多功能扫描质子核探针信号探测和数据获取系统

为了在一次扫描质子核探针实验中能获取多种物理信息,研制了多功能信号探测与数据获取系统。系统由组合探测器、多站多参量数据采集与束流扫描、样品台控制与显微观测三个子系统组成。组合探测器包括了Si(Li)X射线探测器,高纯Geγ射线探测器,以及Au(Si)面垒带电粒子探测器,可完成多种物理参数的同时获取。系统的核心数据采集与束流扫描系统基于NI公司的PXI-7852R数据采集卡和LabVIEW软件平台,具备了多个物理信号采集、多能谱显示以及束流扫描和二维成像等功能。六轴高精度真空样品台由计算机控制,可实现显微图像对样品的定位及对扫描区域的可视化选择。初步实验验证了该系统的可靠性与稳定性。     

光子扫描隧道显微镜的光电成像系统研究

本文论述了光子扫描隧道显微镜（ＰＳＴＭ）的显微成像机理、成像规律，针对具体的物理模型进行数值模拟计算，并得到了与实际探测相一致的场分布规律。采用自行研制的光子扫描隧道显微镜（ＰＳＴＭ）的显微实验系统对多种样品进行了表面显微成像研究，获得了关于样品表面三维立体图像信息，通过多种图像处理手段对原始图像进行后期处理，得到了更具视觉效果、更为逼真的样品表面图像。     

QR码图像预处理中的滤波研究

QR码图像采集过程中会出现椒盐噪声,为了在滤除图像椒盐噪声的同时能很好地保持图像的细节,将几种常用中值滤波方法应用到QR码的图像预处理中,进一步对其结果进行比较,得出QR码图像中值滤波的规律。据此提出利用窗口系数的新中值滤波方法,先二值化,然后进行基于滤波窗系数的中值滤波处理,经过实验比较找到一组系数。实验结果表明:将该系数的中值滤波用在QR码图像预处理中可以大大提高译码的效率和准确率。在加噪一定情况下,实验的识别率达到了100%。     

基于双螺旋点扩散函数工程的多焦点图像扫描显微

在传统共聚焦显微技术的基础上,图像扫描显微技术使用面阵探测器来代替单点探测器,结合虚拟数字针孔并利用像素重定位和解卷积图像重构算法将传统宽场显微镜的分辨率提高一倍,实现了高信噪比的超分辨共焦成像.但是,由于采用逐点扫描的方式,三维成像速度相对较慢,限制了其在活体样品成像中的应用.为了进一步提高图像扫描显微术的成像速度,本文提出了一种基于双螺旋点扩散函数工程的多焦点图像扫描显微成像方法和系统.在照明光路中,利用高速数字微镜器件产生周期分布的聚焦点阵对样品进行并行激发和快速二维扫描;在探测光路中,利用双螺旋相位片将激发点荧光信号的强度分布转换为双螺旋的形式;最终,利用后期数字重聚焦处理,从单次样品扫描数据中重构出多个样品层的超分辨宽场图像.在此基础上,利用搭建的系统分别对纤维状肌动蛋白和海拉细胞线粒体进行成像实验,证明了该方法的超分辨能力和快速三维成像能力.     

基于光程差扫描的低相干离轴数字全息术

针对在低相干离轴数字全息术中,光源相干长度限制物光波可探测面积的问题,提出了一种基于光程差扫描的低相干离轴数字全息记录方法.首先,通过改变参考光和物光波之间的光程差,使得干涉条纹扫描记录平面的不同区域,而后对各个区域的数字全息图采用数值再现的方法获取不同区域处的物光波相位分布,最后采用相位拼接技术拼接各个区域的相位分布实现物光波的全视场探测.     

光子扫描隧道显微镜球形样品二维近场强度分析

采用时域有限差分方法计算全内反射和光子扫描隧道显微镜系统。光子扫描隧道显微镜的基本工作原理是隐失波的产生和探测，当入射光在两种介质的分界面上发生全内反射，并在界面处产生非辐射的电磁波——隐失波时，采取对两界面入射光进行分别设置的方法即“三波法”设置入射激励元。分别计算一个球和两个球形样品的近场分布，并计算散射小球为探针，一个球为样品的扫描图像。结果表明：采用二维时域有限差分方法计算能较直观地显示样品表面的近场分布。表明时域有限差分方法在光子扫描隧道显微镜理论研究中具有很大潜力。     

内爆初级质子能谱直接测量方法

基于单能质子对CR39的标定实验,利用获取的响应曲线,设计了一种内爆初级质子的直接测量方法。在内爆初级质子产额较低的情况下,该方法可获得更多的计数。对实验中的噪声信号排除做出了说明,并对其背景噪声来源进行了分析,以提高实验数据的精确性。利用标定数据,对CR39上观察到的径迹进行鉴别,确定质子径迹并测量其径迹参数,从而确定质子能量。在随机扫描的约300个显微镜视场中获得了200个质子径迹数据,并通过与标定数据比对,获得了它们各自的能量,再利用蒙特卡罗程序Geant4修正铝膜的岐离,最终确认本次内爆实验初级质子的能谱峰值应该在2.4~2.6 MeV之间,据此换算到靶丸面密度为7~8mg/cm2,为实验结果的进一步后续分析提供了依据。     

基于粗糙集与小波变换的图像融合算法

粗糙集理论是处理不确定性问题的数学方法，本文提出了基于粗糙集与小波变换相结合的图像融合算法。该方法首先将粗糙集理论应用于图像滤波中，对含有椒盐噪声的图像进行粗糙中值滤波，然后对滤波后的图像进行小波融合。实验结果表明，粗糙中值滤波有较强的去噪能力，且较好地保持了图像的细节信息，在此基础上进行小波融合，使得融合结果图像具有良好的效果。     

低强度X射线影像系统的噪声分析及图像去噪处理

新型低强度X射线影像系统主要是由平板式单近贴静电聚焦X射线像增强器和CCD数据采集系统构成，根据系统的组成，分析了图像噪声来源，指出了它们的噪声整全为泊松分布规律的随机白噪声，局部也有正负脉冲干扰等特点，以此提出了处理该图像噪声的“多帧平均滤波＋极值中值滤波”的复合算法，即先根据随机噪声互不相关的特点，将多幅图像叠加平均，突出有效信息，压缩噪声。再在改进标准中值滤波基础上，采用极值中值滤波，更好地去除噪声，保留细节。通过对峰值信噪比的计算表明，该方法明优于任何单一算法，取得较好效果。     

STIM的计算机模拟

给出了建立计算机模拟STIM实验的理论模型及据此开发的软件.该软件用第4代面向对象的编程语言C++[1,2]编写而成、可在Windows 9X/NT等操作平台上运行,其界面友好,操作方便,具有良好的与用户交互的功能.该软件可方便地定义探测器的分辨率、扫描空间的分辨率、灰度或彩色调色板、样品的元素组成及其空间分布,可对在真实实验条件中存在的任意旋转角度进行扫描,还能自动完成360°旋转扫描,并将扫描的数据和图像结果存盘.该软件采用了最新的多线程处理技术[3-6],极大地提高了运行速度,并可随时暂停或终止扫描,无须等到扫描结束.同时给出了一些简单样品的模拟计算结果,并进行了分析和讨论.     

Photophysical and photochemical properties of inclusion complexes of β-cyclodextrin with aminocoumarins

B. I. Stepanov Institute of Physics, Academy of Sciences of Belarus, 70, F. Skorina Ave., Minsk, 220072, Belarus. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 62, No. 2, pp. 200–205, March–April, 1995.     

Emittance-dominated long bunches in dual harmonic RF system

The storage of long bunches for long time intervals needs flattened stationary buckets with a large bucket height. The longitudinal motion of the initially mismatched beam has been studied for both the single and dual harmonic RF systems. The RF amplitude is determined to be r.m.s wise matched. The bucket height of the single harmonic system is too small even for shorter bunch with only 20% increased energy spread. The Halo formation and even debunching can be seen after a few synchrotron periods for single particles with large amplitude. In the case of small energy spread for a cooled beam, Coulomb interaction cannot be ignored. The external voltage has to be increased to keep the r.m.s bunch length unchanged. The new voltage ratio R(N) simplifies physics for the emittance-dominated bunches with modest particle number N. For the single harmonic system, substantial amount of debunching occurs without increasing the external voltage, but very little if the RF amplitude is doubled. Results from the ORBIT tracking code are presented for the 1 GeV bunch in the HESR synchrotron, part of the GSI FAIR project.     

土壤中铅、砷、铬、铜和锌含量的连续快速测定

建立了土壤中铅、砷、铬、铜和锌含量的连续快速测定方法。土壤样品经微波消解,用同一份消解液,分别连续测定土壤中的铅、砷、铬、铜和锌含量,铬、铜和锌采用火焰原子吸收光谱法,铅和砷采用氢化物发生-原子荧光光谱法。采用本方法,对环境土壤标准样品ESS-1黑钙土(GSBZ50011)和ESS-3红壤(GSBZ50013)进行多次测定,检测结果与标样的推荐值吻合。经统计计算,回收率为95.2%—103.6%,精密度RSD均小于7%。本法操作简单快速,光谱测定结果已成功地用于无公害水果和蔬菜生产基地的土壤环境质量评价。     

Influence of substrate process tolerances on transmission characteristics of frequency-selective surface

Frequency-selective surface （FSS） is a two-dimensional periodic structure consisting of a dielectric substrate and the metal units （or apertures） arranged periodically on it. When manufacturing the substrate, its thickness and dielectric constant suffer process tolerances. This may induce the center frequency of the FSS to shift, and consequently influence its characteristics. In this paper, a bandpass FSS structure is designed. The units are the Jerusalem crosses arranged squarely. The mode-matching technique is used for simulation. The influence of the tolerances of the substrate＇s thickness and dielectric constant on the center frequency is analyzed. Results show that the tolerances of thickness and dielectric constant have different influences on the center frequency of the FSS. It is necessary to ensure the process tolerance of the dielectric constant in the design and manufacturing of the substrate in order to stabilize the center frequency.     

Optical properties of heated air, carbon dioxide, and argon

Stable-plasma generators, spectroscopic measuring equipment, and methods for determining the optical properties of an extremely heated medium with a given composition have been developed. The spectral coefficients of absorption and emission of heated air, carbon dioxide, and argon were studied. A comparison with the data of other theoretical and experimental investigations has been performed. Deceased. Institute of Molecular and Atomic Physics of the Academy of Sciences of Belarus, 70, F. Skorina Ave., Minsk, 220072, Belarus. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 6, pp. 818–826, November–December, 1997.     

Specific features of the generation of aqueous solutions of Rhodamine 6G in laser pumping

M. V. Lomonosov Moscow State University, Vorob'yovy Gory, Moscow, 119899, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 63, No. 2, pp. 236–241, March–April, 1996.     

Carrier frequency offset and impulse noise estimation for underwater acoustic orthogonal frequency division multiplexing

The carrier frequency offset（CFO）and impulse noise always affect the performance of underwater acoustic communication_systems.The CFO and impulse noise could be estimated by using the null subcarriers to cancel the effects of the two types of interference.The null subcarriers estimation methods include optimal separate estimation and joint estimation.The separate estimation firstly estimates the CFO value and then estimates the impulse noise value.However,the CFO and impulse noise always affect each other when either of them is estimated separately.The performance could be improved by using the joint estimation.The results of simulations and experiments have showed that these two optimization methods have good performance and the joint estimation has better performance than the separate estimation method.There is 3 dB performance gain at the BER value of 10~（-2）when using the joint estimation method.Thus these methods could improve the system robustness by using the CFO compensation and impulse noise suppression.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Transmission properties of one-dimensional Photonic crystals containing double-negative and single-negative materials

The transmission properties of one-dimensional photonic crystals containing double-negative and singlenegative materials are studied theoretically.A special kind of photonic band gap is found in this structure.This gap is invariant with scaling and insensitive to thickness fluctuation.But when changing the ratio of the thickness of two media.the width of the gap could be enlarged.The defect modes are analyzed by inducing a linear defect layer in the structure.It is found that the number of defect modes will increase when the thickness of the defect layer becomes larger.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.