Optimization of transverse electric peak-type metal-clad waveguide sensor using double-negative materials

In a very recent work, a transverse electric peak-type metal-clad waveguide optical sensor was proposed in which a double-negative material (DNM) was used as a guiding layer. The sensor was found to exhibit a considerable angular shift of the reflectance peak for small changes in the refractive index of the analyte, due to the DNM layer. In this work, the optimization of the structure parameters is investigated to find out the most appropriate metal and its optimal thickness. Moreover, the optimal DNM layer parameters corresponding to the highest sensitivity are explored. Our calculations reveal that metals with high absolute value of the real part of the permittivity correspond to sharper peaks. Moreover, as the absolute value of the real part of both ε and μ of the DNM increases, the reflectance peak becomes sharper and the dip following the peak becomes deeper.     

Effect of an optical negative index thin film on optical bistability

We investigate nonlinear transmission in a layered structure consisting of a slab of positive index material with Kerr-type nonlinearity and a subwavelength layer of linear negative index material (NIM) sandwiched between semi-infinite linear dielectrics. We find that a thin layer of NIM leads to significant changes in the hysteresis width when the nonlinear slab is illuminated at an angle near that of total internal reflection. Unidirectional diodelike transmission with enhanced operational range is demonstrated. These results may be useful for NIMs characterization and for designing novel NIMs-based devices.     

含单负材料三明治结构的电磁隧穿特性

在理论分析的基础上,结合实验研究了单负材料/正折射率材料(或单负材料)/单负材料三明治结构的电磁隧穿性质.这种结构的电磁隧穿来源于入射平面波与结构的表面或体极化激元的耦合,从理论上讨论并计算了正入射情况下这种结构中的极化激元的色散关系.发现:由单负材料作为边界而正折射率材料为中间层的三明治结构具有体极化激元,这种极化激元的共振频率随着中间层厚度的增加向低频移动;由不同性质的单负材料构成的三明治结构具有两条色散曲线,这两条色散曲线随着中间层厚度的增加而简并.随后基于L-C传输线技 关键词： 单负材料 极化激元 隧穿 L-C传输线')" href="#">L-C传输线     

Ternary photonic crystal with left-handed material layer for refractometric application

A ternary photonic crystal with left-handed material (LHM) layer is examined for refractometric applications. One of the layers is assumed to be air and treated as an analyte. The transmittance from the ternary photonic crystal is studied in details and the wavelength shift due to the change in the refractive index of the analyte is investigated. The transmittance is investigated with the parameters of the LHM. It is found that the wavelength shift can be significantly enhanced with the decrease of both real part of the LHM permittivity and thickness.     

Defect modes properties in periodic lossy multilayer containing negative index materials with symmetric and asymmetric geometric structures

In this paper, the characteristic matrix method is used to study the propagation of electromagnetic waves through one-dimensional lossy photonic crystals composed of negative and positive refractive index material layers with symmetric and asymmetric geometric structures with a defect layer at the center of the structure. First, the positive index material defect layer is considered, and the effects of the polarization and the angle of incidence on the defect mode in the transmission spectra of the both structures are investigated. The results show that the number of the defect modes in the transmission spectra depends on the geometry (symmetric or asymmetric) of the structure. In addition, it is shown that the defect mode frequency increases as the angle of incidence increases. This property is independent of the geometry of the structure. Then, for normal incidence, the negative index material defect layer is considered, and the properties of defect modes for both structures are investigated. The results can lead to designing new types of transmission narrow filters.     

光子晶体多通道可调谐滤波器的理论研究

为了实现光子晶体的多通道滤波,对设计出的一维掺杂光子晶体进行了数值计算和理论分析。结果表明：多通道透射峰的波长与空气膜厚度呈线性变化,不同厚度的空气膜可以截到数目不同的透射峰,多通道透射峰的半高宽随光子晶体折射率n₂的增加而减小。以此为基础,设计出滤波通道波长的可调范围达60nm,滤波通道半高宽的可调范围为1nm～5nm,滤波通道透射峰值大于0.98的一维光子晶体三通道可调谐滤波器。     

Resonant tunneling of a wave through a structure that contains a layer with a negative refractive index

We have investigated the transmission ability of a layered structure the central layer of which is made of a “left-handed” material (its refractive index is negative) and is separated by two air slabs from a “right-handed” dielectric medium that surrounds the structure. We consider tunneling of energy fluxes through the structure and determine conditions for the complete (reflectionless) transmission of the power of the incident wave through it. We show that this effect is resonant and is observed when the tangential component of the wave vector of the incident wave coincides with the longitudinal wave vector of one of waveguiding eigenmodes of the left-handed layer.     

Photonic crystal microcavity as a highly sensitive platform for RI detection

In this paper, we propose a new design principle of two-dimensional photonic crystal refractive index sensors with high transmission and sensitivity simultaneously. The proposed sensor is made of two waveguide couplers and one microcavity which is obtained by varying the radius of one air hole in the center of PC structure. The microcavity is separated from the input and output waveguides by many holes of the PC. It is shown that by injecting an analyte such as gas or a liquid into a sensing hole, and thus changing its refractive index, a shift in the resonant wavelength may occur. The transmission spectra, quality factor and sensitivity of the sensor have been analyzed numerically by the finite difference time domain (FDTD) method. The sensitivity value of the sensor has been found to be 668 nm/(RIU with minimum detection limit of 0.002 RIU), which proves the ability of the structure to produce biosensor PhC.     

基于银纳米线的类熊猫型微结构光纤传感器

设计了基于银纳米线等离子体共振效应的大孔径微流通道的类熊猫型微结构光纤传感器,采用全矢量有限元法对该传感器进行了数值研究,讨论了待测液折射率等参数对光纤传感器的损耗和灵敏度的影响。结果表明:随着待测液折射率和银纳米线直径的增大,损耗和光谱峰值λpeak都将增大;并且当银纳米线的直径增加到一定程度时,损耗和灵敏度都会呈现多峰值现象。最后取银纳米线直径d=150 nm,得到最大幅度灵敏度为910 dB/RIU,最大光谱灵敏度为1 400 nm/RIU。     

An Integrative Biosensor Based on Contra-Directional Coupling Two-dimensional Photonic Crystal Waveguides

We propose an integrative biochemical sensor utilizing the dip in the transmission spectrum of a normal singleline defect photonic crystal （PC） waveguide, which has a eontra-directional coupling with another PC waveguide. When the air holes in the PC slab are filled with a liquid analyte with different refractive indices, the dip has a wavelength shift. By detecting the output power variation at a certain fixed wavelength, a sensitivity of 1.2 × 10^-4 is feasible. This structure is easy for integration due to its plane waveguide structure and omissible pump source. In addition, high signal to noise ratio can be expected because signal transmits via a normal single-line defect PC waveguide instead of the PC hole area or analyte.     

两端对称负折射率缺陷复合光子晶体:多通道滤波和光开关

采用传输矩阵法对两端对称负折射率缺陷复合光子晶体结构[D(AB)mD]N的透射特性进行了研究.结果表明:当N=2时,该结构透射谱的禁带出现两个完全共振透射峰,当N增加时,每个共振透射峰又分裂为N-1条；当复合光子晶体的层数m逐渐增加时,透射峰的品质因子逐渐提高,且分裂的共振透射峰距离逐渐减少；既为该结构实现高品质的多通...     

CO2激光写入旋转折变型长周期光纤光栅的制作及理论分析

提出了一种光纤横截面折射率变化呈旋转非对称变化的长周期光纤光栅（R-LPFG） 结构,并利用多层圆波导理论和横截面折射率离散分析方法,结合模式耦合方程组和数值求解方法理论分析了这种光栅的模式耦合特征.理论分析表明R-LPFG纤芯基模主要与一阶非对称包层模发生耦合,当光栅旋转度逐渐变大时,R-LPFG基模会与一阶非对称包层模的奇模和偶模同时发生耦合,这就会使原来单一的谐振峰逐渐分裂成双峰,这是常规光栅类型所不具有的透射谱特征.由于R-LPFG的双峰来自同一对耦合模式,它们对温度的响应很相似,因此可利用双峰间 关键词： 光纤传感 光纤光栅 2激光')" href="#">CO₂激光 旋转折变     

基于光子晶体光纤交叉敏感分离的磁场温度传感研究

提出了一种基于定向耦合效应和表面等离子共振效应的交叉敏感分离的磁场温度传感结构.在光子晶体光纤的一个特定空气孔中填充磁流体,利用磁流体的磁光效应和定向耦合效应形成磁场传感通道;在垂直方向的另一空气孔的内壁镀金纳米薄膜并填充甲苯液体,利用甲苯的温敏效应和表面等离子共振效应形成温度传感通道.对应输出谱出现两个损耗峰,测量损耗峰位置可以间接测出磁场强度和温度变化.通过理论计算()和结构优化,在90—270 Oe1 Oe=10~3/(4π) A/m范围内,磁场强度的灵敏度最高可达1.16 nm/Oe;在25—60?C范围内,温度的灵敏度可达-9.07 nm/?C.虽然填充的两种液体的折射率都受环境温度的影响,但通过建立灵敏度系数矩阵,可以消除磁场强度与温度的交叉敏感,实现磁场温度双参量的高灵敏度检测.     

侧边抛磨的U型金溅射塑料光纤等离子体共振传感器

为了测量溶液折射率变化，对塑料光纤纤芯表面的纤芯-金层-液体的3层膜结构进行研究，制作了一种使用U型结构并结合侧边抛磨方法的表面等离子体共振传感器。将截取的一段塑料光纤弯曲成为U型，并在烘箱中通过较高温度使这段光纤的曲率固定，对弯曲部分的外表面进行抛光，暴露该位置塑料光纤芯层并在其上溅射金纳米薄膜层，将制备好的传感器浸入不同折射率的液体中，使用光谱分析仪观察光谱的移动。实验结果表明:当塑料光纤SPR传感器测量折射率变化范围在1.333~1.406的液体时，可以通过光谱观察到随着液体折射率的增大，等离子体共振吸收峰位置也不断地向波长增大的方向移动，并且二者之间存在线性关系，其灵敏度为7.5×10-4 RIU/nm。该传感器探头具有灵敏度高、小型化、易制备、低成本的特点。     

植入碳纤维蜂窝夹芯结构的光纤光栅热载荷响应光谱研究

针对航天领域复合材料结构在空间服役环境的热响应监测需求,研究了一种热载荷作用下基于光纤Bragg光栅(FBG)反射光谱特征分析的碳纤维蜂窝夹芯结构监测方法。将光纤Bragg光栅传感器分别植入碳纤维蜂窝夹芯结构的不同铺层,通过监测不同热载荷下各铺层位置的光纤光栅反射光谱,得到碳纤维蜂窝夹芯结构相关铺层位置热应变特征。研究表明,碳纤维蜂窝夹芯结构不同材料铺层的热应变特征存在一定差异。植入外蒙皮表面与玻璃布之间的光纤光栅反射光谱随着温度升高,中心波长向长波方向漂移,且波形未出现明显改变。埋植于外蒙皮第二、三层碳纤维织物预浸料之间的光栅反射光谱随着温度降低逐渐出现旁瓣、多峰等啁啾效应,其主峰与右侧次峰中心波长均向短波方向逐渐漂移,主峰峰值幅度变化较小,温度灵敏度约为5.56×10-3 dBm·℃-1,而右侧次峰幅度显著增大,温度灵敏度约为40.32×10-3 dBm·℃-1;埋植于内蒙皮和蜂窝芯子之间的光栅反射光谱随着温度降低,其半波峰带宽逐渐增大,变化率约为3.19 pm·℃-1,且出现显著多峰趋势,这是由于层间热应力分布不均匀所形成。在-70~+60 ℃温度范围,各植入层热应变均随温度升高而增大,且变化趋势相接近,而在+60~+120 ℃温度范围内,各植入层热应变变化趋势呈现显著差异。这些特性能够为后继空间环境复合材料航天器结构状态在轨监测提供有益帮助。     

The extraordinary optical transmission through double-layer gold slit arrays

We present the numerical investigation of the optical transmission through a periodic gold nano-slit structure composed with two non-identical layers, and compare it with that of double-layer structure with two identical layers. The optical enhancement is attributed to the surface Plasmon resonance collaborated with the localized waveguide resonance. It is shown that the transmission behaviors are strongly dependent on the layer separation and lateral displacement between the two single metallic gratings. Especially, it is found that extraordinary transmission exists even if the slit of one layer shifts laterally over that of the other one to the situation that no light can propagate directly when layer separation D = 0. When the slit widths of two layers are not equal, the surface plasmon resonance peak alternately decreases and increases twice, and the localized waveguide resonance peak appears at a longer wavelength as the lateral displacement varies for a non-zero layer separation, which differs from the situation with two identical layers. These transmission properties of the structures show promise for applications in optical devices.     

High sensitivity dual core photonic crystal fiber sensor for simultaneous detection of two samples

The optical control ability of photonic crystal fiber (PCF) is a distinctive property suitable for improving sensing and plasma performance. This article proposes a dual-core D-channel PCF sensor that can detect two samples simultaneously, which effectively solves the problems of coating difficulty and low wavelength sensitivity. The PCF has four layers of air holes, which dramatically reduces the optical fiber loss and is more conducive to the application of sensors in actual production. In addition, by introducing dual cores on the upper and lower sides of the central air hole, reducing the spacing between the core and the gold nanolayer, a stronger evanescent field can be generated in the cladding air hole. The optical fiber sensor can detect the refractive index of two samples simultaneously with a maximum sensitivity of 21300 nm/RIU. To the best of our knowledge, the sensitivity achieved in this work is the highest sensitivity with the dual sample synchronous detection sensors. The detection range of the refraction index is 1.35-1.41, and the resolution of the sensor is 4.695×10^-6. Overall, the sensor will be suitable for medical detection, organic chemical sensing, analyte detection, and other fields.     

基于辅助电介质层的棱镜表面等离子体共振效应研究

研究了一种基于棱镜基底-辅助电介质层-金膜-待测介质四层结构的表面等离子体共振(surface plasmon resonance,SPR)效应激励模型.采用薄膜光学与波导理论,探索了由辅助电介质层与金膜复合而成共振薄膜对SPR效应的激励机理与调制特性.借助时域有限差分方法,数值模拟得到辅助电介质层属性与共振能量传输特性关系.在此基础上,构建了波长调制型棱镜辅助电介质层结构SPR激励系统.研究结果表明,当待测介质折射率相同时,相较基于棱镜基底-金膜-待测介质三层结构的Kretschmann激励模型,辅助电介质层激励模型共振光谱整体向长波方向偏移且半波宽度出现显著展宽效应.而当待测介质折射率增大时,辅助电介质层型激励模型的共振光谱不仅会向长波方向偏移,而且折射率响应灵敏度比棱镜Kretschmann三层激励模型高出75%.因此该模型能够为诸如高灵敏度检测、新型光学滤波与调制器件设计等领域的研究应用提供理论与实践储备.     

On negative refraction in electron optics

Negative refraction is investigated within the context of both relativistic and non-relativistic electron optics. In fact, starting from the de Broglie wave-particle dualism, the negative refractive index as a function of wavelength is determined for both relativistic and non-relativistic electrons. Comparison with photon optics is done. Negative refractive index averaged over both sufficiently small and sufficiently large wavelength ranges is found to be tending to minus unity and minus infinity, respectively. In addition, the sensitivity to wavelength of the negative refractive index is evaluated.     

Inhibition of emission wavelength blueshift in annealed InAs/GaAs quantum dot stacks: an important observation for their potential application in photovoltaic devices

We have investigated the effect of post growth rapid thermal annealing on self-assembled InAs/GaAs multilayer QDs (MQD) overgrown with a combination barrier of InAlGaAs and GaAs for their possible use in photovoltaic device application. The samples were characterized by transmission electron microscopy and photoluminescence measurements. We noticed a thermally induced material interdiffusion between the QDs and the wetting layer in the MQD sample up to a certain annealing temperature. The QD heterostructure exhibited a thermal stability in the emission peak wavelength on annealing up to 700 ^°C temperature. A phenomenological model has been proposed for this stability of the emission peak. The model considers the effect of the strain field, propagating from the underlying QD layer to the upper layers of the multilayer QD and the effect of indium atom gradient in the combination barrier layer due to the presence of a quaternary InAlGaAs layer.