Optical properties of hexagonal boron nitride thin films deposited by radio frequency bias magnetron sputtering

The optical properties of hexagonal boron nitride(h-BN) thin films were studied in this paper.The films were characterized by Fourier transform infrared spectroscopy,UV-visible transmittance and reflection spectra.h-BN thin films with a wide optical band gap Eg(5.86 eV for the as-deposited film and 5.97 eV for the annealed film) approaching h-BN single crystal were successfully prepared by radio frequency(RF) bias magnetron sputtering and post-deposition annealing at 970 K.The optical absorption behaviour of h-BN films accords with the typical optical absorption characteristics of amorphous materials when fitting is made by the Urbach tail model.The annealed film shows satisfactory structure stability.However,high temperature still has a significant effect on the optical absorption properties,refractive index n,and optical conductivity σ of h-BN thin films.The blue-shift of the optical absorption edge and the increase of Eg probably result from stress relaxation in the film under high temperatures.In addition,it is found that the refractive index clearly exhibits different trends in the visible and ultraviolet regions.Previous calculational results of optical conductivity of h-BN films are confirmed in our experimental results.     

Structures and optical properties of tungsten oxide thin films deposited by magnetron sputtering of WO_3 bulk:Effects of annealing temperatures

Tungsten oxide thin films were deposited on glass substrates by the magnetron sputtering of WO3 bulk at room temperature. The deposited films were annealed at different temperatures in air. The structural measurements indicate that the films annealed below 300℃ were amorphous, while the films annealed at 400℃ were mixed crystalline with hexagonal and triclinic phases of WO3. It was observed that the crystallization of the annealed films becomes more and more distinct with an increase in the annealing temperature. At 400℃, nanorod-like structures were observed on the film surface when the annealing time was increased from 60 min to 180 min. The presence of W=O stretching, W–O–W stretching, W–O–W bending and various lattice vibration modes were observed in Raman measurements. The optical absorption behaviors of the films in the range of 450–800 nm are very different with changing annealing temperatures from the room temperature to 400℃. After annealing at 400℃, the film becomes almost transparent. Increasing annealing time at 400℃ can lead to a small blue shift of the optical gap of the film.     

Convenient and inexpensive determination of optical constants and film thickness of blended organic thin film

This work presents the study of optical constants and film thickness of blended organic thin films, emphasizing on the modeling procedure with modified genetic algorithm aided by absorption or transmittance spectra of both pure materials and the blends. Taking the blending of copper phthalocyanine(Cu Pc) and fullerene(C60) as an example, a simple, convenient and low-cost method for the determination of the optical constants and film thickness of blended organic thin films was demonstrated. New scheme for optical modeling of blended organic thin film was proposed by introducing peak energies of Cody-Lorentz oscillators of the pure materials, which were determined by fitting the film absorption of pure materials. These oscillators of pure materials could be recognized in the transmittance spectrum of their blends, and were further used as the initial searching ranges in the simulation of blended films. As a result, the constraint bounds of the unknown parameters were significantly reduced and modeling efficiency as well as fitting accuracy was improved. For instance, the fitting of the transmittance curves of blended films with different blending ratios reached reliable results in comparison with extinction coefficients obtained from experiment.     

Influence of annealing treatment on the luminescent properties of Ta:β-Ga_2O_3 single crystal

Ta~(5+)doped β-Ga_2O_3 single crystals were grown by using the optical floating zone method, and then annealed in the air and nitrogen gas at 1400℃ for 20 hours.The transmittance spectra, photoluminescence(PL), x-ray irradiation spectra, and PL decay profiles of the samples were measured at room temperature.The relevant results show that the optical transmittance of the samples annealed in the air or nitrogen gas was improved.By drawing the(ahv)~2–hv graph,it can be seen that the band gap decreased after being annealed in the air, but increased in nitrogen gas.The PL spectra and x-ray irradiation spectra show that the luminescent intensity of the sample annealed in the air increased substantially,while decreased for the sample annealed in nitrogen.The PL decay time of the Ta:β-Ga_2O_3 annealed in the air increased significantly compared with that of the Ta:β-Ga_2O_3 sample without annealing, but the tendency after annealing in nitrogen gas was opposite.     

Gap States of ZnO Thin Films by New Methods:Optical Spectroscopy,Optical Conductivity and Optical Dispersion Energy

The optical reflectance and transmittance spectra in the wavelength range of 300–2500 nm are used to compute the absorption coefficient of zinc oxide films annealed at different post-annealing temperatures 400, 500 and 600°C.The values of the cross point between the curves of the real and imaginary parts of the optical conductivity ɑ_1 and ɑ_1 with energy axis of films exhibit values that correspond to optical gaps and are about 3.25–3.3 eV. The maxima of peaks in plots dR/dλ and dT/dλ versus wavelength of films exhibit optical gaps at about 3.12–3.25 eV.The values of the fundamental indirect band gap obtained from the Tauc model are at about 3.14–3.2 eV. It can be seen that films annealed at 600°C have the minimum indirect optical band gap at about 3.15 eV. The films annealed at 600°C have Urbach's energy minimum of 1.38 eV and hence have minimum disorder. The dispersion energy d of films annealed at 500°C has the minimum value of 43 eV.     

Temperature-dependent photoluminescence on organic-inorganic metal halide perovskite CH_3NH_3PbI_(3-x)Cl_x prepared on ZnO/FTO substrates using a two-step method

Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH_3NH_3Pb I_(3-x)Cl_x films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was~140 K. The films' exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH_3NH_3Pb I_(3-x)Cl_x films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.     

Influence of Annealing Temperature on Structure, Optical Loss and Laser-Induced Damage Threshold of TiO2 Thin Films

TiO2 thin films are prepared on fused silica with conventional electron beam evaporation deposition. After annealed at different temperatures for 4h, the spectra and XRD patterns of the TiO2 thin film are obtained. Weak absorption of coatings is measured by the surface thermal lensing technique, and laser-induced damage threshold （LIDT） is determined. It is found that with the increasing annealing temperature, the transmittance of TiO2 films decreases. Especially when coatings are annealed at high temperature over 1173K, the optical loss is very serious. Weak absorption detection indicates that the absorption of coatings decreases firstly and then increases, and the absorption and defects play major roles in the LIDT of TiO2 thin films.     

Structural,Optical and Electrochromic Properties of WO_3 Thin Films Prepared by Chemical Spray Pyrolysis Versus Spin Coating Technique

In this study, Tungsten Oxide (WO₃) thin films were prepared by Chemical Spray Pyrolysis (CSP) and Spin Coating (SC) techniques and it was investigated effects of technique and parameter on the films. WO₃ thin films were deposited on ITO (Indium Tin Oxide) coated glasses. The structural, optical and electrochromic properties of the WO₃ thin films were characterized by XRD, SEM, UV, and CV measurements. The sharpest (200) peak was observed in the XRD spectra and optical band gaps were calculated around 2.6～3.1 eV via UV-Vis spectra for all of the samples. Micro fibrous reticulated surface (filamentous like) morphology for the films deposited by CSP technique and smooth surface morphology with high optical transmittance for the film deposited by SC Technique were obtained from SEM images. In addition to these results, it was revealed that all the samples exhibit good electrochromic performance.     

Effects of oxygen partial pressure on optical properties of NiO_x films deposited by reactive DC-magnetron sputtering

The influence of oxygen partial pressure on the optical properties of NiOx thin films deposited by reactive DC-magnetron sputtering from a nickel metal target in a mixture gas of oxygen and argon was presented. With the oxygen ratio increasing, the reflectivity of the as-deposited films decreased, and optical band gap increased. Thermogravimetric analysis (TGA) showed that the decompose temperature of the films was above 250℃. After annealed at 400℃, only films deposited at 5% O2/Ar ratio showed high optical contrast which was about 52%. Scanning electron microscope (SEM) results revealed that the changes of surface morphology were responsible for the optical property variations of the films after annealing. Its thermal stability and high optical contrast before and after annealing made it a good potential write-once optical recording medium.     

Nonlinear optical switching and all-figures of merit in Bi2S3-xSex/PMMA nanocomposite films investigated by Z scan under visible CW laser

Bi2S3-xSex/poly(methyl methacrylate)(PMMA)nanocomposite films were prepared using microwave assisted synthesis with different compositions of x.Crystal structure,surface morphology,and optical properties were investigated to characterize the prepared nanocomposite films.The crystallinity and optical band gap of the prepared Bi2S3-xSex/PMMA were affected by x.The prepared samples showed a blue shift in the absorption edge.The laser power dependent nonlinear refraction and absorption of Bi2S3-xSex/PMMA nanocomposite films were investigated by using the Z-scan technique.The optical nonlinearity of the nanocomposite films exhibited switchover from negative nonlinear refraction to positive nonlinear refraction to negative nonlinear refraction effects,and from saturable absorption to reverse saturable absorption to saturable absorption with an increase and decrease in the composition.An interesting all-optical figure of merit was reported to assess the nanocomposite films for a practical device.It was calculated that the device all-figures of merit were based on the nonlinear response,which is important for the all-optical switching device.The results demonstrate that the optimized all-optical figures of merit can be achieved by adjusting the composition and input laser power,which can be used for the design of different all-photonic devices,and the results of nonlinear switching behavior can open new possibilities for using the nanocomposite films in laser Q-switching and mode-locking.