Chitosan-ZnO/polyaniline ternary nanocomposite for high-performance supercapacitor

We report on the synthesis of chitosan-zinc oxide (ZnO)/polyaniline (CS-ZnO/PANI) ternary nanocomposites via in situ polymerization of aniline in the presence of CS-ZnO nanocomposite prepared by simple precipitation method. The structure, morphology, and physicochemical properties of prepared ternary composites are characterized by Fourier transform infrared, UV–visible, X-ray diffraction, SEM, EDXS, TEM, thermogravimetric/differential thermal analysis, and N₂ adsorption/desorption measurements. Their electrochemical properties are also investigated using cyclic voltammetry, galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy. Electrochemical measurements show that the mesoporous CS_0.12-ZnO_2.5/PANI electrode yields larger specific capacitance (587.15 F g^?1) than the corresponding PANI-ZnO electrode without added chitosan and the capacitance retention is 80 % after 1,000 charge/discharge cycles at 175 mA cm^?2 current density in the voltage range of 0 to 0.8 V vs. SCE, due to the synergistic effect among three components which result in enhanced specific capacitance and cycling stability. The resulting composites are promising electrode materials for high-performance, environmentally friendly, and low-cost electrical energy storage devices.     

Flexible polyethylene terephthalate (PET) electrodes based on single-walled carbon nanotubes (SWCNTs) for supercapacitor application

Flexible polyethylene terephthalate (PET) electrodes based on pristine single-walled carbon nanotubes (SWCNTs) and acid-treated single-walled carbon nanotubes (A-SWCNTs) were prepared by spray coating technique. Flexible A-SWCNTs electrodes showed enhanced electrochemical properties compared to the pristine SWCNTs electrodes. The electrochemical properties of the flexible A-SWCNTs electrodes were optimized with various types of aqueous electrolytes including sulfuric acid (H₂SO₄), sodium sulfate (Na₂SO₄), potassium chloride (KCl), sodium hydroxide (NaOH), and potassium hydroxide (KOH). The electrochemical performance of the A-SWCNTs electrodes as a function of bending to 30° were evaluated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge (GCD) measurements in 1 M H₂SO₄. The specific capacitance value of the unbent A-SWCNTs electrode was 67 F g^?1, which decreased to 63 F g^?1 (94% retention) after 1000 GCD cycles. Interestingly, the specific capacitance of the unbent A-SWCNTs electrode with application of the 1000 GCD cycles was retained even after 500 bending to 30° with 6000 GCD cycles.     

In Situ Synthesis and Characterization of Polypyrrole/Graphene Conductive Nanocomposites via Electrochemical Polymerization and Chemical Reduction

Polypyrrole/graphene sheets (PPy/GNs) nanocomposite electrodes were in- situ synthesized via electrochemical polymerization and chemical reduction from pyrrole (Py) and graphene oxide (GO). The surface morphologies of the nanocomposites were observed by scanning electron microscopy (SEM). The SEM results showed graphene sheets (GNs) scattered on the surface of the polypyrrole (PPy), and the morphologies of PPy/GNs nanocomposites manufactured by pulse current (PC-PPy/GNs) or direct current (DC-PPy/GNs) were smoother than that of PC-PPy. The electrochemical capacitance properties of the nanocomposite films were measured by cyclic voltammetry (CV), galvanostatic charge and discharge (GC), and electrochemical impedance spectroscopy (EIS) techniques in 3 mol·L^?1 KCl aqueous solutions. The results indicated that the specific capacitance of the DC-PPy/GNs nanocomposite was 13.5% higher than that of a PC-PPy electrode. Comparison of the electrochemical performance of the nanocomposites indicated that the PC-PPy/GNs nanocomposite had higher specific capacitance and better charging/discharging capability than that of the DC-PPy/GNs nanocomposite. The specific capacitance of the PC-PPy/GNs nanocomposite could reach to 280 F·g^?1 at a scanning rate of 100 mV·s^?1.     

A novel synthesis of size-controllable mesoporous NiMoO<Subscript>4</Subscript> nanospheres for supercapacitor applications

A novel hydrothermal emulsion method is proposed to synthesize mesoporous NiMoO₄ nanosphere electrode material. The size of sphere-shaped NiMoO₄ nanostructure is controlled by the mass ratio of water and oil phases. Nickel acetate tetrahydrate and ammonium heptamolybdate were used as nickel and molybdate precursors, respectively. The resultant mesoporous NiMoO₄ nanospheres were characterized by X-ray diffraction, N₂ adsorption and desorption, scanning electron microscopy, and transmission electron microscopy. The electrochemical performances were evaluated by cyclic voltammetry (CV), cyclic chronopotentiometry (CP), and electrochemical impedance spectroscopy (EIS) in 6 M KOH solution. The typical mesoporous NiMoO₄ nanospheres exhibit the large specific surface area of 113 m² g^?1 and high specific capacitance of 1443 F g^?1 at 1 A g^?1, an outstanding cyclic stability with a capacitance retention of 90 % after 3000 cycles of charge-discharge at a current density of 10 A g^?1, and a low resistance.     

Construction of 3D polypyrrole/CoS/graphene composite electrode with enhanced pseudocapacitive performance

Herein, 3D graphene/nickel foam (GE/NF) composite matrix was successfully fabricated by using NF as template through a self-catalytic thermal chemical vapor deposition process. By using the prepared GE/NF as substrate, CoS nanosheets were deposited via a facial one-step electrochemical deposition method. Owing to the advantage of GE in boosting the electrical contact between the electroactive host material and current collector, the as-prepared 3D CoS/GE/NF electrode demonstrated a superior capacitance value of 2308 F g^?1 at 1 A g^?1 and a high rate capability of 70.49% at 20 A g^?1. After depositing the polypyrrole (PPY) film on 3D CoS/GE/NF electrode, the electrochemical performance of CoS was further greatly improved and delivered an extremely high capacitance value of 3450 F g^?1 at 1 A g^?1, with good rate capability (62.61% at 20 A g^?1) and improved cycling stability. The enhanced electrochemical performance of PPY/CoS/GE/NF electrode is closely related to the advantage of PPY film in increasing the electrical conductivity and reinforcing the integrity of electrode.     

Hexagonal-like NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanostructure based high-performance supercapacitor electrodes

A novel approach of double hydroxide-mediated synthesis of nickel cobaltite (NiCo₂O₄) electro-active material by the hydrothermal method is reported. The obtained NiCo₂O₄ electro-active material displays the spinel cubic phase and hexagonal-like morphology. Thermogravimetry analysis confirms the thermal stability of the electrode material. The functional groups and phase formation of NiCo₂O₄ have been confirmed by FT-IR and Raman spectral analysis. The modified NiCo₂O₄ electrode exhibits the highest specific capacitance of 767.5 F g^?1 at a current density of 0.5 A g^?1 in 3 M KOH electrolyte and excellent cyclic stability (94 % capacitance retention after 1000 cycles at a high current density of 5 A g^?1). The excellent electrochemical performance of the electrode is attributed to the hexagonal-like morphology, which contributes to the rich surface electro-active sites and easy transport pathway for the ions during the electrochemical reaction. The attractive Faradic behavior of NiCo₂O₄ electrode has been ascribed to the redox contribution of Ni²⁺/Ni³⁺ and Co²⁺/Co³⁺ metal species in the alkaline medium. The symmetrical two-electrode cell has been fabricated using the NiCo₂O₄ electro-active material with excellent electrochemical properties for supercapacitor applications.     

3D porous NiMoO<Subscript>4</Subscript> nanoflakes arrays for advanced supercapacitor electrodes

In recent years, supercapacitors have been considered as one of the auspicious energy storage devices. In this work, two different kinds of mixed metal oxide NiMoO₄ nanoflakes arrays were directly grown on 3D Ni foam. The electrode exhibited high specific capacitance of 2004 F/g at the current density of 2 A/g in 6 M KOH electrolyte. Additionally, it also exhibited low equivalent series resistance of 0.62 Ω and excellent cycling stability (80% capacitance retention after 1000 cycles). With these extraordinary electrochemical properties, the electrode material can be considered as potential candidate for supercapacitor applications.     

Morphology-controlled PANI nanowire electrode by using deposition scan rate in H<Subscript>2</Subscript>SO<Subscript>4</Subscript>/PVA polymer electrolyte for electrochemical capacitor

Polyaniline (PANI) nanowire electrode was successfully prepared using electrodeposition method. The morphology, thickness, and electrochemical performance of PANI electrode can be controlled by varying the deposition scan rates. Lower deposition scan rate results in compact and aggregates of PANI nanowire morphology. The uniform nanowire of PANI was obtained at the applied scan rate of 100 mV s^?1, and it was used as symmetric electrode coupled with H₂SO₄/polyvinyl alcohol (PVA) gel electrolyte. The different concentrations of H₂SO₄ acid in polymer electrolyte have influenced the electrochemical performance as well. The optimum specific capacitance and energy density of P100 PANI electrode in 3 M H₂SO₄/PVA gel polymer electrolyte was 377 F g^?1 and 95.4 Wh kg^?1 at the scan rate of 1 mV s^?1. The good stability of the electrode in this system is applicable to many wearable electronics applications.     

Preparation and electrochemical performances of nanoporous/cracked cobalt oxide layer for supercapacitors

Nanoporous/cracked structures of cobalt oxide (Co₃O₄) electrodes were successfully fabricated by electroplating of zinc–cobalt onto previously formed TiO₂ nanotubes by anodizing of titanium, leaching of zinc in a concentrated alkaline solution and followed by drying and annealing at 400 °C. The structure and morphology of the obtained Co₃O₄ electrodes were characterized by X-ray diffraction, EDX analysis and scanning electron microscopy. The results showed that the obtained Co₃O₄ electrodes were composed of the nanoporous/cracked structures with an average pore size of about 100 nm. The electrochemical capacitive behaviors of the nanoporous Co₃O₄ electrodes were investigated by cyclic voltammetry, galvanostatic charge–discharge studies and electrochemical impedance spectroscopy in 1 M NaOH solution. The electrochemical data demonstrated that the electrodes display good capacitive behavior with a specific capacitance of 430 F g^?1 at a current density of 1.0 A g^?1 and specific capacitance retention of ca. 80 % after 10 days of being used in electrochemical experiments, indicating to be promising electroactive materials for supercapacitors. Furthermore, in comparison with electrodes prepared by simple cathodic deposition of cobalt onto TiO₂ nanotubes(without dealloying procedure), the impedance studies showed improved performances likely due to nanoporous/cracked structures of electrodes fabricated by dealloying of zinc, which provide fast ion and electron transfer routes and large reaction surface area with the ensued fast reaction kinetics.     

New insight on nanostructure assembling of high-performance electrode materials: synthesis of surface-modified hexagonal β-Ni(OH)<Subscript>2</Subscript> nanosheets as an example

Hexagonal β-Ni(OH)₂ nanosheets with thickness of ～12 nm were synthesized by a hydrothermal method at 150 °C using nickel chloride as nickel source and morpholine as alkaline. Electrodes for application in pseudocapacitor were assembled through a traditional technique: pressing a mixture of β-Ni(OH)₂ nanosheets and acetylene black onto nickel foam. Due to the hexagonal shape of rigid β-Ni(OH)₂ nanosheet and the mediation of surface-modified glycerol during electrochemical charge–discharge cycles, a nanostructure of electrode material with facile interior pathway for the transfer of electrolyte was formed. As a result, the as-formed electrodes presented high specific capacitance of 1,917 F g^?1 at current density of 1.6 A g^?1 in 3 mol L^?1 KOH solution. At high charge and discharge current density of 31.3 A g^?1, the electrodes still remained a high specific capacitance of 1,289 F g^?1. The interesting results obtained from this investigation may provide a new insight for the synthesis of electrode materials with high electrochemical performance.     

Nanocrystalline Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> electrodes for supercapattery application

Nanocrystalline Li₂TiO₃ was successfully synthesized using solid-state reaction method. The microstructural and electrochemical properties of the prepared material are systematically characterized. The X-ray diffraction pattern of the prepared material exhibits predominant (002) orientation related to the monoclinic structure with C2/c space group. HRTEM images and SAED analysis reveal the well-developed nanostructured particles with average size of ～40 nm. The electrochemical properties of the prepared sample are carried out using cyclic voltammetry (CV) and chronopotentiometry (CP) using Pt//Li₂TiO₃ cell in 1 mol L^?1 Li₂SO₄ aqueous electrolyte. The Li₂TiO₃ electrode exhibits a specific discharge capacity of 122 mAh g^?1; it can be used as anode in Li battery within the potential window 0.0–1.0 V, while investigated as a supercapacitor electrode, it delivers a specific capacitance of 317 F g^?1 at a current density of 1 mA g^?1 within the potential range ?0.4 to +0.4 V. The demonstration of both anodic and supercapacitor behavior concludes that the nanocrystalline Li₂TiO₃ is a suitable electrode material for supercapattery application.     

Correlation between the mesoporous carbon sphere with Ni(OH)<Subscript>2</Subscript> nanoparticle contents for high-performance supercapacitor electrode

Ni(OH)₂ nanoparticles were decorated on mesoporous carbon spheres (MPCS) using a simple hard template method. The MPCS were derived from sodium carboxymethyl cellulose. As-prepared MPCS/Ni(OH)₂ nanocomposites were used as electrode materials for supercapacitors. These composites exhibited better electrochemical properties than a pristine mesoporous carbon sphere owing to the synergistic effect. However, the increase in Ni(OH)₂ is not proportional to the electrochemical performance improvement. The addition of an optimal amount of Ni(OH)₂, typically 1:20 by weight (MPCS:NiCl₂·6H₂O), showed an excellent specific capacitance of 1338.296 F g^?1 at a scan rate of 5 mV s^?1. These encouraging results indicate excellent potential for the development of highly capacitive energy storage devices for practical applications.     

Hydrothermal synthesis of pure LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> from nanostructured MnO<Subscript>2</Subscript> precursors for aqueous hybrid supercapacitors

Pure LiMn₂O₄ samples with high crystallinity (LMO-1# and LMO-2#) were successfully synthesized by a facile hydrothermal method using δ-MnO₂ nanoflowers and α-MnO₂ nanowires as the precursors. The as-prepared samples were analyzed by XRD, SEM, and Brunauer-Emmett-Teller (BET), and their capacitive properties were investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge test. Two LiMn₂O₄ samples showed good capacitive behavior in aqueous hybrid supercapacitors. AC//LMO-1# and AC//LMO-2# delivered the initial specific capacitance of 45.4 and 40.7 F g^?1 in 1 M Li₂SO₄ electrolyte at a current density of 200 mA g^?1 in the potential range of 0～1.5 V, respectively. After 1000 cycles, the capacitance retention was 97.6% for AC//LMO-1# and 93.7% for AC//LMO-2#. Obviously, LMO-1# from δ-MnO₂ nanoflowers exhibited higher specific capacitance and better cycling performance than LMO-2#, so LMO-1# was more suitable as the positive electrode material in hybrid supercapacitors.     

Plasma-assisted nitrogen doping of VACNTs for efficiently enhancing the supercapacitor performance

Nitrogen doping of vertically aligned carbon nanotubes (VACNTs) using plasma-enhanced chemical vapour deposition has been investigated to improve the supercapacitance performance of CNTs. Incorporating electrochemical measurements on the open-ended nitrogen-doped CNTs, showed the achievement of 6 times improvement in the capacitance value. For nitrogen-doped CNTs on silicon substrate, specific capacitance of 60 F g^?1 was obtained in 0.5 M KCl solution, with capacity retention ratio above 90 % after cycled at 0.1 A g^?1 for 5000 cycles. Using this sample, a symmetric supercapacitance was fabricated which showed the power density of 37.5 kW kg^?1. The facile fabrication approach and its excellent capacitance improvement, propose it as an efficient technique for enhancing the supercapacitance performance of the carbon-based electrodes.     

Enhanced electrochemical properties of Al-doped bulk manganese oxides synthesized by a facile liquid-phase method

Aluminum doped MnO₂ nanoparticles were synthesized by a simple liquid-phase process using potassium permanganate as oxidation agent, glycol as reducing agent. Specific capacitance of the optimal sample electrode can reach 290 F g^?1 after 10 cycles. The electrode also exhibits excellent cycle stability, retaining 86.6 % after 1,000 cycles. The infrared absorption bands of aluminum doped manganese oxide shift to high wave number for the reason that aluminum ion has smaller nuclear charge. The doping of aluminum strengthens the Mn–O bond and decreases the aggregation degree, thus the electrochemical properties are enhanced.     

LiClO4-doped plasticized chitosan and poly(ethylene glycol) blend as biodegradable polymer electrolyte for supercapacitors

Biodegradable polymer electrolyte comprising the blend of chitosan (CS) and poly(ethylene glycol) (PEG) plasticized with ethylene carbonate and propylene carbonate, as host polymer, and lithium perchlorate (LiClO₄), as a dopant, was prepared by solution casting technique. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. The variation of conductivity and dielectric properties has been investigated as a function of polymer blend ratio, plasticizer content and LiClO₄ concentration at temperature range of 298–343 K. The DSC thermograms show two broad peaks for CS/PEG blend and increased with increase in the LiClO₄ content. The maximum conductivity has been found to be 1.1?×?10^?4 S cm^?1 at room temperature for 70:30 (CS/PEG) concentration. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The activation energy of all samples was calculated using the Arrhenius plot, and it has been found to be 0.12 to 0.38 eV. A carbon–carbon supercapacitor has been fabricated using this electrolyte, and its electrochemical characteristics and performance have been studied. The supercapacitor showed a fairly good specific capacitance of 47 F?g^?1.     

Pulsed electrodeposition of mesoporous cobalt-doped manganese dioxide as supercapacitor electrode material

Cobalt-doped MnO₂, as electrode material for supercapacitor, was synthesized by pulse electrodeposition method. The morphology and structure of the products were characterized by X-ray diffraction (XRD) and field-emission scanning electron microscope (FE-SEM). The results show that the crystal structure of the products is γ-type, and the samples reveals a porous texture composed of manganese oxide nanosheets. Cyclic voltammetry (CV), electrochemical impedance spectrometry (EIS), and galvanostatic charge–discharge tests indicate that doping cobalt has great effect on the electrochemical performance of manganese dioxide material. A specific capacitance of 354 F g^?1 is obtained when the molar ratio of Mn to Co is 200:10. After 100 charge–discharge cycles in 6 M KOH solution, the specific capacitance stabilized at 333.6 F g^?1, exhibiting excellent capacitance retention ability.     

Hierarchical porous ZnMn<Subscript>2</Subscript>O<Subscript>4</Subscript> synthesized by the sucrose-assisted combustion method for high-rate supercapacitors

A simple sucrose-assisted combustion and subsequent high-temperature calcination route have been employed to prepare hierarchical porous ZnMn₂O₄ nanostructure. When used as an electrode for supercapacitor, the ZnMn₂O₄ electrode displays a high specific capacitance of 411.75 F g^?1 at a current density of 1 A g^?1, remarkable capacitance retention rate of 64.28 % at current density of 32 A g^?1 compared with 1 A g^?1, as well as excellent cycle stability (reversible capacity retention of 88.32 % after 4000 cycles). The outstanding electrochemical performances are mainly attributed to its hierarchical porous architecture, which provides large reaction surface area, fast ion and electron transfer, and good structure stability. All these impressive results demonstrate that ZnMn₂O₄ shows promise for its application in supercapacitors.     

电化学制备钛网负载聚吡咯/石墨烯复合膜及其在超级电容器中的应用

通过电化学的方法在钛网上制备了聚吡咯与石墨烯的复合物薄膜,其过程是先在钛网上通过自组装干燥膜法附着上石墨烯氧化物膜,而后采用电化学还原的方法原位还原制备得到石墨烯膜,随后加入吡咯单体,再通过电化学聚合的方法在石墨烯的表面生长聚吡咯,得到的聚吡咯开始以颗粒的形式存在,而后随着聚合的进行得到了链状的聚吡咯.得到的复合膜有高的比表面积和导电性,可以作为电极活性材料用于超级电容器中提供赝电容,结果表明,复合膜作为电极材料的超级电容器拥有高的性能,比电容达400 F/g,并且电极的充放电稳定性高,5000次复合膜充放电循环后比电容还能保留82%,说明该材料适合于超级电容器.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.