Study on the prestressed sandwich piezoelectric ceramic ultrasonic transducer of torsional-flexural composite vibrational mode

Based on the classical torsional and flexural vibrational theory of a slender rod, the prestressed sandwich torsional-flexural composite mode piezoelectric ceramic ultrasonic transducer is studied. This type of transducer consists of the slender metal rods and the longitudinally and tangentially polarized piezoelectric ceramic rings. The resonance frequency equations for the torsional and flexural vibrations in the transducers are derived. The simultaneous resonance of the torsional and flexural vibrations in the transducer is acquired by correcting the length of the metal slender rods resulting from the piezoelectric ceramic elements. The experimental results show that the measured resonance frequencies of the transducers are in good agreement with the computed ones, and the measured resonance frequencies of the torsional and the flexural vibrations in the composite transducers are also in good agreement with each other.     

Theoretical analysis and experimental validation of radial cascaded composite ultrasonic transducer

A radial cascaded composite ultrasonic transducer is analyzed.The transducer consists of three short metal tubes and two radially polarized piezoelectric ceramic short tubes arranged alternately along the radial direction.The short metal tubes and the piezoelectric ceramic short tubes are connected in parallel electrically and in series mechanically,which can multiply the input sound power and sound intensity.Based on the theory of plane stress,the electro-mechanical equivalent circuit of radial vibration of the transducer is derived firstly.The resonance/anti-resonance frequency equation and the expression of the effective electromechanical coupling coefficient are obtained.Excellent electromechanical characteristics are determined by changing the radial geometric dimensions.Two prototypes of the transducers are designed and manufactured to support the analytical theory.It is concluded that the theoretical resonance/anti-resonance frequencies are consistent with the numerical and experimental results.When R_2 is at certain values,both the anti-resonance frequency and effective electromechanical coupling coefficient corresponding to the second mode have maximal values.The radial cascaded composite ultrasonic transducer is expected to be used in the fields of ultrasonic water treatment and underwater acoustics.     

径向极化压电陶瓷长圆管复合超声换能器的径向振动

提出了一种圆管式径向复合压电陶瓷换能器,并对其径向振动特性进行了分析。该换能器由径向极化的压电陶瓷圆管以及金属外圆管组成。利用解析法得出了金属圆管以及具有任意壁厚的径向极化压电陶瓷圆管径向振动的机电等效电路。基于金属圆管与压电圆管的机械边界条件,得出了换能器的六端机电等效电路。在此基础上得出了换能器共振及反共振频率方程的解析表达式,给出了换能器的共振及反共振频率与其几何尺寸之间的依赖关系。利用数值方法对换能器的径向振动特性进行了模拟及仿真,并与解析结果进行了比较。最后,设计并加工了一些径向复合管式压电陶瓷换能器,利用精密阻抗分析仪对其共振及反共振频率进行了实验测试。研究结果表明,利用解析理论得出的换能器共振及反共振频率与数值模拟结果以及实验测试结果符合很好。      

径向复合圆柱压电超声换能器

提出一种三元径向复合圆柱压电超声换能器,并对其径向振动特性进行了研究。基于弹性力学理论及机电类比原理,导出了柱坐标系中分割处理径向极化压电陶瓷管准厚度模振动及薄壁短圆管径向振动的机电等效电路;利用径向力和振速连续的边界条件,得出了径向复合圆柱压电换能器系统的径向振动机电等效电路及其共振频率方程。探讨了换能器径向共振频率及有效机电耦合系数随其几何尺寸的变化关系。研究表明,换能器的径向共振频率及有效机电耦合系数随其内芯半径和预应力管壁厚度增大而降低。研制了一些径向复合圆柱压电换能器,并对其径向共振频率进行了测试。结果表明,理论与实验结果基本一致。      

基于2-2型压电复合材料的新型宽频带径向振动超声换能器

本文提出了一种基于2-2型压电复合材料的新型宽频带径向振动超声换能器,它主要由内金属圆环和外压电陶瓷复合材料圆环组成.首先利用Newnham串并联理论和均匀场理论推导了2-2型压电复合材料的等效参数;其次利用解析法得到了金属圆环和径向极化压电复合陶瓷圆环径向振动的机电等效电路;最后得到了换能器的六端机电等效电路,从而得到了换能器的频率方程.接着分析了换能器共振频率和反共振频率以及有效机电耦合系数与几何尺寸、两相体积占比的关系,采用仿真软件对新型换能器的径向振动进行了数值模拟.结果表明,利用解析法得到的共振频率和反共振频率与数值模拟结果吻合较好.此外,对换能器在水下的辐射声场进行了仿真研究,结果表明新型复合材料径向换能器相比传统纯陶瓷径向换能器,发射电压响应幅值更大,工作带宽提高接近一倍,声匹配更佳.     

锥形剖面径向复合超声换能器的机电等效电路

研究了一种锥形剖面径向复合超声换能器。该换能器由一个等截面内金属圆环、一个轴向极化的压电陶瓷圆环和一个锥形剖面外金属圆环沿径向复合而成,且换能器的径向尺寸远大于高度。锥形剖面外金属圆环满足关系式h=h₀r,h₀为厚度变化常数。基于平面应力径向振动理论,推导了换能器的机电等效电路,得到了共振频率方程和反共振频率方程,进而研究了换能器的振动特性。并将理论计算的第1阶、第2阶径向共振频率和反共振频率与数值仿真结果相比较,二者结果一致。研究表明:锥形剖面换能器第1阶、第2阶径向共振频率、反共振频率、有效机电耦合系数不仅与换能器各部分的材料、径向几何尺寸有关,还与h₀有关。h₀越大,第1阶径向共振频率、反共振频率越大,有效机电耦合系数先增大后减小。与等截面相比,锥形剖面换能器沿径向向外辐射声波,辐射面积更大,辐射声功率更高,指向性更好。      

夹心式径向复合压电超声换能器

对夹心式径向复合压电换能器径向振动特性进行了研究。该换能器由弹性内芯、预应力金属管及柱面压电陶瓷晶堆径向复合而成.利用机电类比法,得到了换能器的径向振动等效电路及频率方程。探讨了换能器第1、2阶径向共振频率及有效机电耦合系数与其几何尺寸的关系。研究表明,换能器第1阶径向共振频率随其内芯内径及预应力管壁厚度增大而降低;第2阶共振频率随内芯内径增大存在极小值,但随预应力管壁厚度增大单调下降。此外,采用第2阶径向共振模式能获得较高的有效机电耦合系数,并且压电陶瓷处于位移节线时,换能器有效机电耦合系数达极大值。对换能器共振频率的测试与有限元仿真表明。理论与实验及仿真结果符合较好。      

夹心式纵-扭复合模式压电超声换能器的共振频率

本文对夹心式纵-扭复合振动模式压电超声换能器进行了研究．从换能器的等效电路出发，在无耦合时，得出了换能器中纵向振动模式及扭转振动模式的各自共振频率方程．实验表明，换能器各自共振频率的测试值与理论计算值基本符合．     

夹心式纵-扭复合模式压电超声换能器的共振频率

本文对夹心式纵－扭复合振动模式压电超声换能进行了研究，从换能器的等效电路出发，在无耦合时，得出换热能器纵向振动模式及扭转振动模式的各自共振频率方程，实验表明，换能器各自共振频率的测试值与理论计算值基本符合。     

Study on the radial composite piezoelectric ceramic transducer in radial vibration

A new type of radial composite piezoelectric transducer in radial vibration is developed and analyzed. The radial composite transducer consists of a piezoelectric ceramic thin ring polarized in the thickness direction and a metal thin circular ring. They are connected together and excited to vibrate in the radial direction. The radial vibrations of a piezoelectric ceramic thin ring and a metal thin circular ring are analyzed, respectively. Their radial electro-mechanical equivalent circuits are obtained. Based on the electro-mechanical equivalent circuits and using the boundary conditions between the piezoelectric ceramic thin ring and the metal thin circular ring in the radial direction, the electro-mechanical equivalent circuit of the radial composite piezoelectric transducer is derived out and the resonance frequency equation is obtained. The relationship between the resonance frequency and the geometrical dimensions of the transducer is analyzed. Some radial composite piezoelectric transducers are designed and manufactured. The resonance frequencies and the anti-resonance frequencies, the electro-mechanical equivalent circuit parameters are measured. The effective electro-mechanical coupling coefficient and the mechanical quality factor are calculated. It is illustrated that the measured radial resonance frequencies are in good agreement with the theoretical results from the resonance frequency equation.