C<Subscript>60</Subscript> fullerene decoration of carbon nanotubes

A new fully carbon nanocomposite material is synthesized by the immersion of carbon nanotubes in a fullerene solution in carbon disulfide. The presence of a dense layer of fullerene molecules on the outer nanotube surface is demonstrated by TEM and XPS. Fullerenes are redistributed on the nanotube surface during a long-term action of an electron beam, which points to the existence of a molecular bond between a nanotube and fullerenes. Theoretical calculations show that the formation of a fullerene shell begins with the attachment of one C₆₀ molecule to a defect on the nanotube surface.     

Quasi-one-dimensional fullerene-nanotube composites: Structure, formation energetics, and electronic properties

Carbon nanotubes coated with close-packed C₆₀ (or C₇₀) fullerenes, which are “attached” to the nanotubes by van der Waals forces, are considered and classified as a new class of nanocomposites. Semiempirical and molecular-dynamics calculations reveal the most energetically stable systems and show that a topological (Stone-Wales) defect on a nanotube can promote a more favorable “attachment” of fullerene to the nanotube. It has been shown that the molecular interaction of the fullerene coating with the nanotube leads to a significant change in its electronic spectrum, namely, to the formation of minibands including a large number of branches associated with the lift of the degeneracy of levels of C₆₀ and to the consolidation of branches of the carbon nanotube into the Brillouin zone smaller than that in the carbon nanotube. This fact should strongly change the interaction of light with such a nanocomposite as compared to carbon nanotubes and fullerenes, which provides prospect of its application in photovoltaics.     

Long fine single-wall carbon nanotube growth by Nano-spin-threading: model schematics and simulations

We have investigated model schematics for a long fine single-wall carbon nanotube growth inside a larger diameter nanotube. Our proposed schematics are as follows: fullerenes are encapsulated into the nano-channel connected with fullerene storage tank; and then a inner nanotube grows via fullerene coalescence under 1200 °C in the nano-channel. Then the grown carbon nanotube is extracted from the nano-channel by mechanical control. We have investigated fullerene mergence inside single-wall carbon nanotube using classical molecular dynamics simulations based on the Tersoff–Brenner potential and the Lennard–Jones potential. During fullerene-encapsulating, since the fullerenes naturally have the kinetic energies due to the suction force and can be also accelerated by external force fields to improve the fullerene encapsulation rate, they can be migrated toward the other side of the nano-channel with kinetic energies. Our molecular dynamics simulations showed that the structural relaxation of dynamically free atoms affected on the growth of inner carbon nanotube rather than the Stone-Wales transformations. Since the broken bonds make the structural relaxation during merging to be easily achieved from the migration of carbon atoms or carbon chains, the inner nanotube grows via the re-bonding-reactions of dynamically free carbon atoms or chains as well as the Stone-Wales transformations. We could conclude that the growth rate of the inner CNT could be increased when bond-breakings between carbon atoms of fullerenes were easily achieved.     

Structurization of hydrogen molecules during carbon nanotube filling

Certain forms of ordering of hydrogen molecules have been discovered during their alternate inflow into a carbon nanotube and outflow from it, and also during their further withdrawal, confinement, and accumulation in the nanotube with a lid in the form of half a fullerene molecule at one of its ends. It is shown that hydrogen forms a peculiar chain of molecules that extends along the nanotube axis. In this case, the molecules also turn out to be oriented along the axis. Estimates of the nanotube filling and the increase in the nanotube lengths and diameters are given.     

Nanotube bundle oscillators: Carbon and boron nitride nanostructures

In this paper, we investigate the oscillation of a fullerene that is moving within the centre of a bundle of nanotubes. In particular, certain fullerene–nanotube bundle oscillators, namely C₆₀-carbon nanotube bundle, C₆₀-boron nitride nanotube bundle, B₃₆N₃₆-carbon nanotube bundle and B₃₆N₃₆-boron nitride nanotube bundle are studied using the Lennard–Jones potential and the continuum approach which assumes a uniform distribution of atoms on the surface of each molecule. We address issues regarding the maximal suction energies of the fullerenes which lead to the generation of the maximum oscillation frequency. Since bundles are also found to comprise double-walled nanotubes, this paper also examines the oscillation of a fullerene inside a double-walled nanotube bundle. Our results show that the frequencies obtained for the oscillation within double-walled nanotube bundles are slightly higher compared to those of single-walled nanotube bundle oscillators. Our primary purpose here is to extend a number of established results for carbon to the boron nitride nanostructures.     

Electronic and optical properties of fullerene nanostructures

Two new types of molecular/electronic fullerene nanostructures are considered: 1) highly stable hydrated clusters (I _h symmetry group) and microcrystals (T _h symmetry group) of fullerene C₆₀ in water solution and 2) the single-walled carbon nanotube from C₆₀ fullerenes. The vibrational spectra of these fullerene nanostructures are calculated using molecular dynamics. The electronic properties of a single-walled fullerene nanotube are investigated using the tight-binding method. The theoretical results obtained were compared with available experimental data. Fiz. Tverd. Tela (St. Petersburg) 41, 885–887 (May 1999) Published in English in the original Russian journal. Reproduced here with stylistic changes by the Translation Editor.     

Tubular fullerenes inside carbon nanotubes: optimal molecular orientation versus tube radius

We present an investigation of the orientations and positions of tubular fullerene molecules (C₉₀, ..., C₂₀₀) encapsulated in single-walled carbon nanotubes (SWCNT), a series of so-called fullerene nanopeapods. We find that increasing the tube radius leads to the following succession of energetically stable regimes: (1) lying molecules positioned on the tube's long axis; (2) tilted molecules on the tube's long axis; and (3) lying molecules shifted away from the tube's long axis. As opposed to C₇₀ and C₈₀ molecules encapsulated in a SWCNT, standing orientations do not develop. Our results are relevant for the possible application of molecular-orientation-dependent electronic properties of fullerene nanopeapods, and also for the interpretation of future experiments on double-walled carbon nanotube formation by annealing fullerene peapod systems.     

Encapsulation of small fullerenes into nitrogenated holey nanotubes: a density functional theory study

Encapsulation of fullerene into nanotubes based on a C₂N sheet, known as nitrogenated holey graphene, was investigated using density functional theory. The structural and electronic properties of these carbon hybrid materials, consisting of nitrogenated holey nanotubes and a small C₂₀ fullerene, were studied. The formation energies showed that encapsulation of the fullerene into the nitrogenated holey nanotube is an exothermic process. To characterise the electronic properties, the electronic band structure and density of states of armchair and zigzag nitrogenated holey nanotubes were calculated. Filling these nanotubes with the C₂₀ fullerene resulted in a p-type semiconducting character. The energy band gap of the nitrogenated holey nanotubes decreased with fullerene encapsulation. The results are indicative of the possibility of band gap engineering by encapsulation of small fullerenes into nitrogenated holey nanotubes.     

First-principle study of the electronic transport properties of a new dumbbell-like carbon nanocomposite

Using a first-principle density functional theory and non-equilibrium Green's function formalism for quantum transport calculation, we have investigated the electronic transport properties of a new dumbbell-like carbon nanocomposite, in which one carbon nanotube segment is capped with two C₆₀ fullerenes. Our results show that the current–voltage curve reveals a highly nonlinear feature. A negative differential resistance (NDR) behavior is obtained at a very low bias, which is expected to be helpful for the development of low bias NDR-based molecular devices. Moreover, the carbon nanotube length and fullerene type can affect the NDR behavior strongly. The electronic transport is analyzed from the transmission spectra and the molecular projected self-consistent Hamiltonian states under different applied biases.     

Nucleation of single-walled carbon nanotubes

The nucleation pathway for single-wall carbon nanotubes on a metal surface is demonstrated by a series of total energy calculations using density functional theory. Incorporation of pentagons at an early stage of nucleation is energetically favorable as they reduce the number of dangling bonds and facilitate curvature of the structure and bonding to the metal. In the presence of the metal surface, nucleation of a closed cap or a capped single-wall carbon nanotube is overwhelmingly favored compared to any structure with dangling bonds or to a fullerene.