Effects of grating characteristics to the performance of fiber-Bragg-grating delay line based microwave photonic filters

In this paper, both theoretical investigation and experimental verification of microwave photonic filter based on a fiber-Bragg-grating (FBG) delay line and a broadband light source have been carried out, in which the effects of spectrum and dispersion characteristics of the FBGs on the frequency response of the microwave photonic filter have been taken into consideration. Theoretical and experimental results agree well, and both results show that FBG's characteristics affect not only the free spectrum range (FSR) of microwave photonic filter's response, but also results in the frequency dependent power degrading.     

金属光子晶体高功率微波模式转换器冷测研究

研究了同轴传输线中金属光子晶体的电磁特性,在此基础上优化了一种适用于窄带高功率微波源系统的金属光子晶体TEM-TE11模式转换器。该结构通过沿传输线角向部分填充的金属光子晶体实现移相。采用数值仿真程序对L波段模式转换器进行计算,在1.57GHz中心频率上,模式转换器转换效率为99%;在1.533～1.609GHz频率范围内,模式转换器效率大于90%,相对带宽4.8%。加工了TEM模式激励器和辐射天线,并在微波暗室对模式转换器进行了小信号测试,验证了模式转换器的性能。     

光子晶体高功率微波模式转换器设计

研究了传输线中非截面排列金属光子晶体电磁特性,并利用其作为移相器提出了一种紧凑型TEM—TE11模式转换器的设计方法.利用电磁软件cst microwave studio优化设计了一套L波段TEM—TE11模式转换器,在中心频率1.58 GHz上转换效率为98%.在1.56—1.625 GHz频率范围内,模式转换器转换效率大于90%,对应带宽4.1%.模式转换器功率容量为GW级,适用于高功率微波源系统.结合磁绝缘线振荡器开展了粒子模拟研究工作,发现模式转换器性能与设计结果相符,并且其引入不影响高功率微波器件的正常工作.     

基于椭圆偏振光注入垂直腔表面发射激光器的正交偏振模式单周期振荡产生两路光子微波

提出了基于椭圆偏振光注入下垂直腔表面发射激光器(VCSEL)输出的正交偏振模式单周期(P1)振荡来同时获取两路光子微波的实现方案, 并进行了相关仿真研究. 结果表明: 在合适的参数条件下, 一个自由运行的VCSEL(定义为主VCSEL, M-VCSEL)可输出椭圆偏振光, 其X偏振分量和Y 偏振分量具有相同的激射频率; 将M-VCSEL输出的椭圆偏振光注入到另外一个VCSEL(定义为副VCSEL, S-VCSEL), 在给定主副VCSEL间频率失谐的条件下, 通过选择合适的注入强度可使S-VCSEL 中两个偏振分量均呈现单周期(P1)振荡, 从而可获得两正交的光子微波信号; 随着注入强度的增加, 光子微波的频率以及功率均呈现增加的趋势; 结合微波频率、功率以及输出光谱中第一边带和第二边带的幅度差在由注入强度和频率失谐所构成参数空间下的分布图, 可确定获取高品质微波信号的优化注入参数范围.     

超稳光生微波源研究进展

随着科技的进步以及精密测量应用技术的不断提高,超稳微波源的稳定度和噪声水平等技术要求不断提高,应用范围愈加广泛,包括高性能频标研究、网络雷达研制、深空导航系统等方面.基于超稳激光和飞秒光梳的超稳光生微波源是目前频率稳定度最高的微波频率源,相对频率稳定度可达10~(16)@1 s量级.该装置也是未来频率标准(光频标)推广应用的基础,无论是时间的产生还是绝大多数的精密测量,都需要将光频标的输出激光变换为超稳的基带频率信号后才能够实现.本文介绍了超稳光生微波源技术的发展、现状和应用需求.以国家授时中心研制的国内首套超稳微波频率源技术为主线,介绍了超稳光生微波源的原理和结构以及各组成部分的技术发展情况:超稳激光方面,着重介绍超稳光学腔研究和研制的进展以及Pound-Drever-Hall锁频技术、剩余幅度调制等噪声抑制技术;飞秒光梳方面,着重介绍目前最常用的掺铒光纤光梳系统的激光锁模、频率控制等技术发展;低噪声光电探测方面,着重介绍宽带光电探测噪声抑制技术和激光幅度噪声引起微波相位噪声的抑制技术.最后对光生超稳微波技术进行了总结和展望.     

Microwave photonic crystal multiplexer and its applications

The application of photonic band gap (PBG) structures to a microwave switch is studied. For this purpose, a frequency selective multiplexer is implemented combining one-dimensional PBG structures. The tunability of microwave photonic crystals (PCs) with ferrites and/or ferroelectric materials is then considered. A theoretical calculation performed on a two-dimensional hexagonal lattice of air rods embedded in a rectangular ferrite slab shows that the PBG is well tunable with external magnetic field parallel to the air rod. We have also discussed the implementation of microwave switch combining the tunability of PBG structures of ferrite and/or ferroelectric materials and the frequency selective nature of PBG multiplexer.     

Experimental Investigation on the Effect of Optical Source on Photonic Microwave Filter Performance

The filter frequency response and signal-to-noise ratio (SNR) capacity of fiber Bragg grating resonator based photonic microwave filter are investigated experimentally by using two lasers with different linewidths as optical sources. The effects of optical source on the photonic microwave filter performance are analyzed. The results show that when the laser linewidth is less than the filter free spectral range (FSR), the filter response is fluctuating and the SNR capacity decreases about 10dB.     

Distinguishing the Topological Zero Mode and Tamm Mode in a Microwave Waveguide Array

The Su–Schrieffer–Heeger (SSH) model has been the subject of extensive experimental research in the context of topological photonics. Ideally, the on‐site potential and hopping strength are sufficiently accurate for implementation in photonic coupled waveguide arrays. Here, two localized edge modes, the topological zero mode and trivial Tamm mode, are proposed and demonstrated in the modified SSH model using a microwave photonic waveguide array. The system used is composed of an array of evanescently coupled ultrathin corrugated metallic “H‐bar” waveguides. Furthermore, the differences between the zero mode and Tamm mode are clearly demonstrated by microwave near‐field experiments on the coupling behavior along the propagation direction for 40 cm at the excitation frequency of 17 GHz. These findings should deepen the understanding of localized edge mode confinement mechanisms, both in coupled waveguide array systems and other topological or quantum systems.     

A novel structure for a broadband left-handed metamaterial

A low absorptivity broadband negative refractive index metamaterial with a multi-gap split-ring and metallic cross (MSMC) structure is proposed and investigated numerically and experimentally in the microwave frequency range. The effective media parameters were retrieved from the numerical and experimental results, which clearly show that there exists a very wide frequency band where the permittivity and permeability are negative. The influence of the structure parameters on the magnetic response and the cut-off frequency of the negative permittivity are studied in detail. This metamaterial would have potential application in designing broadband microwave devices.     

FIR Photonic Microwave Filter Design Employing Simulated Annealing Algorithm

Photonic microwave filters are important parts of fiberoptic microwave/millimeter wave processing systems. In this paper, the synthesis problem of fiberoptic FIR microwave filters is addressed and a novel method for designing photonic microwave filter employing a simulated annealing (SA) algorithm is proposed. The design problem of photonic microwave filter can be reduced to be a multivariable function optimization problem, which can be solved by a simulated annealingbased algorithm. As an illustration of the application of SA to photonic microwave filter design, the synthesis of an optimizedFBGbased photonic microwave filter is discussed. Numerical results show that the global minimum finding capability of SA makes it be an efficient way to design the photonic microwave filter. Numerical results also demonstrate that the proposed method can be applied to design different filtering systems with different constraints.     

A tunable and reconfigurable microwave photonic filter based on a Raman fiber laser

A tunable and reconfigurable microwave photonic filter is demonstrated by employing a tunable Mach-Zehnder interferometer (MZI) and a wavelength-controllable Raman fiber laser. The free-spectral-range and spectral response of the microwave photonic filter are tuned and reconfigured by controlling the optical variable delay line in one arm of the MZI and the powers of the pump LDs. Experimental results are given to show the enhanced flexibility of the present microwave photonic filter.     

基于光注入半导体激光器单周期振荡的光子微波产生及全光线宽窄化

本文对基于光注入半导体激光器的单周期动力学态产生光子微波并利用光反馈压缩其线宽进行了实验研究. 研究结果表明: 通过适当调节注入参数, 能对该方法产生的光子微波频率在数十GHz范围内进行连续、大范围地调节; 通过引入光反馈并精细调节反馈强度, 光子微波的线宽能够从40—100 MHz的范围被压缩约两个数量级至300—900 kHz范围;反馈长度对光子微波的线宽几乎没有影响, 但当反馈长度精细变化时, 光子微波频率会出现一定范围内的周期性漂移.     

基于等离子体缺陷层的一维可调谐微波光子晶体滤波特性

等离子体填充到一维介质-真空微波光子晶体的缺陷层构成一种可调谐单通道滤波器.据等离子体的强色散特性,其等效折射率与电磁波频率及等离子体频率等参数有关,因而可以通过改变等离子参数,使一维微波光子晶体缺陷层的谐振频率发生偏移,实现微波光子晶体的可调谐滤波特性.介质层和等离子体层分别采用了时域有限差分（FDTD）算法及分段线性电流密度卷积时域有限差分（PLJERC-FDTD）算法.数值模拟表明,通过改变等离子体频率可以实现滤波通道在光子禁带内较大带宽范围的移动. 关键词： 等离子体 微波光子晶体 可调谐滤波     

Photonics for microwave measurements

As an emerging topic, photonic‐assisted microwave measurements with distinct features such as wide frequency coverage, large instantaneous bandwidth, low frequency‐dependent loss, and immunity to electromagnetic interference, have been extensively studied recently. In this article, we provide a comprehensive overview of the latest advances in photonic microwave measurements, including microwave spectrum analysis, instantaneous frequency measurement, microwave channelization, Doppler frequency‐shift measurement, angle‐of‐arrival detection, time–frequency analysis, compressive sensing, and phase‐noise measurement. A photonic microwave radar, as a functional measurement system, is also reviewed. The performance of the photonic measurement solutions is evaluated and compared with the electronic solutions. Future prospects using photonic integrated circuits and software‐defined architectures to further improve the measurement performance are also discussed.

     

A tunable single-passband microwave photonic filter with positive and negative taps using a fiber Mach-Zehnder interferometer and phase modulation

In this paper, a tunable single-passband microwave photonic filter with positive and negative taps based on phase modulation and a fiber Mach-Zehnder interferometer (FMZI)) is presented, theoretically analyzed and experimentally demonstrated. The FMZI as the slicing filter results in a single-bandpass characteristic for the presented filter, and by using phase modulation, a number of negative taps are generated, thus making the baseband resonance suppressed, which is desirable for microwave photonic filter's application. The wavelength spacing of the FMZI can be tuned by employing an optical variable delay line, making the present filter continuously tunable. A tunable single-passband microwave photonic filter without baseband resonance is achieved in the experiment. The present filter shows an extinction ratio of up to ∼20 dB and good tuning linearity.     

Design and Validation of Rugged Microwave Photonic Network for Phased-Array Radar

Abstract

Military radar has the requirement of 24 × 7 operation in harsh environments with a high level of safety and integrity built in for equipment and personnel working with it. This article presents an application of a microwave photonic network for phased-array military radar. The design challenge is to realize faithful reproduction of the input microwave signals over extreme temperature and frequency ranges. Environmental testing has been carried out to validate the performance of the proposed microwave photonic network over 2–4 GHz and a temperature range of –20°C to +55°C. The result shows that the photonic network can be successfully utilized for phased-array radar.     

High-Q microwave photonic filter with a tuned modulator

We propose the use of tuned electro-optic or electroabsorption external modulators to implement high-quality (high-Q) factor, single-bandpass photonic filters for microwave signals. Using this approach, we experimentally demonstrate a transversal finite impulse response with a Q factor of 237. This is to our knowledge the highest value ever reported for a passive finite impulse-response microwave photonic filter.     

Performance limitation of chirped-fiber-Bragg-grating-based photonic microwave notch filter due to group delay and reflectivity ripples

We investigated the performance limitation of a frequency-tunable photonic microwave notch filter incorporating a chirped fiber Bragg grating (FBG) as a group delay line. In particular, we carried out theoretical and experimental studies to analyze the impact of the reflectivity ripple (RR) and group delay ripple (GDR) in the chirped FBG on the output notch performance. The results of experimental and theoretical analyses performed on a photonic microwave notch filter in which an S-bending-based linearly chirped FBG was incorporated, revealed that the notch depth and notch frequency were significantly affected by imperfections in the chirped FBG. The notch depth was found to be decreased by the RRs, whereas significant fluctuations in the notch frequency were caused by the GDRs. On the basis of the obtained results, we conclude that the RR and the GDR are the fundamental factors that degrade the performance of chirped FBG-based photonic microwave filters.     

The development of a diamond switch for RF pulse compressionsystems

The use of a diamond RF switch for super-highpower microwave/millimeter wave generation has been evaluated. An X-band chemical vapor deposition (CVD) diamond window package was theoretically analyzed, designed, and built. Thirty-eight percent of an injected microwave signal with a frequency of 11.424 GHz was reflected from a 100-μm thick, 22-mm-diameter CVD diamond window when activated by a 160-mJ, 266-nm Nd:YAG laser. The details of the CVD diamond window design and experimental results are presented. The results have high application potential for building super-high-power microwave systems     

基于平行偏振光注入的1550nm波段垂直腔表面发射激光器获取窄线宽光子微波的理论和实验研究

提出一种基于1550 nm垂直腔表面发射激光器(1550 nm-VCSEL)获取高质量微波信号的全光方案.在该方案中,采用波长位于VCSEL中被抑制模式的中心波长附近、振动方向与VCSEL中主导模式相同的偏振光注入(即平行注入)1550 nm-VCSEL获取高频微波,并借助双光反馈对该高频微波的线宽进行窄化.一方面,基于VCSEL的自旋反转模型,从理论上分析了采用该方案产生微波信号的可行性;另一方面,通过构建相应的实验系统,对该方案产生的微波的特性进行初步实验研究.实验结果表明:在合适的注入条件下,1550 nm-VCSEL能够产生30 GHz左右的微波信号,但该信号的线宽较宽(百兆水平);引入双光反馈后,微波线宽可被压窄两个数量级以上,得到了线宽低于1 MHz、信噪比大于40 d B的微波信号.