首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 106 毫秒
1.
针对基于北京正负电子对撞机的慢正电子强束流系统对输运磁场的设计要求,本文对不同规格的磁场输运线圈模型、长螺线管端口处磁场的补偿以及地磁场和弯管道对正电子束流的影响等进行了计算,提出适用于本系统传输慢正电子束流的输运磁场分布、补偿线圈、调整线圈的加工参数,计算表明,系统的总体磁场不均匀度小于10髎.实际运行束流测试表明,所设计的磁场系统能够很好的将慢正电子束流输运到约16m远的样品测量室,慢正电子束斑尺寸基本没有变化,满足慢正电子束流系统的设计要求.  相似文献   

2.
北京慢正电子强束流依托于北京正负电子对撞机(BEPC)电子直线加速器(LINAC),利用其完成注入后的剩余时间,产生高强度、高亮度、低能单色正电子束流,应用于材料科学尤其是材料表面特性的研究。该装置的建成弥补了我国现有的基于放射性同位素的慢正电子束流装置正电子强度较弱的不足,拓展了慢正电子技术在材料科学和微观核探针方法学中的应用领域,为进一步建立慢正电子湮没寿命测量、正电子诱导俄歇电子能谱测量以及低能正电子衍射和正电子显微镜等方法奠定了基础。  相似文献   

3.
王冠博  李润东  杨鑫  曹超  张之华 《物理学报》2017,66(8):82802-082802
研究堆慢正电子源是获得高强度慢正电子束流的有效方式,国际上己建成多座装置并获得广泛应用.与常规同位素慢正电子源相比,研究堆慢正电子源的物理过程复杂,影响末端束流强度的因素众多,对其进行深入研究与合理建模是未来在中国绵阳研究堆(CMRR)上构建慢正电子源的基础.本文厘清了研究堆慢正电子产生的关键过程与物理机理,建立了预测末端正电子束流强度的理论模型,找到了影响其末端强度的主要物理量:快正电子体产生率、慢化体有效表面积、慢化体扩散距离、慢正电子从表面被提取到靶环末端的效率、及束流系统提取效率.用多种实验结果对模型进行校验,包括多个同位素慢正电子源的效率测量值,以及PULSTAR研究堆慢正电子源测量结果,充分验证了模型正确性.根据模型对各物理量的影响因素进行了分析,找到了需着重关注的影响因素,对未来源/靶结构的设计给出建议.  相似文献   

4.
在基于加速器的北京慢正电子强束流装置上, 用Penning-Trap技术实现了脉冲慢正电子束流的存储和直流化. 实验表明, 系统的真空度对正电子的存储效率有严重影响, 脉冲正电子的释放方式决定了直流化后束流的能量分散; 改变释放级信号波形以及释放方式可以得到能量分散小于1eV的准直流化慢正电子束流.  相似文献   

5.
 电子束流寿命是个很重要的指标,直接影响合肥光源的正常运行,为此研究了影响束流寿命的因素,测量了高频腔压、耦合度以及束团长度对电子束流寿命的影响,研究显示合肥储存环的电子束流真空寿命和托歇克寿命相当;并且利用束损系统测量了因托歇克寿命的变化而造成束流损失的相对变化;通过增加耦合度增加束流的垂直发射度,有效地提高了束流的寿命,保证了合肥光源的正常运行。  相似文献   

6.
北京慢正电子强束流是利用北京正负电子对撞机电子直线加速器电子打靶产生的高强度低能单色正电子束流. 为了提高强束流的机时利用效率和节省强束流用于新建实验站的调试机时, 设计了一套基于22Na放射源的慢正电子束流装置插入到强束流输运线上. 22Na放射源慢正电子束流插入装置主要包括22Na放射源及慢化体、E×B能量选择器、多级静电加速管、磁场输运系统、真空系统、高压绝缘和辐射防护措施等.  相似文献   

7.
BEPCⅡ直线加速器的重大改造旨在获得高流强、小发射度和小能散的正负电子束, 以满足对撞机亮度提高两个两级的要求. 这对直线加速器各系统和束流物理是一个挑战. 文章介绍了直接决定束流性能的新电子源、新正电子源、新微波功率源、相位控制系统和束流测量系统等的改造情况; 叙述了束流物理研究; 介绍了束流调试进展情况和进一步改进计划.  相似文献   

8.
低能单色正电子束装置的原理、研制及应用   总被引:1,自引:0,他引:1  
王天民 《物理》1999,28(9):572-575
简要介绍了一种新的灵敏核探针--低能单色正电子(慢正电子)束流装置的原理及应用。同时介绍了北京慢正电子束流装置的建设进展情况。  相似文献   

9.
BEPCⅡ重大改造工程要求将对撞机的峰值亮度提高近百倍,并具有高积分亮度,为此必须对作为注入器的直线加速器进行重大改造,提供高能、强流、小发射度和小能散度的正负电子束,达到高注入速率(正电子50mA/min.)的要求.这对直线加速器各系统和束流调试是一个挑战.在成功建造了新电子源、新正电子源、新微波功率源、相位控制系统和束流轨道测量系统等的基础上,着重叙述了束流参数的调试结果,束流能量、能散度、发射度、传输效率均达到(或优于)设计指标.描述了束流参数稳定性的研究、改进和成功地达到稳定运行.最后简述了新建中的次谐波聚束系统,以进一步提高束流性能和注入速率.  相似文献   

10.
BEPCⅡ直线注入器中的强流、短束团的尾场效应将损害束流的性能.用分析解和数值模拟计算的方法,系统地研究了尾场对纵向和径向束流动力学的影响,包括单束团的短程尾场和多束团的长程尾场对束流能量、能散、发射度、轨道和初级电子束在正电子产生靶上束斑尺寸的影响等.研究了有效抑制这些尾场效应的措施.  相似文献   

11.
The Beijing intense slow positron beam facility is based on the 1.3 GeV linac of Beijing ElectronPositron CoUider (BEPC) aiming to produce mono-energetic intense slow positron beam for material science investigation. The plugged-in 22Na based slow positron beam section has been newly constructed to supply continuous beam time for the debugging of positron annihilation measurement stations and improve the Beijing intense slow positron beam time using efficiency. Performance testing result of the plugged-in 22Na based slow positron beam facility are reviewed in this paper, with the measurement of the beam transport efficiency, the view of beam spot, the adjustment of beam position, the measurement of beam intensity and energy spread etc. included.  相似文献   

12.
郁伟中  袁佳平 《物理》2001,30(2):95-100
正电子湮没技术是一种研究材料的微观缺陷和相变的灵敏工具,在通常的正电子谱仪中,正电子能量为MeV量级,在样品中注入深度比较学(-100μm),主要研究材料体内的平均缺陷密度,慢正电子束方法把正电子的能量降低为keV量级(而且可以调节),注入比较浅(-μm),所以是研究表面缺陷的探测手段,正电子慢化体是产生慢正电子的关键设备,对其研究有重要意义,文章综述了慢化体研究的历史和现状,从物理概念出发介绍使正电子慢化的四种可能方法和当今慢化体的五种几何排列方法,其中应用最广泛的是钨慢化体和百叶窗式的排列方式,效率最高的是惰性气体固体慢化体,而加电场慢化体是有待开发的高效慢化体。  相似文献   

13.
A new slow pulsed positron beam, including a positron source, a moderator, a chopper, a pre-buncher, a main-buncher and a sample chamber, etc, has been installed and tested. It is necessary to simulate the acceleration, transportation and space focusing of positrons to meet the needs of beam debugging and further positron annihilation experiments. The result from SIMION simulations shows that the radius of the focused positron beam is less than 5 mm, which is further confirmed in our practical debugging process.  相似文献   

14.
The new research reactor FRM-II near Munich has a strong positron source, which delivers an intense, nearly monoenergetic positron beam. Our positron systems, the pulsed low energy positron source (PLEPS) and the scanning positron microscope (SPM) will be operated at this beam. Some aspects of matching these systems to the new positron source will be discussed.Considerable improvements are expected, e.g. more than 105 s−1 recorded events at PLEPS and sub-micrometre resolution at SPM. They will enable investigations in so far inaccessible problems like the evaluation of annihilation characteristics and trapping constants of individual defects or studies of fast dynamical processes. In applied materials science complex defect structures will be studied which demand a resolution into many differing lifetimes, e.g. fractured specimens, wear, corrosion, etc. Also large series of measurements at small systematic modifications are planned. There is also the opportunity to analyse in addition the chemical microstructure of the specimens by means of a hydrogen microprobe and other ion beam techniques available close to FRM-II at the Technical University of Munich.  相似文献   

15.
王书鸿  金凯  周峰 《中国物理 C》2005,29(5):495-500
TESLA 行波正电子注入器采用L波段常温加速结构,它同时具有高分路阻抗和大孔径的优点.经系统地束流模拟计算,设计了正电子注入器的主要参数.束流模拟结果表明,在注入器出口可获得满意的束流传输效率和优质的束流性能.  相似文献   

16.
A new type positron beam system is being constructed in Wuhan university. The goal of this project is to build a positron beam which can measure positron lifetimes and has high moderation efficiency. The system utilizes a magnetically guided incident positron beam and the sample is biased to a high negative potential to achieve the desired implantation energies. A conventional tungsten moderator is replaced by a solid Ne moderator with high moderation efficiency (about 1%). A multi-functional target chamber for slow beam studies is designed, which can be used for positron annihilation lifetime spectroscopy (PALS), Doppler broadening (DB) and coincidence Doppler broadening (CDB) measurements.  相似文献   

17.
An intense slow positron beam using a 15 MeV LINAC (average current 1.25 × 1015 e/s) at the Radiation and Photochemistry Group, Chemistry Division of Argonne National Laboratory (ANL) has been proposed and studied. Computer simulated results optimizing the positron yield and distribution of energy and angle show that a slow positron production at 1010 e+/s is possible. A proposed design of an intense slow positron beam with optimal conditions of incident electron, converter/moderator configurations, and extraction/transportation is presented.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号