Nitrogen plasma cleaning of Ge(1 0 0) surfaces

We propose a dry method of cleaning Ge(1 0 0) surfaces based on nitrogen plasma treatment. Our in situ Auger electron spectroscopy (AES) and low-energy electron diffraction (LEED) analyses demonstrate that surface contamination remaining after wet treatment was effectively removed by nitrogen radical irradiation at low substrate temperatures. The nitrogen plasma cleaned Ge(1 0 0) surface shows a well-ordered 2 × 1 reconstruction, which indicates the formation of a contamination-free Ge(1 0 0) surface with good crystallinity. We discuss the possible reaction mechanism considering how chemisorbed carbon impurities are removed by selective C-N bond formation and subsequent thermal desorption. These findings imply the advantage of plasma nitridation of Ge surfaces for fabricating nitride gate dielectrics, in which we can expect surface pre-cleaning at the initial stage of the plasma treatment.     

Adsorption of Cs on InAs(1 1 1) surfaces

Caesiated InAs(1 1 1)B (1 × 1) and InAs(1 1 1)A (2 × 2) surfaces have been studied by photoelectron spectroscopy. On the InAs(1 1 1)B a new (√3 × √3)R30° reconstruction was observed. During Cs evaporation remarkably small changes are observed in the lone pair states, and no sign of an accumulation layer at the surface can be observed. Instead, the additional charge provided by Cs is rapidly transported towards the bulk. On the InAs(1 1 1)A cesium behaves as a typical electropositive alkali metal donator that enhances the already existing accumulation layer.     

Silicon quantum wires on Ag(1 1 0): Fermi surface and quantum well states

One-dimensional Si quantum wires have been grown on silver single crystals upon deposition of ∼0.25 monolayer of Si on Ag(1 1 0) surfaces. Scanning tunneling microscopy (STM) clearly shows parallel 1D Si chains along the [−1 1 0] Ag crystallographic direction. Low Energy Electron Diffraction (LEED) confirms the massively parallel assembly of these selforganized Nanowires (NWs). We have characterized these nano-objects by measuring the dispersion of the NWs valence band at room temperature using Angle-Resolved PhotoEmission Spectroscopy (ARPES). Also, the Fermi Surface (FS) of the Ag(1 1 0) substrate has been mapped before and after the silicon deposition, trying to put in evidence the metallic or semiconductor character of the NWs silicon's states close to the Fermi level. Our results show the existence of well-defined quantum states associated to the silicon super-structure. Both LEED and ARUPS results confirm that the NWs have typical 1D features, however their metallic or semiconductor character could not be confirmed.     

Growth of ultra-thin cerium oxide layers on Cu(1 1 1)

The reactive vacuum deposition of CeO₂ on Cu(1 1 1) surface in oxygen atmosphere provides high quality epitaxial ceria overlayers. We report the growth characteristics of Ce oxide, the structures, and the temperature stability of the oxide phases as investigated by low-energy electron diffraction (LEED) and X-ray photoelectron spectroscopy. We find that Ce oxide on the Cu(1 1 1) grows initially in the form of islands giving sharp hexagonal LEED pattern of the CeO₂(1 1 1) structure corresponding to the (1.5 × 1.5) structure. The CeO₂-Cu(1 1 1) films exhibited mixed valence states and temperature dependent CeO₂-Ce₂O₃ transition above 900 K due to the vacuum annealing. The transition progressed more rapidly at the surface, probably by formation of oxygen vacancies.     

Molecular adsorption and growth of naphthalene films on Ag(1 0 0)

The adsorption of naphthalene, vacuum deposited on a Ag(1 0 0) surface, was comprehensively investigated by means of low-energy electron diffraction (LEED), temperature-programmed thermal desorption (TPD) spectroscopy, X-ray photoelectron spectroscopy (XPS), and polarization-dependent near-edge X-ray absorption fine structure (NEXAFS) spectroscopy in the mono- and multilayer regime. A growth of long-range ordered monolayer at 140 K is observed with LEED. The polarization-dependent C 1s NEXAFS shows that the naphthalene molecules in the monolayer lie almost parallel to the Ag(1 0 0) surface. With increasing film thickness, the molecular orientation turns to upright position. Furthermore, NEXAFS measurements show that in the multilayer regime the molecular orientation depends on the substrate temperature during deposition.     

Growth of pentacene on Ag(1 1 1) surface: A NEXAFS study

Thin films of pentacene (C₂₂H₁₄) have become widely used in the field of organic electronics. Here films of C₂₂H₁₄ of thickness ranging from submonolayer to multilayer were thermally deposited on Ag(1 1 1) surface. The determination of molecular geometry in pentacene films on Ag(1 1 1) studied by X-ray absorption at different stages of growth up to one monolayer is presented.XAS spectra at the C K-edge were collected as a function of the direction of the electric field at the surface. The different features of the spectra were assigned to resonances related to the various molecular unoccupied states by the comparison with the absorption coefficient of the pentacene gas phase. The transitions involving antibonding π states show a pronounced angular dependence for all the measured coverages, from submonolayer to multilayer. The spectra analysis indicates a nearly planar chemisorption of the first pentacene layer with a tilt angle of 10°.     

Combined EELS, LEED and SR-XPS study of ultra-thin crystalline layers of indium nitride on InP(1 0 0)—Effect of annealing at 450 °C

In this study, InP(1 0 0) surfaces were bombarded by argon ions in ultra high vacuum. Indium metallic droplets were created in well controlled quantities and played the role of precursors for the nitridation process. A glow discharge cell was used to produce a continuous plasma with a majority of N atomic species. X-ray photoelectron spectroscopy (XPS) studies indicated that the nitrogen combined with indium surface atoms to create InN thin films (two monolayers) on an In rich-InP(1 0 0) surface. This process occurred at low temperature: 250 °C. Synchrotron radiation photoemission (SR-XPS) studies of the valence band spectra, LEED and EELS measurements show an evolution of surface species and the effect of a 450 °C annealing of the InN/InP structures. The results reveal that annealing allows the crystallization of the thin InN layers, while the LEED pattern shows a (4 × 1) reconstruction. As a consequence, InN related structures in EELS and valence bands spectra are different before and after the annealing. According to SR-XPS measurements, the Fermi level is found to be pinned at 1.6 eV above the valence band maximum (VBM).     

GaN nucleation on (0 0 0 1)-sapphire via ion-induced nitridation of gallium

The growth of epitaxial GaN films on (0 0 0 1)-sapphire has been investigated using X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED). In order to investigate the mechanism of the growth in detail, we have focused on the nitridation of pre-deposited Ga layers (droplets) using ion beam-assisted molecular beam epitaxy (IBA-MBE). Comparative analysis of XPS core-level spectra and LEED patterns reveals, that nitride films nucleate as epitaxial GaN islands. The wetting of the surface by GaN proceeds via reactive spreading of metallic Ga, supplied from the droplets. The discussed growth model confirms, that excess of metallic Ga is beneficial for GaN nucleation.     

Growth of thin Fe(0 0 1) films for terahertz emission experiments

The electrical and magnetic properties of thin iron (Fe) films have sparked significant scientific interest. Our interest, however, is in the fundamental interactions between light and matter. We have discovered a novel application for thin Fe films. These films are sources of terahertz (THz) radiation when stimulated by an incident laser pulse. After intense femtosecond pulse excitation by a Ti:sapphire laser, these films emit picosecond, broadband THz frequencies. The terahertz emission provides a direct measure of the induced ultrafast change in magnetization within the Fe film. The THz generation experiments and the growth of appropriate thin Fe films for these experiments are discussed. Several criteria are used to select the substrate and film growth conditions, including that the substrate must permit the epitaxial growth of a continuous, monocrystalline or single crystal film, yet must also be transparent to the emitted THz radiation. An Fe(0 0 1) film grown on the (0 0 1) surface of a magnesium oxide (MgO) substrate makes an ideal sample. The Fe films are grown by physical vapor deposition (PVD) in an ultrahigh vacuum (UHV) system. Low energy electron diffraction (LEED) and Auger electron spectroscopy (AES) are used to characterize the Fe(0 0 1) films. Two substrate surface preparation methods are investigated. Fe(0 0 1) films grown on MgO(0 0 1) substrates that are used as-received and films grown on MgO(0 0 1) substrates that have been UV/ozone-cleaned ex vacuo and annealed in vacuo produce the same results in the THz generation experiments. Either substrate preparation method permits the growth of samples suitable for the THz emission experiments.     

Infrared reflection absorption study of carbon monoxide adsorption on Pd/Cu(1 1 1)

Pd-Cu bimetallic surfaces formed through a vacuum-deposition of Pd on Cu(1 1 1) have been discussed on the basis of carbon monoxide (CO) adsorption: CO is used as a surface probe and infrared reflection absorption (IRRAS) spectra are recorded for the CO-adsorbed surfaces. Low energy electron diffraction (LEED) patterns for the bimetallic surfaces reveal six-fold symmetry even after the deposition of 0.6 nm. The lattice spacings estimated by the separations of reflection high-energy electron diffraction (RHEED) streaks increase with increasing Pd thickness. Room-temperature CO exposures to the bimetallic surfaces formed by the Pd depositions less than 0.3 nm thickness generate the IRRAS bands due to the three-fold-hollow-, bridge- and linear-bonded CO to Pd atoms. In particular, on the 0.1 nm-thick Pd surface, the linear-bonded CO band becomes apparent at an earlier stage of the exposure. In contrast, the bridge-bonded CO band dominates the IRRAS spectra for CO adsorption on the 0.6 nm-thick Pd surface, at which the lattice spacing corresponds to that of Pd(1 1 1). A 90 K-CO exposure to the 0.1 nm-thick Pd surface leads to the IRRAS bands caused not only by CO-Pd but also by CO-Cu, while the Cu-related band is almost absent from the spectra for the 0.3 nm-thick Pd surface. The results clearly reveal that local atomic structures of the outermost bimetallic surface can be discussed by the IRRAS spectra for the probe molecule.     

K-induced surface structural change of Si(1 1 1)-7 × 7 probed by second-harmonic generation

The growth of thin K films on Si(1 1 1)-7 × 7 has been investigated by selecting the input and output polarizations of second-harmonic generation (SHG) at room temperature (RT) and at an elevated temperature of 350 °C. The SH intensity at 350 °C showed a monotonic increase with K coverages up to a saturated level, where low energy electron diffraction (LEED) showed a 3 × 1 reconstructed structure. The additional deposition onto the K-saturated surface at 350 °C showed only a marginal change in the SH intensity. These variations are different from the multi-component variations up to 1 ML and orders of magnitude increase due to excitation of plasmons in the multilayers at RT. The variations of SHG during desorption of K at 350 °C showed a two-step decay with a marked shoulder which most likely corresponds to the saturation K coverage of the Si(1 1 1)-3 × 1-K surface. The dominant tensor elements contributing to SHG are also identified for each surface.     

Stability of MgO(1 1 1) films grown on 6H-SiC(0 0 0 1) by molecular beam epitaxy for two-step integration of functional oxides

Crystalline magnesium oxide (MgO) (1 1 1), 20 Å thick, was grown by molecular beam epitaxy (MBE) on hydrogen cleaned hexagonal silicon carbide (6H-SiC). The films were further heated to 740 °C and 650 °C under different oxygen environments in order to simulate processing conditions for subsequent functional oxide growth. The purpose of this study was to determine the effectiveness and stability of crystalline MgO films and the MgO/6H-SiC interface for subsequent heteroepitaxial deposition of multi-component, functional oxides by MBE or pulsed laser deposition processes. The stability of the MgO films and the MgO/6H-SiC interface was found to be dependent on substrate temperature and the presence of atomic oxygen. The MgO films and the MgO/6H-SiC interface are stable at temperatures up to 740 °C at 1.0 × 10⁻⁹ Torr for extended periods of time. While at temperatures below 400 °C exposure to the presence of active oxygen for extended periods of time has negligible impact, exposure to the presence of active oxygen for more than 5 min at 650 °C will degrade the MgO/6H-SiC interface. Concurrent etching and interface breakdown mechanisms are hypothesized to explain the observed effects. Further, barium titanate was deposited by MBE on bare 6H-SiC(0 0 0 1) and MgO(1 1 1)/6H-SiC(0 0 0 1) in order to evaluate the effectiveness of the MgO as a heteroepitaxial template layer for perovskite ferroelectrics.     

Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

Low-frequency noise and inelastic tunneling spectroscopy in Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current–voltage (IV) characteristics and low-frequency noise in epitaxially grown Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) magnetic tunnel junctions (MTJs) with dimensions from 2×2 to 20×20 μm². The evaluated MgO energy barrier (0.50±0.08 eV), the barrier width (13.1±0.5 Å) as well as the resistance times area product (7±1 MΩ μm²) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. At low temperatures (T<10 K) inelastic electron tunneling spectroscopy (IETS) shows anomalies related to phonons (symmetric structures below 100 meV) and asymmetric features above 200 meV. We explain the asymmetric features in IETS as due to generation of electron standing waves in one of the Fe electrodes. The noise power, though exhibiting a large variation, was observed to be roughly anti-correlated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behavior could be related to the influence of magnetostriction on the characteristics of the insulating barrier through changes in local barrier defects structure.     

Monolayer adsorption of water on NaCl(1 0 0)

Density functional theory calculations have been applied to investigate the adsorption geometry of water overlayers on the NaCl(1 0 0) surface in the monolayer regime. Competition between H-H intermolecular repulsion and the attraction of the polar molecules to the surface ions results in the most stable structure having a 2 × 1 adsorption symmetry with an adsorption energy of 415 meV. Overlayers of 1 × 1 symmetry, as observed in experiment, have slightly lower adsorption energies. The layers are also unstable with respect to rotation of individual molecules. Multiple hydrogens/oxygens interacting with a single substrate ion can pull that ion out of the surface, although the examples considered are energetically very unfavourable. Overlayers of 1 × 1 symmetry with a coverage of one water molecule per NaCl do not have a high enough adsorption energy to wet the surface.     

Growth and characterization of thin PTCDA films on 3C-SiC(0 0 1)c(2 × 2)

The growth of thin 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDA) films on a 3C-SiC(0 0 1)c(2 × 2) substrate has been studied by means of photoelectron spectroscopy (PES) and atomic force microscopy (AFM). In the first monolayer the molecules interact with the substrate mainly through the O atoms in the end groups of the molecule. The O atoms have a higher binding energy in the first molecular layer compared to the following layers. No chemical shifts are observed in the Si 2p spectra or in the C 1s spectra from the perylene core of the molecules. From the VB spectra and LEED pattern we conclude that the substrate remains in the c(2 × 2) reconstruction after PTCDA deposition. For thicker films a Stranski-Krastanov film growth was observed with flat lying molecules relative to the substrate.     

Self-assembly of 2,6-dimethylpyridine on Cu(1 1 0) directed by weak hydrogen bonding

Sequential stages of formation of a self-assembled monolayer of flat-lying 2,6-dimethylpyridine molecules on a single crystal Cu(1 1 0) surface have been observed by low-temperature scanning tunneling microscopy (LT-STM). At an adsorption temperature of 10 K, all of the molecules are randomly distributed at low coverage upon adsorption. The isolated molecules align their molecular axes parallel to the 〈0 0 1〉 azimuth of the Cu lattice. The nitrogen atom in the molecule is located at the four-fold hollow site. Upon annealing to 100 K, the molecules associate to form head-to-head dimers. The dimer units involve a pair of weak hydrogen bonds between methyl group-hydrogen atoms and N moieties on adjacent molecules, forming a core structure for further growth. In a later stage of self-assembly, single head-to-tail weak hydrogen bonds between ring C-H bonds and N moieties form in chains on the periphery of the central cores, leading to larger domains with a c(6 × 2) overlayer structure.     

Electronic and geometric structure of methyl oxirane adsorbed on Si(1 0 0)2 × 1

Electronic and geometric properties of the adsorbate-substrate complex formed upon adsorption of methyl oxirane on Si(1 0 0)2 × 1 at room temperature is reported, obtained with synchrotron radiation-induced valence and core-level photoemission. A ring-opening reaction is demonstrated to occur, followed by a five-membered ring formation involving two of the Si surface atoms bound to a surface dimer. Core-level photoemission spectra support the ring-opening reaction and the SiO and SiC bond formation, while from the valence spectra a more extended molecular fragmentation can be ruled out. We discuss the most likely geometry of the five-membered ring.     

Comparing the chemical properties of evaporated and sputtered niobium films on oxidized Si(1 0 0) wafers - preparation of oxynitride films

Five hundred nanometers of niobium films have been deposited on silicon(1 0 0) wafers with 100 or 300 nm thermally grown oxide by electron beam evaporation and DC magnetron sputtering. SEM and AFM investigations revealed smaller crystallites and rougher surfaces for the evaporated films. The differences in film morphology resulted in lower reflection intensities in XRD for the as-deposited evaporated films. In order to investigate the influence of the structural properties on their chemical reactivities, in a first set of experiments the films were nitrided with molecular nitrogen by rapid thermal processing (RTP) at varying temperatures. In another set of experiments after nitridation in nitrogen at 1000 °C an oxidation step in molecular oxygen at varying temperatures followed. The films showed different reactivities, leading to different rates of nitridation and oxidation. Sputtered films were less reactive than the evaporated films, deduced from the sequence of reaction products dependent on reaction temperature. XRD data indicated that oxynitrides have formed. Elemental depth profiles were measured by secondary ion mass spectrometry (SIMS).     

One-dimensional atomic and electronic structures of submonolayer potassium deposited on stepped Ni(7 5 5) surface

We deposited 0.01-0.16 ML (monolayer) of potassium on stepped (7 5 5) [=6(1 1 1) × (1 0 0)] surface of nickel in order to fabricate and to understand the growth process of one-dimensional (1D) potassium atomic-chain structure by observing the low-energy-electron-diffraction (LEED) patterns. The LEED patterns from potassium adsorbates exhibit a distinct coverage dependence that 1× streaks first appeared at low coverages up to 0.04 ML and later 2× streaks appeared at around 0.09 ML. The streaks become spotty at the higher coverage. We explained these coverage-dependent changes in LEED patterns in a thorough comparison with kinematically calculated LEED patterns constructing a reasonable growth model.