Half-metallicity characteristic at zincblende CrSb(0 0 1) surfaces and its interfaces with GaSb(0 0 1) and InAs(0 0 1)

Electronic and magnetic properties of the zincblende CrSb(0 0 1) surfaces and its interfaces with GaSb(0 0 1) and InAs(0 0 1) semiconductors are studied within the framework of the density-functional theory using the FPLAPW+lo approach. We found that the Cr-terminated surfaces retain the half-metallic character, while the half-metallicity is destroyed for the Sb-terminated surfaces due to surface states, which originate from p electrons. The phase diagram obtained through the ab-initio atomistic thermodynamics shows that at phase transition has occurred. Also the half-metallicity character is preserved at both CrSb/GaSb and CrSb/InAs interfaces. The conduction band minimum (CBM) of CrSb in the minority spin case lies about 0.63 eV above that of InAs, suggesting that the majority spin can be injected into InAs without being flipped to the conduction bands of the minority spin. On the other hand the CrSb/GaSb interface has a greater valence band offset (VBO) compared with the CrSb/InAs interface and the minority electrons have lower contribution in the injected currents and hence more efficient spin injection into the GaSb semiconductor. Thus the CrSb/GaSb and CrSb/InAs heterojunctions can be useful in the field of spintronics.     

ZnTe/GaAs(2 1 1)B heterojunction valence band discontinuity measured by X-ray photoelectron spectroscopy

Thin ZnTe layers were grown by molecular beam epitaxy on single crystal GaAs(2 1 1)B substrates. Reflection high energy electron diffraction monitored the deoxidation of substrate and entire growth process. Valence band offset was calculated with X-ray photoelectron spectroscopy. Also interface formation of the ZnTe/GaAs was studied. Analysis shows that interface is abrupt and calculated valance band offset is 0.25 ± 0.1 eV and indicates type I alignment. The experimental result agrees well with the theoretical predictions involving interface dipole effect as well as electron affinity rule.     

First Principles Study of Half Metallic Properties of VSb Surface and VSb/GaSb (001) Interface

The structural, electronic, and magnetic properties of VSb in zincblende, andNiAs phases, VSb (001) film surfaces and its interfaces with GaSb (001) havebeen investigated within the framework of the density functional theoryusing the FPLAPW+lo approach. The NiAs structure is more stable than the ZB phase, ZB VSb is found to a half-metallic ferromagnetic. The V-terminated surfaces retain the half-metallic character, while the half-metallicity is destroyed for Sb-terminated surfaces due to surface states, which originate from p electrons. The phase diagram obtained through the ab-initio atomisticthermodynamics shows that the formation energy of ZB VSb is about 0.1 Ryd.The half-metallicity character is also preserved at VSb/GaSb (001) interface.The conduction band minimum (CBM) of VSb in the minority spin case liesabout 0.47 eV above that of GaSb, suggesting that the majority spin can beinjected into GaSb without being flipped to the conduction bands of the minority spin.     

Theoretical study of hydrogen adsorption on the GaN(0 0 0 1) surface

Ab initio density functional theory, using the B3LYP hybrid functional with all-electron basis sets, has been applied to the adsorption of H on the (0 0 0 1) surface of wurtzite GaN. For bulk GaN, good agreement is obtained with photoemission and X-ray emission data for the valence band and for the Ga 3d and N 2s shallow core levels. A band gap of E_g = 4.14 eV is computed vs the experimental value (at 0 K) of 3.50 eV. A simple model, consisting of a (2 × 2) structure with 3/4-monolayer (ML) of adsorbed H, is found to yield a density of states in poor agreement with photoemission data for H adsorbed on surfaces prepared by ion bombardment and annealing. A new model, consisting of co-adsorbed Ga (1/4 ML) and H (1/2 ML), is proposed to account for these data.     

Structural stability and electronic structure of iron adsorption on the GaN(0 0 0 1) surface

In this work, we have investigated by means of first-principles spin-polarized calculations, the electronic and magnetic properties of iron (Fe) adsorption and diffusion on the GaN(0 0 0 1) surface using density functional theory (DFT) within a plane-wave pseudopotential scheme. In the surface adsorption study, results show that the most stable positions of a Fe adatom on GaN(0 0 0 1) surface are the H3 sites and T4 sites, for low and high Fe coverage respectively. We found that the Fe-H3 2 × 2 surface reconstruction exhibits a half-metallic behavior with a spin band gap and stable ferromagnetism ordering, which is a desirable property for high-efficiency magnetoelectronic devices. In addition, confirming previous experimental results, we found that the iron monolayers present a ferromagnetic order and a large thermal stability. This is interesting from a theoretical point of view and for its technological applications.     

Ab initio calculations and dynamical properties of the Se:InP(1 1 0) and Te:InP(1 1 0)

We present results of ab initio theoretical investigations of the structural and dynamical properties of the Se:InP(1 1 0) and Te:InP(1 1 0) surfaces, by employing the plane wave pseudopotential method, the local density approximation of the density functional theory, and a linear response scheme. For both adsorbates we have used the so-called exchange geometry (the chalcogen atoms replacing P in the top two atomic layers). A detailed discussion is provided of the relaxed surface geometry and phonon dispersion curves along two principal symmetry directions. It is found that the adsorption of Se (or Te) atoms on InP(1 1 0) leads to phonon modes in the acoustic-optical gap region for bulk InP. The characteristic atomic displacement patterns of selected phonon modes on these surfaces have been compared and contrasted with those on the clean InP(1 1 0) surface.     

Theoretical study of the electronic structure of the Si3N4(0 0 0 1) surface

Density functional theory has been applied to a study of the electronic structure of the ideally-terminated, relaxed and H-saturated (0 0 0 1) surfaces of β-Si₃N₄ and to that of the bulk material. For the bulk, the lattice constants and atom positions and the valence band density of states are all in good agreement with experimental results. A band gap of 6.7 eV is found which is in fair accord with the experimental value of 5.1-5.3 eV for H-free Si₃N₄. Using a two-dimensionally-periodic slab model, a π-bonding interaction is found between threefold-coordinated Si and twofold-coordinated N atoms in the surface plane leading to π and π* surface-state bands in the gap. A surface-state band derived from s-orbitals is also found in the gap between the upper and lower parts of the valence band. Relaxation results in displacements of surface and first-underlayer atoms and to a stronger π-bonding interaction which increases the π-π* gap. The relaxed surface shows no occupied surface states above the valence band maximum, in agreement with recent photoemission data for a thin Si₃N₄ film. The π* band, however, remains well below the conduction band minimum (but well above the Fermi level). Adsorbing H at all dangling-bond sites on the ideally-terminated surface and then relaxing the surface and first underlayer leads to smaller, but still finite, displacements in comparison to the clean relaxed surface. This surface is more stable, by about 3.67 eV per H, than the clean relaxed surface.     

First-principles study on the half-metallicity of zinc-blende CrP(1 1 0) surface

We have investigated the half-metallicity and magnetism at the (1 1 0) surface of CrP by using the all-electron full-potential linearized augmented plane wave (FLAPW) method within the generalized gradient approximation (GGA). From the calculated local density of states (LDOS), we found that the (1 1 0) surface of CrP preserves the half-metallicity, but the band gaps (∼1.1 eV) of the minority states for the surface Cr and P atoms are much reduced from the bulk value (∼1.9 eV). The magnetic moment of the P is coupled antiferromagnetically to that of the Cr. The magnetic moment of surface Cr atom is calculated to be 3.31μ_B which is increased by 10% compared to the bulk value, 3.00μ_B.     

Study of the early stages of Cr/6H-SiC(0 0 0 1) interface formation

The early stages of the Cr/6H-SiC(0 0 0 1) interface formation at room temperature were investigated using XPS, LEED and work function (WF) measurements. Upon stepwise Cr evaporation in UHV up to a thickness of 5-10 monolayers (ML) at RT, the binding energy of the XPS Cr 2p_3/2 core level peak shifted from 576.1 eV, at submonolayer coverage, to 574.7 eV (corresponding to metallic Cr) for the final Cr deposit, while the binding energies of the substrate XPS core level peaks remained stable. The WF exhibited a steep decrease of about 0.5 eV from the initial SiC substrate value, upon submonolayer coverage, but then increased gradually to saturation at a value of about 4.8 eV (polycrystalline Cr film with some chemisorbed oxygen). The growth of the ultrathin film was via 3D-cluster formation. The height of the Schottky barrier for the Cr/6H-SiC(0 0 0 1) contact was found by XPS to be 0.5 ± 0.1 eV. The results, generally, indicate the absence of any extended interfacial silicide-like interaction at RT.     

First-principles study of CoO films on MnO (1 1 1): Stability and interfacial structure

Based on the generalized gradient approximation, full potential linearized augmented plane-wave (FP-LAPW) calculations have been performed to study the stability and the interfacial structure of CoO/MnO (1 1 1). The surface energy, the strain energy and the binding energy are calculated and discussed. The calculations revealed that the CoO/MnO (1 1 1) is a stable interface structure. Also examined were the electronic properties and the atomic spin magnetic moments of the interface. It was found that the interface exhibited half-metallic property and the atomic magnetic moments were obviously weakened at the interface for metal atoms compared with the corresponding magnetic moments in bulk material.     

Surface electronic structure of the (3 × 2) reconstruction induced by Yb on a Si(1 1 1) surface

We have investigated the electronic structure of the Yb/Si(1 1 1)-(3 × 2) surface using angle-resolved photoelectron spectroscopy. Five surface states have been identified in the gap of the bulk band projection. Among these five surface state, the dispersions of three of them agree well with those of the surface states of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. The dispersions of the two other surface states agree well with those observed on the Ca/Si(1 1 1)-(3 × 2) surface, whose basic structure is the same as that of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. Taking these results into account, we conclude that the five surface states observed in the band gap originate from the orbitals of Si atoms that form a honeycomb-chain-channel structure.     

XPS and UPS study on band alignment at Pt-Zn-terminated ZnO(0 0 0 1) interface

The interface between Pt and Zn-terminated ZnO(0 0 0 1) was investigated by X-ray and ultra violet photoelectron spectroscopy in order to examine electronic band alignment. An angle-resolved X-ray photoelectron spectroscopy measurement of the clean ZnO(0 0 0 1) surface has revealed a downward band bending by 0.25 eV. The results of the valence band analysis show that the work function and the valence band maximum of clean ZnO(0 0 0 1) were 4.49 eV and 2.79 eV, respectively. Platinum was then deposited in several deposition steps onto a clean ZnO(0 0 0 1) surface up to 0.6 nm in thickness. After the deposition, the binding energy of Zn 2p doublet peak was shifted towards lower value by 0.77 eV, and the measured work function changed to 5.51 eV. As a result, the Schottky barrier height of Pt/ZnO(0 0 0 1) interface was 1.11 eV.     

Electronic properties of clean unreconstructed 6H-SiC(0 0 0 1) surfaces studied by angle resolved photoelectron spectroscopy

The properties of the clean and unreconstructed 6H-SiC(0 0 0 1) and 6H-SiC surfaces were investigated by means of angle-resolved photoelectron spectroscopy (ARPES). These highly metastable surfaces were prepared by exposing hydrogen terminated surfaces to a high flux of synchrotron radiation. On both surfaces we find a band of surface states with 1 × 1 periodicity assigned to unsaturated Si and C dangling bonds located at 0.8 eV and 0.2 eV above the valence band maximum, respectively. Both states are located below the Fermi level. The dispersion of the surface bands amounts to 0.2 eV for the Si derived band and 0.7 eV for C derived band. It is suggested that the electronic properties of these surfaces are governed by strong correlation effects (Mott-Hubbard metal insulator transition). The results for the (0 0 0 1) surface are directly compared to Si-rich (√3 × √3)R30° reconstructed surface. Distinct differences in electronic structure of the (√3 × √3)R30° and 1 × 1 surfaces are observed.     

STS investigations of temperature dependence of Au(1 1 1) surface state energy position

High temperature scanning tunneling spectroscopy (HT-STS) was used to investigate the electronic structure of Au(1 1 1) at different temperatures in the energy range 0-1 eV below the Fermi level. We concentrated on the influence of temperature on the Shockley surface state (SS) appearing on noble metals surface due to a surface projected bulk bang gap in [1 1 1] direction. The influence of temperature on the projected band gap edge (BE) was also investigated. The experiment was carried out in the temperature range 294-580 K. As the result of the experiment a delicate shift of the SS and the BE in direction of the Fermi level was reported.     

Stable atomic structure and magnetism of Pt–Cr binary surface alloys on Pt(0 0 1): First-principle calculations

The possibility of Pt–Cr surface alloys formation on Pt(0 0 1) was investigated and their magnetism was calculated by the full-potential linearized augmented plane wave (FLAPW) method with eight different atomic configurations. The most stable structure was calculated to be the Pt-segregated L1₂ ferromagnetic surface alloy. A₃B types (L1₂ or D0₂₂) were more stable compared to AB types (L1₀). It implies that the A₃B type surface alloys may be formed when depositing a monolayer of Cr on Pt(0 0 1). It was found from the total energy calculations that there exists a strong tendency of the Pt segregation. The segregation further stabilizes the surface alloy significantly. The work function of the most stable surface alloy was calculated to be 6.02 eV and the magnetic moment of the surface Cr was much enhanced to 3.3 μ_B. It is a quite interesting finding that the coupling between Cr and Pt atoms on the surface plane is ferromagnetic in the Pt-segregated L1₂ ferromagnetic surface alloy, while the coupling is antiferromagnetic in the bulk.     

High temperature STM/STS investigations of resonant image states on Au(1 1 1)

Scanning tunneling microscopy (STM) and spectroscopy (STS) were used to study the electronic structure of Au(1 1 1) surface in the range of 2-5.5 eV above the Fermi level. In this paper, we concentrate firstly on the position of the upper band gap edge (BE) existing in [1 1 1] direction in Au(1 1 1) and secondly on the position of the resonant image potential surface state (RIS) located in the bulk states approximately 1.1 eV above BE. The experiment was carried out in UHV at two temperatures 294 K and 580 K. Our high temperature STS (HT-STS) results clearly show the presence of RIS and BE local maxima at both temperatures. What is more, a slight shift towards the Fermi level of BE and RIS was observed. Those shifts were the consequence of the change of [1 1 1] band gap and lowering gold work function due to the thermal extension of interatomic distances. Finally, estimation of the work function was given at 294 K and 580 K.     

Adsorption of water on TiN (1 0 0), (1 1 0) and (1 1 1) surfaces: A first-principles study

We use first-principles density functional theory-based calculations in the analysis of the interaction of H₂O with (1 0 0), (1 1 0) and (1 1 1) surfaces of TiN, and develop understanding in terms of surface energies, polarity of the surface and chemistry of the cation, through comparison with H₂O adsorption on ZrN. While water molecule physisorbs preferentially at Ti site of (1 0 0) and (1 1 1) surfaces, it adsorbs dissociatively on (1 1 0) surface of TiN with binding stronger than almost 1.32 eV/molecule. Our analysis reveals the following general trends: (a) surfaces with higher energies typically lead to stronger adsorption, (b) dissociative adsorption of H₂O necessarily occurs on a charge neutral high energy surface and (c) lower symmetry of the (1 1 0) plane results in many configurations of comparable stability, as opposed to the higher symmetry (1 0 0) and (1 1 1) surfaces, which also consistently explain the results of H₂O adsorption on MgO available in literature. Finally, weaker adsorption of H₂O on TiN than on ZrN can be rationalized in terms of greater chemical stability of Ti arising from its ability to be in mixed valence.     

On the vibrational behaviour of cyanide adsorbed at Pt(1 1 1) and Pt(1 0 0) surfaces in alkaline solutions

This communication deals with the vibrational behaviour of cyanide adlayers formed on Pt(1 1 1) and Pt(1 0 0) surfaces in the electrochemical environment. In situ FTIR spectroscopy can be employed to follow the potential dependence of the C-N stretching frequency in acidic electrolytes with quite a low uncertainty. Owing to the stability of the cyanide adlayer in alkaline solutions, experiments performed in NaOH medium are usually perturbed by the significant overlapping of the reference and the sample FTIR spectra. Deconvolution of the spectra was carried out assuming a Lorentz oscillator. The procedure allowed to confirm that two potential regions with different band centre frequency tuning coexist for Pt(1 1 1)-CN in perchloric acid medium. Conversely, in the alkaline electrolyte a single tuning rate for the band position was found for both surfaces studied. The lack of reorientation of the C-N molecular axis together with the occurrence of a certain screening effect of negatively charged hydroxyl anions on the electric field at the interface could be at the origin of the different behaviour displayed in both electrolytic media.     

A density functional study of atomic oxygen and water molecule adsorption on Ni(1 1 1) and chromium-substituted Ni(1 1 1) surfaces

Density functional theory (DFT) for generalized gradient approximation calculations has been used to study the adsorption of atomic oxygen and water molecules on Ni(1 1 1) and different kind of Ni-Cr(1 1 1) surfaces. The fcc hollow site is energetically the most favorable for atomic oxygen adsorption and on top site is favorable for water adsorption. The Ni-Cr surface has the highest absorption energy for oxygen at 6.86 eV, followed by the hcp site, whereas the absorption energy is 5.56 eV for the Ni surface. The Ni-O bond distance is 1.85 Å for the Ni surface. On the other hand, the result concerning the Ni-Cr surface implies that the bond distances are 1.93-1.95 Å and 1.75 Å for Ni-O and Cr-O, respectively. The surface adsorption energy for water on top site for two Cr atom substituted Ni-Cr surface is 0.85 eV. Oxygen atoms prefer to bond with Cr rather than Ni atoms. Atomic charge analysis demonstrates that charge transfer increases due to the addition of Cr. Moreover, a local density of states (LDOS) study examines the hybridization occurring between the metal d orbital and the oxygen p orbital; the bonding is mainly ionic, and water bonds weakly in both cases.