ICP-AES测定铁钕合金中Ho、Er、Tb、Tm、Cu、Mo、Nb等7种杂质元素

采用ICP－AES法同时测定了铁钕合金中Ho、Er、Tb、Tm、Cu、Mo、Nb等7种杂质元素。研究了基体元素铁、主量元素钕、镝、钴、硼对杂质元素的光谱干扰情况；选择了合适的分析线；测定了分析方法的检出限。加入回收率为90．0％－108．0％。方法准确、快速、简便。     

ICP-AES法同时测定氯化锂和氢氧化锂中七种杂质元素

本文报导了用ＩＣＰ－ＡＥＳ法同时测定ＬｉＣｌ和ＬｉＯＨ·Ｈ２Ｏ中７种杂质元素Ａｌ、Ｂａ、Ｃａ、Ｆｅ、Ｍｇ、Ｓｉ、Ｚｎ的分析方法。研究了基体元素锂对被测元素的基体效应，采用基体匹配法与背景扣除法进行校正。被测元素的检出限为０．１－９．４ｎｇ／ｍＬ，加标试验回收率为９２％－１０９％，当杂质元素含量为０．０００１％－０．０２８％时，相对标准偏差小于７％。方法简便、快速、准确，用于样品分析，取得了满意的结果。     

ICP-AES测定高纯氧化钽中13种杂质元素

本文提出了基体匹配校准曲线，ICP－AES法直接测定高纯氧化钽中13种杂质元素的分析方法，并考察了光谱干扰以及基体效应的影响，确定了仪器最佳工作条件。结果表明：各元素的测定下限分别小于或等于0．0005％；相对标准偏差为1．8％－11．3％；回收率为92％－108％。     

ICP-AES法测定铝合金中的Sc

本文采用ICP－AES法测定铝合金中的Sc，并讨论了基体元素及共存元素对Sc的干扰，进行了酸度试验，采用盐酸和硝酸溶解试样，回收率为96．0％－101．0％，RSD为0．31％－0．59％，方法简便，可靠，可获得满意的分析结果。     

ICP—AES法测定高纯二氧化锆中痕量杂质

介绍了高纯二氧化锆中痕量杂质元素Ｆｅ，Ｎａ，Ｓｉ，Ｔｉ的ＩＣＰ－ＡＥＳ测定方法。样品以浓Ｈ２ＳＯ４及（ＮＨ４）２ＳＯ４溶解，采用空白背景校正法消除基体Ｚｒ的光谱干扰，以基体匹配法补偿基体效应。各元素平均回收率为９５％－１０６％，相对标准偏差为１．３％－３．０％。     

金属铝中杂质元素的测定及其基体影响的研讨

提出了一种能同时测定金属铝中杂质元素Ｃｕ＇Ｍｎ，Ｍｇ，Ｚｎ，Ｃｒ，Ｎｉ，Ｖ，Ｔｉ，Ｆｅ，Ｓ的ＩＣＰ－ＡＥＳ分析方法，实验考察了金属铝基体，共存元素、不同溶剂等因素驿分析元素测试结果的影响，选择了仪器最佳工作条件。结果表明，当金属铝基体的纯度为９６．００％－９９．９０％时，分析元素的回收率在９５－１０５．０５之间。相对标准偏差ＲＳＤ均小于０．５％。在金属铝进出口商品检验中已获得满意的结果。     

ICP-AES法测定铁钕合金中主量元素钕及7种杂质元素的研究

用ICP－AES法同时测定了铁钕合金中主量元素钕及Al、Si、Mn、Cr、Mg、Zr、Ca等7种杂质元素。研究了基体元素铁、主量元素钕对杂质元素的光谱干扰,选择了合适的分析线和内标线,测定了分析方法的检出限,回收率为87％－113％。方法准确、快速、简便,结果令人满意。     

出口镁质耐火材料的ICP-AES测定

本文采用和LI2B4O7熔样、MgO基体匹配、ICP－AES法同时测定出口镁质耐火材料的主要成分及杂质元素。RSD＜2．7％，加标回收率为97．6％。方法快速、简便，结果准确。     

高纯La-Ni-Al合金成分及杂质元素的分析方法研究

叙述了镧－镍－铝（La-Ni-Al)合金分镍、铝及微量杂质元素锌、铁、锰、镁、硅、铜和钙的ICP－AES测定方法。样品以HNO3（1＋1）溶解,稀释后直接测定主量元素镍和铝;用基体匹配法补偿基体效应测定其他杂质元素。各元素回收率在95％－106％,相对标准偏差优于5％。     

ICP-AES测定镁合金中的痕量Zr、Fe、Ni

用ICP－AES同时测定了镁合金中痕量Zr,Fe,Ni等杂质元素，不采用基体匹配法，研究了基体元素和共存元素对分析元素的光谱干扰，并进行了加入回收试验，精密度试验和方法检出限的测定。方法准确可靠，简便快速。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.