An acoustic intensity-based method for reconstruction of radiated fields

An acoustic intensity-based method is proposed for the reconstruction of acoustic radiation pressure. Unlike the traditional inverse acoustic methods, the proposed method includes the acoustic pressure gradient as an input in addition to its simultaneous, co-located acoustic pressure in a radiated field. As a result, the reconstruction of acoustic radiation pressure from the input acoustic data over a portion of a surface enclosing all the acoustic sources, i.e., an open surface, becomes unique due to the unique continuation theory of elliptic equations. Hence the method is more stable and the reconstructed acoustic pressure is less dependable on the locations of the input acoustic data. Furthermore, the proposed method can be applied for both inverse and forward problems up to the minimum sphere enclosing the sources of interest. The effectiveness of the method is demonstrated by the results of several acoustic radiation examples with single or multi-frequency source in a two-dimensional configuration. The results from the method also show a measurable improvement in accuracy and consistency of reconstructed acoustic radiation pressure, in particular when the effect of the signal-to-noise ratio is included.     

Electroacoustic absorbers: bridging the gap between shunt loudspeakers and active sound absorption

The acoustic impedance at the diaphragm of an electroacoustic transducer can be varied using a range of basic electrical control strategies, amongst which are electrical shunt circuits. These passive shunt techniques are compared to active acoustic feedback techniques for controlling the acoustic impedance of an electroacoustic transducer. The formulation of feedback-based acoustic impedance control reveals formal analogies with shunt strategies, and highlights an original method for synthesizing electric networks ("shunts") with positive or negative components, bridging the gap between passive and active acoustic impedance control. This paper describes the theory unifying all these passive and active acoustic impedance control strategies, introducing the concept of electroacoustic absorbers. The equivalence between shunts and active control is first formalized through the introduction of a one-degree-of-freedom acoustic resonator accounting for both electric shunts and acoustic feedbacks. Conversely, electric networks mimicking the performances of active feedback techniques are introduced, identifying shunts with active impedance control. Simulated acoustic performances are presented, with an emphasis on formal analogies between the different control techniques. Examples of electric shunts are proposed for active sound absorption. Experimental assessments are then presented, and the paper concludes with a general discussion on the concept and potential improvements.     

Physically Realizable Broadband Acoustic Metamaterials with Anisotropic Density

Transformation acoustics are concentrated for the purpose of designing novel acoustic devices to tailor acoustic waves to achieve desirable characteristics. However, these devices require fluid or fluid-like materials with an anisotropic density that generally does not exist in nature. Therefore, we introduce pentamode metamaterials into an alternating multilayer isotropic medium model to build fluid-like metamaterials with an anisotropic density. A 2D acoustic bending based on transformation acoustics is established and investigated to verify our method. This idea provides a method to design broadband and physically realizable acoustic metamaterials with an anisotropic density and is meaningful for the design of acoustic metamaterials.     

单向声传播结构研究

受到电子二极管整流效应的启发,对单向声传播结构展开了一系列的理论与实验研究：将超晶格结构与非线性声学材料组合构成了可实现声整流效应的声二极管结构;通过将反对称弹性结构引入到复合结构板来产生Lamb波的不对称模式转化,设计了可实现Lamb波单向传播的线性声学结构;基于声子晶体的部分禁带特性,在有限尺度声学系统中设计并实现了单向声学波导结构;设计并实现了由纯板与声栅构成的声单向传播结构,具有小尺寸与高效率的特点,且声波出射角度可调;基于声学梯度材料设计了可在极宽频带内实现不对称声传播的声学结构。     

Location of acoustic emission sources generated by air flow

The location of continuous acoustic emission sources is a difficult problem of non-destructive testing. This article describes one-dimensional location of continuous acoustic emission sources by using an intelligent locator. The intelligent locator solves a location problem based on learning from examples. To verify whether continuous acoustic emission caused by leakage air flow can be located accurately by the intelligent locator, an experiment on a thin aluminum band was performed. Results show that it is possible to determine an accurate location by using a combination of a cross-correlation function with an appropriate bandpass filter. By using this combination, discrete and continuous acoustic emission sources can be located by using discrete acoustic emission sources for locator learning.     

Acoustic Absorption Characteristics of New Underwater Omnidirectional Absorber

We investigate a new underwater omnidirectional absorber with acoustic black hole effect to realize a broadband omnidirectional acoustic wave absorption. Based on multiple scattering theory, a two-dimensional axisymmetric model of underwater omnidirectional absorber comprised of an acoustic gradient refractive index structure and a hollow core is developed, and the mechanisms of omnidirectional absorption and dissipation of acoustic waves are studied. The numerical results indicate that the omnidirectional absorber developed here can achieve the omnidirectional absorption of incident acoustic waves in a broadband frequency and can effectively reduce the backscattering of acoustic waves. It potentially provides a new notion for underwater acoustic coating design.     

Interaction of surface acoustic waves with moving vortex structures in superconducting films

A method is proposed for describing a moving film vortex structure and its interaction with surface acoustic waves. It is shown that the moving vortex structure can amplify (generate) surface acoustic waves. In contrast to a similar effect in semiconductor films, this effect can appear when the velocity of the vortex structure is much lower than the velocity of the surface acoustic waves. A unidirectional collective mode is shown to exist in the moving vortex structure. This mode gives rise to an acoustic analogue of the diode effect that is resonant in the velocity of the vortex structure. This acoustic effect is manifested as an anomalous attenuation of the surface acoustic waves in the direction of the vortex-structure motion and as the absence of this attenuation for the propagation in the opposite direction.     

Acoustic Signal Typing for Evaluation of Voice Quality in Tracheoesophageal Speech

SUMMARY: Because of the aperiodicity of many tracheoesophageal voices, acoustic analysis of the tracheoesophageal voice is less straightforward than that of the normal voice. This study presents the development and testing of an acoustic signal typing system based on visual inspection of a narrow-band spectrogram that can be used by researchers for classification of voice quality in tracheoesophageal speech. In addition to this classification system, a selection of acoustic measures [median fundamental frequency, standard deviation of fundamental frequency, jitter, percentage of voiced (%Voiced), harmonics-to-noise ratio (HNR), glottal-to-noise excitation (GNE) ratio, and band energy difference (BED)] was computed to provide more insight into the acoustic components of tracheoesophageal voice quality. For clinical relevance, relationships between the acoustic signal types and an overall judgment of the voice were investigated as well. Results showed that the four acoustic signal types form a good basis for performing more acoustic analyses and give a good impression of the overall quality of the voice.     

Localisation and phase transition of acoustic waves in a soft medium containing air bubbles

We study via numerical experiments the localisation property of an acoustic wave in a viscoelastic soft medium containing randomly-distributed air bubbles. The behaviours of the oscillation phases of bubbles are particularly investigated in various cases for distinguishing efficiently the acoustic localisation from the effects of acoustic absorption caused by the viscosity of medium. The numerical results reveal the phenomenon of `phase transition' characterized by an unusual collective oscillation of bubbles, which is an effective criterion to unambiguously identify the acoustic localisation in the presence of viscosity. Within the localisation region, the phenomenon of phase transition persists, and a remarkable decrease in the fluctuation of the oscillation phases of bubbles is observed. The localisation phenomenon will be impaired by the enhancement of the viscosity factors, and the extent to which the acoustic wave is localised may be determined by appropriately analyzing the values of the oscillation phases or the amount of reduction of the phase fluctuation. The results are particularly significant for the practical experiments in an attempt to observe the acoustic localisation in such a medium, which is in general subjected to the interference of the great ambiguity resulting from the effect of acoustic absorption.     

Manipulation with sound and vibration: A review on the micromanipulation system based on sub-MHz acoustic waves

Manipulation of micro-objects have been playing an essential role in biochemical analysis or clinical diagnostics. Among the diverse technologies for micromanipulation, acoustic methods show the advantages of good biocompatibility, wide tunability, a label-free and contactless manner. Thus, acoustic micromanipulations have been widely exploited in micro-analysis systems. In this article, we reviewed the acoustic micromanipulation systems that were actuated by sub-MHz acoustic waves. In contrast to the high-frequency range, the acoustic microsystems operating at sub-MHz acoustic frequency are more accessible, whose acoustic sources are at low cost and even available from daily acoustic devices (e.g. buzzers, speakers, piezoelectric plates). The broad availability, with the addition of the advantages of acoustic micromanipulation, make sub-MHz microsystems promising for a variety of biomedical applications. Here, we review recent progresses in sub-MHz acoustic micromanipulation technologies, focusing on their applications in biomedical fields. These technologies are based on the basic acoustic phenomenon, such as cavitation, acoustic radiation force, and acoustic streaming. And categorized by their applications, we introduce these systems for mixing, pumping and droplet generation, separation and enrichment, patterning, rotation, propulsion and actuation. The diverse applications of these systems hold great promise for a wide range of enhancements in biomedicines and attract increasing interest for further investigation.     

高对称型声子晶体自准直弯曲及分束

基于二维六方晶格声子晶体的高对称性, 通过裁剪声子晶体模型, 实现声波自准直束60°和120°全反射弯曲, 证实点源声波的准直弯曲和亚波长成像. 在六方晶格声子晶体中引入线缺陷, 实现自准直束的60°和120°弯曲及分裂, 详细分析了缺陷尺寸对入射准直束的60°(或120°)弯曲声束与透射声束能量分配的影响. 本文的工作可以使基于自准直效应的应用更加灵活.     

Modification of the parabolic approximation in the theory of ultrasonic-beam diffraction in a strongly anisotropic crystal

A modification of the parabolic approximation of the diffraction theory is based on the approximation of the wave surface with allowance for the shape of the angular spectrum of the ultrasonic beam. It is demonstrated that such an approach is more accurate in the analysis of the acoustic field at a relatively high diffraction divergence and/or high acoustic anisotropy. An acoustic field is simulated in paratellurite, which is a leading acoustic material with anomalously high acoustic anisotropy.     

Schlieren成像和声场可视化

Schlieren技术是利用声场引起透明媒质光折射率的变化而实现声场可视化的光学成像技术。它具有对声场无干扰、快速、瞬态成像的特点。本文利用二维光学Fourier变换分析了Schlieren技术的成像原理,在采用连续激光和高速ICCD的Schlieren成像系统中,实验研究了平面波声场和线聚焦声场中换能器光学校准方法和声压的定量检测技术。发展声场瞬态和动态成像技术,观测了声波的聚焦过程和固-液界面的声场分布和变化。这些结果表明Schlieren技术是一种有效的声场可视化和定量检测的光学成像技术。     

Using Helmholtz resonator arrays to improve dipole transmission efficiency in waveguide

It is well known that the radiation efficiency of an acoustic dipole is very low, increasing the radiation efficiency of an acoustic dipole is a difficult task, especially in an ordinary waveguide.In addition, current acoustic superlenses all utilize in-phase sources to do the super-resolution imaging, it is almost impossible to realize super-resolution imaging of an acoustic dipole.In this paper, after using the Helmholtz resonator arrays(HRAs) which are placed at the upper and lower surfaces of the waveguide, we observe a large dipole radiation efficiency at the certain frequency, which gives a method to observe an acoustic dipole in the far field and offers a novel model which is promising to realize the superlens with a source of an acoustic dipole.We discuss how the arrangement of HRAs affects the transmission of the acoustic dipole.     

Quantification of a multibeam sonar for fisheries assessment applications

The acoustic theory is developed for a multibeam fisheries-type sonar employing a circular arc of transducer elements. Specifically, numerical relations for transmit and receive beam patterns are derived and methodologies set forth for the derivation of appropriately scaled acoustic target strength and acoustic volume backscattering strength from an ideally performing multibeam device. Predicted and measured beam characteristics of a realizable multibeam sonar, a Kongsberg Simrad-Mesotech SM 2000, are compared. Practical techniques for the extraction of calibrated acoustic volume backscattering strength from real systems are advanced.     

Existence of traveling wave solutions of a high-order nonlinear acoustic wave equation

In this Letter, we present an analytical study of a high-order acoustic wave equation in one dimension, and reformulate a previously given equation in terms of an expansion of the acoustic Mach number. We search for non-trivial traveling wave solutions to this equation, and also discuss the accuracy of acoustic wave equations in terms of the range of Mach numbers for which they are valid.     

The acoustic detection of high-energy particles in water

The acoustic pulse from an electromagnetic cascade produced by a high-energy particle in water is investigated. An expression which demonstrates the possibilities for acoustic detection of high-energy particles is presented. (The acoustic variant of the DUMAND project.)     

Optimal Acoustic Attenuation of Weakly Compressible Media Permeated with Air Bubbles

Based on fuzzy logic （FL） and genetic algorithm （GA）, we present an optimization method to obtain the optimal acoustic attenuation of a longitudinal acoustic wave propagating in a weakly compressible medium permeated with air bubbles. In the optimization, the parameters of the size distribution of bubbles in the medium are optimized for providing uniformly high acoustic attenuation in the frequency band of interest. Compared with other traditional optimization methods, the unique advantage of the present method is that it can locate the global optimum quickly and effectively in need of knowing the mathematical model precisely. As illustrated by a numerical simulation, the method is effective and essential in enhancing the acoustic attenuation of such a medium in an optimal manner. The bubbly medium with optimized structural parameters can effectively attenuate longitudinal waves at intermediate frequencies with an acoustic attenuation approximating a constant value of lO（dB/cm）. Such bubbly media with optimal acoustic attenuations may be applied to design acoustic absorbent by controlling broader attenuation band and higher efficiency.     

Studying acoustic-wave fields in langasite-family crystals using the BESSY II synchrotron radiation source

The process of the excitation and propagation of pseudosurface acoustic waves in crystals of the langasite family is studied via X-ray diffractometry for the first time. The investigations are carried out using the BESSY II synchrotron radiation source in the double-crystal X-ray diffractometer scheme. The process of pseudosurface acoustic wave propagation is studied based on an analysis of the diffraction spectra of acoustically modulated crystals. Both the velocities of the pseudosurface acoustic waves and the power flow angles of the acoustic energy are measured for the first time. The pseudosurface acoustic wave is shown to be flowing. Surface and pseudosurface acoustic waves generated by an interdigital transducer in the Z cut of a La₃Ga_5.5Ta_0.5O₁₄ crystal are compared.