Carbon nanotubes supported Pt-Ni catalysts and their properties for the liquid phase hydrogenation of cinnamaldehyde to hydrocinnamaldehyde

The Pt-Ni catalysts supported on CNTs have been prepared by wet impregnation and the selective hydrogenation of cinnamaldehyde (CMA) to the corresponding hydrocinnamaldehyde (HCMA) over the catalysts has been studied in ethanol at different reaction conditions. The results show that Pt-0.34 wt% Ni/CNTs catalyst exhibits the highest activity and selectivity at a reaction temperature of 70 °C under a pressure of around 2.0 MPa, and 98.6% for the conversion of CMA and 88.2% for the selectivity of CMA to HCMA, respectively. The selective hydrogenation for the CC bond in CMA would be improved as increasing the reaction temperature, and the hydrogenation for the CO bond in CMA is enhanced as increasing the H₂ pressure. In addition, these catalysts have also been characterized using TEM-EDS, XPS, H₂-TPR and H₂-TPD techniques. The results show that Pt particles are dispersed more homogeneously on the outer surface of the nanotubes, while the strong interaction between Pt and Ni would improve the increasing of activated hydrogen number because of the hydrogen spillover from reduced Pt⁰ onto CNTs and increase the catalytic activity and selectivity of CMA to HCMA.     

A selective [4 + 2]-like cycloaddition of α, β-unsaturated ketone on Si(1 1 1)-7 × 7

The interaction of ethyl vinyl ketone (EVK) with Si(1 1 1)-7 × 7 has been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. The disappearance of both stretching vibrations of CH₂ (3099 cm⁻¹) and CO (1684 cm⁻¹) coupled with the appearance of new CC stretching mode (1660 cm⁻¹) in the HREELS spectra of chemisorbed EVK clearly demonstrates the direct involvement of conjugated CC and CO bonds to form a SiC¹H₂C²HC³(C⁴H₂C⁵H₃)OSi surface species via [4 + 2]-like cycloaddition in a highly selective manner. In addition, XPS studies show that the C1s binding energies of C¹/C² and C³ upon chemisorption display chemical downshifts of 0.8 eV and 2.2 eV, respectively, further confirming the proposed [4 + 2]-like cycloaddition reaction for the EVK/Si(1 1 1)-7 × 7 system. DFT theoretical calculations suggest that the proposed [4 + 2]-like cycloadduct is thermodynamically most favorable.     

Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

Site-blocking effects of preadsorbed H on Pt(1 1 1) probed by 1,3-butadiene adsorption and reaction

The influence of hydrogen coadsorption on hydrocarbon chemistry on transition metal surfaces is a key aspect to an improved understanding of catalytic selective hydrogenation. We have investigated the effects of H preadsorption on adsorption and reaction of 1,3-butadiene (H₂CCHCHCH₂, C₄H₆) on Pt(1 1 1) surfaces by using temperature-programmed desorption (TPD) and Auger electron spectroscopy (AES). Preadsorbed hydrogen adatoms decrease the amount of 1,3-butadiene chemisorbed on the surface and chemisorption is completely blocked by the hydrogen monolayer (saturation) coverage (θ_H = 0.92 ML). No hydrogenation products of reactions between coadsorbed H adatoms and 1,3-butadiene were observed to desorb in TPD experiments over the range of θ_H investigated (θ_H = 0.6-0.9 ML). This is in strong contrast to the copious evolution of ethane (CH₃CH₃, C₂H₆) from coadsorbed hydrogen and ethylene (CH₂CH₂, C₂H₄) on Pt(1 1 1). Hydrogen adatoms effectively (in a 1:1 stoichiometry) remove sites from interaction with chemisorbed 1,3-butadiene, but do not affect adjacent sites. The adsorption energy of coadsorbed 1,3-butadiene is not affected by the presence of hydrogen on Pt(1 1 1). The chemisorbed 1,3-butadiene on hydrogen preadsorbed Pt(1 1 1) completely dehydrogenates to H₂ and surface carbon upon heating without any molecular desorption detected, which is identical to that observed on clean Pt(1 1 1). In addition to revealing aspects of site blocking that should have broad implications for hydrogen coadsorption with hydrocarbon molecules on transition metal surfaces in general, these results also provide additional basic information on the surface science of selective catalytic hydrogenation of butadiene in butadiene-butene mixtures.     

A theoretical study of c-C5H8 adsorption on Ge (0 0 1)-2 × 1 and on dimer vacancies on the surface: Electronic structure and bonding

In this work we analyzed the geometry and the chemical interactions for c-C₅H₈ adsorption on Ge (0 0 1), using density functional theory calculations (DFT). We examined the changes in the atomic interactions using a slab model. We considered two cases, the cyclopentene adsorption on Ge(0 0 1) and on dimer vacancies on the surface. We found an average distance H-Ge, -C-Ge and C-Ge of 1.50, 1.70 and 1.65 Å, respectively, on dimer vacancies; and an average C-Ge distance of 2.05 Å on Ge-Ge dimer. We also computed the density of states (DOS) and the DOS weighted overlap populations (OPDOS) corresponding to C-C, C-Ge, C-H, and Ge-Ge bonds. During adsorption the main contribution are the CC double bond in both cases, and the next C and the H's belonging to this bonds in the case of adsorption on dimer vacancies. The orbital contribution includes participation of the 2p_y and 2p_z orbitals corresponding to unsaturated C atoms, 2p_z corresponding to side saturated C, and the 4p orbitals of Ge for the adsorption on dimer vacancies; 2s and 2p_z orbitals corresponding to double bond C atoms, 4s and 4p_z orbitals of Ge for the adsorption on Ge(0 0 1).     

Selective surface chemistry of allyl alcohol and allyl aldehyde on Si(1 0 0)2×1: Competition of [2 + 2] CC cycloaddition with O-H dissociation and with [2 + 2] CO cycloaddition in bifunctional molecules

Competition between the CC functional group with the OH group in allyl alcohol and with the CO group in allyl aldehyde in the adsorption and thermal chemistry on Si(1 0 0)2×1 has been studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD), as well as density-functional theory (DFT) calculations. The similarities found in the C 1s and O 1s spectra for both molecules indicate that the O-H dissociation product for allyl alcohol and [2 + 2] CO cycloaddition product for allyl aldehyde are preferred over the corresponding [2 + 2] CC cycloaddition products. Temperature-dependent XPS and TPD studies further show that thermal evolution of these molecules gives rise to the formation of ethylene, acetylene, and propene on Si(1 0 0)2×1, with additional CO evolution only from allyl alcohol. The formation of these desorption products also supports that the [2 + 2] CC cycloaddition reaction does not occur. In addition, the formation of SiC at 1090 K is observed for both allyl alcohol and allyl aldehyde. We propose plausible surface-mediated reaction pathways for the formation of these thermal evolution products. The present work illustrates the crucial role of the Si(1 0 0)2×1 surface in selective reactions of the Si dimers with the O−H group in allyl alcohol and with the CO group in allyl aldehyde over the CC functional group common to both molecules.     

Anharmonic force field and equilibrium structure of nitric acid

The quadratic, cubic and semi-diagonal quartic force field of nitric acid has been calculated at the CCSD(T) level of theory employing a basis set of triple-ζ quality. A semi-experimental equilibrium structure has been derived from experimental ground state rotational constants and rovibrational interaction parameters calculated from the ab initio force field. It is found that the A and B semi-experimental equilibrium rotational constants of the ¹⁸O isotopologues (for which the rotation of principal axes is large) cannot be accurately reproduced. This problem is discussed and a remedy is proposed. Finally, the semi-experimental structure is in agreement with the ab initio structure calculated at the CCSD(T) level of theory using a basis set of at least quadruple-ζ quality and a core correlation correction, except for the long NO single bond for which the CCSD(T) value is too short due to inadequate treatment of electron correlation. The empirical structures are also determined and their accuracy is discussed. The best equilibrium structure is: r_e(NO_syn) = 1.209(1) Å, r_e(NO_anti) = 1.194(1) Å, r_e(NO) = 1.397(1) Å, r_e(OH) = 0.968(1) Å, ∠(ONO_syn) = 115.8(1)°, ∠(ONO_anti) = 114.2(1)° and ∠(NOH) = 102.2(1)°.     

Chemistry of l-proline on Pd(1 1 1): Temperature-programmed desorption and X-ray photoelectron spectroscopic study

The surface chemistry of proline is explored on Pd(1 1 1) using a combination of temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy. Proline adsorbs on Pd(1 1 1) at temperatures of 250 K and below into second and subsequent layers prior to the saturation of the first layer, where approximately 70% of the adsorbed proline is present in its zwitterionic form. Molecular proline desorbs between ∼315 K and ∼333 K depending on coverage. When adsorbed at ∼300 K, only the first monolayer is formed, and the proline is present as zwitterions, oriented such that all of the carbons are detected equally by XPS. Proline decomposes by scission of the C-COO bond, where the carboxylate moiety desorbs as carbon monoxide and carbon dioxide, while the nitrogen-containing moiety desorbs as to HCN, and evolves pyrrole at ∼390 K, pyrrolidine at ∼410 K, and final species that desorbs at ∼450 K that cannot be unequivocally assigned but may be 2-butenenitrile (CH₃-CHCH-CN), 3-butenenitrile (CH₂CH-CH₂-CN), 2-methyl-2-propenenitrile (CH₂C(CH₃)-CN) or cyclopropanecarbonitrile.