A beam shaping design for coupling high power diode laser stack to fiber with capability of spectral narrowing and stabilizing

We applied a VHG-FAC lens in our design in this work to collimate the fast axis and lock the output spectrally. We used a beam shaping technique to improve the beam symmetry and power density of a high power diode laser stack with a stripe mirror plate, a V-Stack mirror and polarization beam combining elements. By this technique, the beam of a high power diode laser stack is effectively coupled into a standard 365 μmcore diameter and a NA = 0.22 fiber. By this technique, compactness, higher efficiency, narrower spectral line width and lower production cost of the diodes are possible.     

Experimental study on beam shaping in a reduced-scale relay mirror system

Improving power coupling efficiency of beam uplink propagation in a relay mirror system is under extensive research in recent years. A typical model of the relay mirror system is established and theory of beam shaping used to improve power coupling efficiency of the relay mirror system is analyzed in detail. A reduced-scale experimental relay mirror system is founded, which has the same Fresnel number as uplink propagation in the relay mirror system with 1.0 m-caliber transmitter and 30?km propagation distance. Phase distribution of the source is optimized by using the stochastic parallel gradient descent algorithm. The experimental results showed that power coupling efficiency of uplink propagation in the reduced-scale relay mirror system was improved from 72.67 to 87.88 % by beam shaping and the bucket power proportion in 5 pixels at the target was improved from 45.49 to 52.78 %.     

Theoretical analysis and test for off-axis Cassegrain optical antenna

By detailed analysis of Cassegrain optical antenna with inclined optical axis, the receiving antenna power and the curve of power attenuation are obtained for different deflection angles. Three-dimensional images which describe the power distribution of the receive laser beam have been obtained. The coupling efficiency of antenna system is obtained from specific experiment. If the deflection angle is less than 0.1519 rad, the coupling efficiency is beyond 80%. In this case, the optical antenna system can be viewed as in alignment approximately. This research will provide a theoretical base and broad application for achieving precise alignment of optical axis in the field of optical communications and three-dimensional laser radar images.     

A high-power continuous-wave diffraction-limited Nd:GdVO4 laser operating at 1.34 μm

High-power and high beam quality continuous-wave (CW) Nd:GdVO₄ lasers operating at 1.34 μm were experimentally demonstrated. The lasers consisted of either one or two crystals, which were both end-pumped by high-power fiber-coupled diode lasers. With one crystal, the maximum CW output power generated was 8.4 W. When two crystals were used, a maximum output power of 15.7 W was achieved with the incident pump power of 76.2 W, showing a slope efficiency of 26.2% and an optical-to-optical efficiency of 20.6%. The beam divergence at an output power of 15 W was measured to be about two times that of the diffraction limit.     

Diode-pumped Nd:YAG ceramic laser at 946 nm passively Q-switched with a Cr4+:YAG saturable absorber

We demonstrate a diode-pumped Nd:YAG ceramic laser with emission at 946 nm that is passively Q-switched by single-crystal Cr⁴⁺:YAG saturable absorber. An average output power of 1.7 W is measured under 18.4 W of incident power using an output mirror with transmission T=4%. The corresponding optical-to-optical efficiency is 9.2%. The laser runs at a pulse repetition rate of 120 kHz and delivers pulses with energy of 14 μJ and duration of 80 ns, which corresponds to a peak power of 175 W.     

External-cavity beam combining of 4-channel quantum cascade lasers

We demonstrate an external-cavity (EC) beam combining of 4-channel quantum cascade lasers (QCLs) with an output coupler which makes different QCL beams propagating coaxially. A beam combining efficiency of 35% (up to 75% near threshold) is obtained with a beam quality M² of 5.5. A peak power of 0.64 W is achieved at a wavelength of 4.7 μm. The differences of spot characteristic between coupled and uncoupled are also showed in this letter. The QCLs in this EC system do not have heat crosstalk so that the system can be used for high power beam combining of QCLs.     

A compact continuous-wave green laser with line beam for laser projection

An efficient and compact continuous-wave green laser with line beam using LBO crystal was developed. The maximum output power was 6.5 W. The optical-to-optical conversion efficiency was as high as 31%. The compact size of the line beam green laser was 2 cm×5 cm×8.8 cm. Reliability and stability of the green laser were evaluated.     

Beam dynamics of 20 MeV MIRRORCLE-type tabletop storage ring

An experimental study on beam dynamics in MIRRORCLE-20, a tabletop storage ring of 15 cm orbit radius, was performed. Measurement of the infrared (IR) synchrotron light is the tool of this study. The IR emission is enhanced by a circular optics, named photon storage ring (PhSR), placed around the electron orbit, and is collected by a magic mirror associated with two plane mirrors in the storage ring. The measured average IR power in mid-IR region (λ < 50 μm) is ～59 mW. The observed stored beam current is about 1.2 A at maximum, which represents a record for a storage ring. The observed beam size is about 74 × 3 mm². We conclude that this very long beam size is due to the large betatron oscillation of 2/3 resonance injection.     

Compact 1.9 THz BWO local-oscillator for the GREAT heterodyne receiver

The 1.9 THz local-oscillator (LO) of the GREAT heterodyne receiver is presented. The LO is based on a frequency tripled backward-wave oscillator source. The frequency stabilization system is described and an astigmatic imaging system, developed for improved beam coupling, is presented. Allan variances and temperature dependent power drifts are analyzed. The LO is designed as a stand-alone system and fits into GREAT’s local-oscillator compartments. It produces more than 1.5 μW of stable output power to pump the hot electron bolometer mixers of the GREAT instrument.     

A 980 nm Yb-doped single-mode fiber laser pumped by a 946 nm Q-switched Nd:YAG laser

We demonstrate a 980 nm single-mode Yb-doped fiber laser with a 946 nm Q-switched Nd:YAG laser used as the pump source. The experimental arrangement exploited a 36.5 cm length of fiber and used the output from both ends of the cavity, providing a total average output power of 100 mW with a slope efficiency of 38%. In order to increase the coupling efficiency and the practicability of the fiber laser, another experimental setup with single ended output was studied, producing an average output power of 80 mW from a fiber length of 23.5 cm. The pulse duration is 10 ns at a repetition frequency of 16 kHz. The linewidth of the laser is 4 nm, ranging from 977 to 981 nm.     

A linearly-polarized tunable Yb-doped fiber laser using a polarization dependent fiber loop mirror

A Ytterbium-doped linearly-polarized fiber laser is constructed with a polarization maintaining fiber Sagnac loop mirror. The fiber loop mirror made of polarization maintaining fiber coupler has a polarization dependent reflectivity, which provides the necessary polarization discrimination between the slow and fast axes. With a fiber Bragg grating written in normal polarization maintaining fiber as an output coupler, laser output of up to 5.6 W at 1070 nm is generated with a polarization extinction ratio of > 20 dB and an overall efficiency of 55%. The broadband polarization dependent reflection of the fiber loop mirror offers advantages of easy spectral tuning and simple linearly-polarized laser generation.     

Improvement in solar-pumped Nd:YAG laser beam brightness

Solar-pumped solid-state lasers are promising for renewable extreme-temperature material processing. Here we report a large improvement in solar laser beam brightness by pumping a thin Nd:YAG single crystal rod. A fused silica light guide of 14 mm×22 mm rectangular cross-section is used to both transmit and homogenize the concentrated solar radiation from the focal zone of a 2.88 m² parabolic mirror to the entrance aperture of a modified 2D-CPC flooded pump cavity, within which a 4 mm diameter rod is efficiently pumped. 2.2% slope efficiency is reached. Laser beam brightness figure of merit B is three times higher than that of the most recent solar-pumped Nd:YAG laser by a Fresnel lens. The introduction of the rectangular cross-section light guide has also ensured a much more stable laser emission than previous pumping schemes.     

Towards a 1 MW, 170 GHz gyrotron design for fusion application

The electrical design of different components of 1 MW, 170 GHz gyrotron such as, magnetron injection gun, cylindrical interaction cavity and collector and RF window is presented in this article. Recently, a new project related to the development of 170 GHz, 1 MW gyrotron has been started for the Indian Tokamak. TE_34,10 mode is selected as the operating mode after studied the problem of mode competition. The triode type geometry is selected for the design of magnetron injection gun (MIG) to achieve the required beam parameters. The maximum transverse velocity spread of 3.28% at the velocity ratio of 1.34 is obtained in simulations for a 40 A, 80 kV electron beam. The RF output power of more than 1 MW with 36.5% interaction efficiency without depressed collector is predicted by simulation in single-mode operation at 170 GHz frequency. The simulated single-stage depressed collector of the gyrotron predicted the overall device efficiencies >55%. Due to the very good thermal conductivity and very weak dependency of the dielectric parameters on temperature, PACVD diamond is selected for window design for the transmission of RF power. The in-house developed code MIGSYN and GCOMS are used for initial geometry design of MIG and mode selection respectively. Commercially available simulation tools MAGIC and ANSYS are used for beam–wave interaction and mechanical analysis respectively.     

The disinfection effect of a novel continuous-flow water sterilizing system coupling dual-frequency ultrasound with sodium hypochlorite in pilot scale

In this paper, a self-designed novel continuous-flow water disinfection system coupling dual-frequency ultrasound (US) with chemical disinfectant sodium hypochlorite (NaClO) was tested in a pilot scale using a simulated effluent containing Bacillus subtilis (B. subtilis), one of the indicators of water treatment efficiency. A suspension having a B. subtilis concentration of approximately 10⁴ CFU/mL was introduced into the system to (1) investigate disinfection efficiency of US pretreatment with NaClO (US + NaClO) and simultaneous US and NaClO (US/NaClO) disinfection under different single frequencies; (2) further examine the disinfection efficiency of these two processes with dual-frequency US; and (3) identify dosage reduction of chlorine in this disinfection system. The results demonstrated that lower dual-frequency (17 kHz + 33 kHz) US pretreatment with NaClO disinfection and simultaneous higher dual-frequency (70 kHz + 100 kHz) US and NaClO were beneficial to bacterial inactivation in terms of sterilizing efficiency. It has also been observed that US pretreatment with lower combination of 17 + 33 kHz frequencies showed better enhancement in which log reduction reached to 3.82 after 10 min chlorine reaction (chlorine alone was 0.22 log reduction), nearly 1 log reduction higher than single frequencies at the same constant power. Consequently, at equivalent power dissipation levels, US of lower frequencies combination pretreatment with NaClO disinfection performed such a promising process that one-thirds (from 12 mg/L NaClO reduced to 8 mg/L NaClO) of the required NaClO dosage was reduced for the ideal disinfection efficiency of 4 log reduction, namely 100% disinfection. And the utilization efficiency of NaClO was increased from 37.67% to 85.25% in 30 min of treatment time using an optimized combination of pretreatment and chlorination.     

RF behavior of triple-frequency high power fusion gyrotron

The RF behavior of high power, triple frequency (170-, 127.5-, and 85 GHz) gyrotron for fusion application is presented in this paper. The operating mode selection is discussed in detail for each corresponding frequencies and TE_34,10, TE_25,8 and TE_17,5 modes are selected as the operating mode for 170 GHz, 127.5 GHz and 85 GHz operation of the device, respectively. The interaction cavity geometry and beam parameters are finalized by the cold cavity analysis and beam-wave interaction simulations. Considering the beam parameters and the beam launching positions in cavity (beam radius), the design of Magnetically Tunable MIG (MT-MIG) is also presented. Results of MT-MIG confirm the beam launching with desired beam parameters at the beam radius corresponding to the selected operating modes for all three frequencies. The CVD diamond window is also designed for RF power transmission. The beam-wave interaction simulations confirm more than 1 MW power at all three frequencies (170-, 127.5-, and 85 GHz).     

Generation of tunable and narrow linewidth continuous-wave yellow laser by sum–frequency mixing of diode-pumped solid-state Nd:YAG ring lasers

We report a tunable, narrow linewidth and high beam quality continuous-wave (CW) yellow laser system at 589 nm. The system is an all solid-state design employing single-pass sum–frequency generation in a KTP crystal by mixing the 1064 nm with 1319 nm lines of two side-pumped Nd:YAG enforcing unidirectional ring lasers. With this method, a CW yellow laser at 589.159 nm with an output power of 0.8 W, a linewidth less than 1.5 GHz and a beam quality M² = 1.29 is obtained. The wavelength of the laser also can be precisely tuned from 589.112 to 589.181 nm in step-length of about 0.22 pm.     

Third-order photonic-crystal distributed-feedback quantum cascade lasers

We demonstrate room-temperature operation of broad-area edge-emitting photonic-crystal distributed-feedback quantum cascade lasers at λ ～ 4.6 μm. The lasers use a weak-index perturbed third-order photonic-crystal lattice to control the optical mode in the wafer plane. Utilizing this coupling mechanism, the near-diffraction-limited beam quality with a far-field profile normal to the facet can be obtained. Single-mode operation with a signal-to-noise ratio of about 20 dB is achieved in the temperature range of 85–290 K. The single-facet output power is above 1 W for a 55 μm × 2.5 mm laser bar at 85 K in pulsed mode.     

Diode-pumped monolithic Er3+:Yb3+:YAl3(BO3)4 micro-laser at 1.6 μm

Efficient eye-safe 1.6 μm monolithic laser was realized in a c-cut, 0.7-mm-thick Er³⁺:Yb³⁺:YAl₃(BO₃)₄ microchip end-pumped by a quasi-continuous-wave 970 nm diode laser. At incident pump peak power of 20.4 W, a maximum output peak power of 2.6 W with a slope efficiency of 19% was obtained when the waist radius of pump laser beam was 220 μm. The spectra and profiles of output beam of the Er³⁺:Yb³⁺:YAl₃(BO₃)₄ monolithic laser were measured. The influences of the waist radius of pump laser beam on the slope efficiency and threshold of the monolithic laser were also investigated.     

Removal of four kinds of volatile organic compounds mixture in air using silent discharge reactor driven by bipolar pulsed power

A silent discharge reactor initiated by bipolar pulsed power substituting the traditional ac power was used to remove the volatile organic compounds (VOC_s) mixture of acetone, benzene, tetrachloroethylene and m-xylene. The results indicated that the silent discharge driven by bipolar pulsed power could effectively input pulsed energy, produce strong instant discharge and energetic particles, and thus enhance the removal efficiency of the mixed VOC_s. The order of the removal efficiency of mixed VOC_s followed as acetone < benzene < tetrachloroethylene < m-xylene no matter what power supply was used. Comparing with single-compound, the removal efficiency of m-xylene only fell a little but those of the other three components fell a lot in the process of the mixed VOC_s treatment. In addition, controlling the status of electrical discharge plasma by changing the discharge parameters (such as capacitance of the pulse capacitor and pulse repetitive rate) was found to be an efficient way to enhance the removal efficiency of the mixed VOC_s. In this system, the Cp = 2 nF was the optimal capacitance for the bipolar power supply combined with the silent discharge reactor that had the best energy conversion efficiency for removal of mixed VOC_s. A higher pulse repetitive rate and longer residence time could also increase the removal efficiency of mixed VOC_s.     

Coherent beam combining of two fiber amplifiers using stochastic parallel gradient descent algorithm

We demonstrate the coherent beam combining of fiber amplifiers using a stochastic parallel gradient descent (SPGD) algorithm, producing a total output power of 23 W. Active phase control on each amplifier is performed by running the SPGD algorithm on a DSP chip with updating rate of almost 100 kHz. Experimental results show that power encircled in the target pinhole in closed-loop mode is 1.85 times more than that in open-loop mode, which is 92% of the ideal case. The fringe contrast of the far-field fringe pattern is as high as 92% when the system is in closed-loop mode. The whole system in closed-loop mode performs well in a long-time observation.