Preparation of CaWO4:Ln@SiO2 (Ln=Tb, Dy and Ho) nanoparticles by a combustion reaction and their optical properties

The CaWO₄:Ln³⁺@SiO₂ (Ln=Tb, Dy and Ho) nanoparticles were synthesized via a combustion process at 800 °C, using citric acid as chelating agent and fuel, ammonium nitrate as fuel, boric acid as flux material and silica as supports. The persistent phosphor nanoparticles were characterized by X-ray diffraction (XRD), reflectance UV-vis and fluorescence spectroscopy (PL) and transmission electron microscopy (TEM) techniques. XRD patterns indicated that crystalline calcium tungstate with scheelite structure was produced. The reflectance UV-vis spectra showed the broad absorption band of groups and the PL spectra showed the wide excitation band, broad emission band of and characteristic emissions of Ln³⁺ ions. The average particle sizes were determined by TEM, which are about 50 nm.     

Structural, elastic, electronic and magnetic properties of ThCr2Si2 from first-principles calculations

The tetragonal (s.g. I4/mmm; #139) ThCr₂Si₂ is widely known as a structural type of the broad family of the so-called 122-like ternary phases which includes now more than 800 members. Among them the superconducting iron-pnictides (discovered in 2008, -earth metals) and the newest superconducting iron-chalcogenides (discovered in 2010, metals) have attracted recently enormous interest in this class of materials. Meanwhile, the data about the electronic, magnetic, and elastic properties of the ThCr₂Si₂ phase itself are still practically absent. Here, by means of first-principles calculations, the optimized structural parameters, spin ordering of the magnetic ground state, independent elastic constants, bulk, shear, and Young’s moduli, elastic anisotropy indexes, total and partial densities of states, and inter-atomic bonding picture for ThCr₂Si₂ were obtained for the first time and analyzed in comparison with the aforementioned most popular 122-like systems and .     

NMR Imaging Using Second Order Quadrupole Broadened Resonances

Theoretical and experimental results for NMR imaging measurements of powdered materials using the + to − transition of -integerspin nuclei in the presence of a very large second-order electric quadrupolar broadening are presented. An “effective spin-” formalism is developed to account for additional effects due to the presence of quadrupolar interactions comparable in size to the Zeeman interaction. A large (7.9 mT/cm-A, with a maximum current of ≈20 A), rapid (≈30 μs) pulsed linear gradient field is used with echoes and phase encoding techniques to obtain images in the limit γH₁is much narrower than the NMR linewidth. A one-dimensional projection of the second-order quadrupolar perturbed, 4-MHz-wide, + ↔ − transition for⁶³Cu in Cu₂O powder is presented as an example. An experimental one-dimensional projection of a sample containing Cu₂O and YBa₂Cu₃O_6.7is also presented.     

Nonlinear Bogolyubov-Valatin transformations: Two modes

Extending our earlier study of nonlinear Bogolyubov-Valatin transformations (canonical transformations for fermions) for one fermionic mode, in the present paper, we perform a thorough study of general (nonlinear) canonical transformations for two fermionic modes. We find that the Bogolyubov-Valatin group for n=2 fermionic modes, which can be implemented by means of unitary transformations, is isomorphic to SO(6;R)/Z₂. The investigation touches on a number of subjects. As a novelty from a mathematical point of view, we study the structure of nonlinear basis transformations in a Clifford algebra [specifically, in the Clifford algebra C(0,4)] entailing (supersymmetric) transformations among multivectors of different grades. A prominent algebraic role in this context is being played by biparavectors (linear combinations of products of Dirac matrices, quadriquaternions, sedenions) and spin bivectors (antisymmetric complex matrices). The studied biparavectors are equivalent to Eddington’s E-numbers and can be understood in terms of the tensor product of two commuting copies of the division algebra of quaternions H. From a physical point of view, we present a method to diagonalize any arbitrary two-fermion Hamiltonians. Relying on Jordan-Wigner transformations for two-spin- and single-spin- systems, we also study nonlinear spin transformations and the related problem of diagonalizing arbitrary two-spin- and single-spin- Hamiltonians. Finally, from a calculational point of view, we pay due attention to explicit parametrizations of and SO(6;R) matrices (of respective sizes 4×4 and 6×6) and their mutual relation.     

Thermoluminescence spectroscopy of Eu and Mn doped BaMgAl10O17

Thermoluminescence (TL) studies of Eu²⁺ and Mn²⁺ doped BaMgAl₁₀O₁₇ (BAM) are reported and discussed. The TL spectra that are measured after irradiation with ultraviolet (120-) show a series of TL peaks between 100 and . The TL spectra are similar for BAM with the two dopants, which suggest that the shallow traps are typical for the BAM host lattice. Using the Hoogstraaten analysis trap depths between 0.1 and are determined. A model is proposed based on thermally activated recombination in local TL centres (not via the conduction band). Further support for this model is obtained from the observation that the TL signal is strongest for excitation around the band edge of BAM . Upon heating the samples in air all low temperature TL peaks decrease in intensity. In addition a new peak appears in the TL spectrum, which is connected with a deeper trap and also a partial oxidation of Eu²⁺ to Eu³⁺ is observed. The luminescence efficiency is lower and the UV induced degradation is faster after annealing in air. These results indicate that the shallow traps are related to oxygen vacancies. The shallow traps do not have a negative influence on performance (efficiency and degradation) of BAM as a lighting phosphor. The luminescence efficiency and stability are strongly influenced by the formation of Eu³⁺ and a deeper trap during annealing in air. Subsequent annealing in a reducing atmosphere restores the original properties.     

Shape-dependent local internal stress of α-Cr2O3 nanocrystal fabricated by pulsed laser ablation

The α-Cr₂O₃ single-crystal nanocondensates were fabricated by pulsed laser ablation in air and characterized by analytical electron microscopy regarding shape-dependent local internal stress of the anisotropic crystal. The nanocondensates formed predominantly as rhombohedra with well-developed surfaces and occasionally hexagonal plate with thin edges and blunt corners. Such nanocondensates showed Raman shift for the CrO₆ polyhedra, indicating a local compressive stress up to ca. 4 GPa on the average. Careful analysis of the lattice fringes revealed a local compressive stress (0.5% strain) at the thin edge of the hexagonal plates and a local tensile stress (0.3–1.0% strain) near the relaxed , , and (0 0 0 1) surfaces of truncated rhombohedra. The combined effects of nanosize, capillarity force at sharp edge, and specific surface relaxation account for the retention of a local internal compressive stress built up in an anisotropic crystal during a very rapid heating–cooling process.     

Vortex penetration depth of κ-(ET)2Cu[N(CN)2]Br

The magnetic field dependence of the in-plane penetration depth λ_|(H) for single crystal κ-(ET)₂Cu[N(CN)₂]Br has been measured at 3, 9.6, and 36 MHz. Over a limited range, λ_| scales with a characteristic field that coincides with a shoulder in the λ_| vs. H curves. Above that field, λ_| increases sharply toward a second inflection point at that coincides with is close to the irreversibility line measured by magnetization. For fields larger than the penetration depth diverges, suggesting that the vortex lattice has melted. The field dependence at one frequency agrees qualitatively with a model of pinned vortices at low fields giving way to flux flow at higher fields. However, the observed frequency dependence deviates significantly from the predictions of this model, suggesting that collective effects play a major role. Our technique also yields a new measurement for the interplane penetration depth λ_⊥ ∼ 300 μm, implying an anisotropy .     

Vibronic spectra, ab initio calculations, and structures of conformationally non-rigid molecules of oxalyl halides in the ground and lowest excited electronic states. Part IV: Analysis of the absorption spectra of oxalyl fluoride in the gas phase

The gas phase absorption spectrum of oxalyl fluoride in the region of 37 000–29 300 cm⁻¹ has been examined at high resolution. Singlet–singlet and singlet–triplet electronic transitions of the trans-conformer were found in the spectrum. The fundamental frequencies of trans-oxalyl fluoride in the and electronic states were determined.In the low resolution ultraviolet absorption spectrum of oxalyl fluoride in the gas phase the transition of the cis-conformer (ν_max) was found to be shifted to the blue by about 6000 cm⁻¹ relative to the transition of the trans-conformer.     

Ac magnetotransport in La0.7Sr0.3Mn0.95Fe0.05O3 at low dc magnetic fields

We report the ac electrical response of La_0.7Sr_0.3Mn_1−xFe_xO₃(x=0.05) as a function of temperature, magnetic field (H) and frequency of radio frequency (rf) current (). The ac impedance (Z) was measured while rf current directly passes through the sample as well as in a coil surrounding the sample. It is found that with increasing frequency of the rf current, Z(T) shows an abrupt increase accompanied by a peak at the ferromagnetic Curie temperature. The peak decreases in magnitude and shifts down with increasing value of H. We find a magnetoimpedance of for at around room temperature when the rf current flows directly through the sample and when the rf current flows through a coil surrounding the sample. It is suggested that the magnetoimpedance observed is a consequence of suppression of transverse permeability which enhances skin depth for current flow. Our results indicate that the magnetic field control of high frequency impedance of manganites is more useful than direct current magnetoresistance for low-field applications.     

Thermal and magnetothermal properties of La0.5Pr0.5Mn2Si2

The thermal and magnetothermal properties of La_0.5Pr_0.5Mn₂Si₂ and isostructural LaFe₂Si₂ intermetallic compounds in the temperature range 4.5-303 K are reported with and without applied magnetic field. The electronic, lattice, and magnetic contributions to the heat capacity of La_0.5Pr_0.5Mn₂Si₂ are determined and analyzed. We have determined and from heat capacity experiments; the values are in line with those from the magnetization measurements. We conclude that in order to observe the anomaly in the heat capacity data around in the system, the transition around should occur in a narrow temperature interval.     

Thermal annealing effects on the magnetic behavior of Ce2NiSi3

We have investigated the crystallographic, magnetic and thermodynamic properties of the as-cast and annealed Ce₂NiSi₃ alloys, crystallizing in the AlB₂-type hexagonal structure. The DC-magnetic susceptibility data show that the as-cast sample exhibits an antiferromagnetic (AFM) ordering below T_N= 3.8 K, whereas the annealed sample shows, at 4.2 K, a magnetic transition of AFM nature and, around 2.5 K, an additional anomaly. The specific heat shows a peak with at 3.8 K for the as cast sample, which shifts to lower temperatures when the magnetic field increases, consistent with the antiferromagnetic nature of the transition. On the other hand, in the annealed alloy, the maximum of the specific heat peak reaches at 4.2 K, and no additional anomalies were observed. The different magnetic behavior between the as-cast and annealed samples is attributed to thermal effects on the structural disorder of nickel and silicon atoms, as already observed in other isotypic R₂TSi₃ alloys, where R=U or Ce, and T= transition metal.     

Molecular beam epitaxy of superconducting Pr2CuO4 films

Recent reports on superconductivity in parent compounds [RE = Pr, Nd, Sm, Eu, Gd] prepared by metal-organic decomposition (MOD) shed new light on the electronic and magnetic phase diagram of electron-doped cuprates. A thorough reduction process is the key to inducing superconductivity in square-planar coordinated cuprates. In this work, Pr₂CuO₄ films were grown epitaxially by molecular beam epitaxy (MBE) on (001)SrTiO₃, (110)GdScO₃ and (110)DyScO₃ substrates. A modified two-step reduction process is required in order to obtain single-phase superconducting samples. The optimized superconducting properties are , while the room-temperature resistivity is about . Hence, we show that even amorphous Pr₂CuO_y films deposited on (110)DyScO₃ become superconducting after the application of the two-step annealing process. These results indicate that superconductivity is induced to Pr₂CuO₄ by systematic optimization of the reduction conditions, irrespective of the synthesis route.     

Blue and infrared cathodoluminescence induced by carbon-irradiation in SrTiO3 single crystal

We show that blue-CL can be induced in SrTiO₃ single crystal at room temperature by irradiating it with 60 KeV carbon ion (C⁻) beam. An infrared CL-emission is induced simultaneously. Transmission electron microscopy (TEM) measurement exhibits an 200 nm thick surface layer formed by the C⁻ irradiation. We show that the emitting region can be patterned into any desired shape by fabricating the STO surface using Pt-based micro-lithography technique.     

Synthesis and magnetic properties of Li-Mn-Zn spinel oxides

LiMn_2−XZn_XO₄ (X<0.5) compounds were prepared by sol-gel method. The specimens with a large substitution degree (X>0.2) led to symmetry reduction from Fdm to P2₁3 in the spinel oxide, while those with a small substitution degree (X<0.1) had Fdm cubic symmetry. The Zn²⁺-substitution led to the enhancement of the low-temperature magnetic susceptibility and a shift in the Weiss constant from negative to positive, indicating that the dominant exchange interaction changed from antiferromagnetic to ferromagnetic. For the compounds with X=0.5, the spontaneous magnetization was 4.48μ_B and the Curie temperature was approximately 21 K. The experimentally obtained magnetization value was close to the value calculated under the assumption that the spins of the Mn⁴⁺ ions were aligned in ferromagnetic form. In addition, the magnetic properties of Li-Mn-Zn spinel oxides were briefly discussed, and compared with those of Li-Mn-M (M=Ni, Mg) spinel oxides.