Photochemical synthesis of ZnO/Ag nanocomposites

Composite ZnO/Ag nanoparticles have been formed via the photocatalytic reduction of silver nitrate over the ZnO nanocrystals, their optical, electrophysical and photochemical properties have been investigated. Mie theory has been applied to analyze the structure of the absorption spectra of ZnO/Ag nanocomposite. The irradiation effects upon the optical properties of ZnO/Ag nanostructure have been investigated. It has been found that the irradiation of ZnO/Ag nanoparticles results in electrons accumulation by both the semiconductor and the metallic components of the nanocomposite. It has been found that silver nitrate can be photochemically deposited onto the surface of ZnO nanoparticles under the illumination with the visible light in the presence of the sensitizer – methylene blue. Kinetics of the sensitized Ag(I) photoredution has been studied. It has been concluded that the key stage of this process is the electron injection from singlet-excited methylene blue molecule into ZnO nanoparticle.     

太阳能光催化制氢的科学机遇和挑战

面对人类对能源的需求持续增长,以及化石能源的日益枯竭和其带来的环境污染问题,太阳能成为主要的可再生清洁能源的来源。讨论了利用太阳能催化生氢或消耗二氧化碳,探索在半导体基光催化剂表面的光催化反应和光化学反应。半导体材料被认为是最有前景的光催化剂,其材料合成是发展先进催化剂的核心。减少电荷重新复合,是提高太阳能转化为化学能的关键,关系到太阳能的转换效率。研究结果发现了提高光催化制氢的关键因素,通过Pt-PdS/CdS催化体系使其量子效率提高到93%,提供了发展高效催化剂体系的方法。     

双金属/TiO2纳米管复合结构中增强的光电流

将传统半导体材料与金属微纳结构相结合,利用其表面等离激元共振效应,可有效地增强复合结构的光电转换效率,使其广泛地被用于光电化学和光电探测等领域.本文以氧化铝纳米管为模板,采用原子层沉积技术制备出高有序的TiO2纳米管,并通过电子束热蒸发技术在大孔径的纳米管薄膜中分别负载金、铝和双金属金/铝纳米颗粒,形成金属纳米颗粒/TiO2纳米管复合结构.研究结果表明,相对于纯TiO2纳米管,Au/TiO2复合纳米管在568 nm的可见光照射下,其光电流密度约有400%的提高;在365 nm紫外光照射下,Al/TiO2复合纳米管的光电流提高约50%;同时负载双金属Au和Al纳米颗粒的TiO2纳米管在整个紫外-可见光区域光电流均显著增强.     

Synthesis and structural characterisation of CdS nanoparticles prepared in a four-components "water-in-oil" microemulsion

Nanostructured semiconductor particles are currently under intense investigation because of their enhanced photoreactivity and photocatalytic properties due to the quantum-size effect and the dependence of the photophysical and photochemical properties on their size as it approaches the exciton diameter. This increasing interest has led to the development of several synthetic procedures to prepare and stabilise uniform crystallites. In this paper, we report a novel synthetic pathway to obtain cadmium sulphide (CdS) nanoparticles in a quaternary "water-in-oil" microemulsion formed by a cationic surfactant cetyltrimethylammonium bromide (CTAB), pentanol, n-hexane and water. The synthesis of CdS in this system is achieved by mixing two microemulsions containing Cd(NO3)2 and Na2S, respectively. The nanocrystals have been characterised by using UV--visible spectroscopy and Transmission Electron Microscopy to investigate the influence of various parameters of the particles' formation and stability in solution. Capping of nanoparticles with suitable organic molecules has been performed in order to increase their stability and afford solubility in a wide range of solvents.     

Photocatalytic disinfection of water with Ag–TiO2 nanocrystalline composite

A method of solution impregnation and calcination has been demonstrated for synthesizing nanoparticles of Ag–TiO₂ composite photocatalysts for use in the disinfection of water. Only a small proportion of the TiO₂ surface is covered by nano-islands of Ag corresponding to a loading of 4 wt.% of Ag; thus, most of the TiO₂ surface is available for photocatalytic function. Although the primary particles of both Ag and TiO₂ are in the 10- to 20-nm range, microscopic studies indicate that the primary particles of Ag are deposited on nano-agglomerates of 30- to 70-nm-sized TiO₂. It is seen that the relatively small loading of Ag has not caused any UV–vis spectral shift but has enhanced the rate of photocatalytic antibacterial action of TiO₂, presumably by electron trapping.     

Development of photocatalyst coated fluoropolymer based microreactor using ultrasound for water remediation

Formation of thin layers of photocatalyst in photo-microreactor is a challenging work considering the properties of both catalyst and the microchannel material. The deposition of semiconductor materials on fluoropolymer based microcapillary requires the use of economical methods which are also less energy dependent. The current work introduces a new method for depositing nanoparticles of TiO₂ on the inner walls of a hexafluoropropylene tetrafluoroethylene microtube under mild conditions using ultrasound technique. During the ultrasonication process, changes in the polymer surface were observed and characterized using Attenuated Total Reflectance spectroscopy, Scanning Electron Microscopy and Confocal Microscopy. The rough patches form sites for catalyst deposition resulting in the formation of thin layer of TiO₂ nanoparticles in the inner walls of the microtube. The photocatalytic activity of the TiO₂ coated fluoropolymer based microcapillary was evaluated for removal of phenol present in water.     

Microstructure and photocatalytic activity of titanium dioxide nanoparticles

Titanium dioxide nanoparticles with an average diameter of about 10 nm are fabricated using a sintering method. The degradation of methyl orange indicates that the photocatalytic efficiency is greatly enhanced, which is measured to be 62.81%. Transmission electron microscopy is used to investigate the microstructure of TiO 2 nanoparticles in order to correlate their photocatalytic properties. High-resolution transmission electron microscopy examinations show that all the nanoparticles belong to the anatase phase, and pure edge dislocations exist in some nanoparticles. The great enhancement of photocatalytic efficiency is attributed to two factors, the quantum size effect and the surface defects in the nanoparticles.     

Photocatalytic degradation of ciprofloxacin drug in water using ZnO nanoparticles

We report the synthesis of nanostructure ZnO semiconductor with ～2.1 nm diameter using a chemical precipitation method. The resulting nanoparticles were characterized by X-ray diffraction analysis (XRD), Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The optical properties were investigated by UV–vis and fluorescence techniques. The absorption spectra exhibit a sharp absorption edge at ～334 nm corresponding to band gap of ～3.7 eV. The fluorescence spectra displayed a near-band-edge ultraviolet excitonic emission at ～410 nm and a green emission peak at ～525 nm, due to a transition of a photo-generated electron from the conduction band to a deeply trapped hole. The photocatalytic activity of the prepared ZnO nanoparticles has been investigated for the degradation of ciprofloxacin drug under UV light irradiation in aqueous solutions of different pH values. The results showed that the photocatalytic degradation process is effective at pH 7 and 10, but it is rather slow at pH 4. Higher degradation efficiency (～50%) of the drug was observed at pH 10 after 60 min. Photodegradation of the drug follows a pseudo-first-order kinetics.     

表面结构对SnO2半导体纳米粒子荧光性质的影响

本文利用荧光光谱对ＳｎＯ２纳米粒子水溶胶及其有机溶胶的光学性质进行了研究。发现粒子的表面结构对其光学性质具有极大的影响。水溶胶的荧光发射是由氧空位控制的,其发射强度工;有机溶胶由于表面活性剂的作用,改变粒子的表面结构,得到较强的荧光发射。     

A simple and versatile mini-arc plasma source for nanocrystal synthesis

Nanocrystals in the lower-nanometer-size range are attracting growing interest due to their unique properties. A simple and versatile atmospheric direct current mini-arc plasma source has been developed to produce nanoparticles as small as a few nanometers. The nanoparticles are formed by direct vaporization of solid precursors followed by a rapid quenching. Both semiconductor tin oxide and metallic silver nanoparticles have been produced at rates of 1–10 mg/h using the mini-arc source. Transmission electron microscopy and X-ray diffraction analyses indicate that most nanoparticles as produced are nonagglomerated and crystalline. Size distributions of nanoparticles measured with an online scanning electrical mobility spectrometer are broader than the self-preserving distribution, suggesting that the nanoparticle growth is coagulation-dominated, and that the particles experience a range of residence times. The electrical charges carried by as-produced aerosol nanoparticles facilitate the manipulation of nanoparticles. The new mini-arc plasma source hence shows promise to accelerate the exploration of nanostructured materials.