紫外衍射微透镜阵列的设计与制备

为了提高紫外焦平面阵列的填充因子,可以通过微透镜阵列与紫外焦平面阵列的集成,以改善紫外焦平面阵列的探测性能。根据标量衍射理论设计了用于日盲型紫外焦平面阵列的128×128衍射微透镜阵列,其工作中心波长为350nm,单元透镜F数为F/3.56。采用组合多层镀膜与剥离的工艺方法制备了128×128衍射微透镜阵列,对具体的工艺流程和制备误差进行了分析,测量了衍射微透镜阵列的光学性能。实验结果表明:衍射微透镜阵列的衍射效率为88%,与理论值95%有偏差,制备误差主要来自对准误差和线宽误差。紫外衍射微透镜阵列具有均匀的焦斑分布,与紫外焦平面阵列单片集成能较好地改善器件的整体性能。     

一种基于光栅的滚转角测量新方法

提出了一种利用一维平面透射光栅作为敏感器件的滚转角测量新方法。利用聚焦透镜及光电位置探测器组成接收测量单元, 避免了直线度误差带来的影响; 利用光栅的±1级衍射光束构成双光路差动测量, 基本避免了俯仰、偏摆角的串扰, 实现了误差分离, 同时增强了抗干扰能力。通过详细的理论分析, 论证了方案的可行性, 并在此基础上通过实验得到了定标曲线, 其线性相关度为1, 滚转角测量的角度分辨率可以达到0.6″。测量方法简单灵活, 仅需更换不同线数的光栅便可满足不同测量精度的要求。     

光学微透镜阵列成像质量预测和测量

为了研究微透镜阵列成像质量的影响因素,针对慢刀伺服加工和紫外（UV）光固化工艺制备的微透镜阵列,引入微透镜阵列镜片的误差,建立基于Zemax光学软件的光学微透镜阵列成像仿真模型,分析透镜单元的高度、曲率半径、入瞳直径等误差对微透镜阵列成像质量的影响。搭建光学测试平台对评价微透镜阵列成像性能的光学参数进行检测,包括各透镜单元的焦斑大小、位置误差及其焦距值,并利用点扩散函数（PSF）曲线的半峰全宽值对光场成像结果进行成像质量评价,测量得到微透镜阵列的焦距标准误差为0.12 mm。将测量结果与仿真结果相比,可得PSF曲线的半峰全宽值误差在12%左右,证明了仿真模型的准确性。利用仿真和实验的方法建立了微透镜阵列镜片误差与其光学成像质量之间的关系,这可为基于功能实现的光学微透镜阵列的超精密加工工艺提供理论基础和指导。     

二元微透镜阵列在密集多载波波分复用器中的应用

介绍了采用位相平衡设计法设计优化的二元微透镜阵列，并应用于工作波长为１．５３６￣１．５６４μｍ，通信间隔４ｎｍ的８通道光栅型密集波分复用器。设计并计算了二元微透镜各单元的位相结构和接收光纤端面上的衍射远场分布，最后讨论了当采用单模和多模接收光纤时，二元微透镜阵列部分引入的损耗及其在多模接收光纤中激起的基模比例。     

Mirau相移干涉法测量微透镜阵列面形

基于Mirau相移干涉法，在实验室环境下对微透镜阵列的微表面形貌进行了轮廓测量.实验使用He-Ne激光器作为光源，干涉成像系统由Mirau干涉物镜和其他光学元件组成.在实验中使用压电陶瓷执行器作为相移器，通过5步相移法计算待测表面形貌.实验结果表明，基于Mirau相移干涉法对微透镜阵列面形的测量，水平分辨率达到1.1 μm，垂直测量准确度达到6.33 nm，垂直测量范围为5 μm.对于微透镜阵列的面形测量，通过将微透镜阵列划分为若干微小区域以保证局部面形最大高度小于5 μm，然后辅以精密平移机构进行若干次5步相移法测量局部面形，再利用相位重建所得的数据进行拼接和3D轮廓重建，最终得到整个微透镜阵列的精确微表面形貌.     

原子力显微镜加工红外微透镜阵列的研究

提出了利用原子力显微镜灰阶阳极氧化方法加工Si、Ge、GaAs等晶体材料为基础的红外微透镜阵列.加工了3×3的红外硅微透镜阵列,微透镜的高度和表面直径重复性误差分别为0.2nm和6.0 nm,微透镜的平均曲率半径为510.8 nm.分析了原子力显微镜加工红外微透镜产生面型结构误差的原因,并提出了减小面型结构误差的方法.利用此种方法加工的折射、衍射和混合红外微透镜阵列可以进一步缩小红外成像系统的尺寸.     

飞秒激光和酸刻蚀方法制作凹面微透镜阵列

基于飞秒激光光刻技术和氢氟酸对光学玻璃的刻蚀,在K9光学玻璃表面制作了凹面微透镜阵列,并且可以以此为模板实现凸微透镜阵列的大量复制.用相位对比显微镜和扫描电子显微镜分析了微透镜阵列的表面轮廓,测试了微透镜阵列的光学衍射特征.该方法简单、透镜参量可控,制作的微透镜阵列能够用于分光、光束匀化、并行光刻等强激光领域.     

飞秒激光和酸刻蚀方法制作凹面微透镜阵列

基于飞秒激光光刻技术和氢氟酸对光学玻璃的刻蚀,在K9光学玻璃表面制作了凹面微透镜阵列,并且可以以此为模板实现凸微透镜阵列的大量复制.用相位对比显微镜和扫描电子显微镜分析了微透镜阵列的表面轮廓,测试了微透镜阵列的光学衍射特征.该方法简单、透镜参量可控,制作的微透镜阵列能够用于分光、光束匀化、并行光刻等强激光领域.     

光栅衍射实验中测量光栅常数的两种辅助方法

衍射光栅可以将不同波长的光在空间上分离开,在光谱分析领域中有广泛应用.利用光栅的衍射来测量光栅常数是大学物理实验中的一个典型实验,而本文介绍的正是光栅衍射实验中的两个有趣现象:一是旋转光栅时,谱线的偏转角存在一个最小值;二是光栅旋转到一定角度时,衍射光斑会逐渐消失在视野中.论文从理论上分析解释这两种现象,并设计出两种测量光栅常数的方法,在实验上进行验证.与传统的用最小偏转角测光栅常数的方法相比,本文重点分析了由判定最小偏转角位置偏差所带来的影响,并提出了对称旋转测量的方法来进一步减小误差.     

小F数衍射微透镜阵列光学性能研究

本文基于小光点扫描,在国内首次提出了一种测试小F数衍射微透镜阵列光学性能的方法.利用光通信用半导体激光器和探测器建立了一套测试系统,并对所研制的大阵列,小单元尺寸的多相位菲涅耳衍射微透镜阵列的衍射效率和点扩散函数进行了测试.结果表明,衍射微透镜实际衍射光斑比理论衍射受限光斑扩展不大,8相位和16相位石英微透镜的衍射效率分别高达80.2%和87.5%,说明本实验室对多相位的设计理论和制作工艺已基本掌握,满足应用的要求.     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix.Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image.By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then.Gradientloading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading.Compared with the approach using least square filtering, its peak signal-to-noise ratio (PSNR) is improved from 3.18 to 6.46dB, while the computing time is reduced to 1/2-1/3.Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.     

All-Optical Logic Device Using Bent Nonlinear Tapered Y-Junction Waveguide Structure

We propose an all-optical logic device made of a bent tapered Y-junction waveguide with a Kerr-type nonlinear interface. It could provide an AND gate, OR gate, and exclusive-OR (XOR) gate. We could obtain different transmission results by adjusting the bending angle. The numerical simulation results show that the device functions as AND, OR, and XOR gates.     

Real-time, continuous-wave terahertz imaging by a pyroelectric camera

Real-time, continuous-wave terahertz (THz) imaging is demonstrated. A 1.89-THz optically-pumped farinfrared laser is used as the illumination source, and a 124 × 124 element room-temperature pyroelectric camera is adopted as the detector. With this setup, THz images through various wrapping materials are shown. The results show that this imaging system has the potential applications in real-time mail and security inspection.