Canted antiferromagnetic and optical properties of nanostructures of Mn2O3 prepared by hydrothermal synthesis

We have reported new magnetic and optical properties of Mn2O3 nanostructures.The nanostructures have been synthesized by the hydrothermal method combined with the adjustment of pH values in the reaction system.The particular characteristics of the nanostructures have been analyzed by employing X-Ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray(EDX) analysis,transmission electron microscopy(TEM),high resolution transmission electron microscopy(HRTEM),Raman spectroscopy(RS),UV-visible spectroscopy,and the vibrating sample magnetometer(VSM).Structural investigation manifests that the synthesized Mn2O3 nanostructures are orthorhombic crystal.Magnetic investigation indicates that the Mn2O3 nanostructures are antiferromagnetic and the antiferromagnetic transition temperature is at TN=83 K.Furthermore,the Mn2O3 nanostructures possess canted antiferromagnetic order below the Neel temperature due to spin frustration,resulting in hysteresis with large coercivity(1580 Oe) and remnant magnetization(1.52 emu/g).The UV-visible spectrophotometry was used to determine the transmittance behaviour of Mn2O3 nanostructures.A direct optical band gap of 1.2 eV was acquired by using the Davis-Mott model.The UV-visible spectrum indicates that the absorption is prominent in the visible region,and transparency is more than 80% in the UV region.     

Shape-dependent plasmon resonances of Ag nanostructures

Different silver nanostructures have been rapidly synthesized under microwave irradiation from a solution of silver nitrate (AgNO₃) and β$\beta$-D glucose; neither additional reducing nor capping agent were required in this soft green solution approach. Not only spherical nanoparticles, but also necklace and wires have been synthesized. The plasmon resonances of the synthesized silver nanostructures were tuned by varying the irradiation time and hence by changing size and morphology of nanostructures. The obtained nanostructures were characterized by X-Ray diffraction (XRD), Uv–Vis spectroscopy (Uv–Vis), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The change of peak position and the shape of the absorption spectra were clearly observed during the whole reaction process; in fact, it was evidenced that initially Ag nanoparticles were formed, which, as reaction time elapsed, self-assembled and fused with each other to yield nanowires.     

Syntheses of BaCO3 nanostructures by ultrasonic method

BaCO₃ nanostructures were synthesized by the reaction of Ba(CH₃COO)₂ and sodium hydroxide or tetramethylammonium hydroxide (TMAH) by a sonochemical method. Reaction conditions, such as the concentration of the Ba²⁺ ion, aging time and power of the ultrasonic device played important roles in the size, morphology and growth process of the final products. The BaCO₃ nanostructures were characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and the Infrared spectroscopy (IR).     

BaMnO3 nanostructures: Simple ultrasonic fabrication and novel catalytic agent toward oxygen evolution of water splitting reaction

In the current paper, the main aim is to fabricate the BaMnO₃ nanostructures via the sonochemical route. The various factor, including precursors, reaction time and power of sonication can affect the shape, size, and purity of the samples. We utilized X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray energy dispersive spectroscopy (EDS) to characterize the BaMnO₃ nanostructures. The optical property of BaMnO₃ nanostructures was explored by Ultraviolet–visible spectroscopy (UV–vis) and the energy gap was suitable for catalytic activity (about 2.75 eV). Changing the precursor can affect the size, nanoparticle shape, architectures, and uniformity of the samples. We employed the BaMnO₃ nanostructures for O₂ evolution reaction as catalysts. It can observe that increasing the homogeneity of the catalysts can increase the efficiency of the Oxygen evolution reaction. The maximum amount of the O₂ evolution and the highest TOF and TON are related to nanoplate disc using barium salicylate as a precursor of barium. As a result, we can nominate the BaMnO₃ nanostructures as an effective and novel catalyst for water-splitting reaction.     

A novel precursor for synthesis of metallic copper nanocrystals by thermal decomposition approach

[Bis(2-hydroxy-1-naphthaldehydato)copper(II)] complex, as a novel precursor, was employed in thermal decomposition process to synthesize metallic copper nanoparticles using oleylamine (C₁₈H₃₇N) as capping agent. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible (UV-vis) spectroscopy. The synthesized copper nanoparticles have a fcc structure with average size 20-35 nm.     

Green synthesis of ZnO nanoparticles in a room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

Nanoparticles of ZnO with the wurtzite structure have been successfully synthesized via a microwave through the decomposition of zinc acetate dihydrate in an ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, as a solvent. Fundamental characterizations including X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were conducted for the ZnO nanostructures.To explore the growth mechanism, the samples have been prepared in different irradiation time and also cetyltrimethylammonium bromide (CTAB) has been used as the capping reagent.     

Tin-doped indium oxide nanobelts grown by carbothermal reduction method

This communication discusses the formation of doped nanobelts produced by a simple route. Tin-doped indium oxide (ITO) nanobelts were obtained by a carbothermal reduction method. The nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX) and wavelength-dispersive X-ray spectroscopy (WDX). The results show that the nanobelts have a cubic structure, are single crystalline and doped with tin and grow in the [400] direction. PACS 81.07.-b; 61.46.+w; 68.37.Hk; 68.37.Lp     

Fabrication of chain-like Mn2O3 nanostructures via thermal decomposition of manganese phthalate coordination polymers

A novel manganese coordination polymer [Mn(Pht)(H₂O)]_n as a precursor was obtained by chemical precipitation involving an aqueous solution of anhydrous manganese acetate and phthalate anion as a potential O-banded ligand. Fourier transform infrared (FT-IR) results proved that phthalate anions coordinate to metal cations as a chelating bidentate ligand, making polymeric structure. The Mn₂O₃ nanostructures have been prepared via thermal decomposition of as-prepared manganese phthalate polymers as precursor in the presence of oleic acid (OA) and triphenylphosphine (TPP) as a stabilizer and capping. Different approaches such as FT-IR, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were applied to characterize the products. TEM images and XRD analysis indicated that the as-synthesized chain-like Mn₂O₃ has a crystal phase of cubic syngony with a mean size of ∼40 nm.     

Copper sulfide nanotubes: facile, large-scale synthesis, and application in photodegradation

Large-scale synthesis of copper sulfide (CuS) nanotubes with uniform size could be achieved via a facile hydrothermal method. The whole process could be adjusted to prepare CuS with different nanostructures by simply changing the concentration of NaOH or reaction temperature while keeping other conditions unchanged. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Photoluminescence (PL) spectroscopy were used to characterize the products. The as-prepared CuS nanotubes showed good photocatalytic activity of degrading eosin Y under UV-vis light irradiation, which indicated the potential application of the CuS nanotubes in eliminating pollution and environmental protection.     

Synthesis and characterization of the SnS nanowires via chemical vapor deposition

Single-crystal SnS nanowires have been successfully synthesized by catalysis-assistant chemical vapor deposition. Applying Au nanoparticles which were applied on the ITO surface as the catalysator, using SnS powder and S powder as precursors and the Ar+H₂ mixed atmosphere as the shielding and carrier gas, the SnS nanowires were obtained. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS) and Raman spectroscopy were employed to characterize the as-synthesized SnS nanostructures. The room-temperature photoluminescence properties of these as-prepared SnS nanowires were presented.     

Template-free solvothermal synthesis of 3D hierarchical nanostructured boehmite assembled by nanosheets

In the absence of template and surfactant, hierarchical nanostructured boehmite was synthesized via a simple solvothermal route using aluminum nitrate as aluminum source and isopropanol–toluene mixture as solvent. The crystal structures, morphologies and textural properties of products were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and N₂ adsorption–desorption technique. The as-obtained hierarchical nanostructures consist of nanosheets keeping Brunauer–Emmett–Teller (BET) specific surface area and pore volume of ca. 264.7 m²/g and 1.2 cm³/g, respectively. The experimental results show that the longer reaction time and the lower reaction temperature are unfavorable to the formation of hierarchical nanostructures. Moreover, the properties of solvent have important influence on the morphology of product. The possible formation mechanism of boehmite hierarchical nanostructures was proposed and discussed.     

Sonochemical synthesis and characterization of NiMoO4 nanorods

NiMoO₄ nanorods have been successfully synthesized by sonochemical method process by using Ni(CH₃COO)₂·4H₂O and (NH₄)₆Mo₇O₂₄·4H₂O as starting materials. Some parameters including ultrasonic power, ultrasonic irradiation time, stirring effect, solvent effect, and surfactant effect were investigated to reach optimum condition. The as synthesized nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM), photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectra and energy dispersive X-ray microanalysis (EDX). Facile preparation and separation are important features of this route. This work has provided a general, simple, and effective method to control the composition and morphology of NiMoO₄ in aqueous solution, which will be important for inorganic synthesis methodology.     

Microwave-assisted synthesis of flower-like and leaf-like CuO nanostructures via room-temperature ionic liquids

Flower-like and leaf-like cupric oxide (CuO) single-crystal nanostructures have been successfully synthesized using ionic liquid 1-octyl-3-methylimidazolium trifluoroacetate ([Omim]TA) under the microwave-assisted approach. By controlling the concentration of [Omim]TA and reaction temperature, shape transformation of CuO nanostructures could be achieved in a short period of time. The results indicate that ionic liquid [Omim]TA plays an important role in the formation of different morphologies of CuO crystals. The crystal structure and morphology of products were characterized by X-ray powder diffraction (XRD), infrared spectrum (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and selected-area electron diffraction (SAED). A possible mechanism for CuO nanostructure was proposed. In addition, UV-vis spectroscopy was employed to estimate the band gap energies of CuO crystals.     

Preparation of large-area surface-enhanced Raman scattering active Ag and Ag/Au nanocomposite films

Ag films on tinning glass substrates were fabricated by modified silver-mirror (Tollen’s) reaction with the advantage of low-cost, simple and quick fabrication process. The obtained Ag films were served as sacrificial materials for preparation of Ag/Au nanocomposite films by immersing in a chlorauric acid (HAuCl₄) solution at room temperature. After a short time of galvanic replacement reaction, Ag/Au bimetallic nanostructures were synthesized with “concave” structures. The morphology, properties and composition of the Ag and Ag/Au nanocomposite films were analyzed by using scanning electron microscopy (SEM), UV-visible spectroscopy, X-ray diffraction (XRD), energy-dispersive X-ray spectrometry (EDS) and surface enhanced Raman scattering (SERS). SEM images displayed that the large area of Ag film and Ag/Au bimetallic nanostructures experienced structural evolution process during galvanic reaction. The UV-Vis spectra showed the absorbencies characterization of Ag film and Ag/Au nanocomposite films. SERS measurements using methylene blue as an analyte showed that SERS intensities of bimetallic films were enhanced significantly compared with that of pure Ag films. The SERS enhancement ability of Ag/Au bimetallic films was dependent on the immersion time for galvanic replacement reaction.     

ZnO-ionic liquid nanostructures

The mixture of nanostructures derived from the surface interactions and reactivity of ZnO nanoparticles with the room-temperature ionic liquid (IL1) 1-hexyl, 3-methylimidazolium hexafluorophosphate has been studied. Results are discussed on the basis of transmission electron microscopy (TEM) observations, energy dispersive spectroscopy (EDS) analysis, X-ray diffraction (XRD) patterns and X-ray photoelectron spectroscopy (XPS) determinations. Size and morphology changes in ZnO nanoparticles by surface modification with IL1 are observed. ZnF₂ crystalline needles due to reaction with the hexafluorophosphate anion are also formed.     

Ultrasound-assisted synthesis of NiFe- layered double hydroxides as efficient electrode materials in supercapacitors

Under ultrasound irradiation, NiFe-layered double hydroxide (NiFe-LDH) nanostructures with three molar ratios and three dissimilar reaction times were prepared. The powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared spectroscopy (FT-IR) were employed to characterize the synthesized nanomaterials. Using a sonochemichal route, various morphologies of the NiFe-LDH nanostructures without any impurity and variations in the structure were produced. During the optimization process, it was found that sonication time and reagent concentration in a fixed irradiation frequency can affect the size and the morphology of the produced nanostructures. Under ultrasound irradiation, non-aggregated particles with uniform, spherical morphology were obtained with molar ratios of 4:1 (Ni:Fe) with 45 W at 180 min. The NiFe-LDH samples were observed to be supercapacitor under a 6 M KOH solution. When morphologically-controlled NiFe-LDH samples were used, the pseudo-capacitive behavior of the nanostructures was tuned. After 3 h of ultrasonic irradiation, the optimized sample (NiFe-LDH spherical nanostructures with 4:1 M ratio) had a high value of specific capacitance (168F g⁻¹).     

Synthesis, characterization and mechanism of cetyltrimethylammonium bromide bilayer-encapsulated gold nanosheets and nanocrystals

Single-crystal Au nanosheets and fcc gold nanocrystals of uniform size were synthesized by a novel and simple route. The results of field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) indicated the formation of the single-crystal structure of gold nanosheets and fcc nanocrystals. Energy-dispersive analysis of X-ray (EDAX) showed absorbance of cetyltrimethylammonium bromide (CTAB) molecules onto the surface of gold nanostructures. Moreover, zeta potential measurements showed that CTAB-coated nanostructures were positively charged and the zeta potential remained almost the same upon centrifugation and redispersion of the resulting nanostructures in methanol, confirming the high stability of the surfactant-protected nanocomposites. Evolution of the nanostructures during the reaction was monitored by TEM observations. The results indicated that the formation of the gold nanostructures followed a two-step mechanism with a bilayer CTAB structure on the surface of the gold nanostructures.     

Evolution of ZnO nanostructures in sol–gel synthesis

Evolution of the microstructure and optical properties of ZnO nanoparticles in a mild sol–gel synthesis process is studied. The ZnO nanostructures were prepared by reacting zinc acetate dihydrate with NaOH in water at 50−60 °C. Evolution of ZnO nanostructures with reaction time is studied using UV–Vis spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy techniques. During the process of Zn²⁺ hydroxylation, well defined rod-like crystals were formed within 15 min. Further hydroxylation leads to the formation of a gel-like structure within about 45 min. However, XRD, FT-IR and energy dispersive spectroscopy (EDS) confirmed that these initial products were zinc hydroxyl double salts (Zn-HDS), not ZnO. On ageing the reaction mixture, ZnO nanoparticles with wurtzite structure evolved.     

Structural and optical properties of poly-vinylpyrrolidone modified ZnO nanorods synthesized through simple hydrothermal process

The synthesis of nanocrystalline zinc oxide (ZnO) in the presence of poly-vinylpyrrolidone (PVP) as capping agent through hydrothermal process, and their structural and optical properties were reported. PVP modified ZnO nanorods grown hydrothermally involve a heterogeneous chemical reaction in the presence of water as a solvent medium and reaction temperature of 100 °C for 7 h in a hot air oven and calcined in air at 500 °C for 3 h. Crystal structure, phase purity and average crystallite size of ZnO were studied by powder X-ray diffraction (PXRD). The strain associated with the as-prepared samples due to lattice deformation was estimated by Williamson–Hall (W–H) analysis. Structural morphology was investigated using scanning electron microscopy (SEM), which showed the formation of nanorods with PVP capping. The growth mechanism of ZnO nanorods and its capping by poly-vinylpyrrolidone are briefly discussed through FT-IR adsorption spectra. The optical behavior of the samples was analyzed through photoluminescence (PL) spectroscopy with an emission spectra in visible region ∼418 nm indicate the applicability of using it as a transport material in solar cells.     

Synthesis and photochromic properties of 1,3-diaminopropane-induced MoO3 powder

In the present work, molybdenum trioxide (MoO₃) powder with novel morphology and good photochromic properties was successfully synthesized via a facile chemical method. The capping agent 1,3-diaminopropane (DAP) was found to be vital in the formation of the morphology, as well as the good photochromism of MoO₃. The as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission electron microscopy (TEM), N₂ adsorption-desorption analysis (BET) and ultraviolet and visible spectroscopy (UV-vis).