The magnetic proximity effect in a ferrimagnetic Fe3O4 core/ferrimagnetic γ-Mn2O3 shell nanoparticle system

We report the magnetic proximity effect in a ferrimagnetic Fe(3)O(4) core/ferrimagnetic γ-Mn(2)O(3) shell nanoparticle system, in terms of an enhancement of the Curie temperature (T(c)) of the γ-Mn(2)O(3) shell (~66 K) compared to its bulk value (~40 K), and the presence of magnetic ordering in its so-called paramagnetic region (i.e. above 66 K). The ferrimagnetic nature of both core and shell has been found from a neutron diffraction study. The origin of these two features of the magnetic proximity effect has been ascribed to the proximity of the γ-Mn(2)O(3) shell with a high-T(c) Fe(3)O(4) core (~858 K in bulk form) and an interface exchange coupling between core and shell. Interestingly, we did not observe any exchange bias effect, which has been interpreted as a signature of a weak interface exchange coupling between core and shell. The present study brings out the importance of the relative strength of the interface coupling in governing the simultaneous occurrence of the magnetic proximity effect and the exchange bias phenomenon in a single system.     

Phase Diagram of Antiferromagnetically Exchange-Coupled Bilayer

Magnetic hysteresis properties of antiferromagnetically exchange-coupled bilayer structures, in which the two magnetic layers have different magnetic parameters and thicknesses, are studied within the framework of the Stoner-Wohlfarth model. Analytical expressions for the switching fields corresponding to the linear magnetic states are obtained. By adjusting the magnetic parameters or thicknesses of layers, nine different types of easy-axis hysteresis loops may exist. The phase diagram of easy-axis hysteresis loops is mapped in the k1 and k2 plane, where k1 and k2 are the ratios of magnetic anisotropy to the interlayer exchange coupling of the two magnetic layers, respectively.     

Designing magnetics of capped perpendicular media with minor-loop analysis

A novel method of analyzing the switching field distribution (SFD) and magnetic correlation length of perpendicular magnetic recording media that uses major and minor magnetization loops is proposed. By applying the analysis to a series of capped perpendicular media, we found that a thick capping layer with a low saturation magnetization effectively reduced SFD without rapidly increasing the magnetic correlation length. Transmission electron microscope observation suggests that the SFD is narrowed by the increased uniformity of intergranular exchange coupling via the thick capping layer. Evaluations of recording characteristics demonstrated a close correlation between narrower SFDs and improved recording performance. Reducing exchange coupling dispersion is a clear solution for improving the performance of recording media.     

Magnetic properties of a ferrimagnetic core/shell nanocube Ising model: A Monte Carlo simulation study

Monte Carlo simulation has been used to study the magnetic properties and hysteresis loops of a single nanocube, consisting of a ferromagnetic core of spin- surrounded by a ferromagnetic shell of spin-1 with antiferromagnetic interface coupling. We find a number of characteristic phenomena. In particular, the effects of the shell coupling and the interface coupling on both the compensation temperature and the magnetization profiles are investigated. The effects of the interface coupling on the hysteresis loops are also examined.     

Specific features of magnetic properties of ferrihydrite nanoparticles of bacterial origin: A shift of the hysteresis loop

The results of the experimental investigation into the magnetic hysteresis of systems of superparamagnetic ferrihydrite nanoparticles of bacterial origin have been presented. The hysteresis properties of these objects are determined by the presence of an uncompensated magnetic moment in antiferromagnetic nanoparticles. It has been revealed that, under the conditions of cooling in an external magnetic field, there is a shift of the hysteresis loop with respect to the origin of the coordinates. These features are associated with the exchange coupling of the uncompensated magnetic moment and the antiferromagnetic “core” of the particles, as well as with processes similar to those responsible for the behavior of minor hysteresis loops due to strong local anisotropy fields of the ferrihydrite nanoparticles.     

Microstructural and magnetic properties of passivated Co nanoparticle films

Co nanoparticle films were prepared by plasma–gas-condensation-type particle beam deposition system. High-resolution transmission electron microscopy images show that the Co nanoparticles have a very narrow size distribution with an average diameter of 20 nm, and each of the Co nanoparticles is covered with an 3 nm layer of CoO. Hysteresis loops of the films after field-cooling in a 5 T magnetic field are greatly shifted, which can be attributed to the exchange bias effect caused by the interfacial exchange coupling between the CoO shell and the Co core. The zero field cooled films show several prominent properties, such as a quite large coercive field, a small remanence and their abnormal dependences on temperature. All these observations can be attributed to the existence of an exchange bias effect within each single Co nanoparticle even without a field-cooling process.     

Generation of rectangular prismatic dislocation loops in shells and cores of composite nanoparticles

A theoretical model has been proposed for describing the relaxation of misfit stresses in a spherically symmetric composite core-shell nanoparticle due to the generation and expansion of rectangular prismatic dislocation loops at the internal and external interfaces. The critical conditions of the formation of these loops have been calculated for nanoparticles consisting of a relatively massive core and a thin shell. It has been shown that the generation of dislocation loops is possible when the misfit of the lattice parameters of the core and shell of the nanoparticle exceeds a critical value that depends on the nanoparticle radius, the shell thickness, the loop formation position, and the shape of loops. This condition holds for a loop in the shell when the shell thickness either lies in a specific range of small values or (for a larger misfit) is less than a critical value. For the generation of loops in the core, the shell thickness should exceed a critical value. The dislocation loops elongated along the core-shell interface are formed more readily. As the shell thickness increases at a fixed nanoparticle radius, the energetically more favorable generation of a dislocation loop occurs first from the free surface into the bulk of the shell, then from the interface into the shell, and finally from the interface into the core of the nanoparticle.     

Formation of mismatched layers in pentagonal nanorods

A new mechanism is presented to model the relaxation phenomena in pentagonal nanorods (PNRs) – elongated multiple twinned crystals. It is demonstrated that a shell possessing crystal mismatch with respect to the PNR core region will reduce the internal energy of the PNR associated with wedge disclinations of strength 7°20′ lying along the PNR axis. We predict the existence of an optimal magnitude for core/shell crystal lattice mismatch and an optimal shell thickness providing maximum energy release for this mechanism of mechanical stress relaxation. The considered relaxation mechanism can be realized by the diffusion of impurities in the shell region without change of the PNR radius or by growth of a thin mismatched shell layer with the corresponding thickening of PNR. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental analysis of the fast magnetization dynamics in high perpendicular anisotropy Co/Pt nanostructures

We present preliminary results for magnetization dynamics in high perpendicular anisotropy Co/Pt cross-shaped nanostructures submitted to a single/train out-of-plane field pulses. For this, a fabrication process has been developed to obtain high-quality microwave test structures. Using extraordinary Hall effect, we measure quasistatic hysteresis loops while applying either a single or a train of field pulses of given amplitude (32 mT at maximum), variable duration (0.2–10 ns) and repetition frequency (1–100 kHz). We get that field pulses affect only one side of the hysteresis loops without any clear change in the squareness of the loop. Such behavior can be most probably attributed to pulse-induced nucleation of reverse domains in the cross area. The measured shift in coercive field decreases linearly with the logarithm of the pulse duration and two switching regimes that get connected for pulse duration around 1 ns have been observed. Switching probability with single pulse showed that field pulse of 10 ns and 32 mT of magnitude has the same effect of 2 mT static fields.     

Influence of surface roughness and chemisorption on magnetic hysteresis curves of a Ni(110) surface observed by spin-resolved inverse photoemission

Using the high spin asymmetry in inverse photoemission of the Ni d-band just above the Fermi level as an indicator of surface magnetization, we have measured hysteresis curves of the (110) surface of nickel. Nearly rectangular hysteresis loops indicate a well-defined behavior of the surface magnetization of the picture-frame single crystal with sides along 110 directions. The influence of geometrical order and chemisorption of O, S, and CO on the shape of the hysteresis loops has been investigated. We found a significant reduction of the coercive force (about 10%) if the clean high-quality (110) surface is disordered on an atomic scale by ion bombardment or low-coverage chemisorption.     

Similarity rules of magnetic minor hysteresis loops in Fe and Ni metals

We have studied similarity rules of quasistatic minor hysteresis loops for Fe and Ni single crystals in the wide temperature range from 10 to 600 K. Two similarity rules of M_R*/M_a*∼3/4 and W_R*/W_F*∼1/6, were found in a medium field range where irreversible movement of Bloch walls plays a crucial role for magnetization; M_a*, M_R*, W_F*, and W_R* are magnetization, remanence, hysteresis loss, and remanence work of a minor hysteresis loop. The similarity rules hold true, being almost independent of kinds of ferromagnets, applied stress, and temperature. The origin was discussed from the viewpoint of pinning effects due to dislocations as well as eddy current effects which become predominant at low temperatures for samples with low dislocation density.     

Magnetic properties of electron-doped Y1−xCexMnO3 compounds

Cerium-doped Y_1−xCe_xMnO₃ compounds have been prepared in single-phase form for x=0 to 0.10. X-ray diffraction (XRD) patterns could be analyzed by using P6₃cm space group. Temperature variations of ac susceptibility and magnetization measurements show that these Ce-doped materials exhibit weak ferromagnetic transition. The observed ferromagnetic transition is attributed to the double exchange ferromagnetic interaction between Mn²⁺ and Mn³⁺ ions due to electron doping. The M–H loops exhibit hysteresis along with linear contribution and were analyzed based on bound magnetic polaron (BMP) model. Increase in saturation magnetization and decrease in BMP concentrations have been observed with increase in Ce doping.     

Effects of size and surface anisotropy on thermal magnetization and hysteresis in the magnetic clusters

Based on Monte Carlo simulation, the spin configurations, thermal magnetization and hysteresis loops of the clusters coated by the surface shell with radial anisotropy are studied. Interestingly, a new multidomain containing a few of subdomains whose easy directions are along those of the configurational anisotropy, a magnetization curve in steps and a first order phase transition from the single domain to the multidomain in the thermal and field magnetization processes, are found, which is as a result of the interplay of the configurational anisotropy, the size effect, the surface anisotropy, the applied field and the thermal fluctuation. In this first order transition, we find a critical temperature, a critical surface anisotropy and a critical size. The simulated temperature dependence of the coercivity of the cluster with the surface anisotropy can be fitted by H_c (T)=H_c (0)(1-C_αT^α) with low value of α, which explains well the experimental results of the nanoparticles. Moreover, it is found that the hysteresis loops and coercivity are strongly affected by the cluster size and the thickness of the surface layer.     

Effects of the trimodal random field on the magnetic properties of a spin-1 Ising nanotube

In this work, the hysteresis behavior of a nanotube, consisting of a ferromagnetic core of spin-1 atoms surrounded by a ferromagnetic shell of spin-1 atoms with ferro-or anti-ferromagnetic interracial coupling is studied in the presence of a random magnetic field. Based on a probability distribution method, the effective-field theory has been used to investigate the effects of the random magnetic field, the interfacial coupling constant, and the temperature on the hysteresis loops of the nanotube. Some characteristic behaviors have been found, such as the existence of double or triple hysteresis loops for appropriate values of the system parameters. The remanent magnetization and the coercive field, as functions of the temperature, are examined.     

Magnetostriction relative to pretransition in Ni50.5Mn24.5Ga25 single crystal

The strain behaviors as well as the structural and magnetic changes relative to the pretransition in the Ni_50.5Mn_24.5Ga₂₅ single crystals have been characterized by various methods, such as pretransition strain, magnetostriction, magnetization measurements, and TEM observations. A large magnetostriction up to 505 ppm measured in the [001] direction of the sample is obtained at the pretransition temperature with only a low magnetic field of about 1 kOe applied along the [010] direction. We found that not only the pretransition strain pronounces a more large change, but also the magnetostriction at a certain temperature exhibits a more large magnitude for field applied along the [010] direction than with field along the [001] direction. It is concluded that the magnetoelastic interaction is responsible for the premartensitic transition, and the magnetoelastic interaction in the [010] direction is stronger than that in the [001] direction.     

Thermal Stability of CoFe/Cu/CoFe/IrMn Top Spin Valve

We present a study of thermal stability of the top spin valve with a structure of seed Ta （Snm）/Co75Fe25 （5 nm ） /Cu （2.5 nm） /Co75Fe25 （5 nm ） /Ir20Mn80（12 nm） /cap Ta （8 nm） deposited at room temperature by magnetron sputtering. A vibrating sample magnetometer fixed with a heater was used to record the magnetic hysteresis loops at variational temperatures and x-ray diffraction was performed to characterize the structure of the multilayer. The exchange field Hex and the coercivity of the pinned CoFe layer Hop decrease monotonically with increasing temperature. The coercivity of the free CoFe layer Hcf in the spin valve shows a maximum at 498K. The temperature dependences of Hex, Hop and Hcf have also been discussed.     

Macroscale alignment of CdSe/CdS nanorods by porous anodic alumina templates

Centimeter‐scale assemblies of highly ordered CdSe/CdS core‐shell nanorods have been successfully fabricated by infiltration of the nanorods into the pores of a transparent porous anodic alumina membrane. The high degree of the nanorod ordering is proved by the demonstration of both highly polarized PL and absorption of the aligned nanorods. The measured PL linear polarization degree is 53%. We have found that both the elongated CdS shell and the nearly spherical CdSe core exhibit a strong dependence of absorption on polarization angle with respect to the nanorod axis. We conclude that both CdS shell and CdSe core absorb more efficiently light with polarization along the axis of the nanorod. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Soft X-ray resonant magnetic scattering studies on Fe/CoO exchange bias system

We have used soft X-ray resonant magnetic scattering (XRMS) to search for the presence of an effective ferromagnetic moment belonging to the antiferromagnetic (AF) layer which is in close contact with a ferromagnetic (F) layer. Taking advantage of the element specificity of the XRMS technique, we have measured hysteresis loops of both Fe and CoO layers of a CoO(40 Å)/Fe (150 Å) exchange bias bilayer. From these measurements we have concluded that the proximity of the F layer induces a magnetic moment in the AF layer. The F moment of the AF layer has two components: one is frozen and does not follow the applied magnetic field and the other one follows in phase the ferromagnetic magnetization of the F layer. The temperature dependence of the F components belonging to the AF layer is shown and discussed.     

Analysis of exchange bias effect of NiO+NiFe2O4 composites

Exchange bias (EB) and magnetic properties of ferrimagnetic (FI) NiFe₂O₄ and antiferromagnetic (AFM) NiO bulk composites, prepared by a chemical co-precipitation and post-thermal decomposition method from Fe-doped NiO matrix, have been investigated. Enhanced coercivities and shifted hysteresis loops are still observed for these samples after field cooling. But the vertical magnetization shifts are not observed. In comparison with the bulk samples, a NiO/10% NiFe₂O₄ nanocomposite was also prepared via direct mixture, in which both the horizontal and vertical shift in the hysteresis loops are observed at 10 K. The observed phenomena are explained in terms of interfacial exchange interaction between the two phases and the finite-size effect, respectively.     

Quantum Monte Carlo simulation of the ferroelectric or ferrielectric nanowire with core shell morphology

By using the Quantum Monte Carlo simulation; the electric properties of a nanowire, consisting of a ferroelectric core of spin-1/2 surrounded by a ferroelectric shell of spin-1/2 with ferro- or anti-ferroelectric interfacial coupling have been studied within the framework of the Transverse Ising Model (TIM). We have examined the effects of the shell coupling J_s, the interfacial coupling J_Int, the transverse field Ω, and the temperature T on the hysteresis behavior and on the electric properties of the system. The remanent polarization and the coercive field as a function of the transverse field and the temperature are examined. A number of characteristic behavior have been found such as the appearance of triple hysteresis loops for appropriate values of the system parameters.