压电陶瓷薄圆环振子径向振动的机电等效电路及其分析

本文对轴向极化压电陶瓷薄圆环的径向振动进行了研究，推出了其机电等效电路，得出了振子的共振和反共振频率方程并进行了实验验证。探讨了振子的共振和反共振频率与其材料和几何尺寸之间的依赖关系。     

应用于精密振荡器的石英晶体温度特性研究

采用一种新型压电材料精确表征方法研究了不同环境温度条件下应用于振荡器的石英材料特性变化.测量了从室温至100℃不同稳定环境温度下AT切向石英晶体材料的电子阻抗共振特性,并采用基于模拟退火优化算法的压电材料精确表征方法对电子阻抗共振特性进行了准确的拟合,计算出了AT切向石英晶体材料在不同温度下包含损耗特性的复数形式材料参数.通过研究和分析温度变化对石英晶体材料参数及其损耗特性的影响,为具有稳定温度特性的精密振荡器设计提供了理论和技术支持.     

随机激励下双稳态压电俘能系统的相干共振及实验验证

随着压电晶体材料的迅速发展, 基于压电效应的能量采集系统是俘获环境中的宽带随机振动能量的一种有效途径. 研究了有限宽带随机激励作用下, 磁斥力双稳态压电俘能系统的相干共振俘能机理, 并进行了实验验证. 运用Euler-Maruyama方法求解了随机非线性压电振动耦合方程, 比较分析了相干共振发生前后系统的动力学特性和俘能效率, 然后基于Kramers逃逸速率解释了相干共振. 最后的随机振动实验结果验证了双稳态压电俘能系统的相干共振俘能机理. 并且观察到: 当相干共振发生时, 系统会在两个势能阱之间剧烈运动, 此时宽带随机振动能量会被转化为大幅值窄带低频振动响应, 从而极大地提高了宽带随机振动能量的俘获效率.     

一种新型Cymbal换能器的研究

提出并研究了一种新型的Cymbal换能器.与传统的Cymbal换能器相比,该换能器中的压电陶瓷圆盘由一个金属圆环和压电陶瓷圆盘的径向组合体所代替.论文首先探讨了压电陶瓷圆盘和金属圆环组合体的径向振动,用解析方法得出了其径向振动的机电等效电路.在此基础上,得出了新型Cymbal换能器的机电等效电路,并得出了其共振及反共振...     

低温下ZnSe－ZnS多量子阱的光致发光光谱和喇曼散射谱

本文报导了２Ｋ下，在ＧａＡｓ（１００）衬底上用ＭＯＣＶＤ方法生长的ＺｎＳｅ－ＺｎＳ多量子阱材料的光致发光光谱和喇曼散射谱．用共振激发、共振喇曼和共振瑞利散射等方法对各发光谱带和喇曼散射峰的来源和机制进行了鉴别．     

用激光共振电离光谱测定铈原子奇宇称高激发态(Ⅰ):32 042～34 575 cm-1

激光共振电离光谱是一种十分适合于高能量区重元素复杂原子结构研究的技术。为寻找原子最佳的共振电离通道，利用这一技术对铈原子奇宇称高激发态进行了研究。在32042－34575cm^-1范围内，用两步共振激发和非共振电离方法，首次观察到了83条铈原子奇宇称高激发态能级，测量了这些新能级的能量和给出了可能的总角动量J值。     

CdSe量子点拉曼谱的共振效应研究

本文介绍了用共振拉曼光谱研究CdSe量子点材料的结果,认为拉曼峰是ZnSe和量子点界面模的叠加。指出当激发光能量逐渐离开ZnSe带隙时,共振减弱,ZnSe峰不再占主导,界面模的拉曼峰出现移动及变宽。     

低温下ZnSe-ZnS多量子阱的光致发光光谱和喇曼散射谱

本文报导了2K下,在GaAs(100)衬底上用MOCVD方法生长的ZnSe-ZnS多量子阱材料的光致发光光谱和喇曼散射谱.用共振激发、共振喇曼和共振瑞利散射等方法对各发光谱带和喇曼散射峰的来源和机制进行了鉴别.     

悬臂梁压电振子宽带低频振动能量俘获的随机共振机理研究

研究了利用系统非线性来提高悬臂梁压电振子宽带低频振动能量俘获效率的随机共振机理,通过增加一对矩形永磁铁对传统线性悬臂梁压电振子结构进行了改进,结果揭示:在外部非线性磁力作用以及合适的磁铁间距条件下,这种外加磁力悬臂梁压电振子会构成一个双稳系统,在外部宽带低频随机振动源激励下发生随机共振现象,且发生随机共振时的输出电压明显增大,从而可以扩展悬臂梁压电振子的共振频率范围、提高低频振动能量的转化输出. 关键词： 压电悬臂粱 振动能量俘获 宽带低频 随机共振     

扭转压电复合材料及其应用

本文描述了轴向－切向连通的圆柱２－２型压电复合材料。用ＰＺＴ／环氧树脂制作的普通２－２型压电复合材料可拼接成一种具有扭转振动的压电复合材料。这种压电复合材料和为圆柱２－２型压电复合材料的近似。本文还给出两组这种拼接型压电材料晶片的参数，用这种压电材料制作了产生扭转振动的换能器，测试了换能器的波形，频谱特性和偏振特性，指出了使用适当的高通滤波器可以抑制横波中的径向模，分析了接收波列中纵波抑制较强的原     

Study on the radial composite piezoelectric ceramic transducer in radial vibration

A new type of radial composite piezoelectric transducer in radial vibration is developed and analyzed. The radial composite transducer consists of a piezoelectric ceramic thin ring polarized in the thickness direction and a metal thin circular ring. They are connected together and excited to vibrate in the radial direction. The radial vibrations of a piezoelectric ceramic thin ring and a metal thin circular ring are analyzed, respectively. Their radial electro-mechanical equivalent circuits are obtained. Based on the electro-mechanical equivalent circuits and using the boundary conditions between the piezoelectric ceramic thin ring and the metal thin circular ring in the radial direction, the electro-mechanical equivalent circuit of the radial composite piezoelectric transducer is derived out and the resonance frequency equation is obtained. The relationship between the resonance frequency and the geometrical dimensions of the transducer is analyzed. Some radial composite piezoelectric transducers are designed and manufactured. The resonance frequencies and the anti-resonance frequencies, the electro-mechanical equivalent circuit parameters are measured. The effective electro-mechanical coupling coefficient and the mechanical quality factor are calculated. It is illustrated that the measured radial resonance frequencies are in good agreement with the theoretical results from the resonance frequency equation.     

Piezoelektrische Messungen an Zinkoxydkristallen

ZnO single crystals are piezoelectric. Ultrasonic resonances were excited in resonators of various shapes. Geometrical dimension and resonance frequency led to the (adiabatic) elastic moduli (exceptc ₄₄). The capacitance ratio was obtained by resonance-antiresonance measurements and the quality factor by means of pulse excitation and the half-width of the resonance curve. The pyroelectric effect in ZnO was demonstrated.     

Resonance frequencies of piezoelectric plates surrounded by solid and fluid half-spaces

The design of ultrasound transducers, resonators and other piezoelectric devices usually requires the calculation of the resonance frequencies of piezoelectric plates. Recent studies have shown that the resonance frequencies for plates in vacuum correspond to frequencies where the waveguide group velocity vanishes (zero-group-velocity points). However, those studies are limited to vacuum boundary conditions. The objective of the present study is to analyze the resonance frequencies of layered piezoelectric plates in contact with solid and fluid half-spaces and their relation to the dispersion behavior of the elastic guided wave propagation. Theoretical analysis using partial-wave approach of leaky Lamb waves is performed to study wave propagation in, and resonance behavior of, multilayered plates in contact with solid and fluid half-spaces. A novel observation resulted from this analysis is that, for plates in contact with solid and fluid half-spaces, the resonance frequencies occur at points where the magnitude of the wavenumber reaches a minimum. This frequency is named as a ‘transition frequency’. Such observations are important because they allow an easy identification of resonance frequencies with high amplitude response directly from the dispersion curves. This study will be helpful for the design of piezoelectric components used for resonators and sensors.     

Study on the prestressed sandwich piezoelectric ceramic ultrasonic transducer of torsional-flexural composite vibrational mode

Based on the classical torsional and flexural vibrational theory of a slender rod, the prestressed sandwich torsional-flexural composite mode piezoelectric ceramic ultrasonic transducer is studied. This type of transducer consists of the slender metal rods and the longitudinally and tangentially polarized piezoelectric ceramic rings. The resonance frequency equations for the torsional and flexural vibrations in the transducers are derived. The simultaneous resonance of the torsional and flexural vibrations in the transducer is acquired by correcting the length of the metal slender rods resulting from the piezoelectric ceramic elements. The experimental results show that the measured resonance frequencies of the transducers are in good agreement with the computed ones, and the measured resonance frequencies of the torsional and the flexural vibrations in the composite transducers are also in good agreement with each other.     

阶梯圆环压电超声换能器径向振动性能的理论研究*

提出了一种阶梯圆环径向振动压电超声换能器,根据力电类比原理建立了阶梯圆环及阶梯圆环换能器的径向振动等效电路,推导了阶梯圆环的径向共振频率方程和位移放大系数,在此基础上进一步推导了换能器的径向共振和反共振频率方程。通过理论推导和有限元仿真模拟分析了阶梯圆环压电超声换能器的径向振动性能。结果表明,增大阶梯圆环中内外环的径向厚度之比K1或减小轴向厚度之比K2,阶梯圆环的一阶径向共振频率减小,二阶径向共振频率增大;在二阶径向共振模式下,K1、K2值在一定范围内阶梯圆环可实现由内向外的径向位移振幅放大;随着压电陶瓷圆环的内半径增大,阶梯圆环压电超声换能器的一阶、二阶径向共振和反共振频率减小,二阶径向共振下的有效机电转换系数趋于零;增大阶梯圆环内环的外半径,换能器的一阶径向共振和反共振频率减小,二阶径向共振和反共振频率先增大后减小,理论推导与仿真模拟结果符合良好。本文研究结果为阶梯圆环压电超声换能器的工程应用提供理论参考。     

Electric impedance and amplitude-frequency response of a one-dimensional ultrasonic liquid-filled resonator with flat piezoelectric plates

The impedance method is used to determine the electric impedance of a resonator. The amplitude-frequency response of a one-dimensional liquid-filled ultrasonic resonator is calculated by directly solving the wave equations and piezoelectric effect equations under the corresponding boundary conditions. An analysis of the amplitude-frequency response shows that the simple analytical expression obtained from the aforementioned solution is in good agreement with experimental data. An anomalous variation of the electric current in the radiating piezoelectric plate versus the excitation frequency is theoretically revealed near the high-Q resonance peaks. This effect is confirmed experimentally. It gives rise to errors in the measured absorption coefficient and multiply broadens the resonance peaks when the measurements are performed near the resonance frequencies of the piezoelectric plates.     

Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators

Based on Timoshenko beam model, a theoretical model of radially polarized piezoelectric ceramic tubes is investigated. In the model, the piezoelectric effects are considered, and the shear correction factor is introduced which reveals effects of the size of the cross-section and Poisson’s ratio. Based on the model, the particular attentions are devoted to effects of the boundary conditions at two ends on flexural resonance frequencies of the piezoelectric ceramic tubes. Changing the sizes of the tubes and the mass loads at both free ends, the variations of the flexural resonance frequencies of free–free piezoelectric ceramic tubes are calculated theoretically. Besides, the flexural resonance frequencies of the piezoelectric ceramic tube cantilevers with mass loads at one free end are also investigated theoretically. To verify accuracy of the theoretical mode, the flexural resonance frequencies for different lengths of the piezoelectric ceramic tubes and different loaded masses are measured experimentally. The theoretical results agree well with the experimental measurement, which demonstrates that the model is accurate for analyzing the flexural resonance frequencies of the piezoelectric ceramic tubes with mass loads.     

Dynamic properties of an omni-directional piezoelectric motor for precision position control

A piezoelectric motor capable of omni-directional movements has been developed to apply for robot joints, eyes, and precision positioning stage. The piezoelectric actuator has a simple structure of a cone type consisting of two piezoelectric ring-typed ceramics with electrodes divided into four segments and stainless steel elastic bodies. Before manufacturing the piezoelectric motor, the admittance characteristics and displacements of the actuator as a function of frequency were simulated. Elliptical motions of the actuator were created at several frequencies between the longitudinal and transverse resonance frequencies. The actual motor with alumina ball exhibited nice performance using a driving circuit with two rotary encoders and a PID controller. The moving element was omni-directionally operated at a driving frequency of 53.8 kHz and an output voltage of 280 V_p-p. The developed motor enables the moving element to move to a desired position with a resolution of 1.2°/pulse, an angular velocity of 4 rad/s, and a thrust force of 200 g.     

铌酸钾钠基无铅压电陶瓷纵振换能器*

高性能环境友好型无铅压电陶瓷及其应用是当前压电材料研究的热点之一,为了探究其在水声换能器领域的应用潜力,该文对铌酸钾钠基无铅压电陶瓷和锆钛酸铅压电陶瓷纵振式换能器进行了对比研究。依据仿真结果优化结构尺寸,制作了两种换能器样机并测试了其在空气中和水中的电声性能。测试结果表明,铌酸钾钠基无铅压电陶瓷换能器的谐振频率为35kHz,最大发送电压响应为 151dB,声源级可达 190dB,在 26kHz~67kHz 的频率范围内发送电压响应的起伏不超过±4.5dB,谐振频率处-3dB 的指向性开角约为 76°。该无铅压电陶瓷换能器具有和锆钛酸铅压电陶瓷换能器相当的发射性能,有望推动无铅压电材料在水声换能器领域的应用进程。     

径向复合圆柱压电超声换能器

提出一种三元径向复合圆柱压电超声换能器,并对其径向振动特性进行了研究。基于弹性力学理论及机电类比原理,导出了柱坐标系中分割处理径向极化压电陶瓷管准厚度模振动及薄壁短圆管径向振动的机电等效电路;利用径向力和振速连续的边界条件,得出了径向复合圆柱压电换能器系统的径向振动机电等效电路及其共振频率方程。探讨了换能器径向共振频率及有效机电耦合系数随其几何尺寸的变化关系。研究表明,换能器的径向共振频率及有效机电耦合系数随其内芯半径和预应力管壁厚度增大而降低。研制了一些径向复合圆柱压电换能器,并对其径向共振频率进行了测试。结果表明,理论与实验结果基本一致。