基于自适应加权约束最小二乘法的麦克风阵列稳健频率不变波束形成算法

为了解决麦克风阵列通道失配时波束形成算法的稳健性问题, 提出一种基于自适应加权约束最小二乘法的麦克风阵列稳健频率不变波束形成算法. 该算法在分析无通道失配和通道失配时阵列模型特点基础上, 深入研究了通道失配时约束最小二乘频率不变波束形成算法存在的问题及其产生的原因; 将麦克风特性的概率密度函数作为稳健因子加入到约束最小二乘频率不变波束形成算法后, 其频率不变性的稳健性得到了一定的提高, 但稳健性仍较差. 为了进一步提高约束最小二乘法频率不变波束形成算法的稳键性, 通过定义代价函数中控制频率不变性的动态加权系数来调节旁瓣频谱能量, 大大提高了频率不变波束形成算法的稳键性, 将频率不变的频带范围内同一到达角度上不同频率所形成的阵列响应的最大值与最小值之比定义为波动误差, 并作为比较本文算法与约束最小二乘稳健波束形成算法和minmax稳健波束形成算法在通道失配时频率不变性稳键性的评价指标. 算法实例验证结果表明, 在麦克风阵列通道失配时, 本文算法的波动误差最小、频率不变波束形成稳健性最好, 而且适用于任意结构的阵列.     

圆柱阵子阵分级处理的稳健超指向性波束形成方法

提出了圆柱阵子阵分级处理的稳健超指向性波束形成方法。首先建立了圆柱阵分两级子阵进行波束形成的信号模型,接着利用空间均匀噪声场中噪声互谱矩阵的循环特性得到基于特征波束分解与综合模型的圆柱阵超指向性的最优解,然后仿真研究了其误差敏感度函数、阵增益和波束图等性能指标,并与圆柱阵的传统全局处理方法进行了对比。提出的分两级子阵处理的超指向性方法与传统全局处理方法相比不仅降低了数据存储量和波束形成计算量,而且进一步提升了稳健性,并且在低频段的阵增益远远高于常规波束形成的值,对水下声呐阵列的设计具有一定的参考价值。      

基于期望响应内插技术的宽带波束优化设计

在以往窄带波束优化设计研究工作的基础上,提出了一种基于期望响应内插技术的宽带波束优化设计方法,目的在于避免宽带问题中由于频带划分过细带来的过重的设计负担,并使之可应用于稳健波束优化设计当中。该方法首先在设计频段内选取几个频率点,在每个频率点上设计得到相应的窄带波束优化权系数,并且根据每个阵元在不同频率点上的权系数构造一个宽带期望响应函数;然后用基于期望响应内插的FIR滤波器设计方法设计合适的FIR滤波器组,以使整个频段上的宽带波束优化得以实现。采用这种方法可以避免宽带波束优化设计中繁重的设计负担,并且在对实际声呐基阵进行宽带波束优化设计时只需少数几个频率点的测量值即可获得好的效果。仿真设计结果和实验研究表明了本文方法的有效性。     

任意结构阵列宽带恒定束宽波束形成新方法

提出了一种任意结构阵列宽带恒定束宽波束形成的新方法．该方法把任意结构阵列的响应向量表示成以Ｂｅｓｓｅｌ函数为核函数的级数之和,并将高阶项截断,然后把频带内各个频率点上的阵列响应向量转化到参考频率上,从而得到恒定束宽波束形成向量,使得各个频率上的波束和参考波束相同．同时,本文还给出了一种基于自适应处理的参考波束优化方法．结合均匀分布离散国阵所作的计算机仿真验证了本文所提方法的有效性．     

基于干扰协方差矩阵重构的恒定束宽鲁棒自适应波束形成

针对宽带波束形成中的恒定束宽波束响应优化设计问题与鲁棒性问题展开研究。首先,提出一种基于相位补偿的恒定束宽全局优化设计方法,通过对阵列流形向量进行相位补偿来设计恒定束宽波束,与现有的一些方法相比,该方法不仅能获得全局最优解,而且物理实现简单。同时,还提出一种基于协方差矩阵重构的鲁棒自适应宽带波束形成算法。该算法采用Capon估计器估计样本数据的空间一频率谱密度函数,然后对期望信号波达方向之外的角度区间进行积分来重构干扰加噪声协方差矩阵,最后利用重构的协方差矩阵设计自适应波束形成器权系数。该波束形成器设计问题被表述成凸优化问题求解。仿真结果表明,在整个输入信噪比范围内,该算法几乎都能获得接近理想值的输出信干噪比。      

刚性圆柱体上圆阵波束形成性能分析

以环绕在刚性圆柱体上的均匀圆阵为阵列模型,分析了刚性圆柱体对圆阵响应的影响,在声场分解所得到的相位模式空间,推导了相位模式波束形成阵列和延迟求和波束形成阵列的白噪声增益和指向性指数的定量表达式,分析了它们在不同频率段的变化规律。在存在和不存在刚性圆柱体两种情况下,对两种阵列性能进行了对比分析。研究了圆阵与圆柱体之间存在间隙时对阵列接收信号及阵列性能的影响。仿真结果表明,在两种情况下相位模式波束形成处理都具有频率不变的指向性,但在低频段牺牲了阵列的鲁棒性;延迟求和波束形成处理在整个频率段具有较好的鲁棒性,但随频率的降低其波束指向性下降,直至变成各向同性阵列。存在刚性圆柱体时,两种阵列鲁棒性均有了一定的提高,前者的指向性不变,而后者的指向性得到了提高。圆阵与圆柱体之间的间隙会降低阵列在高频段的鲁棒性。      

基于干扰协方差矩阵重构的恒定束宽鲁棒自适应波束形成

针对宽带波束形成中的恒定束宽波束响应优化设计问题与鲁棒性问题展开研究。首先,提出一种基于相位补偿的恒定束宽全局优化设计方法,通过对阵列流形向量进行相位补偿来设计恒定束宽波束,与现有的一些方法相比,该方法不仅能获得全局最优解,而且物理实现简单。同时,还提出一种基于协方差矩阵重构的鲁棒自适应宽带波束形成算法。该算法采用Capon估计器估计样本数据的空间一频率谱密度函数,然后对期望信号波达方向之外的角度区间进行积分来重构干扰加噪声协方差矩阵,最后利用重构的协方差矩阵设计自适应波束形成器权系数。该波束形成器设计问题被表述成凸优化问题求解。仿真结果表明,在整个输入信噪比范围内,该算法几乎都能获得接近理想值的输出信干噪比。     

时域实现结构球面阵的最差性能优化稳健宽带波束形成器设计

针对球面阵模态域波束形成器对传声器失配误差敏感的问题,研究了时域实现结构球面阵的最差性能优化稳健宽带波束形成器设计。揭示了波束响应误差上界的保守性是影响现有最差性能优化方法性能的主要原因,进而提出了一种波束响应误差上界更为紧凑的优化设计方法。理论分析表明,与现有最差性能优化方法相比,所提出方法的代价函数更小、且可行解的范围也更大。针对最差性能优化设计方法存在的波束指向上阵列响应随频率变化波动偏大而引起信号失真的问题,还给出了一种减小波束图在指向方向上受信号频率影响的约束方法。仿真分析结果表明:在相同传声器失配误差条件下,所提出的设计方法要优于现有方法,得到的波束图具有更低的旁瓣级。      

阵列指向性二次型约束稳健波束形成算法

提出了一种基于阵列指向性二次型约束的优化算法,以提高最小方差无畸变响应(MVDR)波束形成对方向矢量的稳健性。通过控制阵列波束指向附近的小区域的自适应波束图与期望波束图的加权平方误差,使波束主瓣区域内的信号畸变最小,同时保持了对约束区间外的干扰信号的抑制能力。数值结果表明:在理想阵形和阵形畸变情况下,无方位失配时,利用本文算法的阵列输出信号与干扰噪声比(SINR)与新近出现的球面约束稳健Capon方法相当,而存在方位失配时,本文算法均优于后者。     

紧凑型双单元声系统的波束形成研究

紧凑型扬声器系统的空间感增强是目前便携式移动电声设备面临的一个重要难题。该文基于拓宽视在声源宽度以增强空间感的理念,进行了紧凑型扬声器系统的波束形成研究。该文基于圆柱形刚性障板的声学特性,利用两只扬声器单元设计了紧凑型双单元声系统,分别利用基于相位对齐的最小均方误差算法实现左/右声道的波束形成和利用最小均方误差算法并设计半空间指向性的目标实现虚拟中央声道的波束形成。通过分析波束宽度和扬声器单元的工作状态验证了波束形成效果符合目标设计。考虑到实际使用情况,一方面,该文利用边界元方法仿真分析了有限长障板对扬声器单元指向性以及波束形成的影响,仿真结果表明有限长障板会使得单元整体的指向性变宽,该结果更有利于声系统实现目标;另一方面,该文基于有限元仿真的条件实际设计了双单元声系统,通过实验测量进一步验证了算法的性能。     

Frequency-invariant robust adaptive beamforming based on interference covariance matrix reconstruction

Consider the problems of frequency-invariant beampattern optimization and robustness in broadband beamforming.Firstly,a global optimization algorithm,which is based on phase compensation of the array manifolds,is used to construct the frequency-invariant beampattern.Compared with some methods presented recently,the proposed algorithm is not only available to get the global optimal solution,but also simple for physical realization.Meanwhile,a robust adaptive broadband beamforming algorithm is also derived by reconstructing the covariance matrix.The essence of the proposed algorithm is to estimate the space-frequency spectrum using Capon estimator firstly,then integrate over a region separated from the desired signal direction to reconstruct the interference-plus-noise covariance matrix,and finally caleulate the adaptive beamformer weights with the reconstructed matrix.The design of beamformer is formulated as a convex optimization problem to be solved.Simulation results show that the performance of the proposed algorithm is almost always close to the optimal value across a wide range of signal to noise ratios.     

Nearfield broadband array design using a radially invariant modal expansion

This paper introduces an efficient parameterization for the nearfield broadband beamforming problem with a single parameter to focus the beamformer to a desired operating radius and another set of parameters to control the actual broadband beampattern shape. The parameterization is based on an orthogonal basis set of elementary beampatterns by which an arbitrary beampattern can be constructed. A set of elementary beamformers are then designed for each elementary beampattern and the desired beamformer is constructed by summing the elementary beamformers with frequency and source-array distance dependent weights. An important consequence of our result is that the beamformer can be factored into three levels of filtering: (i) beampattern independent elementary beamformers; (ii) beampattern shape dependent filters; and (iii) radial focusing filters where a single parameter can be adjusted to focus the array to a desired radial distance from the array origin. As an illustration the method is applied to the problem of producing a practical array design that achieves a frequency invariant beampattern over the frequency range of 1:10 (which is suitable for speech acquisition using a microphone array), and with the array focused either to farfield or nearfield where at the lowest frequency the radial distance to the source is only three wavelengths.     

球谐域类正则化宽带超指向性波束形成算法

提出一种球谐域类正则化宽带超指向性波束形成算法,通过结合超指向性波束形成器与延迟求和波束形成器控制阵列白噪声增益和指向性因数,推导类正则化宽带超指向性波束形器的球谐域表达式。在此基础上设计新的可控指向性因数波束形成器,可在不显著放大低频白噪声的前提下实现设定的波束宽度。采用32元球阵的仿真结果表明,对于语音测试场景,类正则化波束形成器的最高PESQ得分相比于传统的超指向性波束形成器与延迟求和波束形成器分别提高了约0.5和0.4,平均词错率分别减少了约9.5%和8.1%。主观测试实验也表明类正则化波束形成器在方向性噪声和扩散场噪声环境下都可以获得更好的主观听觉感受。利用实验数据对算法性能进行测试,实验结果同样验证了该方法在实际声学环境中的有效性。      

一种基于模式搜索算法的基阵波束优化方法

波束形成在声纳/雷达信号处理中占有重要的地位,而设计出满足要求的波束形状是声纳/雷达信号空间处理的重要内容。自适应波束形成算法理论上可以获得最优的工作性能,但其计算复杂度高、宽容性差等缺点严重地限制了这些算法的实际应用。本文采用基于模式搜索的波束优化算法,获得了与实际接收数据无关的、类似于窗函数的幅度权系数。与加窗波束形成算法相比,这种方法可以在保证主瓣宽度不展宽的情况下,有效降低旁瓣级,并且,这种方法对基阵的几何形状没有任何限制。     

Improving beampatterns of two-dimensional random arrays using convex optimization

Sensors are becoming ubiquitous and can be combined in arrays for source localization purposes. If classical conventional beamforming is used, then random arrays have poor beampatterns. By pre-computing sensor weights, these beampatterns can be improved significantly. The problem is formulated in the frequency domain as a desired look direction, a frequency-independent transition region, and the power minimized in a rejection-region. Using this formulation, the frequency-dependent sensor weights can be obtained using convex optimization. Since the weights are data independent they can be pre-computed, the beamforming has similar computational complexity as conventional beamforming. The approach is demonstrated for real 2D arrays.     

Maximization of the directivity ratio with the desired audible gain level for broadband design of near field loudspeaker arrays

This paper mainly addresses design methods for near field loudspeaker arrays. These methods have been studied recently since they can be used to realize a personal audio space without the use of headphones. From a practical view point, they can also be used to form a directional sound beam within a short distance from the sources especially using a linear loudspeaker array. In this regard, we re-analyzed the previous near field beamforming methods in order to obtain a comprehensive near field beamforming formulation. Broadband directivity control is proposed for multi-objective optimization, which maximizes the directivity with the desired gain, where both the directivity and the gain are commonly used array performance measures. This method of control aims to form a directive sound beam within a short distance while widening the frequency range of the beamforming. Simulation and experimental results demonstrate that broadband directivity control achieves higher directivity and gain over our whole frequency range of interest compared with previous beamforming methods.     

球体表面圆环阵模态域稳健高增益波束形成方法研究

通过对考虑障板影响下噪声互谱矩阵的精确求解,给出了一种计算刚性球体表面圆环阵阵增益的模型,并在此基础上提出了一种模态域二阶锥规划稳健高增益波束形成方法。该方法根据相位模态波束形成理论,将阵元域稳健加权向量转换为模态域的稳健模态系数,从而设计出不同模态阶数下的稳健高增益波束。由于采用了白噪声增益约束以及低频段较低的模态阶数,该方法提高了超增益波束形成器的稳健性。仿真结果表明该方法能够提供更多的稳健波束形成的方案,在多个关联的波束性能指标之间获得比常规方法和阵元域稳健性方法更合理的折衷。      

Analysis and calibration of system errors in steerable parametric loudspeakers

By adjusting a set of delay amounts and amplitudes of the ultrasonic transducer (primary source) array in parametric loudspeakers, the directional sound beam can be steered within a range of predefined angles. This beamsteering characteristic of parametric loudspeakers has been proposed in theory and validated by measurements. In particular, the locations of the mainlobe and grating lobes can be predicted within a certain degree of accuracy in theory. However, errors incur in different stages of implementation. Thus, mismatches are observed between theoretical and measured beampatterns. In this paper, four types of system errors are analyzed for the primary-frequency waves and the difference-frequency waves based on the phased array theory and the product directivity principle, respectively. The degraded beampatterns which are caused by system errors are analyzed and calibrated by using a combined optimization approach of Monte Carlo method and nonlinear least squares method. Experimental results are presented to show the advantage of the proposed calibration method that leads to significant reduction of mismatch between theoretical and measured beampatterns at both the primary frequency and the difference frequency.