一种新型自激发布里渊掺铒光纤激光器

利用级联的受激布里渊效应,自激发布里渊掺铒光纤激光器可以实现常温下的多波长激光输出。通过在自激发掺铒光纤激光器中引入一个高双折射萨尼亚克(Sagnac)环形滤波器,调节萨尼亚克环形滤波器的偏振控制器(PC),实现了可调谐多波长输出,同时在实验中观测到双布里渊多波长带的现象。研究了这种光纤激光器中萨尼亚克环形滤波器的带宽和980 nm抽运光功率对输出波长数的影响,在萨尼亚克环形滤波器的带宽为83.3 nm以及980 nm抽运光功率为260 mW时,得到了52个间隔为0.088 nm的多波长激光输出。     

间隔0.173nm的可调谐多波长布里渊掺铒光纤激光器

使用四端口环行器和可调谐滤波器,设计了一种间隔为双倍布里渊频移的多波长布里渊掺铒光纤激光器.该光纤激光器中使用的四端口环形器可以限制奇次阶斯托克斯光在腔内循环并耦合输出初始泵浦光和偶次阶斯托克斯光,而可调滤波器抑制环形腔所形成的自激振荡模,增加了激发多波长激光的功率,从而增加多波长输出个数及其调谐范围.在布里渊泵浦功率为8dBm、980nm泵浦功率为279mW时,实验获得波长间隔为0.173nm的6个波长的激光输出,输出激光的可调谐范围为28nm.     

基于SOA和级联取样光纤光栅的多波长激光器

研究了基于半导体光放大器(SOA)和双段级联取样光纤光栅构成的新型结构多波长激光器.设 计了取样光纤光栅，计算了其反射谱，模拟了多波长激光器的输出光谱.基于自行制作的SOA 和取样光纤光栅，进行了多波长激光器的实验研究，得到了间隔为0.8nm、输出功率不平坦 度小于1.0dB的11个波长输出.理论和实验两个方面都可以验证：与基于普通取样光栅的多波 长方案相比，基于双段级联取样光栅的方案能改善输出谱平坦度，并可提高可激射波长数. 关键词： 半导体光放大器 取样光纤光栅 多波长激光器     

基于受激布里渊散射的波长间隔可变多波长光纤激光器

提出了一个基于自激发受激布里渊散射的波长间隔可变多波长光纤激光器.利用单模光纤中自激发产生的非线性布里渊增益和掺铒光纤的线性增益组成混合增益光纤激光器,从而使光纤激光器在室温下产生稳定的多波长输出.改变双折射光纤环镜滤波器中保偏光纤的长度,可以实现波长间隔可变多波长激光产生,提高了多波长光纤激光器操作的灵活性和实用性.实验实现了波长间隔从0.8nm至0.076nm可变的多波长激光产生,波长数随波长间隔减小而增加,间隔为0.08nm的激光波长数达86.     

基于受激布里渊散射的波长间隔可变多波长光纤激光器

提出了一个基于自激发受激布里渊散射的波长间隔可变多波长光纤激光器.利用单模光纤中自激发产生的非线性布里渊增益和掺铒光纤的线性增益组成混合增益光纤激光器,从而使光纤激光器在室温下产生稳定的多波长输出.改变双折射光纤环镜滤波器中保偏光纤的长度,可以实现波长间隔可变多波长激光产生,提高了多波长光纤激光器操作的灵活性和实用性.实验实现了波长间隔从0.8 nm至0.076 nm可变的多波长激光产生,波长数随波长间隔减小而增加,间隔为0.08 nm的激光波长数达86.     

在ITU波长上的多波长光纤激光器

实验演示了一种基于半导体光放大器的多波长光纤激光器,其输出波长在ITU的波长上。使用环形腔结构,应用光纤Fabry-Perot标准具来获得ITU波长间隔,同时获得了上百条激光谱线的输出,在60nm范围的功率波动小于5dBm。     

基于光纤Bragg光栅F-P滤波器及复合双环腔滤波器的单纵模掺铥光纤激光器

提出了一种基于光纤Bragg光栅Fabry-Pérot (F-P)窄带滤波器和复合双环腔滤波器的单纵模掺铥光纤激光器。通过对复合双环腔进行数值仿真并实验制作,结合光纤Bragg光栅F-P滤波器的窄带滤波特性,实现了光纤激光器的单纵模选取。激光器输出波长为1 941.56 nm,光信噪比为55.8 dB,70 min内的波长和功率波动分别小于0.019 nm和1.464 dB。由自制的基于非平衡迈克尔逊干涉仪线宽测试系统测量了所提出的掺铥光纤激光器输出单纵模激光的频率噪声特性,并用β线方法由频率噪声谱估计了不同测量时间下的激光线宽,2 ms测量时间下的典型激光线宽值为14.194 kHz。     

同带抽运高效率光纤放大器

以光纤光栅为谐振腔搭建了波长为1020 nm的光纤激光器,并通过两级级联放大获得了590 mW的最大输出功率. 利用获得的波长为1020 nm的激光进行了波长为1064 nm种子光同带抽运放大,实验研究了不同增益光纤长度时放大器的输出功率和转换效率. 当增益光纤长度为8.5 m时,放大器最大输出功率为385 mW,斜率效率为81%. 进行了波长为976 nm的半导体激光器直接抽运波长为1064 nm种子光的实验. 在增益光纤长度最优时,其斜率效率为56.4%. 实验结果表明,同带抽运方式比传统抽运方式具有更高的转换效率. 研究结果可为波长为1020 nm的激光高功率放大和波长为1064 nm的光纤激光高功率同带抽运放大提供一定的参考. 关键词： 同带抽运 光纤放大器 斜率效率     

500 kHz高速扫频光源的研制

基于半导体光放大器和高速光纤法布里-珀罗滤波器,搭建了一个用于产生高速扫频激光的短环形腔。滤波器从长波到短波扫描时,关闭半导体光放大器的偏置电流,可以获得50%占空比的扫频激光。借助交织器,可以获得占空比为100%的扫频激光。再利用二级半导体光放大器,可以进一步提高扫频激光的输出功率。经测试,本扫频激光的扫描频率为500 kHz,中心波长为1550 nm,扫描范围达到67 nm,有效相干长度为6.5 mm,平均输出功率大于20 mW。     

基于多模光纤滤波器的可调谐掺铒光纤激光器

研究了一种新型、全光纤、宽带可调谐环形腔掺铒光纤激光器。该激光器利用由单模-多模-单模光纤组成的滤波器实现波长可调谐及激光器的全光纤结构。该滤波器将多模光纤缠绕在偏振控制器上,两端分别与一段单模光纤相连,通过调整偏振控制器的状态,实现了中心波长1542～1560nm的不同激光输出。单波长连续可调谐激光器的波长可调范围为18nm,边模抑制比大于40dB,3dB线宽为0.096nm;进一步调整偏振控制器的状态和抽运功率,实验同时得到了连续可调谐的双波长、三波长等多波长激光输出。对于可调谐的多波长激光器,通过调整偏振控制器的状态,可实现波长间隔及输出中心波长两者可调。     

Stable multiwavelength fiber ring laser with equalized power spectrum based on a semiconductor optical amplifier

We experimentally demonstrated a new structure of a multiwavelength semiconductor optical amplifier (SOA) ring laser based on a fiber Sagnac loop filter that can generate up to 25 stable output lasing wavelengths at room temperature. By varying the length of a polarization-maintaining (PM) fiber within the Sagnac loop filter, the wavelength spacing between the output lasing wavelengths can be changed to a desired value. By tuning a polarization controller (PC) within the Sagnac loop filter, stable multiwavelength 1550-nm operation with up to 17 lasing lines within 3 dB power level variation and with a wavelength spacing of ∼0.8 nm was achieved. The optical signal-to-noise ratios (OSNRs) of all the lasing wavelengths are greater than 40 dB.     

Multiwavelength fiber ring lasing by use of a semiconductor optical amplifier

A multiwavelength fiber ring laser obtained by use of a semiconductor optical amplifier (SOA) with a simple laser cavity configuration is reported. A Fabry-Perot filter was used in the fiber laser ring cavity to achieve more than 50 simultaneous wavelength lasing oscillations with a frequency separation of 50 GHz. The resulting stable broadband multiwavelength lasing operation was attributed to broadband and flat gain of the SOA, which has a gain flatness of 0.8 dB for more than 20 nm. The laser has a total output power of -3 dBm and a signal-to-spontaneous-noise ratio of 30 dB.     

Multiwavelength fiber laser using S-band erbium-doped fiber amplifier and semiconductor optical amplifier

A multiwavelength fiber ring laser that is based on an S-band erbium-doped fiber amplifier (EDFA) and a semiconductor optical amplifier (SOA) is developed. An optical switch is used to switch the multiwavelength fiber laser between S-band and L-band. This fiber laser can stably lase seven wavelengths in the S-band or 28 wavelengths in the L-band. Additionally, the lasing wavelengths with a signal-to-noise ratio of over 33 dB and a wavelength spacing of 100 GHz are demonstrated experimentally. The average powers of the lasing wavelength in the S-band and the L-band are −7.53 and −12.15 dBm, respectively.     

Tunable 12×10 GHz mode-locked semiconductor fiber laser incorporating a Mach-Zehnder interferometer filter

A stable multiwavelength mode-locked semiconductor fiber ring laser incorporating a fiber Mach-Zehnder interferometer (MZI) filter was proposed and experimentally demonstrated. A semiconductor optical amplifier (SOA) serves as an optically controlled mode-locking element due to gain exhaustion caused by external injected optical pulses. Another SOA severs as a constant-gain medium. A fiber MZI filter with a temperature control is incorporated into the fiber ring cavity to acquire a stable and tunable multiwavelength oscillation. Twelve wavelengths are synchronously mode-locked at 10 GHz, pulse width of mode-locked pulse are about 30 ps. Proposed multiwavelength mode-locked semiconductor fiber ring laser has some distinct advantages, such as simple and compact structure, easy integration, convenient tuning, good stability, potential high repetition rate operating, which has potential application in the future WDM communication system.     

A stable multiwavelength SOA-based fiber ring laser with ultra-narrow wavelength spacing

This investigation demonstrates a stable multiwavelength fiber ring laser with ultra-narrow wavelength spacing using a semiconductor optical amplifier (SOA). A delay interferometer and a mirror are used as a double-pass interferometer to improve the signal-to-noise ratio in this experiment. Up to 181 stable lasing wavelengths with a wavelength spacing of 10.7 GHz and a signal-to-noise ratio of over 24 dB are produced at room temperature.     

Dispersion-tuned multiwavelength actively mode-locked fiber laser using a hybrid gain medium

We demonstrate a multiwavelength 10 GHz pulse source using a dispersion-tuned actively mode-locked fiber ring laser incorporated with a semiconductor optical amplifier and an erbium-doped fiber amplifier. Simultaneous seven-wavelength operation of the laser is obtained. The side-mode suppression of all wavelengths is above 30 dB. Smooth wavelength tuning is achieved over more than 12 nm by changing the modulation frequency or the length of the optical delay line. Pulse characteristics are almost constant over the entire tuning span. Wavelength spacing can also be varied from 0.9 to 10 nm by adjusting the dispersion of the cavity. These experimental observations agree well with theoretical analyses.     

Tunable multi-wavelength fiber ring laser based on a Hi-Bi fiber loop mirror

A novel tunable multi-wavelength fiber ring laser based on semiconductor optical amplifier(SOA)is proposed by using a high-birefringence(Hi-Bi)fiber loop mirror(FLM)as wavelength filter.With this configuration,the wavelength spacing of this laser can be varied by using the different lengths of Hi-Bi fiber.8 wavelengths spacing on 450 GHz are experimentally obtained with more than 25-dB signal-to-noise ratio(SNR)for each channel using 1.28-m Hi-Bi fiber in Hi-Bi FLM.The output power variation between different channels is measured to be less than 5.9 dB.The linewidth of each channel is compressed from 0.347 to 0.186 nm by 1.5-m unpumped erbium-doped fiber(EDF).Meanwhile,17 wavelengths spacing on ITU-gird(100 GHz)are also obtained with 5.9-m Hi-Bi fiber in Hi-Bi FLM.All these channels can be tuned together over 0.4 nm.     

Wavelength-spacing continuously tunable multi-wavelength SOA-fiber ring laser based on Mach–Zehnder interferometer

A Mach–Zehnder interferometer (MZI) which is used as a wavelength-spacing tunable comb filter in a fiber ring laser is built by employing an optical variable delay line (OVDL). Stable multi-wavelength semiconductor optical amplifier (SOA)-fiber ring laser based on an SOA and the MZI comb filter is achieved. Wavelength spacing can be continuously tuned by adjusting the OVDL and, as an example, multi-wavelength lasing with the wavelength spacing of 0.4, 0.8, or 1.6 nm is demonstrated. The output of the proposed multi-wavelength SOA-fiber ring laser is quite stable at room temperature and the output spectrum can be adjusted by controlling the bias current of the SOA.     

Tunable multiwavelength SOA-fiber ring laser based on Sagnac loop mirror incorporating few-mode high birefringence fiber

A tunable multiwavelength fiber ring laser based on a semiconductor optical amplifier and Sagnac loop mirror incorporating a piece of few-mode high birefringence fiber (FM-HBF) is proposed and experimentally demonstrated. It is accomplished by simply adjusting a polarization controller in the Sagnac loop mirror because birefringence of the FM-HBF is polarization dependent. Tunable multiwavelength operation up to 11 oscillating lines at about 2.1 nm interval is stably achieved with an optical side-mode suppression ratio over 35 dB.     

82-channel multi-wavelength comb generation in a SOA fiber ring laser

We demonstrate a multi-wavelength semiconductor optical amplifier (SOA) fiber ring laser with a dual-pass Mach-Zehnder interferometer (MZI) filter. Two SOAs with different gain spectra provide sufficient gain and a wider gain spectrum to facilitate multi-wavelength lasing. The dual-pass MZI, configured by adding an optical isolator to the two outputs of the conventional MZI, serves as comb filter for multi-wavelength operation, and its extinction ratio can be enhanced to twofold as that of the conventional MZI in the same parameters. To investigate the influences of a dual-pass MZI filter and a conventional MZI filter on multi-wavelength operation, two different cavity configurations are presented and compared, including a single-SOA ring cavity and a double-SOA ring cavity. Stable simultaneous operation at 82 wavelengths, with a wavelength spacing of 40 GHz and a power deviation of 5 dB, and with a minimum optical signal-to-noise ratio (OSNR) of 28 dB, is observed from the double-SOA ring cavity using a dual-pass MZI filter.