Cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate

The physical process of cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate is presented by using the second-order perturbation and the technique of nonlinear reflection of acoustic waves at an interface. In general, the cumulative second-harmonic generation of a dispersive guided wave propagation does not occur. However, the present paper shows that the second-harmonic of Lamb wave propagation arising from the nonlinear interaction of the partial bulk acoustic waves and the restriction of the three boundaries of the solid plates does have a cumulative growth effect if some conditions are satisfied. Through boundary condition and initial condition of excitation, the analytical expression of cumulative second-harmonic of Lamb waves propagation is determined. Numerical results show the cumulative effect of Lamb waves on second-harmonic field patterns.     

Time-domain analysis of second-harmonic generation of primary Lamb wave propagation in an elastic plate

Within the second-order perturbation approximation,this paper investigates the physical process of generation of the time-domain second harmonic by a primary Lamb wave waveform in an elastic plate.The present work is performed based on the preconditions that the phase velocity matching is satisfied and that the transfer of energy from the primary Lamb wave to the double frequency Lamb wave is not zero.It investigates the influences of the difference between the group velocities of the primary Lamb wave and the double frequency Lamb wave,the propagation distance and the duration of the primary Lamb wave waveform on the envelope shape of the time-domain second harmonic.It finds that the maximum magnitude of the envelope of the second-harmonic waveform can grow within some propagation distance even if the condition of group velocity matching is not satisfied.Our analyses also indicate that the maximum magnitude of the envelope of the second-harmonic waveform is kept constant beyond a specific propagation distance.Furthermore,it concludes that the integration amplitude of the time-domain second-harmonic waveform always grows with propagation distance within the second-order perturbation.The present research yields new physical insight not previously available into the effect of generation of the time-domain second harmonic by propagation of a primary Lamb wave waveform.     

Investigation of linear and nonlinear frequency modulated excitation effects on tissue harmonic imaging

The generation of tissue harmonics is due to nonlinear nature of ultrasound wave propagation in biological tissues.The tissue harmonics for imaging i.e.tissue harmonic imaging (THI)uses higher frequency components for imaging in which the resolution improves significantly but signal-to-noise ratio(SNR)and penetration depth remains low as compared to both fundamental and second harmonic imaging.The coded excitations have potential to improve the SNR which ultimately leads to improved penetration depth.In the present work,the linear frequency modulated(chirp/LFM)and nonlinear frequency modulated(NLFM)signals have been used to investigate the nonlinear ultrasound wave propagation and harmonic generation in biological tissues.The SNR has been found to be substantially improved for coded tissue harmonic imaging(CTHI)as well as for coded superharmonic imaging(CSHI).     

Study on laser-generated Lamb waves propagation in viscoelastic and anisotropic plate

The propagation characteristics of laser-generated Lamb waves in thin composite plates are theoretically studied. Taking the anisotropic and viscoelastic properties of the composite material into account, the finite element models for simulating laser-generated Lamb waves in the composite material are established in the frequency domain. Numerical results are calculated in purely elastic and viscoelastic transversely isotropic plates, respectively. The effects of the anisotropic and viscoelastic properties on the propagation of Lamb waves are analyzed in detail. The numerical results exhibit that the features of the laser-generated Lamb wave, including attenuation, velocity, frequency, and the dispersive nature, have a close relationship with the anisotropic and viscoelastic properties of the material.     

Modal expansion analyses of ultrasonic Lamb waves generated by electromagnetic ultrasonic transducers

A modal expansion approach has been proposed for investigating generation of ultrasonic Lamb waves by electromagnetic acoustic transducers（EMATs）.Based on the current distribution of the EMAT＇s meandering coil,the formal solution for the Lorentz surface stress applied on the plate surface has been derived.Then the function of the wave-number spectral density of the Lorentz surface stress for generating ultrasonic Lamb waves has been obtained using the spatial Fourier transform.On this basis,with the modal expansion approach for waveguide excitation,the mathematical expression of the Lamb wave＇s mode expansion coefficient has been deduced,which is closely related with the geometrical parameters of the EMAT＇s meandering coil.The mathematical relationship between the Lamb wave＇s mode expansion coefficient and the EMAT＇s geometrical parameters,obtained in this paper,lays a theoretical foundation for exactly analyzing generation of Lamb waves by EMATs.Further,the numerical analyses performed indicate that the Lamb wave＇s mode expansion coefficient can be appropriately adjusted by changing the geometrical parameters of the EMAT＇s coil,and thus the unwanted Lamb wave modes can be effectively restrained.This result provides a theoretical basis for generating a single and pure Lamb wave mode by the meandering coil EMAT.     

Cumulative solutions of nonlinear longitudinal vibration in isotropic solid bars

Based on the strain invariant relationship and taking the high-order elastic energy into account, a nonlinear wave equation is derived, in which the excitation, linear damping, and the other nonlinear terms are regarded as the first-order correction to the linear wave equation. To solve the equation, the biggest challenge is that the secular terms exist not only in the fundamental wave equation but also in the harmonic wave equation （unlike the Duffing oscillator, where they exist only in the fundamental wave equation）. In order to overcome this difficulty and to obtain a steady periodic solution by the perturbation technique, the following procedures are taken： （i） for the fundamental wave equation, the secular term is eliminated and therefore a frequency response equation is obtained; （ii） for the harmonics, the cumulative solutions are sought by the Lagrange variation parameter method. It is shown by the results obtained that the second- and higher-order harmonic waves exist in a vibrating bar, of which the amplitude increases linearly with the distance from the source when its length is much more than the wavelength; the shift of the resonant peak and the amplitudes of the harmonic waves depend closely on nonlinear coefficients; there are similarities to a certain extent among the amplitudes of the odd- （or even-） order harmonics, based on which the nonlinear coefficients can be determined by varying the strain and measuring the amplitudes of the harmonic waves in different locations.     

Generation of acoustic waves in the hypersonic boundary layer over a wavy wall

The effects of a wavy wall on a hypersonic boundary layer of a flared cone are investigated using experimental measurements and direct numerical simulations(DNSs). Non-contact optical measurements using a focused laser differential interferometer(FLDI) show that a wavy wall can significantly suppress the second mode, and multiple perturbations of new frequencies are generated over the wavy surface, which agrees well with numerical results. Using Lagrangian tracking of marked particles, it is demonstrated that the wavy wall geometry can induce mean flow oscillations while exciting acoustic waves. The frequencies of the excited disturbances over a wavy wall agree with the classical Rossiter model. The superposition of a disturbance propagating downstream and an acoustic wave propagating upstream at the same frequency but with different amplitudes and propagation velocities results in a spatial distribution with a streamwise-oscillatory pattern over the wavy surface. A simple two-wave superposition model that takes into account the phase velocities and wavenumbers of the convective disturbance and acoustic wave can well describe the modal behavior of excited disturbances over a wavy wall.     

General solution of cumulative second harmonic by Lamb wave propagation in a solid plate

A straightforward approach has been developed for the general solution of cumulative second harmonic by Lamb wave propagation in a solid plate. The present analyses of second-harmonic generation by Lamb waves focus on the cases where the phase velocity of the fundamental Lamb wave is exactly or approximately equal to that of the double frequency Lamb wave （DFLW）. Based on the general solution obtained, the numerical analyses show that the cumulative second-harmonic fields are associated with the position of excitation source and the difference between the phase velocity of the fundamental Lamb wave and that of the dominant DFLW component.     

Location of micro-cracks in plates using time reversed nonlinear Lamb waves

A promising tool to detect micro-cracks in plate-like structures is used for generating higher harmonic Lamb waves. In this paper, a method combining nonlinear S_0 mode Lamb waves with time reversal to locate micro-cracks is presented and verified by numerical simulations. Two different models, the contact acoustic nonlinearity(CAN) model and the Preisach–Mayergoyz(PM) model, are used to simulate a localized damage in a thin plate. Pulse inversion method is employed to extract the second and fourth harmonics from the received signal. Time reversal is performed to compensate the dispersion of S_0 mode Lamb waves. Consequently, the higher harmonics generated from the damaged area can be refocused on their source. By investigating the spatial distribution of harmonic wave packets, the location of micro-cracks will be revealed.The numerical simulations indicate that this method gives accurate locations of the damaged area in a plate. Furthermore,the PM model is proved to be a suitable model to simulate the micro-cracks in plates for generation of higher harmonics.     

Weak-Coupling Theory for Semiclassical Periodically Driven Two-Level Systems： Beyond Rotating-Wave Approximation

In this paper,(2 1)-dimensional electron acoustic waves (EAW) in an unmagnetized collisionless plasma have been studied by the linearized method and the reductive perturbation technique,respectively.The dispersion relation and a modified Kadomtsev-Petviashvili (KP) equation have been obtained for the EAW in the plasma considering a cold electron fluid and a vortex-like hot electrons.It is found from some numerical results that the parameter β (the ratio of the free hot electron temperature to the hot trapped electron temperature) effects on the amplitude and the width of the electron acoustic solitary waves (EASW).It can be indicated that the free hot electron temperature and the hot trapped electron temperature have very important effect on the characters of the propagation for the EASW.