毛刺状竹节结构氮化硼纳米管的合成与生长机理

以非晶硼和氧化镍纳米颗粒为原料,在氨气中1100 oC下合成了毛刺状竹节结构的氮化硼纳米管. 利用X射线衍射和透射电镜研究了氮化硼纳米管的结构和形貌. 竹节结构纳米管表面的毛刺是六方氮化硼的纳米薄片. 提出了一种基于固态硼和气态二氧化硼扩散的毛刺形貌生长机理.     

氮化硼纳米管阵列储氢的计算机模拟

采用巨正则蒙特卡罗方法模拟常温、中等压强下单壁氮化硼纳米管阵列的物理吸附储氢,重点研究压强、纳米管阵列的管径和管间距对单壁氮化硼纳米管阵列物理吸附储氢的影响.计算结果表明,氮化硼纳米管阵列的储氢性能明显优于碳纳米管阵列,在常温和中等压强下的物理吸附储氢量(质量百分数)可以达到和超过美国能源部提出的商业标准.并给出相应的理论解释.     

铬,银掺杂和铬氧共掺杂n型,p型氮化硼纳米管第一性原理研究

基于第一性原理的平面波超软赝势法对(6, 0)单壁氮化硼纳米管、Cr掺杂、Ag掺杂、以及Cr-O共掺纳米管进行电子结构和光学性质的计算.结果表明:Cr掺杂和Cr-O共掺体系相比于本征体系的带隙值均减小,掺杂体系的导带底穿过费米能级从而实现了氮化硼纳米管的n型掺杂. Ag掺杂实现了纳米管的p型掺杂.本征氮化硼纳米管、Ag掺杂、Cr掺杂、以及Cr-O共掺纳米管的静态介电常数分别为1.17、1.61、1.32和1.48,相对于本征体系静介电性能有所提高.     

单壁氮化硼纳米管的结构、对称性和晶格动力学

本文分析了氮化硼纳米管的结构对称性,并对其晶格振动模的对称性进行了分类。计算了单壁氮化硼纳米管的声子色散关系,给出了扶手椅管和锯齿管拉曼和红外活性模的频率随管径的变化规律。     

氮化硼、碳化硅、锗纳米管的熔化与拉伸力学特性

该论文采用Tersoff势的分子动力学方法分析了单壁(5,5)氮化硼、碳化硅、锗纳米管的熔化与轴向拉伸力学特性,讨论了三种纳米管熔化与轴向拉伸力学性能的差异.研究表明:氮化硼管熔化后呈现为网状,碳化硅管为疏松的不规则的团状,锗管呈现为紧密排布的近似球状;相同温度下,碳化硅及氮化硼纳米管的熔点、比热容以及熔化热却均远高于锗管,但系统能量却远低于锗管;三种纳米管中,氮化硼管的抗变形抗能力最大,锗管的抗变形与抗载荷能力最小,而氮化硼、碳化硅管的抗载荷能力相当.     

单壁氮化硼纳米管压缩特性的分子动力学模拟

采用分子动力学方法,分别模拟完好的和含有缺陷的(7,7)扶手椅型氮化硼纳米管的轴向压缩过程.原子间的相互作用采用Tersoff多体势函数来描述.为验证结果的可靠性,同时针对(7,7)扶手椅型碳纳米管进行对比计算.结果表明,氮化硼纳米管的压缩失效模式同碳纳米管相同,均表现为管壁的局部屈曲.发现纳米管的压缩强度,如临界轴向内力在低温下受温度影响明显,并且和应变率的大小有关.然而,应变率对纳米管的弹性变形没有影响.另外,还发现空位缺陷降低了纳米管的力学性能.与完好的纳米管相比,含有缺陷的纳米管轴向压缩强度对于温度的影响并不敏感.     

BN管状团簇到单壁纳米管的几何结构和电子性质

利用密度泛函理论(DFT),对氮化硼(BN)管状团簇的几何结构、稳定性和电子性质进行了研究.选取合适的BN结构单元作为结构生长基元,采用逐层生长的方式计算得到有限长度、不同截面尺寸的稳定管状团簇.结构中B-N交替排列,结构组成中的四元环和六元环数目均符合一般表达式.计算结果表明,通过适当组装管状团簇以及碳原子掺杂,可以制备出带隙可调的单壁氮化硼纳米管.     

高压对氮化硼纳米管的几何结构、电子结构和光学性质的影响

运用密度泛函理论平面波赝势方法(PWP)和广义梯度近似(GGA),计算研究了纳米管BN(5,5)在不同压力条件下的几何结构、电子结构和光学性质. 在高压条件下管口形状发生了较大的变化. 与闪锌矿结构BN比较分析发现两种结构间存在一些性质上的差异：首先,在外压力作用下,BN(5,5)纳米管的带隙随压力增大而减小,变化率为-0.01795eV/GPa,而闪锌矿结构BN随压力增大而增大;其次光吸收谱在压力条件下,没有和闪锌矿结构BN一样发生“蓝移”,相反在红外方向有所拓展;但纳米管BN(5,5)电子的转移方向和 关键词： 氮化硼纳米管 密度泛函理论(DFT) 电子结构     

铬银氧共掺n型，p型特性氮化硼纳米管第一性原理研究

基于第一性原理的平面波超软赝势法对(6, 0)单壁氮化硼纳米管、Cr掺杂、Ag掺杂、以及Cr-O共掺纳米管进行电子结构和光学性质的计算。结果表明：Cr掺杂和Cr-O共掺体系相比于本征体系的带隙值均减小,掺杂体系的导带底穿过费米能级从而实现了氮化硼纳米管的n型掺杂。Ag掺杂实现了纳米管的p型掺杂。本征氮化硼纳米管、Ag掺杂、Cr掺杂、以及Cr-O共掺纳米管的静态介电常数分别为1.17、1.61、1.32和1.48,相对于本征体系静介电性能有所提高。     

氮化硼、碳化硅、锗纳米管的熔化与拉伸力学特性

该论文采用Tersoff势的分子动力学方法分析了单壁(5,5)氮化硼、碳化硅、锗纳米管的熔化与轴向拉伸力学特性,讨论了三种纳米管熔化与轴向拉伸力学性能的差异。 研究表明：氮化硼管熔化后呈现为网状,碳化硅管为疏松的不规则的团状, 锗管呈现为紧密排布的近似球状;相同温度下,碳化硅及氮化硼纳米管的熔点、比热容以及熔化热却均远高于锗管,但系统能量却远低于锗管;三种纳米管中,氮化硼管的抗变形抗能力最大,锗管的抗变形与抗载荷能力最小,而氮化硼、碳化硅管的抗载荷能力相当。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.