Spallation Yield of Neutrons Produced in Thick Lead Target by 400 MeV/u Carbon Ions

Measurement of the neutron yield is performed at a primary energy of 400 MeV/u carbons for the Pb target.Water-bath activation-foil method is used in a moderation measurement with Au foils to detect the moderated neutrons. The neutron yield is determined to be 18.4±2.1 per carbon by integrating the neutron flux over the entire water volume. The corresponding simulation values are performed by Geant4 code with three models to compare with the experimental results. The comparison shows that the calculated result with the INCL model is in good agreement with the experimental data.     

Study of neutron activation yields in spallation reaction of 400 MeV/u carbon on a thick lead target

The spallation-neutron yield was studied experimentally by bombarding a thick lead target with 400 MeV/u carbon beam. The data were obtained with the activation analysis method using foils of Au, Mn, Al, Fe and In. The yields of produced isotopes were deduced by analyzing the measured γ spectra of the irradiated foils. According to the isotopes yields, the spatial and energy distributions of the neutron field were discussed. The experimental results were compared with Monte Carlo simulations performed by the GEANT4+FLUKA code.     

Measurement of tritium production rate distribution for a fusion-fission hybrid conceptual reactor

A fusion-fission hybrid conceptual reactor is established. It consists of a DT neutron source and a spherical shell of depleted uranium and hydrogen lithium. The tritium production rate (TPR) distribution in the conceptual reactor was measured by DT neutrons using two sets of lithium glass detectors with different thicknesses in the hole in the vertical direction with respect to the D~+ beam of the Cockcroft-Walton neutron generator in direct current mode. The measured TPR distribution is compared with the calculated results obtained by the threedimensional Monte Carlo code MCNP5 and the ENDF/B-Ⅵ data file. The discrepancy between the measured and calculated values can be attributed to the neutron data library of the hydrogen lithium lack S (α,β) thermal scattering model, so we show that a special database of low-energy and thermal neutrons should be established in the physics design of fusion-fission hybrid reactors.     

Measurement of the neutron spectrum of a Pu-C source with a liquid scintillator

The neutron response function for a BC501A liquid scintillator （LS） has been measured using a series of monoenergetic neutrons produced by the p-T reaction. The proton energies were chosen such as to produce neutrons in the energy range of 1 to 20 MeV. The principles of the technique of unfolding a neutron energy spectrum by using the measured neutron response function and the measured Pulse Height （PH） spectrum is briefly described. The PH spectrum of neutrons from the Pu-C source, which will be used for the calibration of the reactor antineutrino detectors for the Daya Bay neutrino experiment, was measured and analyzed to get the neutron energy spectrum. Simultaneously the neutron energy spectrum of an Am-Be source was measured and compared with other measurements as a check of the result for the Pu-C source. Finally, an error analysis and a discussion of the results are given.     

Measurement of the response function and the detection efficiency of an organic liquid scintillator for neutrons between 1 and 30 MeV

The light output function of a φ50.8 mm×50.8 mm BC501A scintillation detector was measured in the neutron energy region of 1 to 30 MeV by fitting the pulse height （PH） spectra for neutrons with the simulations from the NRESP code at the edge range. Using the new light output function, the neutron detection effciency was determined with two Monte-Carlo codes, NEFF and SCINFUL. The calculated effciency was corrected by comparing the simulated PH spectra with the measured ones. The determined effciency was verified at the near threshold region and normalized with a Proton-Recoil-Telescope （PRT） at the 8-14 MeV energy region.     

Calculation of prompt fission neutron spectrum for 233U（n,f） reaction by the semi-empirical method

The prompt fission neutron spectra for the neutron-induced fission of 233U for low energy neutrons （below 6 MeV） are calculated using nuclear evaporation theory with a semi-empirical method, in which the partition of the total excitation energy between the fission fragments for the nth＋233U fission reactions is determined by the available experimental and evaluation data. The calculated prompt fission neutron spectra agree well with the experimental data. The proportions of high-energy neutrons of prompt fission neutron spectrum versus incident neutron energies are investigated with the theoretical spectra, and the results are consistent with the systematics. The semi-empirical method could be a useful tool for the prompt evaluation of fission neutron spectra.     

Dosimetry Methods of Fast Neutron Using the Semiconductor Diodes

Semiconductor detectors based on a silicon pin diode are frequently used in the detection of different nuclear radiations. For the detection and dosimetry of fast neutrons, these silicon detectors are coupled with a fast neutron converter. Incident neutrons interact with the converter and produce charged particles that can deposit their energy in the detectors and produce a signal. In this study, three methods are introduced for fast neutron dosimetry by using the silicon detectors, which are： recoil proton spectroscopy, similarity of detector response function with conversion function, and a discriminator layer. Monte Carlo simulation is used to calculate the response of dosimetry systems based on these methods. In the different doses of an 241Am-Be neutron source, dosimetry responses are evaluated. The error values of measured data for dosimetry by these methods are in the range of 15-25%. We find fairly good agreement in the 241Am-Be neutron sources.     

Calculation of the wide-angle neutron spectra from the ~9Be(d,xn) reaction in a thick beryllium target

The multi-layer computing model is developed to calculate wide-angle neutron spectra, in the range from0° to 180° with a 5° step, produced by bombarding a thick beryllium target with deuterons. The double-differential cross-sections(DDCSs) for the ~9 Be(d, xn) reaction are calculated using the TALYS-1.8 code. They are in agreement with the experimental data, and are much better than the PHITS-JQMD/GEM results at 15°, 30°, 45° and 60° neutron emission angles for deuteron energy of 10.0 MeV. In the TALYS-1.8 code, neutron contributions from direct reactions(break-up, stripping and knock-out reactions) are controlled by adjustable parameters, which describe the basic characteristics of typical direct reactions and control the relative intensity and the position of the ridgy hillock at the tail of DDCSs. It is found that the typical calculated wide-angle neutron spectra for different neutron emission angles and neutron angular distributions agree quite well with the experimental data for 13.5 MeV deuterons. The multi-layer computing model can reproduce the experimental data reasonably well by optimizing the adjustable parameters in the TALYS-1.8 code. Given the good agreement with the experimental data, the multi-layer computing model could provide better predictions of wide-angle neutron energy spectra, neutron angular distributions and neutron yields for the ~9 Be(d, xn) reaction neutron source.     

Measurement of neutron cross sections and resonance parameters of ^169Tm below 100 eV

The neutron total cross-sections of thulium （^169Tm） were measured in the neutron energy region from 0.01 eV to 100 eV by using the time-of-flight method at the Pohang Neutron Facility, which consists of an electron linac, a water-cooled tantalum target with a water moderator, and a 12 m time of flight path, Two thulium plates with different thicknesses were used for the neutron transmission measurement. The background level was determined by using a notch-filter of Co, In, and Cd sheets. The present measurement was compared with the previous ones, and a new set of resonance parameters of ^169Tm isotope was obtained from the transmission rate by using the SAMMY code, with a comparison with the recommended parameters by Mughabghab.     

Study of an unfolding algorithm for D-T neutron energy spectra measurement using a recoil proton method

A proton recoil method for measuring D-T neutron energy spectra using polyethylene film and a Si(Au) surface barrier detector is presented. An iteration algorithm for unfolding the recoil proton energy spectrum to the neutron energy spectrum is investigated. The response matrices R of the polyethylene film at angles of 0° and 45° were obtained by simulating the recoil proton energy spectra from mono-energetic neutrons using the MCNPX code. With an assumed D-T neutron spectrum, the recoil proton spectra from the polyethylene film at angles of 0° and 45° were also simulated using the MCNPX code. Based on the response matrices R and the simulated recoil proton spectra at 0° and 45°, the respective unfolded neutron spectra were obtained using the iteration algorithm, and compared with the assumed neutron spectrum. The results show that the iteration algorithm method can be applied to unfold the recoil proton energy spectrum to the neutron energy spectrum for D-T neutron energy spectra measurement using the recoil proton method.     

Rigorous solution of a problem for a cylindrical cavity containing a ferrite and a dielectric

A rigorous solution is given for modes of TM_nmo type. The complex resonant frequency _n is expressed via a transcendental characteristic equation. Some particular cases are discussed.Read at the Third All-Union Conference on Ferrites, Leningrad, 23 October 1963.     

Solving a relativistic quasipotential equation for a superposition of a nonlocal separable and a local quasipotential

Within the relativistic quasipotential approach to quantum field theory, a method is developed for solving a finite-difference quasipotential equation for the case where a total quasipotential describing the interaction of two relativistic spinless particles of unequal masses is a superposition of a nonlocal separable and a local quasipotential. The cases are investigated where the local component of the total interaction—it is assumed to be known—either admits or does not admit the existence of bound states. This makes it possible to obtain an exact expression for the increment of the phase shift, to determine the conditions of the existence of bound states, and to give a generalization of the Levinson theorem.     

Tunnelling process between a semiconductor or a metal and a polymer

The tunnelling lifetime of an electron lying in a p-type orbital localised at a given distance from a semiconductor or a metal is calculated by using Bardeen's method. It is then shown that even in the absence of broad bands, the hole injection process from semiconductors and metals into polymers should follow a Fowler-Nordheim dependence, provided that the current is not bulk-limited. In the semiconductor case, the current can be expressed by a fully analytical formula, and by an approximate one in the case of a metal. It is demonstrated that the effective Fowler-Nordheim barrier is not the mere difference between the metal work function or the semiconductor electron affinity and the HOMO level of the polymer, but a simple function of both levels. Received 6 April 2001 and Received in final form 29 May 2001     

Modeling a waveguide with a nonlinear insert with a quadratic nonlinearity

The scalar problem of the scattering of a wave from a nonlinear insertion lying in the interior of a waveguide is reduced by the incomplete Galerkin method to the boundary value problem for a Hamiltonian system. The cases in which this problem admits a solution in finite terms are indicated. Examples are given to illustrate specific phenomena due to the nonlinearity of the problem.     

Formation of a bistructure of a solid in a computer experiment

Molecular-dynamics was used to investigate the structural changes occurring in a three-dimensional solid when the solid is transferred from an amorphous into a crystalline state. Crystal cells of a new type — pentadecahedrons with five square lateral faces and ten regular triangular faces at the vertices of a cell — were found for the first time in a computer experiment. It is shown that a bistructure consisting of crystal cells of different types, including cells with five-fold symmetry axes, are stable in the solid. Fiz. Tverd. Tela (St. Petersburg) 40, 1919–1924 (October 1998)