Spherical polyelectrolyte block copolymer micelles: Structural change in presence of monovalent salt

Spherical polyelectrolyte block copolymer micelles were investigated as a function of added NaCl salt concentration using Small-Angle Neutron Scattering (SANS) and Light Scattering (LS). The micelles are formed by the self-association of charged-neutral copolymers made of a long deuterated polyelectrolyte moiety (NaPSS_d)₂₅₁ and a short hydrophobic moiety (PEP)₅₂. In presence of salt, the core shape and the aggregation number of the micelles are not affected. The hydrodynamic radius of the micelle is found to be identical to the radius of the whole micelle deduced from neutron scattering and thus the hydrodynamic radius is a valid measure of the corona thickness. At the lowest salt concentrations investigated the thickness of the corona, R_s, remains essentially constant and a contraction is observed above an added-salt concentration c_s of 2×10^-2 M where this crossover concentration corresponds to the average ionic strength of the free counterions in the corona. The contraction takes place while maintaining a rod-like behavior of the chains at short scale and obeys to: R_s c_s^-0.18. The exponent 0.18 suggests an electrostatic persistence length proportional to the Debye screening length.     

Micelles of poly(isoprene-b-2-vinylpyridine-b-ethylene oxide) terpolymers in aqueous media and their interaction with surfactants

Well-defined poly(isoprene-b-2-vinylpyridine-b-ethylene oxide) (PI-P2VP-PEO) triblock terpolymers were synthesized by anionic polymerization high-vacuum techniques. The terpolymers formed spherical three-layer (onion-type) micelles in neutral and acidic pH aqueous media as evidenced by static and dynamic light scattering. In pure water, kinetically frozen micelles with a core composed of a soft PI inner part and a hard P2VP outer shell and protected by a neutral PEO corona were formed. In acidic media the core was formed by the soft PI hydrophobic segment, whereas the corona consisted of an inner cationic polyelectrolyte P2VPH⁺ part and an outer PEO shell. The aggregation numbers were found to be high in all cases, due to the high hydrophobicity of the core-forming blocks. In the latter case an increase in size was observed due to the electrostatic repulsions between the P2VPH⁺ chains in the inner part of the corona, which is also responsible for the lower aggregation numbers observed in the acidic solutions. The interaction of these onion-type micelles with cationic (DTMAB) and anionic (SDS) surfactants led to the formation of mixed polymer/surfactant aggregates. Their structural characteristics could be varied by combining changes in surfactant type and concentration, solution pH and type of electrostatic interaction, leading to interesting, block-copolymer-based, environmentally responsive colloidal systems.     

Self-assembled pattern formation of block copolymers on the surface of the sphere using self-consistent field theory

The spherical surface is spatially discretized with triangular lattices to numerically calculate the Laplace-Beltrami operator contained in the self-consistent field theory (SCFT) equations using a finite volume method. Based on this method we have developed a spherical alternating-direction implicit (ADI) scheme for the first time to help extend real-space implementation of SCFT in 2D flat space to the surface of the sphere. By using this method, we simulate the equilibrium microphase separation morphology of block copolymers including AB diblocks, ABC linear triblocks and ABC star triblock copolymers occurred on the spherical surface. In general, two classes of microphase separation morphologies such as striped patterns for compositionally symmetric block copolymers and spotted patterns for asymmetric compositions have been found. In contrast to microphase separation morphology in 2D flat space, the geometrical characteristics of a sphere has a large influence on the self-assembled morphology. For striped patterns, several of spiral-form and ring-form patterns are found by changing the ratio of the radius of a sphere to the averaging width of the stripes. The specific pattern such as the striped and spotted pattern with intrinsic dislocations or defects stems from formed periodic patterns due to microphase separation of block copolymers arranged on the curved surface.     

Contrast variation SANS experiments to the study of detergent-induced micellization of block copolymers

PEO—PPO—PEO triblock copolymer P85 [(EO)₂₆(PO)₃₉(EO)₂₆] dissolves as unimers and detergent sodium dodecyl sulfate (SDS) forms micelles in aqueous solution at 20°C. The mixing of detergent with triblock copolymer induces the micellization of triblock copolymers. Contrast variation small-angle neutron scattering measurements show that triblock copolymer forms mixed micelles with detergent and the mixing of two components in the mixed micelles is uniform.     

Structure of colloidal complexes obtained from neutral/poly- electrolyte copolymers and oppositely charged surfactants

We report on the phase behavior and scattering properties of colloidal complexes made from block copolymers and surfactants. The copolymer is poly(sodium acrylate)-b-poly(acrylamide), hereafter abbreviated as PANa-PAM, with molecular weight 5000 g/mol for the first block and 30000 g/mol for the second. In aqueous solutions and neutral pH, poly(sodium acrylate) is a weak polyelectrolyte, whereas poly(acrylamide) is neutral and in good-solvent conditions. The surfactant is dodecyltrimethylammonium bromide (DTAB) and is of opposite charge with respect to the polyelectrolyte block. Combining dynamical light scattering and small-angle neutron scattering, we show that in aqueous solutions PANa-PAM diblocks and DTAB associate into colloidal complexes. For surfactant-to-polymer charge ratios Z lower than a threshold (Z(C) approximately 0.3), the complexes are single surfactant micelles decorated by few copolymers. Above the threshold, the colloidal complexes reveal an original core-shell microstructure. We have found that the core of typical radius 100-200 A is constituted from densely packed surfactant micelles connected by the polyelectrolyte blocks. The outer part of the colloidal complex is a corona and is made from the neutral poly(acrylamide) chains. Typical hydrodynamic sizes for the whole aggregate are around 1000 A. The aggregation numbers expressed in terms of numbers of micelles and copolymers per complex are determined and found to be comprised between 100-400, depending on the charge ratio Z and on the total concentration. We have also shown that the sizes of the complexes depend on the exact procedure of the sample preparation. We propose that the driving mechanism for the complex formation is similar to that involved in the phase separation of homopolyelectrolyte/surfactant systems. With copolymers, the presence of the neutral blocks prevents the macroscopic phase separation from occurring.     

Stimuli-responsive poly(ethylene oxide)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) triblock copolymers and complexation with poly(acrylic acid) at low pH

The self-organization of the double hydrophilic triblock copolymer poly(ethylene oxide)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide), PEO-b-P2VP-b-PEO, was investigated in dilute aqueous solution under several experimental conditions using turbidimetry, as well as static and dynamic light scattering. As a result of the temperature-sensitive properties of the end PEO blocks and the p H-responsive properties of the middle P2VP block, the formation of large star-like micellar nanostructures is observed at high p H, while at low p H, but in the presence of salt and at high temperature, flower-like micelles are formed. Moreover, the viscosimetric and dynamic light scattering studies at low p H revealed that micelle-like nanostructures are formed upon mixing the triblock copolymer with poly(acrylic acid), PAA, due to hydrogen bonding interpolymer complexation.     

Small angle neutron scattering study of doxorubicin-surfactant complexes encapsulated in block copolymer micelles

Self-assembling behaviour of block copolymers and their ability to evade the immune system through polyethylene oxide stealth makes it an attractive candidate for drug encapsulation. Micelles formed by polyethylene oxide-polypropylene oxide- polyethylene oxide triblock copolymers (PEO-PPO-PEO), pluronic P123, have been employed for encapsulating the anti-cancer drug doxorubicin hydrochloride. The binding affinity of doxorubicin within the micelle carrier is enhanced through complex formation of drug and anionic surfactant, aerosol OT (AOT). Electrostatic binding of doxorubicin with negatively charged surfactants leads to the formation of hydrophobic drug-surfactant complexes. Surfactant-induced partitioning of the anti-cancer drug into nonpolar solvents such as chloroform is investigated. SANS measurements were performed on pluronic P123 micelles in the presence of drug-surfactant complex. No significant changes in the structure of the micelles are observed upon drug encapsulation. This demonstrates that surfactant- drug complexes can be encapsulated in block copolymer micelles without disrupting the structure of aggregates.      

Self-assemblies of magnetic nanoparticles and di-block copolymers: Magnetic micelles and vesicles

Magnetic nanocomposites are obtained by the self-assembly in water of polypeptide-based di-block copolymers polybutadiene-b-poly(glutamic acid) combined with hydrophobic γ-Fe₂O₃ nanoparticles. These hybrid supramolecular objects are either—(3D) spherical micelles filled with a hydrophobic ferrofluid at a concentration as high as 45 vol% or—hollow vesicles with a (2D) magnetic membrane. In this last case, the organic amphiphile copolymers are able to confine the hydrophobic nanoparticles within the thin layer of polybutadiene blocks. We probe these objects by atomic force microscopy, by small-angle neutron scattering (SANS) and by light scattering. Furthermore, anisotropic SANS data bring the experimental evidence of the capability to modify the shape of the mineralized membranes in response to a magnetic field intensity as low as 290 G.     

Experimental studies of the jamming behaviour of triblock copolymer solutions and triblock copolymer-anionic surfactant mixtures

Photon correlation spectroscopy and rheological measurements are performed to investigate the microscopic dynamics and mechanical responses of aqueous solutions of triblock copolymers and aqueous mixtures of triblock copolymers and anionic surfactants. Increasing the concentration of triblock copolymers results in a sharp increase in the magnitude of the complex moduli characterising the samples. This is understood in terms of the changes in the aggregation and packing behaviours of the copolymers and the constraints imposed upon their dynamics due to increased close packing. The addition of suitable quantities of an anionic surfactant to a strongly elastic copolymer solution results in a decrease in the complex moduli of the samples by several decades. It is argued that the shape anisotropy and size polydispersity of the micelles comprising mixtures cause dramatic changes in the packing behaviour, resulting in sample unjamming and the observed decrease in complex moduli. Finally, a phase diagram is constructed in the temperature-surfactant concentration plane to summarise the jamming-unjamming behaviour of aggregates constituting triblock copolymer-anionic surfactant mixtures.     

基于自洽场理论两亲高分子自组装的研究

运用扩展的自洽场和密度泛函理论(SCF/DFT),研究ABC蝌蚪形两亲高分子在稀溶剂中的自组装形态,其中蝌蚪形两亲高分子由线形嵌段共聚物链AB嫁接到球形纳米颗粒C上构成.与以往研究的线形ABC两亲高分子相比,蝌蚪形两亲高分子的自组装形态有着很大的不同.在粒子亲溶剂,嵌段共聚物疏溶剂时,各组分间弱分凝条件下,蝌蚪形两亲高分子自组装成胶球状形貌;在强分凝条件下,随着嵌段共聚物疏溶剂性的增强,两亲高分子的自组织态由胶球状转变成四角、三角状形貌,其中嵌段B主要分布在各角上.通过改变各组分间的相互作用,在嵌段A亲溶剂,嵌段B和粒子疏溶剂时,粒子呈平行棒状或小方块状分布在胶球中.     

Elasticity,fracture and thermoreversible gelation of highly filled physical gels<Superscript>⋆</Superscript>

We describe a physically associating triblock copolymer-based gel that exhibits a reversible transition between solid and liquid states at a temperature of approximately 55^°C. The thermal transition of the gel enables us to compare the properties of liquid suspensions and elastic composites with identical particle loadings, with particle volume fractions as large as 0.55. The suspension viscosity and the composite elasticity scale in a similar manner with the overall particle volume fraction, a result that is rationalized in terms of an effective strain amplification factor that depends only on the particle loading. Measured values of the strain amplification factor are in good agreement with the expected form for well-dispersed spheres. We also find that the elastic composites are exceptionally strong, with fracture strengths that exceed the modulus of the base gel by a factor of 100 or more. Deviations from purely elastic behavior became important for high particle volume fractions, and were probed by stress relaxation experiments.     

Two-dimensional micelle formation of polystyrene-poly(vinylpyridine) diblock copolymers on mice surfaces

We have used atomic force microscopy to study the adsorption of PolyStyrene-Poly(VinylPyridine) (PS-PVP) block copolymers from a selective solvent onto atomically smooth mica surfaces. At certain copolymer concentrations, we observe a highly regular array of spherical surface micelles covering macroscopic areas of the substrate surface. Evidence is given for a thin homogeneous layer underneath the micelles which is probably due to adsorption of free copolymer chains and brush formation prior to the formation of the micellar structures. We discuss the quality of the self-assembled structures regarding different types of defects and try to identify means for improving the long range periodicity of the structures.     

Imidazole derivatives as absorption probes for pluronics core-shell aggregates micropolarity investigation

Using the absorption probes 1-H-imidazol-1-yloxy-4,5-dihydro-4,4,5,5-tetramethyl-2-ethyl-3-oxide, 1-H-imidazol-1-yloxy-4,5-dihydro-4,4,5,5-tetramethyl-2-nitrophenyl-3-oxide, and 1-H-imidazol-1-yloxy-4,5-dihydro-4,4,5,5-tetramethyl-2-undecyl-3-oxide, the micropolarity of micellar aggregates formed in aqueous solutions of poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock copolymers, Pluronics L62, L64, and F127, as well as in reverse micellar systems of F127/butanol/water, has been investigated These absorption probes have different hydrophilic/hydrophobic features and solvatochromic properties. Their specific absorption parameters, sensitive to changes in micropolarity, were calibrated using the reference curves carried out in homogeneous tetraethyleneglycol/water mixtures. The probes were able to detect changes in the micelle micropolarity induced by hydration. Thus, with the help of calibration solutions, the effective local hydration of the polymeric chain sensed by the molecular probe solubilized in the guest aggregate was quantified and hypothetical relative locations of the probes in micelles have been proposed. The probes evidence differences in the micropolarity function of the structure (nature) and concentration of the Pluronic block copolymers.     

Multicanonical Monte Carlo simulations on intramolecular micelle formation in copolymers

The formation of intramolecular micelles in copolymers with periodic sequence, where hydrophobic units (stickers) are periodically placed along the chain, is studied by using multicanonical Monte Carlo computer simulations for an off-lattice bead-rod model in three dimensions. With decreasing the temperature, a transition from random-coil conformations to micelles occurs and flower-type micelles are formed via the transition. The number of stickers forming a micelle core is limited by the excluded-volume effect of loop chains around micelle cores. By this effect, two intramolecular micelles are formed for long polymer chains with 60 bonds via the coil-to-micelle transition. By further decreasing the temperature, we find that another transition, i.e., a micelle-to-micelle transition, takes place. At this transition point, the two intramolecular micelles merge into one micelle. Furthermore, we extend the multicanonical MC method to study elastic properties of single polymer chains with strong attractive interactions under external force fields, and study how the intramolecular micellization affects the elastic property of single polymer chains.     

Vesicle-to-micelle transition induced by grafted diblock copolymers

We study by small-angle neutron scattering the vesicle-to-micelle transition induced by anchoring diblock copolymers on the surfactant membranes. Vesicles are made using the ternary system SDS (sodium dodecyl sulfate)/octanol/PS-POE (polystyrene-polyoxyethylene), chosen as a model of more complex biological systems. The anchored polymer chains destabilize the membranes and lead to the formation of mixed polymer-surfactant micelles. We show that there is no influence of the polymer mass on the membranes destabilization. We compare this experimental result with recent theoretical predictions concerning the polymer-grafted membranes. We have a good agreement with predictions involving membrane curvature effects, and also with predictions focusing on more local deformations of membranes created by the grafted chains. Received 12 June 2001 and Received in final form 18 March 2002     

受限于纳米孔的星型ABC三嵌段共聚物自组装形成核-壳-柱状相

在不同条件、不同形状与尺寸孔隙下,星型ABC三嵌段共聚物自组装形成的核-壳-柱状相的相行为,纳米结构形成与小孔几何形状有关,不同表面势能对星型ABC三嵌段共聚物的自组装过程有影响.     

New approach in synthesis,characterization and release study of pH-sensitive polymeric micelles,based on PLA-Lys-<Emphasis Type="Italic">b</Emphasis>-PEGm,conjugated with doxorubicin

Amphiphilic block copolymers are well established as building blocks for the preparation of micellar drug carriers. The functional polymer micelles possess several advantages, such as high drug efficiency, targeted delivery, and minimized cytotoxicity. The synthesis of block copolymers using nano-structured templates has emerged as a useful and versatile approach for preparing drug carriers. Here, we report the synthesis of a smart polymeric compound of a diblock PLA-Lys-b-PEG copolymer containing doxorubicin. We have synthesized functionalized diblock copolymers, with lysinol, poly(lactide) and monomethoxy poly(ethylene glycol) via thermal ring-opening polymerization and a subsequent six-step substitution reaction. A variety of spectroscopic methods were employed here to verify the product of our synthesis. ¹H-Nuclear magnetic resonance and Fourier transform infrared studies validated the expected synthesis of copolymers. Doxorubicin is chemically loaded into micelles, and the ex vitro release can be evaluated either in weak acidic or in SBF solution by UV–vis spectroscopy. Dynamic light scattering, thermo gravimetric analysis, and size exclusion chromatography have also been used.     

Collective dynamics and self-diffusion in a diblock copolymer melt in the body-centered cubic phase

The structure and dynamics of a strongly asymmetric poly(ethylene propylene)-poly(dimethylsiloxane) (PEP-PDMS) diblock copolymer in the melt have been studied over a wide temperature range. Small-angle neutron scattering reveals that the sample exhibits two stable phases in this temperature range: Above the order-to-disorder transition temperature, it is disordered, whereas the domain structure is body-centered cubic (bcc) below, being stable down to the lowest temperatures measured. In the disordered state, dynamic light scattering (DLS) in the polarized geometry reveals the heterogeneity mode and the cluster mode. In the bcc phase, the PEP and the PDMS blocks form the micellar cores and the matrix, respectively. Here, two modes are observed in DLS, and the diffusion coefficients measured using pulsed field gradient (PFG) NMR are broadly distributed with the most probable diffusion coefficient coinciding with the slow DLS mode. We attribute the fast process in the bcc state to concentration fluctuations of the micellar cores (PEP), relaxing by mutual diffusion of the micelles with copolymers dissolved in the PDMS matrix. The slower process in the bcc state is ascribed to activated long-range self-diffusion of single copolymers from micelle to micelle through the PDMS matrix. This assignment is corroborated by the good coincidence of the reduced diffusivities with the ones from the literature. However, this mode may also be assigned to the rearrangement of entire micelles.This paper is dedicated to the memory of G. Fleischer     

Amphiphilic block copolymer nanocontainers as bioreactors

Self-assembly of an amphiphilic triblock copolymer carrying polymerizable end-groups is used to prepare nanometer-sized vesicular structures in aqueous solution. The triblock copolymer shells of the vesicles can be regarded as a mimetic of biological membranes although they are 2 to 3 times thicker than a conventional lipid bilayer. Nevertheless, they can serve as a matrix for membrane-spanning proteins. Surprisingly, the proteins remain functional despite the extreme thickness of the membranes and that even after polymerization of the reactive triblock copolymers. This opens a new field to create mechanically stable protein/polymer hybrid membranes. As a representative example we functionalize (polymerized) triblock copolymer vesicles by reconstituting a channel-forming protein from the outer cell wall of Gram-negative bacteria. The protein used (OmpF) acts as a size-selective filter, which allows only for passage of molecules with a molecular weight below 400 g mol^-1. Therefore substrates may still have access to enzymes encapsulated in such protein/polymer hybrid nanocontainers. We demonstrate this using the enzyme β-lactamase which is able to hydrolyze the antibiotic ampicillin. In addition, a transmembrane voltage above a given threshold causes a reversible gating transition of OmpF. This can be used to reversibly activate or deactivate the resulting nanoreactors. Received 22 August 2000     

Stabilization and controlled association of superparamagnetic nanoparticles using block copolymers

Mixing in aqueous solutions polyelectrolyte-neutral block copolymers with oppositely charged species, spontaneously forms stable core-shell complexes, which are electrostatically driven. We report here on the structural and orientational properties of such mixed magnetic nanoclusters made of magnetic iron oxide nanoparticles (MNPs) and polyelectrolyte-neutral block copolymers. Small angle neutron scattering and transmission electron microscopy experiments allows to probe the inner-core nanoparticle organization, leading to an average interparticle distance and confirming the hierarchical internal structure of the clusters. Thanks to the MNP optical anisotropy, we also probe the under-magnetic field orientational properties of the core-shell clusters and their dynamical rotational relaxation.