首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
覃斌毅  陈铁军  邱杰  黄志文  朱望纯 《应用声学》2014,22(10):3312-3315
随着分布式测试技术的快速发展,对地理位置分散的测试设备协同完成测试任务的需求也越来越大,而设备之间的时钟同步精度成为制约测试效果的关键因素;为了对时钟同步精度的影响因素进行研究,提出了基于IEEE1588协议的网络时钟同步实现方案;首先对IEEE1588基本原理进行分析,然后提出了IEEE1588协议的实现方案,最后搭建实验平台对影响同步精度的因素进行研究;研究结果表明,同步间隔和网络拓扑结构影响时钟同步精度的两个主要因素。  相似文献   

2.
IEEE 1588时钟同步协议用于解决分布式网络测控系统中远距离仪器设备之间的同步问题;在分析IEEE 1588时钟同步实现原理的基础上,提出一种嵌入式Linux设备的高精度IEEE 1588时钟同步实现方案;采用专用PHY芯片DP83640在物理层为PTP报文加盖硬件时间戳,设计网络设备驱动与PTP硬件时钟控制驱动,并在用户层利用Linux系统标准API实现IEEE 1588协议软件;实验结果表明,两台设备直接相连时,时钟同步精度可稳定在±100 ns以内。  相似文献   

3.
寇海洋  段雄英 《应用声学》2015,23(8):2759-2761
随着电力系统复杂程度的提高,智能化变电站对系统内各节点时钟同步精度的要求越来越高;IEEE1588 精确时钟同步协议的应用使得系统内时钟同步精度达到纳秒级别;文章对IEEE1588时钟同步的原理进行了分析,设计了基于STM32F407处理器的时钟同步系统;介绍了本地时钟向量调节与频率调节两种时钟调节方式;最后测试主从时钟同步精度,结果表明同步精度在200 ns以内,满足智能变电站对系统内时钟同步精度的要求。  相似文献   

4.
刘辉  林威  王培盛  张钦宇 《应用声学》2014,22(11):3774-37763826
EtherCAT是一种实时工业以太网协议;基于EtherCAT实时性强的特点,重点研究了EtherCAT分布时钟机制,并提出了在嵌入式设备上基于实时操作系统μC/OS II完成主站设计的方案;通过分析传输延时补偿、初始偏移补偿、动态漂移补偿等时钟同步过程,完成了对主站系统时钟同步技术的设计;基于环形冗余结构搭建了一主三从的EtherCAT测试系统,并通过计算机、示波器等设备采集得到从站间产生SYNC0信号的时间差值数据;最后,根据SYNC0周期为1 ms的数据,分析得到系统时钟误差维持在55 ns以内的同步性能,为时钟同步技术的理论研究提供了数据支持。  相似文献   

5.
误差补偿是保证水下传感器网络时钟同步精度的一个重要保障,现有研究方法主要采用线性拟合和最小二乘法对时钟同步参数进行误差补偿,但该类方法并未考虑受海流影响时节点移动所导致的时钟同步精度问题.针对此问题,本文提出一种基于BP神经网络模型的时钟同步误差补偿算法.首先采用深海拉格朗日洋流模型描述水下节点运动规律,模拟水下节点运动速度,进而建立时钟同步参数模型,最后构建符合水下环境的BP神经网络时钟同步误差补偿模型,通过定义激励函数,引入正则项因子和补偿性因子避免模型过拟合,建立误差反向传播的BP神经网络模型时钟同步误差补偿算法.仿真实验表明,本文提出的算法与TSHL算法、MU-sync算法、MM-sync算法相比,在时钟同步精度(即时钟同步时间与标准时间的误差)上分别提升了37.42%, 17.29%和21.86%,并且均方误差得到显著降低.  相似文献   

6.
谢静  庹先国  毛小波  荣文钲 《应用声学》2015,23(9):3195-3198
为了同步微震监测系统中各分布式采集节点时钟和提高其精度,提出一种基于PTP(precision time protocol)时钟协议的微震数据同步采集设计方案。该方案将计算机时钟作为系统主时钟,以STM32为处理器,IP178CH为网卡驱动设计时钟分配器,并在其中植入PTP时钟协议,然后通过时钟分配器向网络中各采集节点周期性发送同步信号,最后通过时间偏差和网络延迟时间对每个节点的RTC时钟进行校准,使其与主时钟保持一致,从而实现了节点数据同步采集,其时钟同步精度达到了μs级。  相似文献   

7.
冯飞  王雪妍 《应用声学》2016,24(9):133-135
针对化工装置有DCS,SIS,CCS等多套控制系统的情况,采用GPS时间服务器,设计了一个通过SNTP协议完成多控制系统时钟同步的技术方案;介绍了GPS时间服务器的设置,DCS时间组的设置,CCS系统时钟同步软件的设置以及SIS系统时钟同步的两种设置方案;实现了不同装置多控制系统之间的全局时钟同步;保障了工艺参数趋势记录,SOE记录,工艺人员操作记录时间基准的一致性和准确性;有利于生产事故原因的查找与分析。  相似文献   

8.
工业以太网协议Ethernet POWERLINK(EPL)分布式站点的时钟同步方法并不能在实时运行过程中保持很高的同步精度,无法满足特定环境下的控制要求。研究了工业以太网协议EPL的两种时钟同步机制,通过数理计算分析了时钟同步误差产生的原因,针对误差较大的缺点,提出了减小误差的方法。通过迭代计算消除了主从站同步报文往返的路径延迟,并设计基于现场可编程门阵列(FPGA)的集线器(Hub)用于EPL菊花链网络拓扑结构,有效地克服了时钟同步报文往返传输延时不一致的缺点,测试结果表明新方法明显优于协议自身的时钟同步方法,对于实现基于EPL的高精度分布式时钟同步网络具有重要意义。  相似文献   

9.
针对目前分布式无线地震数据采集中由于采集节点增多、无线传输延时等因素导致的各采集节点间数据采集同步精度不高的问题,研究并设计了一种针对分布式无线数据同步采集中各个节点同步授时以及对采集数据包进行精确时间标记的方案。采用GPS(Global Positioning System)授时技术对各个采集节点时钟进行授时,同时利用GPS精准的秒脉冲对本地压控晶振器频率误差进行实时修正。采用在地震采集数据包中加入精确的时间戳信息的方法,保证了各个节点间同步误差限制在0.1ms以内。即使在GPS失效的情况下,压控晶振器和计数器联合作用仍可保证各节点同步采集稳定工作6小时。  相似文献   

10.
谷士鹏  刘明  支高飞 《应用声学》2016,24(5):25-27, 31
为深入研究不同机载测试网络环境对IEEE 1588时钟同步系统性能的影响,提出了使用正态分布曲线描绘时钟同步误差的方法。通过分析IEEE1588时钟同步系统的工作原理,决定采用硬件方式测量时钟同步误差分布,并利用统计学的分析方法,分析不同的机载测试网络环境对IEEE 1588时钟同步系统性能的影响。分析结果表明网络拓扑结构、网络节点负载和外部环境温度都对IEEE 1588时钟同步系统的性能有一定影响,其中网络拓扑结构的变化对IEEE1588时钟同步精度的影响比较大。这一研究成果对网络化机载测试系统的设计与使用具有一定的借鉴意义。  相似文献   

11.
Understanding the coupling of graphene with its local environment is critical to be able to integrate it in tomorrow's electronic devices. Here we show how the presence of a metallic substrate affects the properties of an atomically tailored graphene layer. We have deliberately introduced single carbon vacancies on a graphene monolayer grown on a Pt(111) surface and investigated its impact in the electronic, structural, and magnetic properties of the graphene layer. Our low temperature scanning tunneling microscopy studies, complemented by density functional theory, show the existence of a broad electronic resonance above the Fermi energy associated with the vacancies. Vacancy sites become reactive leading to an increase of the coupling between the graphene layer and the metal substrate at these points; this gives rise to a rapid decay of the localized state and the quenching of the magnetic moment associated with carbon vacancies in freestanding graphene layers.  相似文献   

12.
13.
14.
基于Matlab分析负荷对多联机IPLV的影响   总被引:1,自引:0,他引:1  
多联机有其特殊的优点,但是不同部分负荷的组合对IPLV的影响仍需进一步研究。文中建立IPLV与部分负荷的相关公式,运用MATLAB软件分析不同卸载级负荷与IPLV的关系,从而确定不同部分负荷的最优组合。  相似文献   

15.
16.
In this note we use some of the results of [3] to derive a general duality theorem for the cohomologies of foliated structures on a manifold. The result is applied to the special case of a symplectic manifold M on which the foliation is given by a complex polarization F in the sense of geometric quantization. We obtain, for example, a rigorous proof of the fact that for a smooth function ƒ on M whose Hamiltonian vector field leaves F invariant, the spectrum of the corresponding prequantization operator v(ƒ) coincides with the spectrum of its transpose, under the above duality. This latter result was obtained by Simms in [12] under certain hypotheses. Proofs of the validity of those hypotheses are now available in the literature; cf. [3] and [7].  相似文献   

17.
Analyzes the effects of space charge shielding on the steady state of a multipactor discharge on a dielectric. Analytic methods are used to obtain an exact function for the potential in the discharge, assuming a Maxwellian distribution of emitted electrons. An equation for the amount of power deposited on the dielectric by the multipactoring electrons, for a given saturation level, is given. A simple method for obtaining the saturation level, for a given material, is obtained  相似文献   

18.
We study the relation between the centro-affine geometry of star-shaped planar curves and the projective geometry of parametrized maps into RP1. We show that projectivization induces a map between differential invariants and a bi-Poisson map between Hamiltonian structures. We also show that a Hamiltonian evolution equation for closed star-shaped planar curves, discovered by Pinkall, has the Schwarzian KdV equation as its projectivization. (For both flows, the curvature evolves by the KdV equation.) Using algebro-geometric methods and the relation of group-based moving frames to AKNS-type representations, we construct examples of closed solutions of Pinkall’s flow associated with periodic finite-gap KdV potentials.  相似文献   

19.
20.
基于密度泛函理论的第一性原理计算方法,研究了Pt原子在五边形石墨烯(PG)上的吸附与动力学行为.研究结果表明,单个Pt原子在PG上虽然具有较大的吸附能及较高的扩散势垒,却不能够在衬底形成均匀分散的单原子.这是因为,随Pt原子数增加,Ptn(n=1, 2, 3)在PG上的平均结合能也逐渐增加,更倾向于形成团簇,该发现有效否定了之前的报道称Pt能在PG上形成稳定的单原子催化剂这一结论(Phys. Chem. Chem. Phys. 21, 12201 (2019)).基于此,我们考虑对PG施加双轴应变,随着拉伸应力增加,Pt金属原子间的平均结合能逐渐降低,当拉伸应变施加至12%左右时,单个Pt在衬底上的结合能与Pt2在衬底上的平均结合能相等,从而实现PG上均匀分散的Pt单原子催化剂.该结果对五边形石墨烯基材料应变调控实现单原子催化剂提供理论借鉴.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号