Dielectric permittivity, density, viscosity and refractive index of binary mixtures of anisole with methanol and 1-propanol at different temperatures

Static dielectric permittivity, density, viscosity, and refractive index of anisole (AN), methanol (MeOH), 1-propanol (1-PrOH) and binary mixtures of AN with MeOH and 1-PrOH at nine different concentrations, were measured at 303, 313 and 323 K temperatures. Measured properties of pure AN, MeOH and 1-PrOH were compared with literature values and they were found in good agreement. The investigation of binary mixtures showed a systematic change in static dielectric permittivity, density and viscosity with change in concentration of anisole in the mixture. Measured properties of liquid samples were used to calculate Kirkwood correlation factor and excess parameters such as excess dielectric permittivity, excess molar volume and excess viscosity. Determined parameters have been interpreted in terms of molecular interaction among the molecular species of the binary mixtures.     

Ultrasonic study of binary mixtures of acetone with chlorobenzene at different frequencies

The ultrasonic velocity (C) and density (ρ) have been measured at different frequencies (1MHz, 3MHz and 5 MHz) in the binary mixtures of acetone with chlorobenzene over the entire range of mole fraction at temperature 303.16K. The data of C and ρ have been used to evaluate the isentropic compressibility (β), intermolecular free length (L_f) and acoustic impedance (Z) and their excess values to elucidate the molecular association in the mixture. The variation of these parameters with solute (acetone) indicates the nature of interaction present in the binary mixture.     

Ultrasonic studies of intermolecular interactions in binary mixtures of 4-methoxy benzoin with various solvents: Excess molar functions of ultrasonic parameters at different concentrations and in different solvents

Density (ρ), ultrasonic velocity (U), for the binary mixtures of 4-methoxy benzoin (4MB) with ethanol, chloroform, acetonitrile, benzene, and di-oxane were measured at 298 K. The solute–solvent interactions and the effect of the polarity of the solvent on the type of intermolecular interactions are discussed here. From the above data, adiabatic compressibility (β), intermolecular free length (L_f), acoustic impedance (Z), apparent molar volume (Ø), relative association (RA) have been calculated. Other useful parameters such as excess density, excess velocity and excess adiabatic compressibility have also been calculated. These parameters were used to study the nature and extent of intermolecular interactions between component molecules in the binary mixtures.     

Study of intermolecular interactions in binary mixtures of 2′-chloro-4-methoxy-3-nitro benzil in various solvents and at different concentrations by the measurement of acoustic properties

Density (ρ), ultrasonic velocity (u), adiabatic compressibility (β), apparent molar volume (Ø), acoustic impedance (Z), intermolecular free length (L_f), relative association (RA) of binary mixtures of 2′-chloro-4-methoxy-3-nitro benzil (abbreviated as 2CBe) in ethanol, acetonitrile, chloroform, dioxane and benzene were measured at different concentrations at 298 K. Several useful parameters such as excess density, excess ultrasonic velocity, excess adiabatic compressibility, excess apparent molar volume, excess acoustic impedance and excess intermolecular free length have been calculated. These parameters are used to explain the nature of intermolecular interactions taking place in the binary mixture. The above study is useful in understanding the solute – solvent interactions occurring in different concentrations at room temperature.     

Thermophysical properties of binary mixtures of odichlorobenzene and o-chlorophenol with diethyl ether, tetrahydrofuran, cyclohexane and anisole

Measurement of density and viscosity has been used for evaluating derived parameters for binary system of o-dichlorobenzene and o-chlorophenol with diethyl ether, tetrahydrofuran, cyclohexane and anisole at the different temperatures and at atmospheric pressure. From these, excess parameters have been calculated over entire range of composition. The variation of derived parameters as well as the sign and magnitude of corresponding excess functions has been used to investigate the type and extent of interaction between the component molecules of the binary mixture.     

Correlation studies on dielectric and thermodynamic parameters in the binary mixtures of N-methyl aniline and alcohols

The dielectric and thermodynamic studies on polar binary mixtures of N- methyl aniline with alcohols — propan-1-ol and propan-2-ol have been carried out, at different temperatures and mole fractions. LF impedance analyzer, Microwave bench and Abbe’s refractometer are used respectively in radio, microwave (X-Band) and high frequency regions to determine the dielectric data. The experimental data is used to correlate the dielectric and thermodynamic parameters — static permittivity, high frequency permittivity, Kirkwood effective correlation factor, corrective Kirkwood correlation factor, excess permittivity, excess Helmholtz free energy, dipole moment, excessive dipole moment, relaxation time, excess inverse relaxation time and the excess thermodynamic parameters. These parameters are used to interpret the molecular interactions between the molecular species of the liquid mixtures.     

Study of acoustic parameters of binary mixtures of a nonpolar liquid with polar liquid at different frequencies

The densities (ρ) and ultrasonic velocities (C) of binary mixture of diisopropyl ether (DIPE) and bromobenzene (BB) have been measured at different frequencies (1 MHz, 3 MHz and 5 MHz) over the entire range of mole fraction of diisopropyl ether (DIPE) at temperature 303 K. The intermolecular free length (L _f ), isentropic compressibility (β), acoustic impedance (Z) and excess values of isentropic compressibility (β ^E ) and acoustic impedance (Z^E) have been computed using values of ultrasonic velocity (C) and density (ρ). The ultrasonic velocity, intermolecular free length are positive whereas the excess values of isentropic compressibility and acoustic impedance are negative over the entire composition range of DIPE which indicates presence of specific interactions between unlike molecules. The results are discussed in the light of intermolecular interactions occurring in the mixtures.      

Densities and volumetric properties of 2-chloroethanol with N,N-dimethylformamide and water at different temperatures

Densities of binary mixtures of 2-chloroethanol with N,N-dimethylformamide (DMF) and water have been measured over the full range of compositions at various temperatures. From these results, excess molar volumes, V^E and excess partial molar volumes at infinite dilution, V¯_i^E,0 have been calculated. V^E for (DMF + 2-chloroethanol) mixture are positive over the whole mole fraction range and negative values are obtained for (water + 2-chloroethanol) mixture.     

Ultrasonic study of nitric acid

I.IntroductionBymeansofu1trasonicwavesthedynamicspecificpropertiesofmolecu1esinmediacouldbeapprehended.Fromthe195ostol96osacousticiansstudiedmo1ecu1aracousticandthermodynamicspecificpropertiesof1iquidsandmixtureswithgreate.th.siasm['-'],andkeptonbringto1ighttheirreportsofrc1evantstudiesinthe1astten-oddyearsl'-'l.overrecentyearstheauthorhasbeenengagedinthemeasurementandstudyofsoundve-locityofsevera1chemica1so1utionsinassociationwithu1trasonicmeasurementstudyofthecon-centrationofsolutionsproduce…     

Excess molar volumes, viscosities, and refractive indices for binary and ternary mixtures of {cyclohexanone (1) + N,N-dimethylacetamide (2) + N,N-diethylethanolamine (3)} at (298.15, 308.15, and 318.15) K

Densities ρ, viscosities η, and refractive indices n_D, of the binary and ternary mixtures formed by cyclohexanone + N,N-dimethylacetamide + N,N-diethylethanolamine were measured at (298.15, 308.15, and 318.15) K for the liquid region and at ambient pressure for the whole composition ranges. The excess molar volumes V_m^E, viscosity deviations Δη, and refractive index deviations Δn_D, were calculated from experimental densities and refractive indices. The excess molar volumes are positive over the mole fraction range for binary mixtures of cyclohexanone(1) + N,N-dimethylacetamide (2) and N,N-dimethylactamide (2) + N,N-diethylethanolamine (3) and increase with increasing temperatures from (298.15 to 318.15) K. The excess molar volumes of cyclohexanone (1) + N,N-diethylethanolamine (3) are S-shaped dependence on composition with negative values in the N,N-diethylethanolamine rich-region and positive values at the opposite extreme and increase with increasing temperatures from (298.15 to 318.15) K. The excess molar volumes are positive over the whole mole fraction ranges for the ternary mixtures at all temperatures. Viscosity deviations are negative over the mole fraction range for all binary and ternary mixtures and decrease with increasing temperatures from (298.15 to 318.15) K. Refractive index deviations are negative over the mole fraction range for all binary and ternary mixtures and increase with increasing temperatures from (298.15 to 318.15) K. The experimental data of constitute were correlated as a function of the mole fraction by using the Redlich–Kister equation for binary and , Cibulka, Jasinski and Malanowski , Singe et al., Pintos et al., Calvo et al., Kohler, and Jacob–Fitzner for ternary mixture, respectively. McAllister^'s three body, Hind, and Nissan–Grunberg models were used for correlating the kinematic and dynamic viscosity of binary mixtures. The experimental data of the constitute binaries are analyzed to discuss the nature and strength of intermolecular interactions in these mixtures.     

Influence of Tetra Alkyl Ammonium Cation on Thermo-Physical Properties of N,N-Dimethyl Formamide with 1,4-Dioxane at Different Temperatures

Ultrasonic technique, transport properties and related acoustical parameters of 1,4-dioxane and N,N-dimethyl formamide were prepared of different % compositions at variable temperatures using tetra alkyl ammonium iodide salts (R₄NI) of 0.14 M, to investigate inter-ionic interactions, molecular interactions, molecular rearrangement, molecular association etc. The densities were measured by using magnetic float densitometer. Transport properties provide a deep and meaningful insight of various interactions taking place between the binary liquid mixtures with salts. We have observed the influence of small as well as large alkyl chain length (R₄N⁺), and extract the information with respect to various kinds of intermolecular interactions such as dipole-dipole, dipole-induced dipole, solute-solvent, dispersive type and H-bonding interaction between the components. Such observations in the presence of specific molecular interactions of binary solutions and structural effects were analyzed on the basis of measured and derived thermo-dynamical parameters.     

Excess properties of methanol-water binary system at various temperatures

Summary  In this study the viscosities of binary mixtures of methanol and water have been measured in the temperatures ranging from 15 to 45°C. The structural changes occurring as a consequence of molecular interactions in the solutions have been discussed in detail. Nevertheless, it would be of interest to see whether the information obtained from viscosity studies can be corroborated with that obtained from dielectric-constant data. With this aim, the present study on the dielectric behaviour of methanol-water binary solutions has been undertaken. The static dielectric constants, densities and refractive indices have been also measured on the methanol-water mixtures expressed by the mole fraction of methanol (0<x₂<1). Excess dielectric constants, excess volumes, excess viscosities and excess Gibbs energies of activation of the viscous flow and Kirkwood correlation factors have been evaluated using experimental results since these calculations may lead to conclusions concerning the deviation of the system from an ideal-mixture behaviour.     

Ultrasonic velocity, density, viscosity and their excess parameters of the binary mixtures of tetrahydrofuran with methanol and o-cresol at varying temperatures

The ultrasonic velocity, density and viscosity of binary mixtures of tetrahydrofuran (THF) with methanol and o-cresol were measured at 293, 303 and 313 K over the entire range of composition. Using these experimental data, various thermo-acoustic parameters such as deviation in isentropic compressibility Δκ_s, excess molar volume , viscosity deviation Δη and excess Gibb’s free energy of activation for viscous flow ΔG^∗E have been calculated and fitted to Redlich-Kister polynomial equation. The deviation/excess parameter were plotted against the mole fraction of THF over the whole composition range. The observed negative and positive values of deviation/excess thermo-acoustic parameters were explained on the basis of the intermolecular interactions present in these mixtures. Since methanol is less acidic than o-cresol, the removal of proton from methanol is less likely than the removal of proton from o-cresol which is more acidic than methanol. Hence the intermolecular interaction in the mixture of THF with o-cresol is found to be stronger than mixture of THF with methanol, which is reflected from the observed positive and negative values of excess thermo-acoustic parameters. Thus it may be concluded that THF + o-cresol mixture exhibits strong intermolecular interaction. However, dispersive forces are responsible for THF + methanol mixture due to weak interaction. Further, Nomoto, Junjie, CFT and Flory’s theory were applied for evaluating the ultrasonic velocity theoretically. The theoretical evaluation of ultrasonic velocity based on molecular models in liquid mixtures has been used to correlate with the experimental findings and to know the thermodynamics of the mixtures. The comparison of theoretical and experimental results provides better understanding about the validity of the various thermodynamic, empirical, semi empirical and statistical theories.     

Dielectric relaxation and related studies of 4-ethylphenol-methanol mixtures using time domain reflectometry

The dielectric relaxation studies of 4-ethylphenol-methanol mixtures have been carried out at various temperatures ranging from 10°C to 40°C using time domain reflectometry in the frequency range 10 MHz to 10 GHz. The relaxation mechanism in these systems is explained by Cole-Davidson model. The excess dielectric parameters, Kirkwood correlation factor and activation energy have been calculated and discussed with respect to molecular arrangements, and microdynamics of the binary mixture composed of both the associative type of liquids.     

二元合金高速定向凝固过程的相场法数值模拟

利用相场法对二元合金高速定向凝固过程进行了模拟，为简化计算，采用了温度冻结近似.模拟了定向凝固时平界面失稳、界面形态演化、溶质浓度分布以及高速绝对稳定性条件下胞晶向平面晶的转变等，得到了不同抽拉速度下胞晶间距、胞晶尖端温度以及有效溶质分配系数等参数，显示了高速生长条件下的溶质截留效应. 关键词： 定向凝固 相场法 高速绝对稳定性 溶质截留     

Temperature measurements in plasmas generated by using lasers at different intensities

The temperature of laser-generated pulsed plasmas is an important property that depends on many parameters, such as the particle species and the time elapsed from the laser interaction with the matter and the surface characteristics.

Laser-generated plasmas with low intensity (<10¹⁰ W/cm²) at INFN-LNS of Catania and with high intensity (>10¹⁴ W/cm²) in PALS laboratory in Prague have been investigated in terms of temperatures relative to ions, electrons, and neutral species. Time-of-flight (ToF) measurements have been performed with an electrostatic ion energy analyzer (IEA) and with different Faraday cups, in order to measure the ion and electron average velocities. The IEA was also used to measure the ion energy, the ion charge state, and the ion energy distribution.

The Maxwell–Boltzmann function permitted to fit the experimental data and to extrapolate the ion temperature of the plasma core.

The velocity of the neutrals was measured with a special mass quadrupole spectrometer. The Nd:Yag laser operating at low intensity produced an ion temperature core of the order of 400 eV and a neutral temperature of the order of 100 eV for many ablated materials. The ToF of electrons indicates the presence of hot electron emission with an energy of ～1 keV.     

Analysis of structural properties of refractory compounds at high temperature and pressure using a potential model

In this paper we focused on the structural and elastic properties of four transition metal mononitrides (TMNs) (M=Ti, Nb, Hf and Zr) by using realistic three body interaction potential (RTBIP) model, including the role of temperature. These TMN compounds have been found to undergo NaCl (B1) to CsCl (B2) phase transition, at a pressure quite high as compared to other binary systems. We successfully obtained the phase transition pressures and volume changes at different temperatures. In addition, elastic constants of TMNs at different temperatures are discussed. The present theoretical results have been compared with the available experimental data and predictions of LDA theory.     

Color gamut variation of LED-lit LCD at different module temperatures

In this paper, we have investigated the color gamut variation of a liquid crystal display (LCD) system with tri-chromatic (red, green and blue) light-emitting diodes (LEDs) as the backlight source at different color and module temperatures. Since the transmission band of a color filter (CF) is broader than those of LEDs, light leakage from the CF results in changes in the color gamut with varying color temperatures. In our case, the color gamut increased and then saturated with increasing color temperatures. The color temperature increased monotonically with increasing module temperatures whereas the color gamut may increase, decrease, or assume an optimized value in different cases. The latter resulted from the temperature-dependent intensity and wavelength variation of the RGB-LEDs. Three sets of tri-chromatic LEDs with different emission wavelengths were used. We have shown that by using green and blue LEDs with longer and shorter emission wavelengths, respectively, crosstalk due to the light leakage could be effectively suppressed. A stably high LCD above 101% NTSC operating over a wide range of module temperatures from 5 to 70 °C was demonstrated, and an optimal color performance with color gamut 102.52% NTSC was obtained at a color temperature of 6500 K and a module temperature of 25 °C.     

三羟甲基甲胺、季戊四醇及其二元体系固-固相变的变温红外光谱研究

利用傅里叶变温红外光谱仪分别测定了三羟甲基甲胺（TAM）、季戊四醇（PE）及其二元体系变温红外谱。实验表明，多元醇分子中羟基吸收峰随温度升高耐发生位移向高波数移动，此结果既能反映多元醇及其二体系固－固相变的温度区间，又与转变热相对应，从而揭示了多元醇及其二元体系固－固相变贮热的机理。