Spectrofluorimetric Determination of Dopamine Using Chlorosulfonylthenoyltrifluoroacetone–Europium Probe

A new spectrofluorimetric method was developed for the determination of trace amounts of dopamine (DA). Using chlorosulfonylthenoyltrifluoroacetone (CTTA)–europium ion (Eu³⁺) as a fluorescent probe, in a buffer solution at pH = 10.0, DA can remarkably enhance the fluorescence intensity of the CTTA-Eu³⁺ complex at λ = 612 nm; the enhanced fluorescence intensity of Eu³⁺ is proportional to the concentration of DA. Optimum conditions for the determination of DA were also investigated. The linear range and detection limit for the determination of DA were 5.0 × 10⁻⁸∼1.6 × 10⁻⁵ mol/l and 3.2 × 10⁻⁸ mol/l. This method is simple, practical and relatively free of interference from coexisting substances, and can be applied to assess DA in injection and human serum samples with good precision and accuracy.     

Determination of Paracetamol Based on its Quenching Effect on the Photoluminescence of CdTe Fluorescence Probes

L-Cysteine capped CdTe nanoparticles (NPs) were synthesized in aqueous medium, and their application as fluorescence probes in the determination of paracetamol was studied. The L-cysteine capped CdTe NPs were characterized by transmission electron microscopy, X-ray diffraction spectrometry, spectrofluorometry, ultraviolet-visible and Fourier transform infrared spectrometry. Based on the distinct fluorescence quenching of CdTe fluorescence probes in the presence of paracetamol, a simple, rapid and specific method for paracetamol determination was presented. Under optimum conditions, the relative fluorescence intensity of CdTe NPs was linearly proportional to paracetamol concentration from 1.0 × 10⁻⁸ mol/L to 1.6 × 10⁻⁷ mol/L with a detection limit of 4.2 × 10⁻⁹ mol/L. The proposed method was applied to detect paracetamol in commercial tablets with satisfactory results.     

Fluorescence Enhancement Effect for the Determination of Polychlorinated Biphenyls with Bovine Serum Albumin

A sensitive and selective method for the trace determination of 3, 3’, 4, 4’-tetrachlorobiphenyl (PCB77) by using bovine serum albumin (BSA) as a fluorescence probe was introduced. Under optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of polychlorinated biphenyls in the range of 8.9 × 10⁻⁸–5.0 × 10⁻⁶ mol L⁻¹ for PCB77, and 5.0 × 10⁻⁷–5.0 × 10⁻⁶ mol L⁻¹ for 2, 2’, 5, 5’-tetrachlorbiphenyl (PCB52). The detection limits (S/N = 3) of PCB77 and PCB52 were 2.6 × 10⁻⁸ mol L⁻¹ and 2.9 × 10⁻⁷ mol L⁻¹, respectively. Furthermore, the fluorescence enhancement mechanism was discussed in detail. Results indicated that fluorescence enhancement of the system originated from the formation of BSA-PCBs complexes. In addition, PCBs were mainly bound to the tyrosine residues in BSA molecules.     

Spectrofluorimetric Assessment of Doxycycline Hydrochloride in Pharmaceutical Tablets and Serum Sample Based on the Enhancement of the Luminescence Intensity of the Optical Sensor Sm<Superscript>3+</Superscript> Ion

A simple and sensitive spectrofluorimetric method for determination of trace amount of doxycycline hydrochloride (DC) in pharmaceutical tablets and serum samples was developed. In ammonia buffer solution of pH 8.9 the doxycycline hydrochloride can remarkably enhance the luminescence intensity of the Sm³⁺ ion in Sm³⁺- DC complex at λ_ex = 400 nm. The produced luminescence intensity of Sm³⁺- DC complex in DMSO is in proportion to the concentration of DC and used as optical sensor for its determination. The dynamic range for the determination of DC is 1 × 10⁻⁸ – 5 × 10⁻⁶ mol L⁻¹ and in case of quantum yield calculations is 7 × 10⁻⁹ – 5 × 10⁻⁶ mol L⁻¹ with detection limit of 6.5 × 10⁻¹⁰ mol L⁻¹. The enhancement mechanism of the luminescence intensity in the Sm³⁺- DC system has been also discussed. A comparison with other spectrofluorimetric methods for tetracycline derivatives in which Eu³⁺ ion is used instead of Sm³⁺ ion is also studied.     

Hydroxypropyl-β-Cyclodextrin Enhanced Determination for the Vitamin B<Subscript>12</Subscript> by Fluorescence Quenching Method

A novel fluorescence quenching method for the determination of Vitamin B₁₂(VB₁₂) had been developed. It was based on that the fluorescence intensity of erythrosine sodium(ES) could be enhanced by Hydroxypropyl-β-cyclodextrin(HP-β-CD) due to the formation of inclusion complex (HP-β-CD-ES), while the fluorescence intensity of HP-β-CD-ES was diminished after adding VB₁₂ into the system, and there was a linear relationship between the fluorescence quenching value of the system (ΔF) and the concentration of VB₁₂(c). The mechanism of the determination of VB₁₂was discussed. The results showed that under the optimal conditions, the linear range of calibration curve for the determination of VB₁₂ was 0.0∼2.1 × 10⁻⁵ mol/L, and the detection limit was 1.8×10⁻⁷ mol/ L. It could be satisfactorily applied to the determination of VB₁₂ in injections.     

Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

Sensitive Determination of Norfloxacin by the Fluorescence Probe of Terbium (III)- Sodium Dodecylbenzene Sulfonate and Its Luminescence Mechanism

The fluorescence system of the norfloxacin-Tb³⁺- sodium dodecylbenzene sulfonate (SDBS) was investigated in this paper. The experiments indicated that the fluorescence intensity of the Tb³⁺-SDBS was greatly enhanced by the norfloxacin. On the basis of the above findings, a sensitive fluorimetric method for determining the norfloxacin was established. The fluorescence intensity was measured by a 1-cm quartz cell with the excitation wavelength of 290 nm and the emission wavelength of 545 nm. The enhanced fluorescence intensity of the system (Δ F) showed a good linear relationship with the concentration of norfloxacin in the range of 5.0×10⁻⁹ mol L⁻¹–2.0×10⁻⁶ mol L⁻¹, its correlation coefficient was 0.9991 and the detection limit (S/N=3) was 1.2×10⁻⁹ mol L⁻¹. The presented method was used to determine the norfloxacin in real pharmaceutical samples. The luminescence mechanism was also discussed in detail. In the fluorescence system of the norfloxacin-Tb³⁺-SDBS, the SDBS not only acted as the surfactant, but also acted as the energy donor.     

Spectrofluorimetric Assessment of Metoclopramide Hydrochloride Using Terbium Doped in PMMA Matrix Optical Sensor

A new, simple and accurate spectrofluorimetric method for the determination of metoclopramide hydrochloride was developed. The metoclopramide hydrochloride can remarkably enhance the luminescence intensity of the Tb³⁺ ion doped in PMMA matrix at λ_ex = 360 nm in methanol at pH 6.9. The intensity of the emission band at 545 nm of Tb³⁺ ion doped in PMMA matrix is increased due to the energy transfer from metoclopramide hydrochloride to Tb³⁺ in the excited stated. The effect of different parameters, e.g., pH, temperature, Tb³⁺ concentration, foreign ions that control the fluorescence intensity of the produced ion associate was critically investigated. The calibration curve of the emission intensity at 545 nm shows linear response of metoclopramide over a concentration range of 5 × 10⁻⁵–5.0 × 10⁻⁸ M with detection limit of 8.7 × 10⁻¹⁰ M. The method was used successfully for the determination of metoclopramide in pharmaceutical preparations and human serum. The average recovery of 99.48% with standard deviation of 0.32% and 96.98% with standard deviation of 0.4%, of pharmaceutical preparations and human serum respectively, were obtained which compared will with the results obtained from standard LC method of average recovery 99.04% and standard deviation of 0.6% and average recovery of 98.19% with standard deviation of 0.6% of pharmaceutical preparations and human serum, respectively.     

Determination of Enoxacin Using Tb Composite Nanoparticles Sensitized Luminescence Method

In our study, terbium-acetylacetone (Tb-acac) composite nanoparticles have been prepared under vigorous ultrasonic irradiation. The nanoparticles are water soluble, stable and have extremely narrow emission bands and high internal quantum efficiencies. They were used as fluorescence probes in the determination of enoxacin (Enox) based on the fluorescence enhancement of nanoparticles through fluorescence resonance energy transfer (FRET). The influence of buffer solution on the fluorescence intensity was investigated. Under the optimum conditions, the fluorescence intensity of the Tb-acac-Enox system is linearly proportional to the Enox concentration in the Enox concentration range of 2 × 10⁻⁷–1 × 10⁻⁴ M. The correlation coefficient for the calibration curve was 0.9976. The limit of detection as defined by IUPAC, C _LOD = 3S _b/m (where S _b is the standard deviation of the blank signals and m is the slope of the calibration graph) was found to be 3 × 10⁻⁸ M. The relative standard deviation (RSD) for six repeated measurements of 1 × 10⁻⁴ M Enox was 1.35%. The method was applied to the determination of Enox in pharmaceutical formulation and recovery results were obtained from urine samples.     

Interaction of a New Fluorescent Probe with DNA and its Use in Determination of DNA

In this paper we reported a metal complex 1-Zn (2,5-di-[2-(3,5-bis(2-pyridylmethyl)amine-4-hydroxy-phenyl)-ethylene]-pyrazine-Zn) as a fluorescent probe sensing DNA. The result of the competitive experiment of the probe with ethidium bromide (EB) to bind DNA, absorption spectral change and polarization change in the presence and absence of DNA revealed that interaction between the probe and DNA was via intercalation. Ionic strength experiment showed the existence of electrostatic interaction as well. Scatchard plots also confirmed the combined binding modes. The fluorescence enhancement of the probe was ascribed to highly hydrophobic environment when it bound the macromolecules such as DNA, RNA or denatured DNA. The binding constant between the probe and DNA was estimated as 3.13 × 10⁷ mol⁻¹ L. The emission intensity increase was proportional to the concentration of DNA. Based on this, the probe was used to determine the concentration of calf thymus DNA (ct-DNA). The corresponding linear response ranged from 2.50 × 10⁻⁷ to 4.75 × 10⁻⁶ mol L⁻¹, and detection limit was 1.93 × 10⁻⁸ mol L⁻¹ for ct-DNA.     

Spectrofluorimetric Assessment of Chlorzoxazone and Ibuprofen in Pharmaceutical Formulations by using Eu-Tetracycline HCl Optical Sensor Doped in Sol–Gel Matrix

A novel, simple, sensitive and selective spectrofluorimetric method was developed for the determination of trace amounts of chlorzoxazone and Ibuprofen in pharmaceutical tablets using optical sensor Eu-Tetracycline HCl doped in sol–gel matrix. The chlorzoxazone or Ibuprofen can remarkably enhance the luminescence intensity of Eu-Tetracycline HCl complex doped in a sol–gel matrix in dimethylformamide (DMF) at pH 9.7 and 6.3, respectively, λ_ex = 400 nm. The enhancing of luminescence intensity peak of Eu-Tetracycline HCl complex at 617 nm is proportional to the concentration of chlorzoxazone or Ibuprofen a result that suggested profitable application as a simple optical sensor for chlorzoxazone or Ibuprofen assessment. The dynamic ranges found for the determination of chlorzoxazone and Ibuprofen concentration are 5 × 10⁻⁹–1 × 10⁻⁴ and 1 × 10⁻⁸–7 × 10⁻⁵ mol L⁻¹, and the limit of detection (LOD) and quantitation limit of detection (LOQ) are 3.1 × 10⁻¹⁰ , 9.6 × 10⁻¹⁰ and 5.6 × 10⁻¹⁰, 1.7 × 10⁻⁹ mol L⁻¹, respectively.     

The Co-luminescence Effect of Eu–Gd–Ofloxacin–SDBS System and its Analytical Application

A fluorescence enhancement phenomenon in the europium (Eu)–Ofloxacin (OF)–Sodium Dodecyl Benzene Sulfonate (SDBS) fluorescence system was observed when Gd³⁺ was added. The fluorescence intensity of the systems was measured (λ _ex/λ _em = 280/612 nm) at pH 7.8. Under optimum conditions, a linear relationship between the enhanced fluorescence intensity and the Eu³⁺ concentration in the range of 5.0 × 10⁻¹⁰ ∼ 2.0 × 10⁻⁷ mol·L⁻¹ was observed. The detection limit of Eu³⁺ was 1.46 × 10⁻¹⁰ mol·L⁻¹ (S/N = 3). This method was used for the determination of trace amounts of europium in synthetic rare earth samples with satisfactory results. In addition, the interaction mechanism is also studied.     

Studies on Interaction of Norfloxacin,Cu<Superscript>2+</Superscript>, and DNA by Spectral Methods

The interactions of norfloxacin (NFA), DNA, and Cu²⁺ are studied by fluorescence and UV-spectra method. According to the experimental results, it can be concluded that NFA can form a steady binary complex with Cu²⁺. There is a linear relationship between the Fluorescence intensity of the norfloxacin–Cu²⁺–DNA system and the concentration of DNA. And when the concentration of the NFA is 1.95×10⁻⁵ mol L⁻¹, they possess a good linearity in the concentration of DNA ranged from 4.7×10⁻⁶ to 2.8×10⁻⁵ mol L⁻¹.It is a good method due to the high sensitivity and selectivity.     

Photo-induced Fluorescence of Fluometuron in a Continuous-flow Multicommutation Assembly

This paper deals with the photo-induced fluorimetric determination of the herbicide Fluometuron with the aid of a continuous-flow assembly of the emergent and new methodology known as Multicommutation which was provided with an on-line photoreactor. Maximum fluorescence intensity was observed at basic pH solutions, 1×10⁻⁴ mol l⁻¹ NaOH, after 1.4 min of irradiation and being the maximum at λ_exc 247.0 nm and λ_em 325.0 nm. The influence of different experimental parameters either chemical (pH, surfactants presence, solvent polarity and temperature) or hydrodynamic (time of photo-degradation, size and number of different segments and flow-rate) was tested. The linear dynamic range was from 0.01 to 4.0 mg l⁻¹ of Fluometuron; the inter-day reproducibility (as R.S.D.) of the slope was 0.001% and 1.7% from the peaks intra-day reproducibility. A large series of potential interferents was studied and finally the method was applied to human urine, soil, formulation and water samples.     

Study on the New Fluorescence Enhancement System of Tb –N-(2 - Pyridinyl) Ketoacetamide-Et<Subscript>3</Subscript>N-Zn and its Application

A sensitive fluorescence enhancement system was developed for the determination of zinc (II). The fluorescence intensity of the Tb- N- (2 - Pyridinyl) ketoacetamide (PKA) system was greatly enhanced by the addition of triethylamine (Et₃N) and zinc nitrate in the methanol solution. The excitation and emission wavelengths were 329 nm and 546 nm, respectively. Under optimal conditions, the fluorescence intensities varied linearly with the concentration of Zn²⁺ in the range of 8.0×10⁻⁷−5.0×10⁻⁶ M with a detection limit of 9.9×10⁻⁸ M. The interferences of some substances were described. This method was applied to the determination of amounts of Zn²⁺ in soybean, rice, and wheat, respectively. The results showed that the proposed procedure is a high selective, simple, and rapid method to the determination of Zn²⁺ ion. The mechanism of fluorescence enhancement was also studied.     

Investigation on the Micelle-Sensitized Ce (IV) - Lornoxicam-Rh B Chemiluminescence System and its Application

Based on the micelle synergism mechanism, a simple and sensitive flow injection chemiluminescence (FI-CL) method for the assay of lornoxicam was described. The CL signal generated from the reaction of Ce (IV) with lornoxicam in acidic solution was very weak, while the interfusion of sodium dodecyl benzene sulfonate (SDBS) resulted in a highly CL intensity. Under the optimum experimental conditions, the CL intensity was proportional to lornoxicam concentration over the range 1.0 × 10⁻¹⁰–7.3 × 10⁻⁸ g/mL with a detection limit of 4.9 × 10⁻¹¹ g/mL (3σ). The relative standard deviation for 11 replicate measurements of 3.0 × 10⁻⁹ g/mL of lornoxicam was 1.9%. The proposed method was successfully applied for the assay of lornoxicam in pharmaceuticals, human serum and urine with excellent recovery. The possible mechanism of CL reaction was also discussed briefly.     

Fluorescence enhancement effect for the determination of adenosine 5'-monophosphate with 9-anthracene carboxylic acid-cetyl trimethyl ammonium bromide system

A fluorimetric method based on fluorescence enhancement effect was developed for the determination of adenosine 5′-monophosphate (AMP) with 9-anthracene carboxylic acid (9-ANCA)–cetyl trimethyl ammonium bromide (CTAB) system. Fluorescence intensity of 9-ANCA was decreased by the addition of CTAB but addition of AMP again rose the intensity of 9-ANCA gradually. The observed fluorescence enhancement is attributed to the competitive binding reaction of 9-ANCA and adenosine to CTAB. The enhancement in the fluorescence intensity was found proportional to the concentration of AMP over the range 2.0 × 10⁻⁴ to 1.2 × 10⁻³ mol dm⁻³. The ion pair complex is formed spontaneously between 9-ANCA and CTAB. Since the binding interaction is larger for the adenosine–CTAB pair, the fluorophore 9-ANCA will be released. The quantum yield of free 9-ANCA is higher therefore its fluorescence observed at 417 nm wavelength is enhanced. This mechanism of competitive molecular interaction is further confirmed by conductometric measurements. The method was applied successfully for the determination of AMP from pharmaceutical sample. The method is more selective, sensitive and relatively free from interferences.     

Influence of amplified spontaneous emission and fluorescence of β-carotene on stimulated Raman scattering of carbon disulfide

β-carotene with double fluorescence characteristics and large third-order optical nonlinearities, which is dissolved in the carbon disulfide (CS₂) as the core medium of a liquid core optical fiber (LCOF), is applied in the study of the CS₂ stimulated Raman scattering (SRS). The results of this study show that when the concentrations of solution are more than 3.72×10⁻⁷ mol/L, the amplified spontaneous emission (ASE) of β-carotene is the main factor influencing the threshold and intensity of Stokes lines; when the concentrations of solution are lower than 3.72×10⁻⁷ mol/L, the ASE disappears and the fluorescence plays the key role: The high-order Stokes lines may be observed at very low input-laser power, and the Stokes thresholds decrease as the solution concentration increases. The result may be widely used in the study of broadband stimulated radiation laser and seeding laser. Supported by the National Natural Science Foundation of China (Grant No. 10774057)     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

Preparation and Characterization of CdHgTe Nanoparticles and Their Application on the Determination of Proteins

CdHgTe nanoparticles (NPs) with the emission in the near-infrared regions were prepared in aqueous solution, and were characterized by transmission electron microscopy, X-ray diffraction spectrometry, spectrofluorometry and ultraviolet-visible spectrometry. Based on the fluorescence quenching of CdHgTe NPs in the presence of proteins, a novel method for the determination of proteins with CdHgTe NPs as a near-infrared fluorescence probe was developed. Maximum fluorescence quenching was observed with the excitation and emission wavelengths of 500 and 693 nm, respectively. Under the optimal conditions, the calibration graphs were linear in the range of 0.04 × 10⁻⁶–5.6 × 10⁻⁶ g ml⁻¹ for lysozyme (Lyz) and 0.06 × 10⁻⁶–6.1 × 10⁻⁶ g ml⁻¹ for bovine hemoglobin (BHb), respectively. The limits of detection were 13 ng ml⁻¹ for Lyz and 27 ng ml⁻¹ for BHb, respectively. Four synthetic samples were determined and the results were satisfied.