Ultrasound assisted catalytic wet peroxide oxidation of phenol: kinetics and intraparticle diffusion effects

The combination of ultrasound irradiation and catalytic wet peroxide oxidation was used as a means to degrade phenol. Direct and indirect irradiation were employed, while experiments in the absence of ultrasound were used as reference. A mixed (Al-Fe) pillared clay named FAZA, was used as a catalyst in the form of powder, extrudates and crushed extrudates. Ultrasound was found to clearly enhance the extrudates performance, increasing the conversion at 4h by more than 6 times under direct and almost 11 times under indirect irradiation. This observation is attributed to the reduction of diffusion resistance within the catalyst pores. The overall sonication-catalytic wet peroxide oxidation process appears very promising for environmental purposes.     

Sono-catalytic degradation and fast mineralization of p-chlorophenol: La0.7Sr0.3MnO3 as a nano-magnetic green catalyst

La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles with a perovskite structure were prepared by a combination of ultrasound and co-precipitation method. The synthesized catalyst was characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy. The catalytic performance of the catalyst was evaluated for the degradation of 4-chlorophenol in the presence and in the absence of ultrasound. The degradation has been studied at different temperatures, pH, catalyst dosage, and initial concentration of 4-chlorophenol. The results have shown that the degradation efficiency was higher in the presence of ultrasound than its absence under the mild conditions. More than 88% decrease in the concentration and 85% decrease in the TOC for 4-chlorophenol could be achieved in a short time of sonication with respect to the conventional method. This behavior could be attributed to the cavitation process which followed by a high mass transfer on the catalyst with high surface area. These conditions led to facilitate the removal of pollutant from aqueous solution. The results also indicated that the catalyst without recalcination can be used successfully up to five consecutive cycles without any significant loss in activity in the presence and in the absence of ultrasound. In addition, the most important is the magnetic property of the nanoparticles which separated easily from aqueous solution by an external magnetic field.     

Investigation on the transition crystal of ordinary rutile TiO2 powder by microwave irradiation in hydrogen peroxide solution and its sonocatalytic activity

The transition crystal TiO(2) catalyst with high sonocatalytic activity was obtained utilizing the microwave irradiation in hydrogen peroxide solution. At the same time a series of affecting factors (microwave irradiation time, heat-treated time and heat-treated temperature) to prepare the TiO(2) catalyst on the sonocatalytic degradation of parathion were considered in this paper. The ultrasound of low power was used as an irradiation source to induce treated TiO(2) particles to perform catalytic activity. The results show that the sonocatalytic activity of the transition crystal TiO(2) powder is obviously higher than those of pure ordinary rutile and anatase TiO(2) powders. At last, the parathion in aqueous solution was degraded completely and became some simple inorganic ions such as NO(3)(-), PO(4)(3-), SO(4)(2-), etc. The degradation ratio of parathion in the presence of the transition crystal TiO(2) catalyst attains nearly 80% within 60 min ultrasonic irradiation, while corresponding ones are only 65.23% and 53.88%, respectively, for pure ordinary rutile and anatase TiO(2) powders.     

Ultrasound-assisted oxidation of dibenzothiophene with phosphotungstic acid supported on activated carbon

Phosphotungstic acid (HPW) supported on activated carbon (AC) was applied to catalyze deep oxidation desulfurization of fuel oil with the assist of ultrasound. The sulfur-conversion rate was evaluated by measuring the concentration of dibenzothiophene (DBT) in n-octane before and after the oxidation. Supporting HPW on AC has been verified to play a positive role in UAOD process by a series of contrast tests, where only HPW, AC or a mixture of free HPW and AC was used. The influences of catalyst dose, ultrasound power, reaction temperature, H₂O₂:oil volume ratio and the reuse of catalyst on the catalytic oxidation desulfurization kinetics were investigated. The DBT conversion rate of the reaction catalyzed by supported HPW under ultrasound irradiation was higher than the summation of the reactions with HPW only and AC only as catalyst. With the increase of loading amount of HPW on AC, ultrasound power, H₂O₂:oil volume ratio and reaction temperature, the catalytic oxidation reactivity of DBT would be enhanced. The optimum loading amount of HPW was 10%, exceed which DBT conversion would no longer increase obviously. DBT could be completely converted under the optimized conditions (volume ratio of H₂O₂ to model oil: 1:10, mass ratio of the supported HPW to model oil: 1.25%, temperature: 70 °C) after 9 min of ultrasound irradiation.     

Ethoxylation of p-chloronitrobenzene using phase-transfer catalysts by ultrasound irradiation: a kinetic study

Ethoxy-4-nitrobenzene was synthesized by the reaction of 4-chloronitrobenzene with potassium ethoxide in a homogeneous system using benzyltriethylammonium chloride (QCl) as a phase-transfer catalyst at 50 degrees C under ultrasound irradiation conditions. The use of phase-transfer catalysts and ultrasound has been compared and demonstrated in this nucleophilic substitution reactions. The kinetics of the reaction depends on the effect of amount of catalyst, quaternary ammonium salts, agitation speed, amount of potassium hydroxide, amount of ethanol, temperature and the frequency of the ultrasound waves on the conversion of the reaction.     

Ultrasound assisted enzyme catalyzed hydrolysis of waste cooking oil under solvent free condition

The present work demonstrates the hydrolysis of waste cooking oil (WCO) under solvent free condition using commercial available immobilized lipase (Novozyme 435) under the influence of ultrasound irradiation. The process parameters were optimized using a sequence of experimental protocol to evaluate the effects of temperature, molar ratios of substrates, enzyme loading, duty cycle and ultrasound intensity. It has been observed that ultrasound-assisted lipase-catalyzed hydrolysis of WCO would be a promising alternative for conventional methods. A maximum conversion of 75.19% was obtained at mild operating parameters: molar ratio of oil to water (buffer pH 7) 3:1, catalyst loading of 1.25% (w/w), lower ultrasound power 100 W (ultrasound intensity – 7356.68 W m⁻²), duty cycle 50% and temperature (50 °C) in a relatively short reaction time (2 h). The activation energy and thermodynamic study shows that the hydrolysis reaction is more feasible when ultrasound is combined with mechanical agitation as compared with the ultrasound alone and simple conventional stirring technique. Application of ultrasound considerably reduced the reaction time as compared to conventional reaction. The successive use of the catalyst for repetitive cycles under the optimum experimental conditions resulted in a loss of enzymatic activity and also minimized the product conversion.     

Sonocatalytic and sonophotocatalytic degradation of rhodamine 6G containing wastewaters

The present work deals with degradation of aqueous solution of Rhodamine 6G (Rh 6G) using sonocatalytic and sonophotocatalytic treatment schemes based on the use of cupric oxide (CuO) and titanium dioxide (TiO₂) as the solid catalysts. Experiments have been carried out at the operating capacity of 2 L and constant initial pH of 12.5. The effect of catalyst loading on the sonochemical degradation has been investigated by varying the loading over the range of 1.5–4.5 g/L. It has been observed that the maximum degradation of 52.2% was obtained at an optimum concentration of CuO as 1.5 g/L whereas for TiO₂ maximum degradation was observed as 51.2% at a loading of 4 g/L over similar treatment period. Studies with presence of radical scavengers such as methanol (CH₃OH) and n-butanol (C₄H₉OH) indicated lower extents of degradation confirming the dominance of radical mechanism. The combined approach of ultrasound, solid catalyst and scavengers has also been investigated at optimum loadings to simulate real conditions. The optimal solid loading was used for studies involving oxidation using UV irradiations where 26.4% and 28.9% of degradation was achieved at optimal loading of CuO and TiO_2, respectively. Studies using combination of UV and US irradiations have also been carried out using the optimal concentration of the catalysts. It has been observed that maximum degradation of 63.3% is achieved using combined US and UV with TiO₂ (4 g/L) as the photocatalyst. Overall it can be said that the combined processes give higher extent of degradation as compared to the individual processes based on US or UV irradiations.     

The enhanced catalytic degradation of SiO<Subscript>2</Subscript>/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/C@TiO<Subscript>2</Subscript> photo-Fenton system on p-nitrophenol

Heterogeneous photo-Fenton SiO₂/Fe₃O₄/C@TiO₂ (SFCT) catalyst with a core-multishell structure and a diameter of about 550 nm was successfully prepared and was characterized by scanning electron microscopy (SEM), TEM, XRD, Raman, and Fourier transform infrared (FT-IR). The results illustrated that anatase TiO₂ coexisted with rutile TiO₂, in which the anatase phase was the main crystal phase. In addition, the catalytic activity of SFCT catalyst had been evaluated in the catalytic degradation on p-nitrophenol (PNP). The influence factors on the PNP degradation, including SFCT component ratio (m _SFC/ m _TiO2), H₂O₂ dosage, solution pH, and PNP concentration, had been investigated. And the contrast experiments about the photo-Fenton catalytic mechanism revealed that the SFCT-2 catalyst possessed a superior activity in the neutral environment due to the optimal activity matching between Fe₃O₄ and TiO₂, and it exhibited the stable catalytic performance after five successive recycles. Therefore, the SFCT-2 catalyst had a promising application for the photo-Fenton degradation of organic contaminant.     

Ultrasound-Engineered fabrication of immobilized molybdenum complex on Cross-Linked poly (Ionic Liquid) as a new acidic catalyst for the regioselective synthesis of pharmaceutical polysubstituted spiro compounds

A novel supported molybdenum complex on cross-linked poly (1-Aminopropyl-3-vinylimidazolium bromide) entrapped cobalt oxide nanoparticles has been successfully fabricated through two different procedures, i.e. ultrasound (US) irradiations (100 W, 40 kHz) and reflux. The efficiency of the two different methods was comparatively investigated on the fundamental properties of proposed catalyst using diverse characterization techniques. Based on the obtained results, the ultrasonication method provides controlled polymerization process; as a result, well connected polymeric network is formed. In addition, the use of ultrasound waves turned out to be able to increase the particles uniformity, specific surface area (from 79.19 to 223.83 m²/g), and the onset thermal degradation temperature (T_d) value (from 248 to 400 °C) of the prepared catalyst which intensifies the catalytic efficiency. Besides, US-treated catalyst demonstrated high chemical stability and maintained its cross-linked network after eight cycles recovery, while the cross-linked network of catalyst obtained under silent condition was completely disrupted. Furthermore, the ultrafast multi-step fabrication procedure was performed in less than 6 h under ultrasonic condition while a similar process promoted by a mechanical stirring method came to a conclusion after 5–6 days. Accordingly, the utility of the ultrasound irradiation was proved, and US-treated catalyst was applied for improved synthetic methodology of spiro 1,4-dihydropyridines and spiro pyranopyrazoles through different acidic active sites. Due to the significant synergistic influence between the proposed catalyst and US irradiation, a variety of novel and recognized mono-spiro compounds were fabricated at room temperature in high regioselectivity.     

K-Co-Mo/CNTs催化剂合成低碳醇性能研究

A series of carbon nanotubes-supported K-Co-Mo catalysts were prepared by a sol-gel method combined with incipient wetness impregnation.The catalyst structures were characterized by X-ray diffraction,N₂ adsorption-desorption,transmission electron microscopy and H₂-TPD,and its catalytic performance toward the synthesis of higher alcohols from syngas was investigated.The as-prepared catalyst particles had a low crystallization degree and high dispersion on the outer and inner surface of CNTs.The uniform mesoporous structure of CNTs increased the diffusion rate of reactants and products,thus promoting the reaction conversion.Furthermore,the incorporation of CNTs support led to a high capability of hydrogen absorption and spillover and promoted the formation of alkyl group,which served as the key intermediate for the alcohol formation and carbon chain growth.Benefiting from these characteristics,the CNTs supported Mo-based catalyst showed the excellent catalytic performance for the higher alcohols synthesis as compared to the unsupported catalyst and activated carbon supported catalyst.