一种用于密集波分复用系统中的可调谐液晶法布里-珀罗滤光片

基于液晶分子的双折射特性，设计并制作了一种结构简单的可用于波分复用系统中的可调谐液晶法布里-珀罗滤光片。对器件的光谱调谐特性进行了分析和模拟，并得到了液晶分子的折射率调制与其分子在电场作用下产生的转动角度之间的关系式。最后，对所设计的结构进行了制作和实验，测试结果显示了滤光片的性能受液晶分子的排列特性和法布里-珀罗腔的反射镜参量的影响较大，同时实验表明了这种利用向列型液晶分子作为法布里-珀罗腔内介质的可调谐滤光片在加电压调试下其调谐性能良好，调谐范围可覆盖C波段，透过峰的半峰全宽达到了0．8nm，实验结果与设计相吻合。     

超宽带可调谐全固态单频激光器的方法研究

对目前实现超宽带(数十到数百纳米)可调谐全固态单频激光器的常用方法进行了综述,介绍了棱镜色散腔、闪耀光栅色散腔、体布拉格光栅衍射腔、双折射滤光片干涉腔、声光调谐光学滤波器衍射腔和电光调谐光学滤波器干涉腔调谐选频的原理及实现方式。对以上方案的优缺点、实现的难易程度及可操作性进行了对比分析,分析表明超宽带可调谐全固态单频激光器可通过不同调谐方法结合谐振腔型设计或频率精选器件(如FP标准具等)实现。     

电压压调谐多级液晶滤光片的理论研究

依据电压调谐多级液晶滤光片的设计原理,给出了设计实例。主要讨论了三片液晶盒组成的多级滤光片,在滤光片系统中液晶盒可以采用相同厚度,也可以使厚度成一定比例。厚度成比例的多级滤光片,其透射波长可通过调节外加电压而连续改变,调谐范围400~800 nm,覆盖整个可见光区;采用相同厚度液晶盒组成的多级滤光片可以从多条谱线中滤出所需要的波长。原理上两种形式都可以获得性能良好的滤光片。     

一种新型可调谐红外滤光片的设计和应用

可调谐红外滤光片是高分辨率红外成像仪谱段识别和分光的重要光学器件.本文介绍了一种新型可调红外滤光片———液晶法布里-珀罗滤光片的基本原理、设计参数、制作方法,分析了这种滤光片的透射光谱、精细度、带宽、镜面反射率和腔长之间的关系,以及外加电压和温度对透射波长的影响,给出了消除偏振效应的几种方案.并对液晶法布里-珀罗滤光片在空间遥感,特别是红外探测方面的应用前景进行了展望.     

可调谐液晶滤波器的调谐性能研究

在电调谐液晶法布里一珀罗腔滤波器的连续调谐过程中,存在“透射峰跳跃”现象,影响器件的单调调谐性。为了改善器件的单调调谐性能,对此现象进行了分析,表明这是由于法布里—珀罗腔干涉级次在调谐过程中发生改变引起的;进而给出了法布里一珀罗腔透射波长λ,干涉级次m与腔内介质折射率n的关系,以及器件实际的有效调谐范围。当腔长为10μm、折射率差为0．05时,就可以使器件的单调调谐范围达到整个C波段。数值模拟与实验结果相吻合。并针对改善器件的单调调谐性能,提出了几种可行的方案。     

角度调谐滤光片带宽消偏振研究

倾斜入射时薄膜窄带滤光片的s和p偏振光的带宽会随着入射角度的增大出现分离,限制了滤光片的调谐范围。分析了偏振光带宽分离现象出现的原因和其与滤光片镜层膜系结构的关系,并得到了消除偏振光带宽分离现象的方法。根据该方法对前期设计的100GHz密集波分复用(DWDM)系统四腔角度调谐窄带滤光片进行了改进,结果表明,该方法能有效的解决偏振光带宽的分离问题,扩大调谐范围。     

可调谐液晶红外滤光片的光学特性分析

可调谐红外滤光片是高分辨率红外成像仪谱段识别和分光的重要光学器件。采用琼斯矩阵方法对平行向列相和90°扭曲向列相液晶法-珀红外滤光片的本征偏振态及光学特性进行了研究。结果表明,当非偏振光垂直入射时,平行向列相液晶法-珀滤光片在任何电压下两组本征偏振态均不发生模式混合,具有偏振敏感性;90°扭曲向列相液晶法-珀滤光片在电压较低时具有偏振敏感性,当电压大于三倍Freedericksz阈值电压时,两组本征偏振态发生模式混合,偏振敏感性消除。     

可见光液晶光谱成像系统研究

利用向列相液晶材料的电控双折射效应,研制了用于可见光波段光谱调谐的大口径液晶可调滤光片,透过光谱测试表明,该滤光片在可见光波段(420~700 nm)以20 nm光谱分辨率可实现连续调谐和任意波长选择。利用该滤光片搭建了一种小型光谱成像系统,并在实验室内对若干样品进行了测试,结果表明,该系统可同时实现高图像分辨率和高光谱分辨率光谱成像,具备高、超光谱分辨率光谱成像的应用潜力,在生物医学、环境保护和资源探测等领域具有较好的应用前景。     

双通偏振干涉滤光片的研究

研究了等厚度双通偏振干涉滤光片，在此基础上提出了新型双通偏振干涉滤光片，并分析了单通、双通以及新型双通偏振干涉滤光片的光谱特性。结果表明，新型双通偏振干涉滤光片不仅具有更好的光谱特性，而且能进一步减少延迟片数目，具有非常重要的实用价值，可望在基于硅片的液晶投影仪分/合色系统中得到广泛应用。     

基于LCTF的多光谱面阵CCD相机的辐射定标

基于液晶可调谐滤光片(LCTF)的多光谱面阵CCD相机是一种新型的多(高)光谱成像系统,它利用液晶的电控双折射效应和偏振光的干涉原理,在面阵CCD上记录任意一个波长的图像信息.由于LCTF和帧转移型面阵CCD工作方式的特殊性,普通的定标方法不能满足遥感应用的精度需求.提出用积分球+标准探测器的定标系统对相机进行性能检测...     

可调谐液晶法-珀滤光片的研究

提出了一种可用于密集波分复用系统中的新型可调谐滤光片的设计方法,该设计利用了液晶的双折射现象,以及液晶盒内法-珀效应,从理论上分析了器件的光谱特性,计算了液晶分子的折射率调制和其分子转动角度的关系.并对器件进行了性能测试.实验结果与理论吻合较好.     

Electrically tunable Sagnac filter based on a photonic bandgap fiber with liquid crystal infused

We demonstrate an electrically tunable Sagnac filter based on a photonic bandgap fiber that is realized by infusing liquid crystal into a solid-core air-hole photonic crystal fiber. The filter enables an electrical tuning with a range of about 26 nm for one single interference minimum in the transmission bandgap from 1330 to 1650 nm wavelength. The tuning efficiency is averaged to 0.53 nm/V.     

Free-spectral range tunable Fabry-Perot filter with superimposed fiber Bragg gratings

A novel free-spectral range (FSR) tunable Fabry-Perot filter (FPF) with two superimposed fiber Bragg gratings (SFBGs) is proposed and experimentally demonstrated. The SFBGs, initially uniform in period with slightly different Bragg wavelengths, were glued onto the lateral surface of a specially-designed cantilever beam and linearly chirped by beam bending-induced strain gradient. As a result, their reflection bands overlap and a grating-based FPF with a tunable FSR is formed. A continuously tunable FSR of 0.1-0.5 nm has been achieved in the experiment.     

Multiple-stage liquid crystal tuned filter

A voltage controlled multiple-stage tunable filter with broad continuous tuning range was studied in theory and experiment. Four liquid crystal retarders, two quartz plates with certain integral ratio phase retardations and five polarization films were assembled into a traditional Lyot filter. The tunable function was achieved by using the electro-birefringence effect of liquid crystal. The result of numerical simulation showed that the spectral resolution was ∼10 nm around bands of 500-700 nm; side forms rejection ratio and FWHM changed in contrast to considering and not considering the birefringence dispersion effect of liquid crystal and quartz; the shape of filtered light displayed by spectral photometer would be affected by spectrum bands of light source in spectral photometer. A four-stage tunable filter was made and tested, experiment results agreed with the numerical simulation results very well, the research results could be applied as reference for the study of broad spectrum tunable filters.     

利奥型可调谐液晶电光滤波器的特性分析

根据液晶的电光效应和利奥滤波器的原理设计了利奥型液晶电光调谐滤波器，并且从理论上和实验上证明了其可行性；为了克服其在红外波段的缺点，设计了法布里-珀罗腔液晶可调谐滤波器，并且给出了理论模拟。理论模拟证明法布里-珀罗腔液晶可调谐滤波器具有调谐范围大、带宽窄的优点。     

Piezospectroscopic imaging with a tunable Fabry-Perot filter and Tikhonov reconstruction

By combining two well-established techniques--multispectral imaging with a tunable filter and regularized data inversion--a fast and accurate method for measuring, at each pixel of a CCD array, the spectrum emitted by a radiating object is obtained. The method is demonstrated with ruby R(1)- and R(2)-line fluorescence, using a narrowband tilt-tunable Fabry-Perot interference filter for data acquisition. Since the data inversion problem is badly ill conditioned, regularization is essential to obtain meaningful results. The reconstruction is capable of a peak wavelength accuracy of 0.01 nm, sufficient to measure the small wavelength shifts encountered in rubylike materials due to changes in the local crystal lattice stress. Thus, the technique presents a novel approach to piezospectroscopic imaging and offers 2 to 3 orders of magnitude faster mapping of local stress than current techniques.     

An interferometric study of a model of a biomembrane based on liquid crystal

A variation in the thickness of a biomembrane based on liquid crystal is experimentally studied in the presence of external electric field using a low-Q-factor Fabry-Perot interferometer. Variation in the thickness of the membrane is determined with the aid of the interference pattern of the reflected beam with an accuracy of up to 0.1 Å. The nonlinear elasticity of the liquid crystal is determined from the experimental data. Chaotic fluctuations of the membrane are observed at a certain threshold voltage.