and energy consumption characteristics for the regeneration of activated alumina assisted by ultrasound

Activated alumina used in dehumidification should be regenerated at more than 110 °C temperature, resulting in excessive energy consumption. Comparative experiments were conducted to study the feasibility and performance of ultrasonic assisted regeneration so as to lower the regeneration temperature and raise the efficiency. The mean regeneration speed, regeneration degree, and enhanced rate were used to evaluate the contribution of ultrasound in regeneration. The effective moisture diffusivity and desorption apparent activation energy were calculated by theoretical models, revealed the enhanced mechanism caused by ultrasound. Also, we proposed some specific indexes such as unit energy consumption and energy-saving ratio to assess the energy-saving characteristics of this process. The unit energy consumption was predicted by artificial neural network (ANN), and the recovered moisture adsorption of activated alumina was measured by the dynamic adsorption test. Our analysis illustrates that the introduction of power ultrasound in the process of regeneration can reduce the unit energy consumption and improve the recovered moisture adsorption, the unit energy consumption was decreased by 68.69% and the recovered moisture adsorption was improved by 16.7% under 180 W power ultrasound compared with non-ultrasonic assisted regeneration at 70 °C when initial moisture adsorption was 30%. Meanwhile, an optimal regeneration condition around the turning point could be obtained according to the predictive results of ANN, which can minimize the unit energy consumption. Moreover, it was found that a larger specific surface area of activated alumina induced by ultrasound contributed to a better recovered moisture adsorption.     

High-power ultrasound in olive paste pretreatment. Effect on process yield and virgin olive oil characteristics

The effect of high-power ultrasound on olive paste, on laboratory thermo-mixing operations for virgin olive oil extraction, has been studied. Direct sonication by an ultrasound probe horn (105 W cm⁻² and 24 kHz) and indirect sonication with an ultrasound-cleaning bath (150 W and 25 kHz) were applied and their effects compared with the conventional thermal treatment.

A quick-heating of olive paste, from ambient (12–20 °C) to optimal temperature conditions (28–30 °C), and an oil extractability improvement were observed when applying sonication. Better extractability was obtained by direct sonication for high moisture olives (>50%) whereas indirect sonication gave greater extractability for low moisture olive fruits (<50%).

Optimal application of ultrasound was achieved with direct sonication for 4 min at the beginning of paste malaxation and with indirect sonication during the malaxation time.

Effect of high-power ultrasound on oil quality parameters and nutritional and sensory characteristics were studied. Changes in quality parameters (free acidity value, peroxide value, K270 and K232) were not found, however significant effects on the levels of bitterness, polyphenols, tocopherols (vitamin E), chlorophyll and carotenoids were observed. Oils from sonicated pastes showed lower bitterness and higher content of tocopherols, chlorophylls and carotenoids. Related to sensory characteristics, off-flavour volatiles were not detected in oils from sonication treatments. Total peak areas of volatiles and the ratio hexanal/E-2-hexenal, as determined by SPME analysis, were lower than non-sonicated reference oils; sensory evaluation by panel test showed higher intensity of positive attributes and lesser of negative characteristics than those untreated.     

Power ultrasound as a pretreatment to convective drying of mulberry (Morus alba L.) leaves: Impact on drying kinetics and selected quality properties

The effect of ultrasound pretreatment prior to convective drying on drying kinetics and selected quality properties of mulberry leaves was investigated in this study. Ultrasound pretreatment was carried out at 25.2–117.6 W/L for 5–15 min in a continuous mode. After sonication, mulberry leaves were dried in a hot-air convective dryer at 60 °C. The results revealed that ultrasound pretreatment not only affected the weight of mulberry leaves, it also enhanced the convective drying kinetics and reduced total energy consumption. The drying kinetics was modeled using a diffusion model considering external resistance and effective diffusion coefficient D_e and mass transfer coefficient h_m were identified. Both D_e and h_m during convective drying increased with the increase of acoustic energy density (AED) and ultrasound duration. However, D_e and h_m increased slowly at high AED levels. Furthermore, ultrasound pretreatment had a more profound influence on internal mass transfer resistance than on external mass transfer resistance during drying according to Sherwood numbers. Regarding the quality properties, the color, antioxidant activity and contents of several bioactive compounds of dried mulberry leaves pretreated by ultrasound at 63.0 W/L for 10 min were similar to that of mulberry leaves without any pretreatments. Overall, ultrasound pretreatment is effective to shorten the subsequent drying time of mulberry leaves without damaging the quality of final product.     

Individual and interactive effect of ultrasound pre-treatment on drying kinetics and biochemical qualities of food: A critical review

One of the earliest and most prevalent processing methods to increase the shelf-life of foods is drying. In recent years, there has been an increased demand to improve product quality while lowering processing times, expenses, and energy usage in the drying process. Pre-treatments are therefore effectively used before drying to enhance heat and mass transfer, increase drying efficiency, and lessen degradation of final product quality. When food is dried, changes are expected in its taste, color, texture, and physical, chemical, and microbial properties. This has led to the need for research and development into the creation of new and effective pre-treatment technologies including high-pressure processing, pulsed electric field, ultraviolet irradiation, and ultrasound. Sound waves that have a frequency >20 kHz, which is above the upper limit of the audible frequency range, are referred to as “ultrasound”. Ultrasonication (US) is a non-thermal technology, that has mechanical, cavitational, and sponge effects on food materials. Ultrasound pre-treatment enhances the drying characteristics by producing microchannels in the food tissue, facilitating internal moisture diffusion in the finished product, and lowering the barrier to water migration. The goal of ultrasound pre-treatment is to save processing time, conserve energy, and enhance the quality, safety, and shelf-life of food products. This study presents a comprehensive overview of the fundamentals of ultrasound, its mechanism, and how the individual effects of ultrasonic pre-treatment and the interactive effects of ultrasound-assisted technologies affect the drying kinetics, bioactive components, color, textural, and sensory qualities of food. The difficulties that can arise when using ultrasound technology as a drying pretreatment approach, such as inadequate management of heat, the employment of ultrasound at a limited frequency, and the generation of free radicals, have also been explained.     

Effect of multi-mode dual-frequency ultrasound pretreatment on the vacuum freeze-drying process and quality attributes of the strawberry slices

The effects of osmotic pretreatment assisted by ultrasound in different frequency modes before vacuum freeze-drying (VFD) on moisture migration and quality characteristics of strawberry slices were investigated. The frequency modes are single-frequency modes under 20, 40 kHz (SM-20, SM-40), and dual-frequency under 20/40 kHz including sequential mode (SeDM) and simultaneous mode (SiDM). The quality characteristics of dried strawberry products including rehydration, hardness, color, flavor, total anthocyanins, total phenols, vitamin C content, and active antioxidant components (DPPH and –OH) were determined. Results showed that drying time of the strawberry slices irradiated by ultrasound was reduced by 15.25%–50.00%, compared to the control samples. Besides, dual-frequency ultrasound shortened the drying time more than single-frequency ultrasound. The drying time of SeDM was the shortest. In addition to vitamin C content, the quality characteristics including rehydration, hardness, color, flavor, total anthocyanins, total phenols, and antioxidant activity of dried strawberry products pretreated by SeDM were significantly (p < 0.05) better than those of control and other pretreated samples. It can be concluded that the SeDM was an effective pretreatment method to produce high-quality vacuum freeze-dried strawberry products.     

Intensification of leaching process by dual-frequency ultrasound

Ultrasound is gaining importance in metal extraction process. In the previous laboratory scale investigation the authors have established the positive influence of ultrasound on copper recovery from oxide ores of Malanjkhand, Madhya Pradesh, India in an ammonical media. The process parameters in a conventional agitation method were optimized and a maximum recovery of ≈32% in 20 min was obtained without sonication. The recovery was increased to ≈78% by the application of ultrasound over the same period with several advantages like decrease in leaching time and the reagent consumption. In the present study the leaching process is intensified by studying the metal recovery variation at different ultrasonic frequencies (20, 40, 43 and 720 kHz) and intensities (up to 8 W cm⁻²) with sonication time. The results show that sinusoidal ultrasound even at larger intensity has some limitations with single frequency. However, simultaneous application of dual frequency 20 and 40 kHz ultrasound enhanced extraction rates along with increased yield. While conventional single frequency exposure at either one of the two frequencies at the same acoustic power level did not yield similar results, application of two wave sources, as used in the study revealed that it is possible to save energy through lowering of time of operation process.     

Influence of sequential exogenous pretreatment and contact ultrasound-assisted air drying on the metabolic pathway of glucoraphanin in broccoli florets

In this investigation, the combinations of exogenous pretreatment (melatonin or vitamin C) and contact ultrasound-assisted air drying were utilized to dry broccoli florets. To understand the influences of the studied dehydration methods on the conversion of glucoraphanin to bioactive sulforaphane in broccoli, various components (like glucoraphanin, sulforaphane, myrosinase, etc.) and factors (temperature and moisture) involved in the metabolism pathway were analyzed. The results showed that compared with direct air drying, the sequential exogenous pretreatment and contact ultrasound drying shortened the drying time by 19.0–22.7%. Meanwhile, contact sonication could promote the degradation of glucoraphanin. Both melatonin pretreatment and vitamin C pretreatment showed protective effects on the sulforaphane content and myrosinase activity during the subsequent drying process. At the end of drying, the sulforaphane content in samples dehydrated by the sequential melatonin (or vitamin C) pretreatment and ultrasound-intensified drying was 14.4% (or 26.5%) higher than only air-dried samples. The correlation analysis revealed that the exogenous pretreatment or ultrasound could affect the enzymatic degradation of glucoraphanin and the generation of sulforaphane through weakening the connections of sulforaphane-myrosinase, sulforaphane-VC, and VC-myrosinase. Overall, the reported results can enrich the biochemistry knowledge about the transformation of glucoraphanin to sulforaphane in cruciferous vegetables during drying, and the combined VC/melatonin pretreatment and ultrasound drying is conducive to protect bioactive sulforaphane in dehydrated broccoli.     

Application of airborne ultrasound in the convective drying of fruits and vegetables: A review

The application of airborne ultrasound is a promising technology in the drying of foods, particularly to fruits and vegetables. In this paper, designs of dryers using ultrasound to combine the convective drying process are described. The main factors affecting the drying kinetics with the ultrasound application are discussed. The results show that the ultrasound application accelerated the drying kinetics. Ultrasound application during the convective drying of fruits and vegetables shorten the drying time. Ultrasound application can produce an increase of the effective moisture diffusivity and the mass transfer coefficient. The influence of ultrasound on physical and chemical parameters evaluating the product quality is reviewed. Ultrasound application can decrease the total color change, reveal a low water activity and reduce the loss of some nutrient elements. Meanwhile, ultrasound application can also better preserve the microstructure of fruits and vegetables in comparison to convective drying.     

Changes in pore size distribution inside sludge under various ultrasonic conditions

The pore size distribution is quite significant for determining the transport capacity of heat and moisture in sludge during the drying process. It is crucial to investigate the transformation of the pore size in sludge under sonication. In this paper, the microstructures of pores inside sludge before and after ultrasonic treatment with various ultrasonic conditions were observed using a microscope. Fractal geometry and image analysis were combined to quantitatively identify the evolution of pore size in sludge undergoing various acoustic energy densities and treatment times. The surface fractal dimension (d_f) was applied to characterize the pore size distribution of sludge. The results confirmed that sonication has a positive influence on the characteristics of pore structure inside the sludge and that the average pore size increases with increasing ultrasonic energy level, as determined by both acoustic energy density and treatment time. The d_f appropriately characterizes and quantifies the evolution of the pore size distribution of sludge under various ultrasonic conditions. This work is quite valuable for further investigating and evaluating moisture removal in the sludge drying process assisted by ultrasonic treatment.     

Ultrasound applications in drying of fruits from a sustainable development goals perspective

This review focuses on the many contributions of ultrasound technologies for fruit drying toward the United Nations Sustainable Development Goals (SDG). Along this review, several aspects attained from the application of ultrasound technologies are correlated with the SDGs. The main ultrasonic technologies applied for fruit drying, such as ultrasonic bath, probe ultrasound, air-borne ultrasound air-drying, and ultrasound-assisted contact air-drying, are presented. An in-depth discussion on ultrasound contributions, its advantages, disadvantages, and limitations are made. The effects of ultrasound on water diffusivity in several fruits are presented by correlating this effect with drying time and cost of energy. Ultrasound-assisted fruit drying, like other food processing technologies, directly impacts Zero Hunger, but ultrasound technologies contribute to much more than delivering long shelf-life food. This technology can be used to produce healthy foods and provide well-being, which will be discussed by correlating the effects of ultrasound-assisted air-drying with the concentration of nutritional compounds. Ultrasound-assisted fruit drying reduces wastewater toxicity and energy consumption and improves productivity, potentially improving workplaces and salaries. A walk through the technology is presented from Zero Hunger to No Poverty.     

Applications of ultrasound to enhance fluidized bed drying of Ascophyllum Nodosum: Drying kinetics and product quality assessment

In this study, ultrasound either as a pretreatment technique or as an integrated technique was employed to enhance fluidized bed drying of Ascophyllum nodosum, and drying kinetics and dried product quality were assessed. In order to compare technology efficiency and dried product qualities, oven drying and fluidized bed drying (FBD) were employed. The novel drying methods included airborne ultrasound-assisted fluidized bed drying (AUA), ultrasound pre-treatment followed by FBD (USP), and hot water blanching pre-treatment followed byFBD (HWB). Six drying kinetics models were used to describe the drying curves, among which the Page model was the best in fitting USP and AUA. Model by Millidi et al. was employed to describe HWB. Airborne ultrasound in AUA did not reduce energy consumption or drying time, but retained total phenolic content (TPC) as well as colour, and exhibited the highest yield among the novel drying methods. USP and HWB showed lower energy consumption and drying time considerably, but the TPC was the lowest among the studied methods. At the same time, USP dried product exhibited the lowest a_w, followed by HWB and then AUA. This studyalso demonstrated that FBD could be a very practical drying method on Irish brown seaweed, and ultrasound-assisted drying methods may have potential developments in Irish brown seaweed drying process.     

A novel sub-pilot-scale direct-contact ultrasonic dehydration technology for sustainable production of distillers dried grains (DDG)

DDG is a major source of protein, calcium, phosphorus, and sulfur is arguably the most important byproduct of the bioethanol industry with increasing demand over the past few years. Reducing energy consumption in the DDG production process and energy recovery from DDG is vital for sustainable bioethanol productions. In this paper, a novel direct-contact multi-frequency, multimode, and modulated (MMM) ultrasonic dryer (US) was developed for the first time and has been applied in dehydration of wet distillers’ grain (WDG). Ultrasonic drying (US) was combined with a convective airflow (HA) at different temperatures of 25 (room temperature), 50 and 70 °C to evaluate the impact of US, HA, and US + HA on drying kinetics, activation energy, chemical compositions, microstructure, and color of DDG. Semi-empirical kinetic models were developed and evaluating drying performances showed that the application of ultrasound significantly enhanced the drying rate and decreased the drying time (by 46%), especially at low drying temperatures. The activation energy for moisture removal in the presence of ultrasound was about 50% of that without ultrasound. The final dried distillers' grains product processed by ultrasonic drying had a brighter color, a higher available protein, a higher digestible protein (the lowest acid detergent insoluble crude protein), and a better surface profile with no compromise on minerals and fiber contents.     

Experimental investigation of flow boiling heat transfer enhancement under ultrasound fields in a minichannel heat sink

Ultrasound is considered to be an effective active heat transfer enhancement method, which is widely used in various fields. But there is no clear understanding of flow boiling heat transfer characteristics in micro/mini-channels under ultrasonic field since the studies related are limited up to now. In this paper, a novel minichannel heat exchanger with two ultrasonic transducers inside the inlet and outlet plenum respectively is designed to experimentally investigate the impacts of ultrasound on flow boiling heat transfer enhancement in a minichannel heat sink. Flow visualization analyses reveal that ultrasound can promote rapid bubble motion, bubble detachment from heating wall surface and thereby new bubble generation, and decrease the length of confined bubble. Furthermore, the flow boiling experiments are initiated employing working fluid R141b at different ultrasonic parameters (e.g., frequency, power, angle of radiation) and heat flux under three types of ultrasound excitations: no ultrasound (NU), single inlet ultrasound (IU), inlet and outlet ultrasound (IOU). The results indicate that ultrasound has obvious augmentation effects on flow boiling heat transfer even though the intensification effects will be limited with the heat flux increases. The higher ultrasonic power, the lower ultrasonic frequency and the higher ultrasonic radiation angle, the better intensification efficiency. The maximum enhancement ratio of h_ave in the saturated boiling section reaches 1.88 at 50 W, 23 kHz and 45° under the experimental conditions. This study will be beneficial for future applications of ultrasound on flow boiling heat transfer in micro/mini-channels.