首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 93 毫秒
1.
海水中可溶性的营养盐浓度是海洋监测的常规项目之一;大洋水体中的营养盐含量很低,使用传统的分光光度计难于定量测量。文章基于液芯波导长光程技术,设计了高灵敏度的痕量海水营养盐光谱分析仪。分析仪以1.02 nm的光谱分辨率实现350~900 nm光谱范围的水样吸光度连续光谱测量,并由嵌入式PC104微机自动实现了水样采集、吸光度测量和数据分析的功能。针对亚硝酸盐的测试实验结果表明,仪器检出限达到nmol.L-1的量级,比传统分光光度计的检测限提高了三个量级,且显色反应时间可缩短到3 min,能适用于大洋水体中营养盐的现场痕量分析。  相似文献   

2.
通常测色分光光度计均由两个独立且完全相同的分光系统组成,为实现测色分光光度计小型化、轻量化,提出一种双光束分光系统设计。将传统的分光系统进行改进,使一个分光系统实现双光束分光系统的功能,用两个小狭缝代替一个狭缝,即可实现两束光谱同时探测。分析了双光束分光系统的工作原理及设计要求,设计了一个用于便携式测色分光光度计的分光系统。设计的Czerny-Turner结构双光束分光系统采用超环面成像镜,可以较好的校正像散,防止两束光谱串扰,两束光谱在探测器上完全没有重叠,光谱分辨率小于10nm,谱面长度9.12mm,体积仅为57mm×54mm×23mm,满足设计指标要求。通过与相同设计指标的单光束分光系统比较得出,采用双光束分光系统的改进型测色分光光度计比传统的测色分光光度计减少了一整套分光系统,从而使体积大幅缩小。该方法特别适用于便携式测色分光光度计,也可适用于其他双光束分光光度计。  相似文献   

3.
多晶硅表面酸腐蚀制备绒面研究   总被引:6,自引:5,他引:1  
张发云  叶建雄 《光子学报》2011,40(2):222-226
采用各向同性腐蚀法制备多晶硅绒面,腐蚀液为HF和HNO2的混合溶液,缓和剂为NaH2PO.2H2O溶液.利用SEM、AFM和紫外分光光度计对硅片绒面进行检测和分析,初步探讨了酸腐蚀机理.结果表明:采用NaH2PO4.2H2O溶液作为缓和剂,腐蚀后的硅片表面具有均匀的腐蚀坑,表面陷光效果较好,通过优化各种参量,反应速度可...  相似文献   

4.
便携式紫外-可见分光光度计的设计   总被引:8,自引:1,他引:7  
介绍了一种便携式紫外-可见分光光度计的设计方法, 该方法采用平场凹面全息光栅及Hamamatsu图像传感器S3904-1024Q为核心设计了小型化的色散系统;将多股光纤的一端排列成长方形直接作为入射狭缝, 解决了光谱带宽与光源能量利用率之间矛盾的问题;采用触摸屏作为仪器的输入与输出设备及集成化的小型光纤光源作为仪器的光源. 实验结果表明, 采用该种方法设计的紫外-可见分光光度计体积小(190 mm×170 mm×100 mm)、操作简单(触摸屏操作)、可以多波长同时在线测量、技术指标符合国家标准.  相似文献   

5.
近红外光谱分析已广泛应用于工业、农业等领域,然而其测量精度极易收到外界干扰因素的影响,其中温度变化最不易控制,且是一个不可忽视的影响因素.文章基于溶液中溶质与溶剂的置换效应,提出了一种对样品进行温度测量的基准波长法,并以葡萄糖水溶液作为研究对象,对该方法进行了理论推导和实验研究.溶液中溶质浓度和温度均发生变化时,基准波长1 525 nm处的吸光度变化量完全受温度变化的影响,而与溶质浓度无关,因此根据基准波长点处的吸光度变化可以获得样品温度信息.计算不同温度下纯水光谱与30℃下纯水光谱之间的吸光度变化量,获得基准波长点处吸光度变化值与温度的一元线性回归模型,以此为基础对溶液进行了温度计算.实验结果表明,该方法能对样品的温度进行准确测量,获得的温度误差为0.03℃.  相似文献   

6.
所采用的变温光谱差减方法是将待测试样分成两份 ,一份作为参比试样 ,恒定在某一温度 (参比温度 )下 ,另一份作为待测样品 ,选定另一待观测温度 ,在一定的波长范围内 ,用岛津UV 2 4 0型紫外 可见双光束分光光度计扫描 ,获得紫外吸收温差光谱 (UVSDT)。选择不同的温度差 ,测得温差光谱随温差的变化。观测了C60 分子在乙醇、环己烷、正己烷、异丙醇等几种有机溶剂中吸光度随温度的变化。观测结果发现C60 溶液的吸光度变化存在显著的负温度效应。C60 的UV吸收光谱峰随试样温度升高而降低 ,UV吸收温差光谱 (U VSDT)为负峰 ,UVSDT峰强随温差增大而负向增大。说明C60 的结构对温度有较强的依赖关系。这种依赖关系与π π 电子跃迁类型密切相关。实时现场测量C60 溶液的吸光度随温度变化规律 ,对分离、纯化、分析富勒烯 ,认识C60 特性、研究以溶剂为媒介的化学反应机理 ,以及提高测量的准确度和重现性等 ,均有一定的理论意义和实用价值  相似文献   

7.
通过Friedel-Crafts烷基化反应合成了一种含三氰基二氢呋喃结构单元的新型非线性光学聚合物(P1),并采用旋涂法和电晕极化方式制备了极化聚合物膜.利用原子力显微镜和紫外可见分光光度计研究了极化前、后聚合物膜的表面形貌和吸光度的变化,并根据极化前后薄膜吸光度的变化计算了发色团分子的有序度,φ=0.20.采用二次谐...  相似文献   

8.
为了快速、准确估测番茄叶片叶绿素含量,利用光谱分析技术研究了玻璃温室环境下番茄叶绿素含量敏感光谱波段提取及其估测模型。番茄以基质方式栽培,在结果期使用ASD FieldSpecTM HH型便携式光谱辐射仪采集叶片光谱,并采用752型紫外-可见分光光度计测定其叶绿素含量。从原始光谱、吸光度光谱、一阶微分光谱、去除包络线光谱出发,进行光谱预处理,分析了净化图谱信息、突出作物叶绿素含量光谱特征的有效性。其中,吸光度光谱在可见光部分增强了光谱响应特征,去除包络线光谱和一阶微分光谱均具有较强的蓝光、红光吸收谷和绿光反射峰。又结合波段间自相关分析和多重共线性诊断提取了番茄叶绿素含量敏感光谱波段,原始光谱特征波段为639,672,696,750,768nm;吸光度光谱特征波段为638,663,750,763nm;去包络线光谱特征波段为436,564,591,612,635,683,760nm;一阶微分光谱特征波段为516,559,778nm。最后,应用4种预处理下的番茄叶绿素含量敏感光谱波段分别建立多元线性回归模型,模型精度由高至低分别为去包络线、吸光度、原始、一阶微分,其中去包络线模型校正集决定系数R2c为0.88,验证集决定系数R2v达到0.82,具有较好的预测能力。  相似文献   

9.
中性红分光光度法测定肝素钠的研究   总被引:6,自引:1,他引:5  
在pH 3.0的Britton-Robinson(B-R)缓冲溶液中,中性红与肝素钠相互作用形成复合物而导致溶液吸收光谱发生变化,用分光光度法对光谱变化进行了研究.中性红溶液在523 nm处有一个强的特征吸收峰,当在其溶液中加入肝素钠后,溶液发生褪色现象,吸收峰强度降低,且没有新的吸收峰出现,吸光度差值(△A)与肝素钠的浓度成正比.对结合反应的条件进行了优化,在最佳条件下利用溶液吸光度值的降低与肝素钠浓度的关系建立了一种测定肝素钠浓度的新方法,测定的线性范围为0.10~15.0 mg·L-1,表观摩尔吸光系数ε=2.037×106L·mol-1·cm-1,检测限(3σ)为0.073 mg·L-1.将该方法应用于肝素钠注射液效价的测定,结果令人满意.用摩尔比法对复合物的结合比进行了推算,两者形成1:3的复合物.  相似文献   

10.
本文采用浓硝酸氧化法来改性多壁碳纳米管,用Raman光谱、SEM和分光光度计对改性前后的多壁碳纳米管对4-硝基苯酚溶液的吸附能力进行了比较研究。Raman光谱和SEM分析表明浓硝酸处理使碳纳米管端口打开,管变短,并且在表面引入了羟基、羧基等酸性官能团。采用分光光度计测定溶液浓度,计算出浓硝酸处理前后多壁碳纳米管对不同浓度4-硝基苯酚的吸附效率,实验结果表明经浓硝酸处理后的多壁碳纳米管的吸附效率有较大的提高。  相似文献   

11.
用阳极氧化的方法制备了阳极氧化铝膜,向其孔中镀入了铜,制备了镶嵌铜多孔铝膜。为了研究狭缝宽度与取样间隔对其透射光谱的影响,利用岛津UV-3101型分光光度计,测得了相同取样间隔不同狭缝宽度和相同狭缝宽度不同取样间隔情况下镶嵌铜多孔铝膜的透射光谱,并分析了狭缝宽度和取样间隔对透射曲线的影响,得到了测试镶嵌铜多孔铝膜所需合适的狭缝宽度和取样间隔。测试结果表明:对镶嵌铜多孔铝膜而言,在可见光波段选择3nm的狭缝宽度和0.5nm或1nm的取样间隔为宜;在近红外波段选择5nm或8nm的狭缝宽度和2 nm的取样间隔为宜。  相似文献   

12.
A waveguide with a circular transverse profile can be obtained by using a slit beam shaping method. Applications about optical circuit chips in glass require a circular cross-section waveguide in two dimensions. Here we reported to realize a fabrication of circular cross-section waveguide in two dimensions by rotating the slit corresponding to the tangent line of the arc of the waveguide. The dependence of cross-section on width of the slit was investigated in experiment. The difference of slit width between geometrical optics prediction and experimental result was explained by considering the focal shift in xy directions due to diffraction effects.  相似文献   

13.
针对微型紫外光谱仪设计要求,基于凹面光栅理论与方法开展了微小型紫外光谱仪的像差分析,完成平场化凹面光栅的模拟分析与设计,解决了紫外宽光谱与高分辨率问题,同时应用光栅衍射理论、全息光学理论,采用光栅设计软件PCGrate对凹面光栅的衍射效率进行了设计和优化,使所应用级次的光谱衍射效率在整个设计波段内达到最优,实现了微小型紫外光谱仪的平场凹面光栅设计。所设计紫外凹面光栅工作波长范围190~410nm、口径20mm,F/#=0.21。按照设计参数装调的微型紫外光谱仪在宽度为50μm缝光源再现情况下,光谱分辨率优于3nm,衍射效率无异常出现。  相似文献   

14.
Spatiotemporal shaping of terahertz pulses   总被引:1,自引:0,他引:1  
We report temporal shaping of few-cycle terahertz pulses, using a slit in a conductive screen as a high-pass filter. The filter's cutoff frequency was tuned by changing the width of the slit; the slope of the cutoff transition was altered by changing the thickness of the screen. We measured the transmission function of the filters, using large-aperture photoconducting antennas to create and detect the incident and transmitted electric field. Our experimental results were in excellent agreement with the performed finite-difference time-domain simulations of the propagation of the pulse through the slit. When the screen thickness was greater than the slit width, the filter was well modeled by a short, planar waveguide. Using a simple transfer function, we accurately describe the sharp cutoff and dispersion of such a filter.  相似文献   

15.
Yanhua Wang  Yuegang Chen  Yan Zhang  Shutian Liu 《Optik》2009,120(18):1016-1020
The light transmittance of a periodic metallic grating with varied slit widths has been investigated. The transmission peaks move to the shorter wavelength direction with an increase in the width of slits while keeping the other parameters unchanged. It was demonstrated that the slit width affects the spectral transmittance of the metal grating significantly. It was also found that the effective refractive index and cavity modes in slits are responsible for this phenomenon. Cavity modes play an important role in extraordinary transmission of the sub-wavelength aperture grating. When a complete resonant mode forms in the slits, a high transmission will appear. A wider slit results in a smaller efficient refractive index and thus affects the cavity mode in the slits. These two elements cause the transmission peaks to move to the shorter wavelength direction with widening of slits. The results obtained here may provide a useful guide to design metallic slit grating devices.  相似文献   

16.
康秀英  徐妙华 《大学物理》2003,22(12):30-32
从理论上分析了入射、出射狭缝大小对出射光的光谱宽度和透过率曲线的影响,得到了入射、出射狭缝大小的最佳匹配条件,并通过实验验证了这一结论,分析了鼓轮每次转动格数对测得的透过率曲线的影响,给出了鼓轮每次转动的最佳格数值.  相似文献   

17.
A method based on the combination of finite-difference time-domain (FDTD) algorithm and Fourier transformation was proposed to analyze the Fraunhofer diffraction of gratings. Polarization dependence of the Fraunhofer diffraction of a one-dimensional metallic grating with period less than 8 times the incident wavelength was studied. Some special characteristics were found. The polarization dependence is related to period value, slit width, and thickness of the grating, and the missing orders predicted by scalar analysis appear. Besides, if the period of a grating is larger than 8 times the wavelength but the slit width or the size of the opaque portion of the grating is close to the wavelength, diffraction of the grating also becomes polarization dependent.  相似文献   

18.
光栅光谱仪分辨率及波长范围计算公式的研究   总被引:1,自引:0,他引:1  
对水平对称式Ebert-Fastie型光谱仪的参量及性能进行了分析研究.基于水平对称式Ebert-Fastie型光谱仪工作时的光路图,用几何方法推导出了入射光线与衍射光线的夹角、入射角、衍射角、可测光谱级次及波长适用范围的计算公式,该公式可通过简单编程计算结果.基于理论分辨率计算公式,并考虑到狭缝宽度导致实际分辨率低于理论分辨率,推导出了分辨率与狭缝宽度等结构参量之间关系的计算公式,对该公式求导得出提高分辨率的方法,并举例计算得出考虑狭缝宽度后的实际分辨率为理论分辨率的83%.  相似文献   

19.
Computer simulations and density functional theory results are reported for a Lennard-Jones liquid in a slit or pore formed by two parallel hard walls. Both density profiles and solvation forces are computed. Two classes of calculation are performed. In the first class, a high bulk density is selected and, starting from a high temperature, the temperature is reduced until the temperature corresponding to bulk liquid—vapour coexistence is reached. For small slit widths or exceedingly large widths, the density in the slit decreases continuously until the slit is virtually empty or ‘dry’. When the slit width is somewhat larger than a molecular diameter, but still finite, the density in the slit decreases continuously as the temperature is decreased until there is an abrupt change in the density in the slit. Below this temperature, the density is smaller. Further decreases in the temperature, result in a continuous decrease in the slit density until the slit is virtually empty. In the second class, the density and temperature for bulk coexistence are chosen and the bulk density is increased. At the temperature and bulk density for bulk coexistence, the slit is virtually empty and remains so for all widths that we consider. As the bulk density is increased at constant temperature, the slit remains empty as the width is increased until some specific width is reached and then starts to fill abruptly. The agreement of the density functional and simulation results is qualitative but good.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号