某机载瞄准系统精度评估测试方法

为了评估某型机载瞄准系统的精度,根据飞行试验参数测试需要,提出了通过图像测量与DGPS融合处理方法进行瞄准精度评估的试验方案。该方案利用飞行试验获取的图像数据与其他测量数据相结合,建立精度评估的方法,该评估方法在该机载武器瞄准系统精度评估得到应用,并且可在同类试验课题中推广应用。     

Slant range visibility determination from lidar signatures by the two-point method

Careful measurement of slant range visibility is becoming more important for safe and regular aircraft landing operation. Measurements are necessary under conditions of less than 1500 m visibility up to altitudes of about 100 m. Discussions of the use of laser radar systems to measure the optical properties of the atmosphere have been published. For practical applications such an expensive system was not useful. This paper describes a modified laser range-finder system which uses a simplified slope method. The accuracy of this two-point method is analyzed for several atmospheric conditions. Measurements with a described prototype system are presented.     

Scanning schemes in white light photoelasticity – Part II: Novel fringe resolution guided scanning scheme

Varied spatial resolution of isochromatic fringes over the domain influences the accuracy of fringe order estimation using TFP/RGB photoelasticity. This has been brought out in the first part of the work. The existing scanning schemes do not take this into account, which leads to the propagation of noise from the low spatial resolution zones. In this paper, a method is proposed for creating a whole field map which represents the spatial resolution of the isochromatic fringe pattern. A novel scanning scheme is then proposed whose progression is guided by the spatial resolution of the fringes in the isochromatic image. The efficacy of the scanning scheme is demonstrated using three problems – an inclined crack under bi-axial loading, a thick ring subjected to internal pressure and a stress frozen specimen of an aerospace component. The proposed scheme has use in a range of applications. The scanning scheme is effective even if the model has random zones of noise which is demonstrated using a plate subjected to concentrated load. This aspect is well utilised to extract fringe data from thin slices cut from a stereo-lithographic model that has characteristic random noise due to layered manufacturing.     

Source level reduction and sonar beam aiming in landing big brown bats (Eptesicus fuscus)

Reduction of echolocation call source levels in bats has previously been studied using set-ups with one microphone. By using a 16 microphone array, sound pressure level (SPL) variations, possibly caused by the scanning movements of the bat, can be excluded and the sonar beam aiming can be studied. During the last two meters of approach flights to a landing platform in a large flight room, five big brown bats aimed sonar beams at the landing site and reduced the source level on average by 7 dB per halving of distance. Considerable variation was found among the five individuals in the amount of source level reduction ranging from 4 to 9 dB per halving of distance. These results are discussed with respect to automatic gain control and intensity compensation and the combination of the two effects. It is argued that the two effects together do not lead to a stable echo level at the cochlea. This excludes a tightly coupled closed loop feed back control system as an explanation for the observed reduction of signal SPL in landing big brown bats.     

一种基于图像处理技术的视距估算方法

围绕视距估算，基于微光下的视觉探测方程和图像阈值对比度，利用图像处理技术和最小二乘数据拟合方法，提出了一种比较客观的夜视系统野外视距估算方法.为了验证该方法的有效性，针对六种夜视系统，分别进行了野外比较试验.试验结果表明：该方法有效地提高了微光夜视仪的视距检测速度，具有较高的估算准确度和很好的实用性.因此，该方法对于夜视系统性能分析具有科学的指导意义.     

Hand shape recognition

Automated hand shape recognition has been studied over the past decade and some commercial systems have been developed. Despite these advances, there is not much open public literature discussing the hand shape verification research. This study proposes a method by using quadtree techniques, which are able to recognize the hand shape image within an extremely short time. The geometrical shape of a hand is a biometric characteristic of human beings, although it is different even for a twin sibling. This study uses a parallel grating to project onto the backside of a hand. The parallel grating will be distorted by the curvature shape of the hand and processed by image processing techniques for recognition. This study also presents our recognition results of 100 students captured over a period of time.     

机载C波段全极化SAR海面风矢量反演理论研究及实验验证

机载全极化SAR海面风矢量反演研究对于近海岸复杂气象条件下风矢量探测具有重要意义. 本文从极化散射理论出发,通过分析全极化SAR探测数据与海面风矢量的关系, 设计了全极化SAR海面风矢量反演方案.依据机载SAR高机动性和全极化两个探测特点, 针对VV极化探测数据,提出了基于最大似然估计的海面风矢量反演方法,并设计了飞行实验方案; 针对VH极化探测数据,提出了通过带约束最优拟合的VH极化海面散射模型反演风速, 再利用CMOD5地球物理模型函数计算风向的海面风矢量反演方法. 利用机载全极化SAR探测的台风'海葵'边缘数据,开展了海面风矢量反演实验研究. 研究结果表明,两种风矢量反演方法均可不借助辅助信息,反演复杂气象条件下的海面风矢量. 前者反演风向、风速的均方根误差分别为18.0°, 1.8 m/s, 后者反演风向、风速的均方根误差分别为9.3°, 1.2 m/s,后者的反演精度优于前者. 这是因为VH极化归一化雷达截面与风向和雷达入射角无关,仅与风速密切相关, 更适合复杂气象条件下的海面风矢量反演. 关键词： 机载全极化SAR 海面风矢量 理论研究 实验验证     

Observing ice clouds with a Doppler cloud radar

Cloud systems containing ice particles (“ice clouds”) must be realistically represented in numerical models devoted to weather forecasting and climate projection. Nevertheless, such clouds have not been fully characterized. The RadOn method (after Radar Only) has been developed for estimating microphysical properties of ice clouds from Doppler cloud radar observations. This method is here updated and applied to observations conducted in 2003–2004 with the Doppler cloud radar RASTA at the SIRTA observatory (Palaiseau, near Paris).     

3D laser scanner system using high dynamic range imaging

Because of its high measuring speed, moderate accuracy, low cost and robustness in the industrial field, 3D laser scanning has been widely used in a variety of applications. However, the measurement of a 3D profile of a high dynamic range (HDR) brightness surface such as a partially highlighted object or a partial specular reflection remains one of the most challenging problems. This difficulty has limited the adoption of such scanner systems. In this paper, an optical imaging system based on a high-resolution liquid crystal on silicon (LCoS) device and an image sensor (CCD or CMOS) was built to adjust the image's brightness pixel by pixel as required. The radiance value of the image captured by the image sensor is constrained to lie within the dynamic range of the sensor after an adaptive algorithm of pixel mapping between the LCoS mask plane and image plane through the HDR imaging system is added. Thus, an HDR image was reconstructed by the LCoS mask and the CCD image on this system. The significant difference between the proposed system and a traditional 3D laser scanner system is that the HDR image was used to calibrate and calculate the 3D profile coordinate. Experimental results show that HDR imaging can enhance 3D laser scanner system environmental adaptability and improve the accuracy of 3D profile measurement.     

Radar monitoring of a wake vortex: Electromagnetic reflection of wake turbulence in clear air

This article deals with X-band radar trial campaigns in 2006 and 2007 at Orly Airport, and in June 2008 at Paris-CDG Airport. An X-band Doppler radar has been deployed to assess short range (inferior to 2000 m) wake vortex monitoring capabilities in all weather conditions (dry and wet conditions). Recorded data have been correlated with electromagnetic and fluid mechanical models of wake turbulences for better and more accurate understanding of roll-up radar cross section (RCS) and Doppler signature.