首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 93 毫秒
1.
Resilient bars can provide a low-cost, effective improvement to sound insulation performance. They are commonly used in timber-framed floor/ceiling assemblies in North America and Europe. Resilient bars are often modelled as springs isolating the two connected plates thereby forming a mass-spring-mass system. However, as a furring system of plates, resilient bars may modify the vibration energy distribution across a connected plate by acting as stiffeners. The authors investigate this issue by measuring acceleration levels at different locations relative to the fixing positions and thereby derive vibration waveforms for the connected plate in a small-scale structural simulation of a floor-ceiling system. The results were compared with timber-joist-ribbed, and timber-brander-ribbed, structures. The vibration modes of a suspended plate were also measured for comparative purposes. The results indicated that resilient bars did not perform as stiffeners whereas joists and timber branders did effectively stiffen their connected plates. Resilient bars neither forced orthotropic plate behaviour at low frequencies, nor separated the plate into sub-plates at higher frequencies. Resilient-bar-ribbed plates may also differ from independent plates. The modal behaviour of resilient-bar-ribbed plates is more complex and their effect on modal density and radiation efficiency are worthy of further research.  相似文献   

2.
An approximate approach is described, for obtaining the source quantities required for the calculation of structure-borne sound power from machines into supporting lightweight building elements. The approach is in two stages, which are based on existing international Standards for measurement. The first stage involves direct measurement of the source free velocity at each contact, to give the sum of the square velocities. The second stage is based on the reception plate method and yields the single equivalent blocked force, which approximates the sum of the square blocked forces. The applicability of the source data obtained has been investigated in a case study of a fan unit on a timber joist floor. The approach contains several significant simplifying assumptions and the uncertainties associated with them are considered. For the case considered, the power transmitted into the floor is estimated by the approximate method to within 5 dB of the true value, on average.  相似文献   

3.
尹剑飞  温激鸿  肖勇  温熙森 《物理学报》2015,64(13):134301-134301
统计能量分析(statistical energy analysis, SEA)是复杂耦合系统中、高频动力学特性计算的有力工具. 本文以波传播理论和SEA的基本原理为基础, 研究周期加筋板中弯曲波传播特性. 分析了周期结构的频率带隙特性和加强筋对板上弯曲波的滤波特性对SEA计算结果的影响规律, 发现经典SEA由于忽视了加筋板中物理上不相邻子系统间存在的能量隧穿效应, 而导致响应预测结果产生最高近 40 dB的误差. 为了解决这一问题, 本文应用高级统计能量分析(advanced statistical energy analysis, ASEA)方法, 考虑能量在不相邻子系统间的传递、转移和转化的物理过程, 从而大幅提高子系统响应的预测精度, 将误差在大部分频段降低至小于5 dB. 设计了模拟简支边界条件的加筋板振动测试实验装置, 实验测试结果与有限元结果符合较好, 对理论模型进行了验证.  相似文献   

4.
In this paper, vibration reduction in ship cabins by using floating floor is studied. Two theoretical models are developed and predicted insertion losses of floating floors are compared to experimental results, where measurements are done in the mock-up built for simulating typical ship cabins. The floating floor consists of upper board and mineral wool, which is in turn laid on the deck plate. The first model (M-S-Plate Model) is that upper plate and mineral wool are assumed as a one-dimensional mass-spring system lying on the simply supported elastic floor. The second model (Wave Model) is that mineral wool is assumed as elastic medium, in which longitudinal wave propagates. The comparisons show that M-S-Plate model is in good agreement with experimental results, while mass-spring model on the rigid floor behaves very poorly in the low frequency ranges, particularly near the natural frequency associated with mass-spring system. On the other hand, the wave model significantly underestimates the insertion loss. It is found that including elastic behavior of the deck plate is essential in improving accuracy of the insertion loss prediction for low frequency range below 100-200 Hz.  相似文献   

5.
余亮亮  雷晓燕  罗锟 《应用声学》2021,40(1):163-172
为了探讨箱梁的结构噪声辐射规律,提高计算精度及效率,基于混合有限元-统计能量分析理论,建立1/10箱梁有限元-统计能量分析计算模型,并进行模态实验与声学实验验证。在此基础上进行声贡献量以及振动传递规律分析,并与相关文献进行比较。研究结果表明:混合有限元-统计能量分析模型不仅适用于箱梁结构噪声分析,而且在保证计算精度的同时提高了计算效率;在随机激励下,箱梁顶板和左右翼板的声贡献量高达87.3%,底板和腹板的声贡献量仅为13.7%;箱梁结构各子系统声贡献量规律与箱梁结构各子系统的振动大小规律保持一致。  相似文献   

6.
Measurements were carried out on a building to evaluate the uses of statistical energy analysis for determining sound transmission performance. Coupling loss factors were measured and compared with predicted values. It was found that, in general, good agreement was obtained. The coupling loss factors were also used to calculate the sound pressure level, or surface velocity, of each subsystem in the building for a number of different sources. Comparison with the measured results gave an average error of 4 dB. Some large errors were obtained but these were due mainly to the omission of airborne flanking paths from the SEA model or due to the breakdown of the theory for specific coupling loss factors.  相似文献   

7.
The widely-used numerical modeling approaches such as the finite element method (FEM) and statistical energy analysis (SEA) often have limited applicability to the transmission loss prediction in mid-frequency range. In this paper, a novel hybrid edge-based smoothed FEM coupled with statistical energy analysis (ES-FE-SEA) method is proposed to further improve the accuracy of “mid-frequency” transmission loss predictions. The application of ES-FEM will “soften” the well-known ‘‘overly-stiff’’ behavior in the standard FEM solution and reduce the inherent numerical dispersion error. While the SEA approach deals with the physical uncertainty in the relatively higher frequency range. The plate of interest is appropriately described by an ES-FEM model, due to its relative robustness to perturbations. Its adjacent reverberation cavities are modeled by employing the SEA approach, because of their high model density. The coupling and interaction between SEA subsystems and the FE subsystem is governed by the “reciprocity relationship” theorem. A standard numerical example for benchmarking is examined and excellent agreement was achieved between the prediction and reference results. The proposed ES-FE-SEA is also verified by various numerical examples. The method is finally applied to the modeling a complicated engineering problem–acoustic fields on both sides of the front windshield in a passenger car.  相似文献   

8.
The sound insulation of party walls in a four storey block of maisonettes was found to be considerably lower at first floor level than at other floor levels in the frequency range of approximately 600 to 3000 Hz. The rooms at first floor level lie immediately below the party floor which is built of dense concrete cast on woodwool shuttering, plastered beneath; the other floors are timber joist floors and this seems to be the only major difference in construction at different floor levels. Vibration measurements indicated that appreciable flanking transmission of sound was occurring through the ceiling in the frequency range 600 to 3000 Hz and it seems probable that the use of woodwool shuttering has led to a resonance effect producing these high vibration levels.  相似文献   

9.
Statistical Energy Analysis (SEA) is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure. This study investigates the application of the corrected SEA model in a non-reverberant acoustic space where the direct field component from the sound source dominates the total sound field rather than a diffuse field in a reverberant space which the classical SEA model assumption is based on. A corrected SEA model is proposed where the direct field component in the energy is removed and the power injected in the subsystem considers only the remaining power after the loss at first reflection. Measurement was conducted in a box divided into two rooms separated by a partition with an opening where the condition of reverberant and non-reverberant can conveniently be controlled. In the case of a non-reverberant space where acoustic material was installed inside the wall of the experimental box, the signals are corrected by eliminating the direct field component in the measured impulse response. Using the corrected SEA model, comparison of the coupling loss factor (CLF) and damping loss factor (DLF) with the theory shows good agreement.  相似文献   

10.
The effect of distance on the peak sound pressure level and sound exposure level from an SA80 rifle has been investigated. Sound pressure waveforms were measured in two directions from the gun: downrange, from 50 m to 300 m, and to the left-hand side, from 0.3 m to 32 m. Some additional measurements were made to the right of the gun. Measurements made downrange showed three distinct features of the waveform; the shock wave from the supersonic bullet, the reflection from the ground, and the muzzle blast. The time elapsed between the shock wave and the muzzle blast increased with increasing distance: 94 ms for a distance of 50 m, and 507 ms for a distance of 300 m. The highest peak sound level downrange from a single round was between 151 dB(C) and 148 dB(C) at distances from 50 m to 300 m, and varied little if at all with distance. To the left of the gun, the peak sound pressure level of 161 dB(C) at 0.3 m reduced to 128 dB(C) at 32 m. The peak sound pressure level was estimated to be 137 dB(C) at a distance of approximately 20 m to the left-hand side. Hearing protection must therefore be worn by anyone closer than 20 m to a person firing. The peak sound pressure level was estimated to be 135 dB(C) at a distance of approximately 25 m and therefore hearing protection is recommended at distances of up to 25 m. The sound exposure level of 98 dB(A) at 20 m indicated that an observer at this distance could hear about 1440 rounds without hearing protection before the noise exposure reached the upper exposure action value specified in the Control of Noise at Work Regulations 2005. Peak sound pressure levels were on average 2.4 dB higher at the left ear compared with the right ear.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号